Release 4.7 drivers/usb/host/ohci-at91.c

/*
 * OHCI HCD (Host Controller Driver) for USB.
 *
 *  Copyright (C) 2004 SAN People (Pty) Ltd.
 *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
 *
 * AT91 Bus Glue
 *
 * Based on fragments of 2.4 driver by Rick Bronson.
 * Based on ohci-omap.c
 *
 * This file is licenced under the GPL.
 */

#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/atmel.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>

#include "ohci.h"


#define valid_port(index)	((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)

#define at91_for_each_port(index)	\
		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)

/* interface, function and usb clocks; sometimes also an AHB clock */

#define hcd_to_ohci_at91_priv(h) \
	((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)


#define AT91_MAX_USBH_PORTS	3

struct at91_usbh_data {
	
int vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
	
int overcurrent_pin[AT91_MAX_USBH_PORTS];
	
u8 ports;				/* number of ports on root hub */
	
u8 overcurrent_supported;
	
u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
	
u8 overcurrent_status[AT91_MAX_USBH_PORTS];
	
u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
};


struct ohci_at91_priv {
	
struct clk *iclk;
	
struct clk *fclk;
	
struct clk *hclk;
	
bool clocked;
	
bool wakeup;		/* Saved wake-up state for resume */
};
/* interface and function clocks; sometimes also an AHB clock */


#define DRIVER_DESC "OHCI Atmel driver"


static const char hcd_name[] = "ohci-atmel";


static struct hc_driver __read_mostly ohci_at91_hc_driver;


static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
	.extra_priv_size = sizeof(struct ohci_at91_priv),
};

extern int usb_disabled(void);

/*-------------------------------------------------------------------------*/



static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
{
	if (ohci_at91->clocked)
		return;

	clk_set_rate(ohci_at91->fclk, 48000000);
	clk_prepare_enable(ohci_at91->hclk);
	clk_prepare_enable(ohci_at91->iclk);
	clk_prepare_enable(ohci_at91->fclk);
	ohci_at91->clocked = true;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andrew victor
andrew victor
21
38.89%
1
16.67%
sylvain rochet
sylvain rochet
20
37.04%
2
33.33%
boris brezillon
boris brezillon
13
24.07%
3
50.00%
Total
54
100.00%
6
100.00%



static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
{
	if (!ohci_at91->clocked)
		return;

	clk_disable_unprepare(ohci_at91->fclk);
	clk_disable_unprepare(ohci_at91->iclk);
	clk_disable_unprepare(ohci_at91->hclk);
	ohci_at91->clocked = false;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andrew victor
andrew victor
22
47.83%
1
25.00%
sylvain rochet
sylvain rochet
21
45.65%
2
50.00%
boris brezillon
boris brezillon
3
6.52%
1
25.00%
Total
46
100.00%
4
100.00%



static void at91_start_hc(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_regs __iomem *regs = hcd->regs;
	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);

	dev_dbg(&pdev->dev, "start\n");

	/*
         * Start the USB clocks.
         */
	at91_start_clock(ohci_at91);

	/*
         * The USB host controller must remain in reset.
         */
	writel(0, &regs->control);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andrew victor
andrew victor
53
77.94%
2
50.00%
sylvain rochet
sylvain rochet
13
19.12%
1
25.00%
david brownell
david brownell
2
2.94%
1
25.00%
Total
68
100.00%
4
100.00%



static void at91_stop_hc(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_regs __iomem *regs = hcd->regs;
	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);

	dev_dbg(&pdev->dev, "stop\n");

	/*
         * Put the USB host controller into reset.
         */
	writel(0, &regs->control);

	/*
         * Stop the USB clocks.
         */
	at91_stop_clock(ohci_at91);
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
andrew victor
andrew victor
53
77.94%
2
50.00%
sylvain rochet
sylvain rochet
13
19.12%
1
25.00%
david brownell
david brownell
2
2.94%
1
25.00%
Total
68
100.00%
4
100.00%

/*-------------------------------------------------------------------------*/

static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);

