Release 4.7 drivers/usb/misc/ezusb.c
/*
* EZ-USB specific functions used by some of the USB to Serial drivers.
*
* Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
#include <linux/usb/ezusb.h>
struct ezusb_fx_type {
/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
unsigned short cpucs_reg;
unsigned short max_internal_adress;
};
static struct ezusb_fx_type ezusb_fx1 = {
.cpucs_reg = 0x7F92,
.max_internal_adress = 0x1B3F,
};
/* Commands for writing to memory */
#define WRITE_INT_RAM 0xA0
#define WRITE_EXT_RAM 0xA3
static int ezusb_writememory(struct usb_device *dev, int address,
unsigned char *data, int length, __u8 request)
{
int result;
unsigned char *transfer_buffer;
if (!dev)
return -ENODEV;
transfer_buffer = kmemdup(data, length, GFP_KERNEL);
if (!transfer_buffer) {
dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n",
__func__, length);
return -ENOMEM;
}
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
address, 0, transfer_buffer, length, 3000);
kfree(transfer_buffer);
return result;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| greg kroah-hartman | greg kroah-hartman | 104 | 88.14% | 4 | 44.44% |
| rene buergel | rene buergel | 7 | 5.93% | 1 | 11.11% |
| eric sesterhenn | eric sesterhenn | 3 | 2.54% | 1 | 11.11% |
| alan cox | alan cox | 2 | 1.69% | 1 | 11.11% |
| nishanth aravamudan | nishanth aravamudan | 1 | 0.85% | 1 | 11.11% |
| harvey harrison | harvey harrison | 1 | 0.85% | 1 | 11.11% |
| Total | 118 | 100.00% | 9 | 100.00% |
static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
unsigned char reset_bit)
{
int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM);
if (response < 0)
dev_err(&dev->dev, "%s-%d failed: %d\n",
__func__, reset_bit, response);
return response;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| greg kroah-hartman | greg kroah-hartman | 46 | 75.41% | 4 | 57.14% |
| rene buergel | rene buergel | 14 | 22.95% | 2 | 28.57% |
| harvey harrison | harvey harrison | 1 | 1.64% | 1 | 14.29% |
| Total | 61 | 100.00% | 7 | 100.00% |
int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit)
{
return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| rene buergel | rene buergel | 26 | 100.00% | 1 | 100.00% |
| Total | 26 | 100.00% | 1 | 100.00% |
EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset);
static int ezusb_ihex_firmware_download(struct usb_device *dev,
struct ezusb_fx_type fx,
const char *firmware_path)
{
int ret = -ENOENT;
const struct firmware *firmware = NULL;
const struct ihex_binrec *record;
if (request_ihex_firmware(&firmware, firmware_path,
&dev->dev)) {
dev_err(&dev->dev,
"%s - request \"%s\" failed\n",
__func__, firmware_path);
goto out;
}
ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
if (ret < 0)
goto out;
record = (const struct ihex_binrec *)firmware->data;
for (; record; record = ihex_next_binrec(record)) {
if (be32_to_cpu(record->addr) > fx.max_internal_adress) {
ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
(unsigned char *)record->data,
be16_to_cpu(record->len), WRITE_EXT_RAM);
if (ret < 0) {
dev_err(&dev->dev, "%s - ezusb_writememory "
"failed writing internal memory "
"(%d %04X %p %d)\n", __func__, ret,
be32_to_cpu(record->addr), record->data,
be16_to_cpu(record->len));
goto out;
}
}
}
ret = ezusb_set_reset(dev, fx.cpucs_reg, 1);
if (ret < 0)
goto out;
record = (const struct ihex_binrec *)firmware->data;
for (; record; record = ihex_next_binrec(record)) {
if (be32_to_cpu(record->addr) <= fx.max_internal_adress) {
ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
(unsigned char *)record->data,
be16_to_cpu(record->len), WRITE_INT_RAM);
if (ret < 0) {
dev_err(&dev->dev, "%s - ezusb_writememory "
"failed writing external memory "
"(%d %04X %p %d)\n", __func__, ret,
be32_to_cpu(record->addr), record->data,
be16_to_cpu(record->len));
goto out;
}
}
}
ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
out:
release_firmware(firmware);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| rene buergel | rene buergel | 377 | 100.00% | 1 | 100.00% |
| Total | 377 | 100.00% | 1 | 100.00% |
int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
const char *firmware_path)
{
return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| rene buergel | rene buergel | 25 | 100.00% | 1 | 100.00% |
| Total | 25 | 100.00% | 1 | 100.00% |
EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
#if 0
/*
* Once someone one needs these fx2 functions, uncomment them
* and add them to ezusb.h and all should be good.
*/
static struct ezusb_fx_type ezusb_fx2 = {
.cpucs_reg = 0xE600,
.max_internal_adress = 0x3FFF,
};
int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
{
return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
}
EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
const char *firmware_path)
{
return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
}
EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
#endif
MODULE_LICENSE("GPL");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| rene buergel | rene buergel | 501 | 72.50% | 3 | 23.08% |
| greg kroah-hartman | greg kroah-hartman | 176 | 25.47% | 4 | 30.77% |
| dave jones | dave jones | 5 | 0.72% | 1 | 7.69% |
| eric sesterhenn | eric sesterhenn | 3 | 0.43% | 1 | 7.69% |
| harvey harrison | harvey harrison | 2 | 0.29% | 1 | 7.69% |
| alan cox | alan cox | 2 | 0.29% | 1 | 7.69% |
| nishanth aravamudan | nishanth aravamudan | 1 | 0.14% | 1 | 7.69% |
| paul chavent | paul chavent | 1 | 0.14% | 1 | 7.69% |
| Total | 691 | 100.00% | 13 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.