Release 4.7 drivers/usb/host/ehci-pci.c

/*
 * EHCI HCD (Host Controller Driver) PCI Bus Glue.
 *
 * Copyright (c) 2000-2004 by David Brownell
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>

#include "ehci.h"
#include "pci-quirks.h"


#define DRIVER_DESC "EHCI PCI platform driver"


static const char hcd_name[] = "ehci-pci";

/* defined here to avoid adding to pci_ids.h for single instance use */

#define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70

/*-------------------------------------------------------------------------*/

#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC		0x0939


static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
{
	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
		pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
bryan o'donoghue
bryan o'donoghue
25
100.00%
1
100.00%
Total
25
100.00%
1
100.00%

/*
 * This is the list of PCI IDs for the devices that have EHCI USB class and
 * specific drivers for that. One of the example is a ChipIdea device installed
 * on some Intel MID platforms.
 */

static const struct pci_device_id bypass_pci_id_table[] = {
	/* ChipIdea on Intel MID platform */
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), },
	{}
};



static inline bool is_bypassed_id(struct pci_dev *pdev)
{
	return !!pci_match_id(bypass_pci_id_table, pdev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andy shevchenko
andy shevchenko
22
100.00%
2
100.00%
Total
22
100.00%
2
100.00%

/*
 * 0x84 is the offset of in/out threshold register,
 * and it is the same offset as the register of 'hostpc'.
 */

#define	intel_quark_x1000_insnreg01	hostpc

/* Maximum usable threshold value is 0x7f dwords for both IN and OUT */

#define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD	0x007f007f

/* called after powerup, by probe or system-pm "wakeup" */


static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
{
	int			retval;

	/* we expect static quirk code to handle the "extended capabilities"
         * (currently just BIOS handoff) allowed starting with EHCI 0.96
         */

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	retval = pci_set_mwi(pdev);
	if (!retval)
		ehci_dbg(ehci, "MWI active\n");

	/* Reset the threshold limit */
	if (is_intel_quark_x1000(pdev)) {
		/*
                 * For the Intel QUARK X1000, raise the I/O threshold to the
                 * maximum usable value in order to improve performance.
                 */
		ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD,
			ehci->regs->intel_quark_x1000_insnreg01);
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
david brownell
david brownell
36
53.73%
3
60.00%
bryan o'donoghue
bryan o'donoghue
24
35.82%
1
20.00%
matt porter
matt porter
7
10.45%
1
20.00%
Total
67
100.00%
5
100.00%

/* called during probe() after chip reset completes */


static int ehci_pci_setup(struct usb_hcd *hcd)
{
	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	u32			temp;
	int			retval;

	ehci->caps = hcd->regs;

	/*
         * ehci_init() causes memory for DMA transfers to be
         * allocated.  Thus, any vendor-specific workarounds based on
         * limiting the type of memory used for DMA transfers must
         * happen before ehci_setup() is called.
         *
         * Most other workarounds can be done either before or after
         * init and reset; they are located here too.
         */
	switch (pdev->vendor) {
	case PCI_VENDOR_ID_TOSHIBA_2:
		/* celleb's companion chip */
		if (pdev->device == 0x01b5) {
#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
			ehci->big_endian_mmio = 1;
#else
			ehci_warn(ehci,
				  "unsupported big endian Toshiba quirk\n");
#endif
		}
		break;
	case PCI_VENDOR_ID_NVIDIA:
		/* NVidia reports that certain chips don't handle
                 * QH, ITD, or SITD addresses above 2GB.  (But TD,
                 * data buffer, and periodic schedule are normal.)
                 */
		switch (pdev->device) {
		case 0x003c:	/* MCP04 */
		case 0x005b:	/* CK804 */
		case 0x00d8:	/* CK8 */
		case 0x00e8:	/* CK8S */
			if (pci_set_consistent_dma_mask(pdev,
						DMA_BIT_MASK(31)) < 0)
				ehci_warn(ehci, "can't enable NVidia "
					"workaround for >2GB RAM\n");
			break;