/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */


/**
 * usb_hcd_at91_probe - initialize AT91-based HCDs
 * Context: !in_interrupt()
 *
 * Allocates basic resources for this USB host controller, and
 * then invokes the start() method for the HCD associated with it
 * through the hotplug entry's driver_data.
 */


static int usb_hcd_at91_probe(const struct hc_driver *driver,
			struct platform_device *pdev)
{
	struct at91_usbh_data *board;
	struct ohci_hcd *ohci;
	int retval;
	struct usb_hcd *hcd;
	struct ohci_at91_priv *ohci_at91;
	struct device *dev = &pdev->dev;
	struct resource *res;
	int irq;

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		dev_dbg(dev, "hcd probe: missing irq resource\n");
		return irq;
	}

	hcd = usb_create_hcd(driver, dev, "at91");
	if (!hcd)
		return -ENOMEM;
	ohci_at91 = hcd_to_ohci_at91_priv(hcd);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	hcd->regs = devm_ioremap_resource(dev, res);
	if (IS_ERR(hcd->regs)) {
		retval = PTR_ERR(hcd->regs);
		goto err;
	}
	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

	ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
	if (IS_ERR(ohci_at91->iclk)) {
		dev_err(dev, "failed to get ohci_clk\n");
		retval = PTR_ERR(ohci_at91->iclk);
		goto err;
	}
	ohci_at91->fclk = devm_clk_get(dev, "uhpck");
	if (IS_ERR(ohci_at91->fclk)) {
		dev_err(dev, "failed to get uhpck\n");
		retval = PTR_ERR(ohci_at91->fclk);
		goto err;
	}
	ohci_at91->hclk = devm_clk_get(dev, "hclk");
	if (IS_ERR(ohci_at91->hclk)) {
		dev_err(dev, "failed to get hclk\n");
		retval = PTR_ERR(ohci_at91->hclk);
		goto err;
	}

	board = hcd->self.controller->platform_data;
	ohci = hcd_to_ohci(hcd);
	ohci->num_ports = board->ports;
	at91_start_hc(pdev);

	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (retval == 0) {
		device_wakeup_enable(hcd->self.controller);
		return retval;
	}

	/* Error handling */
	at91_stop_hc(pdev);

 err:
	usb_put_hcd(hcd);
	return retval;
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
andrew victor
andrew victor
141
37.70%
2
13.33%
jean-christophe plagniol-villard
jean-christophe plagniol-villard
76
20.32%
2
13.33%
boris brezillon
boris brezillon
54
14.44%
3
20.00%
manjunath goudar
manjunath goudar
33
8.82%
1
6.67%
sylvain rochet
sylvain rochet
30
8.02%
1
6.67%
varka bhadram
varka bhadram
23
6.15%
1
6.67%
peter chen
peter chen
10
2.67%
1
6.67%
nicolas ferre
nicolas ferre
3
0.80%
2
13.33%
david brownell
david brownell
2
0.53%
1
6.67%
arnd bergmann
arnd bergmann
2
0.53%
1
6.67%
Total
374
100.00%
15
100.00%

/* may be called with controller, bus, and devices active */

/**
 * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
 * @dev: USB Host Controller being removed
 * Context: !in_interrupt()
 *
 * Reverses the effect of usb_hcd_at91_probe(), first invoking
 * the HCD's stop() method.  It is always called from a thread
 * context, "rmmod" or something similar.
 *
 */


static void usb_hcd_at91_remove(struct usb_hcd *hcd,
				struct platform_device *pdev)
{
	usb_remove_hcd(hcd);
	at91_stop_hc(pdev);
	usb_put_hcd(hcd);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andrew victor
andrew victor
24
77.42%
1
33.33%
pete zaitcev
pete zaitcev
6
19.35%
1
33.33%
arnd bergmann
arnd bergmann
1
3.23%
1
33.33%
Total
31
100.00%
3
100.00%

/*-------------------------------------------------------------------------*/


static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
{
	if (!valid_port(port))
		return;

	if (!gpio_is_valid(pdata->vbus_pin[port]))
		return;

	gpio_set_value(pdata->vbus_pin[port],
		       pdata->vbus_pin_active_low[port] ^ enable);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
thomas petazzoni
thomas petazzoni
37
62.71%
1
20.00%
jean-christophe plagniol-villard
jean-christophe plagniol-villard
18
30.51%
3
60.00%
nicolas ferre
nicolas ferre
4
6.78%
1
20.00%
Total
59
100.00%
5
100.00%



static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
{
	if (!valid_port(port))
		return -EINVAL;

	if (!gpio_is_valid(pdata->vbus_pin[port]))
		return -EINVAL;

	return gpio_get_value(pdata->vbus_pin[port]) ^
		pdata->vbus_pin_active_low[port];
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
thomas petazzoni
thomas petazzoni
36
59.02%
1
20.00%
jean-christophe plagniol-villard
jean-christophe plagniol-villard
21
34.43%
3
60.00%
nicolas ferre
nicolas ferre
4
6.56%
1
20.00%
Total
61
100.00%
5
100.00%

