Release 4.7 drivers/usb/renesas_usbhs/mod_host.c
  
  
/*
 * Renesas USB driver
 *
 * Copyright (C) 2011 Renesas Solutions Corp.
 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "common.h"
/*
 *** HARDWARE LIMITATION ***
 *
 * 1) renesas_usbhs has a limited number of controllable devices.
 *    it can control only 9 devices in generally.
 *      see DEVADDn / DCPMAXP / PIPEMAXP.
 *
 * 2) renesas_usbhs pipe number is limited.
 *    the pipe will be re-used for each devices.
 *    so, software should control DATA0/1 sequence of each devices.
 */
/*
 *              image of mod_host
 *
 * +--------+
 * | udev 0 | --> it is used when set address
 * +--------+
 *
 * +--------+                                   pipes are reused for each uep.
 * | udev 1 |-+- [uep 0 (dcp) ] --+             pipe will be switched when
 * +--------+ |                   |             other device requested
 *            +- [uep 1 (bulk)] --|---+            +--------------+
 *            |                   +--------------> | pipe0 (dcp)  |
 *            +- [uep 2 (bulk)] -@    |            +--------------+
 *                                    |            | pipe1 (isoc) |
 * +--------+                         |            +--------------+
 * | udev 2 |-+- [uep 0 (dcp) ] -@    +----------> | pipe2 (bulk) |
 * +--------+ |                                    +--------------+
 *            +- [uep 1 (int) ] ----+     +------> | pipe3 (bulk) |
 *                                  |     |        +--------------+
 * +--------+                       +-----|------> | pipe4 (int)  |
 * | udev 3 |-+- [uep 0 (dcp) ] -@        |        +--------------+
 * +--------+ |                           |        | ....         |
 *            +- [uep 1 (bulk)] -@        |        | ....         |
 *            |                           |
 *            +- [uep 2 (bulk)]-----------+
 *
 * @ :  uep requested free pipe, but all have been used.
 *      now it is waiting for free pipe
 */
/*
 *              struct
 */
struct usbhsh_request {
	
struct urb		*urb;
	
struct usbhs_pkt	pkt;
};
struct usbhsh_device {
	
struct usb_device	*usbv;
	
struct list_head	ep_list_head; /* list of usbhsh_ep */
};
struct usbhsh_ep {
	
struct usbhs_pipe	*pipe;   /* attached pipe */
	
struct usbhsh_device	*udev;   /* attached udev */
	
struct usb_host_endpoint *ep;
	
struct list_head	ep_list; /* list to usbhsh_device */
	
unsigned int		counter; /* pipe attach counter */
};
#define USBHSH_DEVICE_MAX	10 
/* see DEVADDn / DCPMAXP / PIPEMAXP */
#define USBHSH_PORT_MAX		 7 
/* see DEVADDn :: HUBPORT */
struct usbhsh_hpriv {
	
struct usbhs_mod	mod;
	
struct usbhs_pipe	*dcp;
	
struct usbhsh_device	udev[USBHSH_DEVICE_MAX];
	
