Release 4.7 drivers/usb/host/xhci-rcar.c

/*
 * xHCI host controller driver for R-Car SoCs
 *
 * Copyright (C) 2014 Renesas Electronics Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */

#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/usb/phy.h>

#include "xhci.h"
#include "xhci-plat.h"
#include "xhci-rcar.h"

/*
* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes
*   performance degradation. So, this driver continues to use the V1 if R-Car
*   Gen2.
* - The V1 firmware is impossible to use on R-Car Gen3.
*/

MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1);

MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2);

/*** Register Offset ***/

#define RCAR_USB3_INT_ENA	0x224	
/* Interrupt Enable */

#define RCAR_USB3_DL_CTRL	0x250	
/* FW Download Control & Status */

#define RCAR_USB3_FW_DATA0	0x258	
/* FW Data0 */


#define RCAR_USB3_LCLK		0xa44	
/* LCLK Select */

#define RCAR_USB3_CONF1		0xa48	
/* USB3.0 Configuration1 */

#define RCAR_USB3_CONF2		0xa5c	
/* USB3.0 Configuration2 */

#define RCAR_USB3_CONF3		0xaa8	
/* USB3.0 Configuration3 */

#define RCAR_USB3_RX_POL	0xab0	
/* USB3.0 RX Polarity */

#define RCAR_USB3_TX_POL	0xab8	
/* USB3.0 TX Polarity */

/*** Register Settings ***/
/* Interrupt Enable */

#define RCAR_USB3_INT_XHC_ENA	0x00000001

#define RCAR_USB3_INT_PME_ENA	0x00000002

#define RCAR_USB3_INT_HSE_ENA	0x00000004

#define RCAR_USB3_INT_ENA_VAL	(RCAR_USB3_INT_XHC_ENA | \
                                RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA)

/* FW Download Control & Status */

#define RCAR_USB3_DL_CTRL_ENABLE	0x00000001

#define RCAR_USB3_DL_CTRL_FW_SUCCESS	0x00000010

#define RCAR_USB3_DL_CTRL_FW_SET_DATA0	0x00000100

/* LCLK Select */

#define RCAR_USB3_LCLK_ENA_VAL	0x01030001

/* USB3.0 Configuration */

#define RCAR_USB3_CONF1_VAL	0x00030204

#define RCAR_USB3_CONF2_VAL	0x00030300

#define RCAR_USB3_CONF3_VAL	0x13802007

/* USB3.0 Polarity */

#define RCAR_USB3_RX_POL_VAL	BIT(21)

#define RCAR_USB3_TX_POL_VAL	BIT(4)



static void xhci_rcar_start_gen2(struct usb_hcd *hcd)
{
	/* LCLK Select */
	writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
	/* USB3.0 Configuration */
	writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
	writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
	writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
	/* USB3.0 Polarity */
	writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
	writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
yoshihiro shimoda
yoshihiro shimoda
80
100.00%
2
100.00%
Total
80
100.00%
2
100.00%



static int xhci_rcar_is_gen2(struct device *dev)
{
	struct device_node *node = dev->of_node;

	return of_device_is_compatible(node, "renesas,xhci-r8a7790") ||
		of_device_is_compatible(node, "renesas,xhci-r8a7791") ||
		of_device_is_compatible(node, "renesas,xhci-r8a7793") ||
		of_device_is_compatible(node, "renensas,rcar-gen2-xhci");
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
49
100.00%
1
100.00%
Total
49
100.00%
1
100.00%



static int xhci_rcar_is_gen3(struct device *dev)
{
	struct device_node *node = dev->of_node;

	return of_device_is_compatible(node, "renesas,xhci-r8a7795") ||
		of_device_is_compatible(node, "renesas,rcar-gen3-xhci");
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
35
100.00%
1
100.00%
Total
35
100.00%
1
100.00%



void xhci_rcar_start(struct usb_hcd *hcd)
{
	u32 temp;

	if (hcd->regs != NULL) {
		/* Interrupt Enable */
		temp = readl(hcd->regs + RCAR_USB3_INT_ENA);
		temp |= RCAR_USB3_INT_ENA_VAL;
		writel(temp, hcd->regs + RCAR_USB3_INT_ENA);
		if (xhci_rcar_is_gen2(hcd->self.controller))
			xhci_rcar_start_gen2(hcd);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
yoshihiro shimoda
yoshihiro shimoda
61
92.42%
2
66.67%
felipe balbi
felipe balbi
5
7.58%
1
33.33%
Total
66
100.00%
3
100.00%



static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
{
	struct device *dev = hcd->self.controller;
	void __iomem *regs = hcd->regs;
	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
	const struct firmware *fw;
	int retval, index, j, time;
	int timeout = 10000;
	u32 data, val, temp;

	/* request R-Car USB3.0 firmware */
	retval = request_firmware(&fw, priv->firmware_name, dev);
	if (retval)
		return retval;

	/* download R-Car USB3.0 firmware */
	temp = readl(regs + RCAR_USB3_DL_CTRL);
	temp |= RCAR_USB3_DL_CTRL_ENABLE;
	writel(temp, regs + RCAR_USB3_DL_CTRL);

	for (index = 0; index < fw->size; index += 4) {
		/* to avoid reading beyond the end of the buffer */
		for (data = 0, j = 3; j >= 0; j--) {
			if ((j + index) < fw->size)
				data |= fw->data[index + j] << (8 * j);
		}
		writel(data, regs + RCAR_USB3_FW_DATA0);
		temp = readl(regs + RCAR_USB3_DL_CTRL);
		temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
		writel(temp, regs + RCAR_USB3_DL_CTRL);

		for (time = 0; time < timeout; time++) {
			val = readl(regs + RCAR_USB3_DL_CTRL);
			if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
				break;
			udelay(1);
		}
		if (time == timeout) {
			retval = -ETIMEDOUT;
			break;
		}
	}

	temp = readl(regs + RCAR_USB3_DL_CTRL);
	temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
	writel(temp, regs + RCAR_USB3_DL_CTRL);

	for (time = 0; time < timeout; time++) {
		val = readl(regs + RCAR_USB3_DL_CTRL);
		if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
			retval = 0;
			break;
		}
		udelay(1);
	}
	if (time == timeout)
		retval = -ETIMEDOUT;

	release_firmware(fw);

	return retval;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
yoshihiro shimoda
yoshihiro shimoda
349
100.00%
2
100.00%
Total
349
100.00%
2
100.00%

/* This function needs to initialize a "phy" of usb before */


int xhci_rcar_init_quirk(struct usb_hcd *hcd)
{
	struct xhci_hcd *xhci = hcd_to_xhci(hcd);

	/* If hcd->regs is NULL, we don't just call the following function */
	if (!hcd->regs)
		return 0;

	/*
         * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
         * to 1. However, these SoCs don't support 64-bit address memory
         * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
         * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
         * xhci_gen_setup().
         */
	if (xhci_rcar_is_gen2(hcd->self.controller) ||
			xhci_rcar_is_gen3(hcd->self.controller))
		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;

	return xhci_rcar_download_firmware(hcd);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
37
57.81%
1
50.00%
yoshihiro shimoda
yoshihiro shimoda
27
42.19%
1
50.00%
Total
64
100.00%
2
100.00%

Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
yoshihiro shimoda
yoshihiro shimoda
655
83.55%
3
75.00%
felipe balbi
felipe balbi
129
16.45%
1
25.00%
Total
784
100.00%
4
100.00%
  
Directory: drivers/usb/host

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.