/*
 * Update the status data from the hub with the over-current indicator change.
 */


static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
{
	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
	int length = ohci_hub_status_data(hcd, buf);
	int port;

	at91_for_each_port(port) {
		if (pdata->overcurrent_changed[port]) {
			if (!length)
				length = 1;
			buf[0] |= 1 << (port + 1);
		}
	}

	return length;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
thomas petazzoni
thomas petazzoni
78
93.98%
1
25.00%
nicolas ferre
nicolas ferre
2
2.41%
1
25.00%
manjunath goudar
manjunath goudar
2
2.41%
1
25.00%
laurent pinchart
laurent pinchart
1
1.20%
1
25.00%
Total
83
100.00%
4
100.00%

/*
 * Look at the control requests to the root hub and see if we need to override.
 */


static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
				 u16 wIndex, char *buf, u16 wLength)
{
	struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
	struct usb_hub_descriptor *desc;
	int ret = -EINVAL;
	u32 *data = (u32 *)buf;

	dev_dbg(hcd->self.controller,
		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
		hcd, typeReq, wValue, wIndex, buf, wLength);

	wIndex--;

	switch (typeReq) {
	case SetPortFeature:
		if (wValue == USB_PORT_FEAT_POWER) {
			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
			if (valid_port(wIndex)) {
				ohci_at91_usb_set_power(pdata, wIndex, 1);
				ret = 0;
			}

			goto out;
		}
		break;

	case ClearPortFeature:
		switch (wValue) {
		case USB_PORT_FEAT_C_OVER_CURRENT:
			dev_dbg(hcd->self.controller,
				"ClearPortFeature: C_OVER_CURRENT\n");

			if (valid_port(wIndex)) {
				pdata->overcurrent_changed[wIndex] = 0;
				pdata->overcurrent_status[wIndex] = 0;
			}

			goto out;

		case USB_PORT_FEAT_OVER_CURRENT:
			dev_dbg(hcd->self.controller,
				"ClearPortFeature: OVER_CURRENT\n");

			if (valid_port(wIndex))
				pdata->overcurrent_status[wIndex] = 0;

			goto out;

		case USB_PORT_FEAT_POWER:
			dev_dbg(hcd->self.controller,
				"ClearPortFeature: POWER\n");

			if (valid_port(wIndex)) {
				ohci_at91_usb_set_power(pdata, wIndex, 0);
				return 0;
			}
		}
		break;
	}

	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
	if (ret)
		goto out;

	switch (typeReq) {
	case GetHubDescriptor:

		/* update the hub's descriptor */

		desc = (struct usb_hub_descriptor *)buf;

		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
			desc->wHubCharacteristics);

		/* remove the old configurations for power-switching, and
                 * over-current protection, and insert our new configuration
                 */

		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
		desc->wHubCharacteristics |=
			cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);

		if (pdata->overcurrent_supported) {
			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
			desc->wHubCharacteristics |=
				cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
		}

		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
			desc->wHubCharacteristics);

		return ret;

	case GetPortStatus:
		/* check port status */

		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);

		if (valid_port(wIndex)) {
			if (!ohci_at91_usb_get_power(pdata, wIndex))
				*data &= ~cpu_to_le32(RH_PS_PPS);

			if (pdata->overcurrent_changed[wIndex])
				*data |= cpu_to_le32(RH_PS_OCIC);

			if (pdata->overcurrent_status[wIndex])
				*data |= cpu_to_le32(RH_PS_POCI);
		}
	}

 out:
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
thomas petazzoni
thomas petazzoni
437
92.39%
1
20.00%
nicolas ferre
nicolas ferre
30
6.34%
1
20.00%
jingoo han
jingoo han
3
0.63%
1
20.00%
sergei shtylyov
sergei shtylyov
2
0.42%
1
20.00%
laurent pinchart
laurent pinchart
1
0.21%
1
20.00%
Total
473
100.00%
5
100.00%