		/* Some NForce2 chips have problems with selective suspend;
                 * fixed in newer silicon.
                 */
		case 0x0068:
			if (pdev->revision < 0xa4)
				ehci->no_selective_suspend = 1;
			break;
		}
		break;
	case PCI_VENDOR_ID_INTEL:
		if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
			hcd->has_tt = 1;
		break;
	case PCI_VENDOR_ID_TDI:
		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI)
			hcd->has_tt = 1;
		break;
	case PCI_VENDOR_ID_AMD:
		/* AMD PLL quirk */
		if (usb_amd_find_chipset_info())
			ehci->amd_pll_fix = 1;
		/* AMD8111 EHCI doesn't work, according to AMD errata */
		if (pdev->device == 0x7463) {
			ehci_info(ehci, "ignoring AMD8111 (errata)\n");
			retval = -EIO;
			goto done;
		}

		/*
                 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
                 * read/write memory space which does not belong to it when
                 * there is NULL pointer with T-bit set to 1 in the frame list
                 * table. To avoid the issue, the frame list link pointer
                 * should always contain a valid pointer to a inactive qh.
                 */
		if (pdev->device == 0x7808) {
			ehci->use_dummy_qh = 1;
			ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
		}
		break;
	case PCI_VENDOR_ID_VIA:
		if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
			u8 tmp;

			/* The VT6212 defaults to a 1 usec EHCI sleep time which
                         * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
                         * that sleep time use the conventional 10 usec.
                         */
			pci_read_config_byte(pdev, 0x4b, &tmp);
			if (tmp & 0x20)
				break;
			pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
		}
		break;
	case PCI_VENDOR_ID_ATI:
		/* AMD PLL quirk */
		if (usb_amd_find_chipset_info())
			ehci->amd_pll_fix = 1;

		/*
                 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
                 * read/write memory space which does not belong to it when
                 * there is NULL pointer with T-bit set to 1 in the frame list
                 * table. To avoid the issue, the frame list link pointer
                 * should always contain a valid pointer to a inactive qh.
                 */
		if (pdev->device == 0x4396) {
			ehci->use_dummy_qh = 1;
			ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
		}
		/* SB600 and old version of SB700 have a bug in EHCI controller,
                 * which causes usb devices lose response in some cases.
                 */
		if ((pdev->device == 0x4386 || pdev->device == 0x4396) &&
				usb_amd_hang_symptom_quirk()) {
			u8 tmp;
			ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
			pci_read_config_byte(pdev, 0x53, &tmp);
			pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
		}
		break;
	case PCI_VENDOR_ID_NETMOS:
		/* MosChip frame-index-register bug */
		ehci_info(ehci, "applying MosChip frame-index workaround\n");
		ehci->frame_index_bug = 1;
		break;
	}

	/* optional debug port, normally in the first BAR */
	temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
	if (temp) {
		pci_read_config_dword(pdev, temp, &temp);
		temp >>= 16;
		if (((temp >> 13) & 7) == 1) {
			u32 hcs_params = ehci_readl(ehci,
						    &ehci->caps->hcs_params);

			temp &= 0x1fff;
			ehci->debug = hcd->regs + temp;
			temp = ehci_readl(ehci, &ehci->debug->control);
			ehci_info(ehci, "debug port %d%s\n",
				  HCS_DEBUG_PORT(hcs_params),
				  (temp & DBGP_ENABLED) ? " IN USE" : "");
			if (!(temp & DBGP_ENABLED))
				ehci->debug = NULL;
		}
	}

	retval = ehci_setup(hcd);
	if (retval)
		return retval;

	/* These workarounds need to be applied after ehci_setup() */
	switch (pdev->vendor) {
	case PCI_VENDOR_ID_NEC:
		ehci->need_io_watchdog = 0;
		break;
	case PCI_VENDOR_ID_INTEL:
		ehci->need_io_watchdog = 0;
		break;
	case PCI_VENDOR_ID_NVIDIA:
		switch (pdev->device) {
		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
                 * fetching device descriptors unless LPM is disabled.
                 * There are also intermittent problems enumerating
                 * devices with PPCD enabled.
                 */
		case 0x0d9d:
			ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
			ehci->has_ppcd = 0;
			ehci->command &= ~CMD_PPCEE;
			break;
		}
		break;
	}