/*-------------------------------------------------------------------------*/



static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
{
	struct platform_device *pdev = data;
	struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
	int val, gpio, port;

	/* From the GPIO notifying the over-current situation, find
         * out the corresponding port */
	at91_for_each_port(port) {
		if (gpio_is_valid(pdata->overcurrent_pin[port]) &&
				gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
			gpio = pdata->overcurrent_pin[port];
			break;
		}
	}

	if (port == AT91_MAX_USBH_PORTS) {
		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
		return IRQ_HANDLED;
	}

	val = gpio_get_value(gpio);

	/* When notified of an over-current situation, disable power
           on the corresponding port, and mark this port in
           over-current. */
	if (!val) {
		ohci_at91_usb_set_power(pdata, port, 0);
		pdata->overcurrent_status[port]  = 1;
		pdata->overcurrent_changed[port] = 1;
	}

	dev_dbg(& pdev->dev, "overcurrent situation %s\n",
		val ? "exited" : "notified");

	return IRQ_HANDLED;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
thomas petazzoni
thomas petazzoni
131
79.39%
1
16.67%
nicolas ferre
nicolas ferre
18
10.91%
2
33.33%
joachim eastwood
joachim eastwood
10
6.06%
1
16.67%
jingoo han
jingoo han
4
2.42%
1
16.67%
andrew victor
andrew victor
2
1.21%
1
16.67%
Total
165
100.00%
6
100.00%


static const struct of_device_id at91_ohci_dt_ids[] = {
	{ .compatible = "atmel,at91rm9200-ohci" },
	{ /* sentinel */ }
};

MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);

/*-------------------------------------------------------------------------*/



static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
	struct device_node *np = pdev->dev.of_node;
	struct at91_usbh_data	*pdata;
	int			i;
	int			gpio;
	int			ret;
	enum of_gpio_flags	flags;
	u32			ports;

	/* Right now device-tree probed devices don't get dma_mask set.
         * Since shared usb code relies on it, set it here for now.
         * Once we have dma capability bindings this can go away.
         */
	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
	if (ret)
		return ret;

	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;

	pdev->dev.platform_data = pdata;

	if (!of_property_read_u32(np, "num-ports", &ports))
		pdata->ports = ports;

	at91_for_each_port(i) {
		/*
                 * do not configure PIO if not in relation with
                 * real USB port on board
                 */
		if (i >= pdata->ports) {
			pdata->vbus_pin[i] = -EINVAL;
			pdata->overcurrent_pin[i] = -EINVAL;
			continue;
		}

		gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i,
					       &flags);
		pdata->vbus_pin[i] = gpio;
		if (!gpio_is_valid(gpio))
			continue;
		pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;

		ret = gpio_request(gpio, "ohci_vbus");
		if (ret) {
			dev_err(&pdev->dev,
				"can't request vbus gpio %d\n", gpio);
			continue;
		}
		ret = gpio_direction_output(gpio,
					!pdata->vbus_pin_active_low[i]);
		if (ret) {
			dev_err(&pdev->dev,
				"can't put vbus gpio %d as output %d\n",
				gpio, !pdata->vbus_pin_active_low[i]);
			gpio_free(gpio);
			continue;
		}

		ohci_at91_usb_set_power(pdata, i, 1);
	}

	at91_for_each_port(i) {
		if (i >= pdata->ports)
			break;

		pdata->overcurrent_pin[i] =
			of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);

		if (!gpio_is_valid(pdata->overcurrent_pin[i]))
			continue;
		gpio = pdata->overcurrent_pin[i];

		ret = gpio_request(gpio, "ohci_overcurrent");
		if (ret) {
			dev_err(&pdev->dev,
				"can't request overcurrent gpio %d\n",
				gpio);
			continue;
		}

		ret = gpio_direction_input(gpio);
		if (ret) {
			dev_err(&pdev->dev,
				"can't configure overcurrent gpio %d as input\n",
				gpio);
			gpio_free(gpio);
			continue;
		}