	/* at least the Genesys GL880S needs fixup here */
	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
	temp &= 0x0f;
	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
		ehci_dbg(ehci, "bogus port configuration: "
			"cc=%d x pcc=%d < ports=%d\n",
			HCS_N_CC(ehci->hcs_params),
			HCS_N_PCC(ehci->hcs_params),
			HCS_N_PORTS(ehci->hcs_params));

		switch (pdev->vendor) {
		case 0x17a0:		/* GENESYS */
			/* GL880S: should be PORTS=2 */
			temp |= (ehci->hcs_params & ~0xf);
			ehci->hcs_params = temp;
			break;
		case PCI_VENDOR_ID_NVIDIA:
			/* NF4: should be PCC=10 */
			break;
		}
	}

	/* Serial Bus Release Number is at PCI 0x60 offset */
	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
		;	/* ConneXT has no sbrn register */
	else
		pci_read_config_byte(pdev, 0x60, &ehci->sbrn);

	/* Keep this around for a while just in case some EHCI
         * implementation uses legacy PCI PM support.  This test
         * can be removed on 17 Dec 2009 if the dev_warn() hasn't
         * been triggered by then.
         */
	if (!device_can_wakeup(&pdev->dev)) {
		u16	port_wake;

		pci_read_config_word(pdev, 0x62, &port_wake);
		if (port_wake & 0x0001) {
			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
			device_set_wakeup_capable(&pdev->dev, 1);
		}
	}

#ifdef	CONFIG_PM
	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
#endif

	retval = ehci_pci_reinit(ehci, pdev);
done:
	return retval;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
david brownell
david brownell
157
18.07%
4
14.29%
matt porter
matt porter
120
13.81%
1
3.57%
jason wessel
jason wessel
105
12.08%
1
3.57%
jan beulich
jan beulich
100
11.51%
1
3.57%
alan stern
alan stern
98
11.28%
5
17.86%
andiry xu
andiry xu
77
8.86%
3
10.71%
rene herman
rene herman
56
6.44%
1
3.57%
paul serice
paul serice
46
5.29%
1
3.57%
benjamin herrenschmidt
benjamin herrenschmidt
42
4.83%
1
3.57%
alessandro rubini
alessandro rubini
18
2.07%
1
3.57%
shane huang
shane huang
15
1.73%
1
3.57%
dirk brandewie
dirk brandewie
8
0.92%
1
3.57%
oliver neukum
oliver neukum
6
0.69%
1
3.57%
brian j. tarricone
brian j. tarricone
6
0.69%
1
3.57%
alek du
alek du
4
0.46%
1
3.57%
huang rui
huang rui
4
0.46%
1
3.57%
yang hongyang
yang hongyang
4
0.46%
1
3.57%
david s. miller
david s. miller
2
0.23%
1
3.57%
rafael j. wysocki
rafael j. wysocki
1
0.12%
1
3.57%
Total
869
100.00%
28
100.00%

/*-------------------------------------------------------------------------*/

#ifdef	CONFIG_PM

/* suspend/resume, section 4.3 */

/* These routines rely on the PCI bus glue
 * to handle powerdown and wakeup, and currently also on
 * transceivers that don't need any software attention to set up
 * the right sort of wakeup.
 * Also they depend on separate root hub suspend/resume.
 */



static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);

	if (ehci_resume(hcd, hibernated) != 0)
		(void) ehci_pci_reinit(ehci, pdev);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matt porter
matt porter
33
53.23%
1
11.11%
david brownell
david brownell
18
29.03%
2
22.22%
alan stern
alan stern
9
14.52%
4
44.44%
benjamin herrenschmidt
benjamin herrenschmidt
2
3.23%
2
22.22%
Total
62
100.00%
9
100.00%

#else


#define ehci_suspend		NULL

#define ehci_pci_resume		NULL
#endif	/* CONFIG_PM */


static struct hc_driver __read_mostly ehci_pci_hc_driver;


static const struct ehci_driver_overrides pci_overrides __initconst = {
	.reset =		ehci_pci_setup,
};

/*-------------------------------------------------------------------------*/



static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
	if (is_bypassed_id(pdev))
		return -ENODEV;
	return usb_hcd_pci_probe(pdev, id);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andy shevchenko
andy shevchenko
36
100.00%
2
100.00%
Total
36
100.00%
2
100.00%



static void ehci_pci_remove(struct pci_dev *pdev)
{
	pci_clear_mwi(pdev);
	usb_hcd_pci_remove(pdev);	
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
jia-ju bai
jia-ju bai
21
100.00%
1
100.00%
Total
21
100.00%
1
100.00%

/* PCI driver selection metadata; PCI hotplugging uses this */

static const struct pci_device_id pci_ids [] = { {
	/* handle any USB 2.0 EHCI controller */
	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
        }, {
	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
	.driver_data = (unsigned long) &ehci_pci_hc_driver,
        },
	{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);

/* pci driver glue; this is a "new style" PCI driver module */

static struct pci_driver ehci_pci_driver = {
	.name =		(char *) hcd_name,
	.id_table =	pci_ids,

	.probe =	ehci_pci_probe,
	.remove =	ehci_pci_remove,
	.shutdown = 	usb_hcd_pci_shutdown,

#ifdef CONFIG_PM
	.driver =	{
		.pm =	&usb_hcd_pci_pm_ops
	},
#endif
};



static int __init ehci_pci_init(void)
{
	if (usb_disabled())
		return -ENODEV;

	pr_info("%s: " DRIVER_DESC "\n", hcd_name);

	ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);

	/* Entries for the PCI suspend/resume callbacks are special */
	ehci_pci_hc_driver.pci_suspend = ehci_suspend;
	ehci_pci_hc_driver.pci_resume = ehci_pci_resume;

	return pci_register_driver(&ehci_pci_driver);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
56
100.00%
2
100.00%
Total
56
100.00%
2
100.00%


module_init(ehci_pci_init);



static void __exit ehci_pci_cleanup(void)
{
	pci_unregister_driver(&ehci_pci_driver);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
15
100.00%
1
100.00%
Total
15
100.00%
1
100.00%


module_exit(ehci_pci_cleanup);


MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("David Brownell");
MODULE_AUTHOR("Alan Stern");
MODULE_LICENSE("GPL");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
272
18.71%
13
28.26%
matt porter
matt porter
261
17.95%
1
2.17%
david brownell
david brownell
215
14.79%
7
15.22%
jason wessel
jason wessel
105
7.22%
1
2.17%
jan beulich
jan beulich
100
6.88%
1
2.17%
andy shevchenko
andy shevchenko
99
6.81%
2
4.35%
andiry xu
andiry xu
77
5.30%
3
6.52%
bryan o'donoghue
bryan o'donoghue
63
4.33%
1
2.17%
rene herman
rene herman
56
3.85%
1
2.17%
paul serice
paul serice
46
3.16%
1
2.17%
benjamin herrenschmidt
benjamin herrenschmidt
44
3.03%
2
4.35%
alessandro rubini
alessandro rubini
37
2.54%
1
2.17%
jia-ju bai
jia-ju bai
22
1.51%
1
2.17%
shane huang
shane huang
15
1.03%
1
2.17%
dirk brandewie
dirk brandewie
13
0.89%
1
2.17%
brian j. tarricone
brian j. tarricone
6
0.41%
1
2.17%
oliver neukum
oliver neukum
6
0.41%
1
2.17%
huang rui
huang rui
4
0.28%
1
2.17%
yang hongyang
yang hongyang
4
0.28%
1
2.17%
alek du
alek du
4
0.28%
1
2.17%
david s. miller
david s. miller
2
0.14%
1
2.17%
jean delvare
jean delvare
1
0.07%
1
2.17%
rafael j. wysocki
rafael j. wysocki
1
0.07%
1
2.17%
andi kleen
andi kleen
1
0.07%
1
2.17%
Total
1454
100.00%
46
100.00%
  
Directory: drivers/usb/host

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.