		ret = request_irq(gpio_to_irq(gpio),
				  ohci_hcd_at91_overcurrent_irq,
				  IRQF_SHARED, "ohci_overcurrent", pdev);
		if (ret) {
			gpio_free(gpio);
			dev_err(&pdev->dev,
				"can't get gpio IRQ for overcurrent\n");
		}
	}

	device_init_wakeup(&pdev->dev, 1);
	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
nicolas ferre
nicolas ferre
152
33.12%
3
20.00%
jean-christophe plagniol-villard
jean-christophe plagniol-villard
110
23.97%
2
13.33%
alexandre belloni
alexandre belloni
75
16.34%
3
20.00%
thomas petazzoni
thomas petazzoni
60
13.07%
1
6.67%
david brownell
david brownell
33
7.19%
2
13.33%
russell king
russell king
13
2.83%
2
13.33%
andrew victor
andrew victor
9
1.96%
1
6.67%
stephen warren
stephen warren
7
1.53%
1
6.67%
Total
459
100.00%
15
100.00%



static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
	struct at91_usbh_data	*pdata = dev_get_platdata(&pdev->dev);
	int			i;

	if (pdata) {
		at91_for_each_port(i) {
			if (!gpio_is_valid(pdata->vbus_pin[i]))
				continue;
			ohci_at91_usb_set_power(pdata, i, 0);
			gpio_free(pdata->vbus_pin[i]);
		}

		at91_for_each_port(i) {
			if (!gpio_is_valid(pdata->overcurrent_pin[i]))
				continue;
			free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
			gpio_free(pdata->overcurrent_pin[i]);
		}
	}

	device_init_wakeup(&pdev->dev, 0);
	usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
david brownell
david brownell
61
43.57%
2
22.22%
thomas petazzoni
thomas petazzoni
40
28.57%
1
11.11%
andrew victor
andrew victor
18
12.86%
1
11.11%
jean-christophe plagniol-villard
jean-christophe plagniol-villard
8
5.71%
1
11.11%
nicolas ferre
nicolas ferre
4
2.86%
1
11.11%
jingoo han
jingoo han
4
2.86%
1
11.11%
pete zaitcev
pete zaitcev
3
2.14%
1
11.11%
justin waters
justin waters
2
1.43%
1
11.11%
Total
140
100.00%
9
100.00%


static int __maybe_unused

ohci_hcd_at91_drv_suspend(struct device *dev)
{
	struct usb_hcd	*hcd = dev_get_drvdata(dev);
	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
	int		ret;

	/*
         * Disable wakeup if we are going to sleep with slow clock mode
         * enabled.
         */
	ohci_at91->wakeup = device_may_wakeup(dev)
			&& !at91_suspend_entering_slow_clock();

	if (ohci_at91->wakeup)
		enable_irq_wake(hcd->irq);

	ret = ohci_suspend(hcd, ohci_at91->wakeup);
	if (ret) {
		if (ohci_at91->wakeup)
			disable_irq_wake(hcd->irq);
		return ret;
	}
	/*
         * The integrated transceivers seem unable to notice disconnect,
         * reconnect, or wakeup without the 48 MHz clock active.  so for
         * correctness, always discard connection state (using reset).
         *
         * REVISIT: some boards will be able to turn VBUS off...
         */
	if (!ohci_at91->wakeup) {
		ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
		ohci->hc_control &= OHCI_CTRL_RWC;
		ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
		ohci->rh_state = OHCI_RH_HALTED;

		/* flush the writes */
		(void) ohci_readl (ohci, &ohci->regs->control);
		at91_stop_clock(ohci_at91);
	}

	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
sylvain rochet
sylvain rochet
46
25.14%
3
30.00%
david brownell
david brownell
41
22.40%
1
10.00%
manjunath goudar
manjunath goudar
40
21.86%
1
10.00%
majunath goudar
majunath goudar
27
14.75%
1
10.00%
patrice vilchez
patrice vilchez
16
8.74%
1
10.00%
andrew victor
andrew victor
12
6.56%
2
20.00%
arnd bergmann
arnd bergmann
1
0.55%
1
10.00%
Total
183
100.00%
10
100.00%


static int __maybe_unused

ohci_hcd_at91_drv_resume(struct device *dev)
{
	struct usb_hcd	*hcd = dev_get_drvdata(dev);
	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);

	if (ohci_at91->wakeup)
		disable_irq_wake(hcd->irq);

	at91_start_clock(ohci_at91);

	ohci_resume(hcd, false);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
sylvain rochet
sylvain rochet
20
33.33%
3
30.00%
marc pignat
marc pignat
18
30.00%
1
10.00%
andrew victor
andrew victor
13
21.67%
2
20.00%
alan stern
alan stern
4
6.67%
1
10.00%
florian fainelli
florian fainelli
3
5.00%
1
10.00%
david brownell
david brownell
1
1.67%
1
10.00%
arnd bergmann
arnd bergmann
1
1.67%
1
10.00%
Total
60
100.00%
10
100.00%

static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
					ohci_hcd_at91_drv_resume);


static struct platform_driver ohci_hcd_at91_driver = {
	.probe		= ohci_hcd_at91_drv_probe,
	.remove		= ohci_hcd_at91_drv_remove,
	.shutdown	= usb_hcd_platform_shutdown,
	.driver		= {
		.name	= "at91_ohci",
		.pm	= &ohci_hcd_at91_pm_ops,
		.of_match_table	= at91_ohci_dt_ids,
        },
};



static int __init ohci_at91_init(void)
{
	if (usb_disabled())
		return -ENODEV;

	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
	ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);

	/*
         * The Atmel HW has some unusual quirks, which require Atmel-specific
         * workarounds. We override certain hc_driver functions here to
         * achieve that. We explicitly do not enhance ohci_driver_overrides to
         * allow this more easily, since this is an unusual case, and we don't
         * want to encourage others to override these functions by making it
         * too easy.
         */

	ohci_at91_hc_driver.hub_status_data	= ohci_at91_hub_status_data;
	ohci_at91_hc_driver.hub_control		= ohci_at91_hub_control;

	return platform_driver_register(&ohci_hcd_at91_driver);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
manjunath goudar
manjunath goudar
54
96.43%
1
50.00%
sylvain rochet
sylvain rochet
2
3.57%
1
50.00%
Total
56
100.00%
2
100.00%


module_init(ohci_at91_init);



static void __exit ohci_at91_cleanup(void)
{
	platform_driver_unregister(&ohci_hcd_at91_driver);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
manjunath goudar
manjunath goudar
15
100.00%
1
100.00%
Total
15
100.00%
1
100.00%


module_exit(ohci_at91_cleanup);


MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:at91_ohci");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
thomas petazzoni
thomas petazzoni
821
30.36%
1
1.92%
andrew victor
andrew victor
439
16.24%
2
3.85%
jean-christophe plagniol-villard
jean-christophe plagniol-villard
270
9.99%
7
13.46%
nicolas ferre
nicolas ferre
232
8.58%
6
11.54%
sylvain rochet
sylvain rochet
223
8.25%
3
5.77%
manjunath goudar
manjunath goudar
208
7.69%
1
1.92%
david brownell
david brownell
148
5.47%
3
5.77%
alexandre belloni
alexandre belloni
123
4.55%
4
7.69%
boris brezillon
boris brezillon
72
2.66%
6
11.54%
majunath goudar
majunath goudar
27
1.00%
1
1.92%
varka bhadram
varka bhadram
23
0.85%
1
1.92%
marc pignat
marc pignat
18
0.67%
1
1.92%
patrice vilchez
patrice vilchez
16
0.59%
1
1.92%
russell king
russell king
13
0.48%
2
3.85%
jingoo han
jingoo han
11
0.41%
1
1.92%
peter chen
peter chen
10
0.37%
1
1.92%
pete zaitcev
pete zaitcev
10
0.37%
1
1.92%
joachim eastwood
joachim eastwood
10
0.37%
1
1.92%
stephen warren
stephen warren
7
0.26%
1
1.92%
aleksey gorelov
aleksey gorelov
5
0.18%
1
1.92%
arnd bergmann
arnd bergmann
5
0.18%
2
3.85%
alan stern
alan stern
4
0.15%
1
1.92%
florian fainelli
florian fainelli
3
0.11%
1
1.92%
sergei shtylyov
sergei shtylyov
2
0.07%
1
1.92%
laurent pinchart
laurent pinchart
2
0.07%
1
1.92%
justin waters
justin waters
2
0.07%
1
1.92%
Total
2704
100.00%
52
100.00%
  
Directory: drivers/usb/host

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.