u32	port_stat;	/* USB_PORT_STAT_xxx */
	
struct completion	setup_ack_done;
};
static const char usbhsh_hcd_name[] = "renesas_usbhs host";
/*
 *              macro
 */
#define usbhsh_priv_to_hpriv(priv) \
	container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)
#define __usbhsh_for_each_udev(start, pos, h, i)	\
	for ((i) = start;                                               \
             ((i) < USBHSH_DEVICE_MAX) && ((pos) = (h)->udev + (i));    \
             (i)++)
#define usbhsh_for_each_udev(pos, hpriv, i)	\
	__usbhsh_for_each_udev(1, pos, hpriv, i)
#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i)	\
	__usbhsh_for_each_udev(0, pos, hpriv, i)
#define usbhsh_hcd_to_hpriv(h)	(struct usbhsh_hpriv *)((h)->hcd_priv)
#define usbhsh_hcd_to_dev(h)	((h)->self.controller)
#define usbhsh_hpriv_to_priv(h)	((h)->mod.priv)
#define usbhsh_hpriv_to_dcp(h)	((h)->dcp)
#define usbhsh_hpriv_to_hcd(h)	\
	container_of((void *)h, struct usb_hcd, hcd_priv)
#define usbhsh_ep_to_uep(u)	((u)->hcpriv)
#define usbhsh_uep_to_pipe(u)	((u)->pipe)
#define usbhsh_uep_to_udev(u)	((u)->udev)
#define usbhsh_uep_to_ep(u)	((u)->ep)
#define usbhsh_urb_to_ureq(u)	((u)->hcpriv)
#define usbhsh_urb_to_usbv(u)	((u)->dev)
#define usbhsh_usbv_to_udev(d)	dev_get_drvdata(&(d)->dev)
#define usbhsh_udev_to_usbv(h)	((h)->usbv)
#define usbhsh_udev_is_used(h)	usbhsh_udev_to_usbv(h)
#define usbhsh_pipe_to_uep(p)	((p)->mod_private)
#define usbhsh_device_parent(d)		(usbhsh_usbv_to_udev((d)->usbv->parent))
#define usbhsh_device_hubport(d)	((d)->usbv->portnum)
#define usbhsh_device_number(h, d)	((int)((d) - (h)->udev))
#define usbhsh_device_nth(h, d)		((h)->udev + d)
#define usbhsh_device0(h)		usbhsh_device_nth(h, 0)
#define usbhsh_port_stat_init(h)	((h)->port_stat = 0)
#define usbhsh_port_stat_set(h, s)	((h)->port_stat |= (s))
#define usbhsh_port_stat_clear(h, s)	((h)->port_stat &= ~(s))
#define usbhsh_port_stat_get(h)		((h)->port_stat)
#define usbhsh_pkt_to_ureq(p)	\
	container_of((void *)p, struct usbhsh_request, pkt)
/*
 *              req alloc/free
 */
static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv,
					       struct urb *urb,
					       gfp_t mem_flags)
{
	struct usbhsh_request *ureq;
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhs_priv_to_dev(priv);
	ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
	if (!ureq) {
		dev_err(dev, "ureq alloc fail\n");
		return NULL;
	}
	usbhs_pkt_init(&ureq->pkt);
	ureq->urb = urb;
	usbhsh_urb_to_ureq(urb) = ureq;
	return ureq;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 100 | 100.00% | 3 | 100.00% | 
 | Total | 100 | 100.00% | 3 | 100.00% | 
static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv,
			    struct usbhsh_request *ureq)
{
	usbhsh_urb_to_ureq(ureq->urb) = NULL;
	ureq->urb = NULL;
	kfree(ureq);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 36 | 100.00% | 4 | 100.00% | 
 | Total | 36 | 100.00% | 4 | 100.00% | 
/*
 *              status
 */
static int usbhsh_is_running(struct usbhsh_hpriv *hpriv)
{
	/*
         * we can decide some device is attached or not
         * by checking mod.irq_attch
         * see
         *      usbhsh_irq_attch()
         *      usbhsh_irq_dtch()
         */
	return (hpriv->mod.irq_attch == NULL);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 23 | 100.00% | 2 | 100.00% | 
 | Total | 23 | 100.00% | 2 | 100.00% | 
/*
 *              pipe control
 */
static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv,
					  struct urb *urb,
					  struct usbhs_pkt *pkt)
{
	int len = urb->actual_length;
	int maxp = usb_endpoint_maxp(&urb->ep->desc);
	int t = 0;
	/* DCP is out of sequence control */
	if (usb_pipecontrol(urb->pipe))
		return;
	/*
         * renesas_usbhs pipe has a limitation in a number.
         * So, driver should re-use the limited pipe for each device/endpoint.
         * DATA0/1 sequence should be saved for it.
         * see [image of mod_host]
         *     [HARDWARE LIMITATION]
         */
	/*
         * next sequence depends on actual_length
         *
         * ex) actual_length = 1147, maxp = 512
         * data0 : 512
         * data1 : 512
         * data0 : 123
         * data1 is the next sequence
         */
	t = len / maxp;
	if (len % maxp)
		t++;
	if (pkt->zero)
		t++;
	t %= 2;
	if (t)
		usb_dotoggle(urb->dev,
			     usb_pipeendpoint(urb->pipe),
			     usb_pipeout(urb->pipe));
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 112 | 100.00% | 2 | 100.00% | 
 | Total | 112 | 100.00% | 2 | 100.00% | 
static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
					       struct urb *urb);
static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
			      struct urb *urb)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
	struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
	struct usbhs_pipe *pipe;
	struct usb_endpoint_descriptor *desc = &urb->ep->desc;
	struct device *dev = usbhs_priv_to_dev(priv);
	unsigned long flags;
	int dir_in_req = !!usb_pipein(urb->pipe);
	int is_dcp = usb_endpoint_xfer_control(desc);
	int i, dir_in;
	int ret = -EBUSY;
	/********************  spin lock ********************/
	usbhs_lock(priv, flags);
	/*
         * if uep has been attached to pipe,
         * reuse it
         */
	if (usbhsh_uep_to_pipe(uep)) {
		ret = 0;
		goto usbhsh_pipe_attach_done;
	}
	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
		/* check pipe type */
		if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc)))
			continue;
		/* check pipe direction if normal pipe */
		if (!is_dcp) {
			dir_in = !!usbhs_pipe_is_dir_in(pipe);
			if (0 != (dir_in - dir_in_req))
				continue;
		}
		/* check pipe is free */
		if (usbhsh_pipe_to_uep(pipe))
			continue;
		/*
                 * attach pipe to uep
                 *
                 * usbhs_pipe_config_update() should be called after
                 * usbhs_set_device_config()
                 * see
                 *  DCPMAXP/PIPEMAXP
                 */
		usbhsh_uep_to_pipe(uep)		= pipe;
		usbhsh_pipe_to_uep(pipe)	= uep;
		usbhs_pipe_config_update(pipe,
					 usbhsh_device_number(hpriv, udev),
					 usb_endpoint_num(desc),
					 usb_endpoint_maxp(desc));
		dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__,
			usbhsh_device_number(hpriv, udev),
			usb_endpoint_num(desc),
			usbhs_pipe_name(pipe),
			dir_in_req ? "in" : "out");
		ret = 0;
		break;
	}
usbhsh_pipe_attach_done:
	if (0 == ret)
		uep->counter++;
	usbhs_unlock(priv, flags);
	/********************  spin unlock ******************/
	return ret;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 297 | 100.00% | 7 | 100.00% | 
 | Total | 297 | 100.00% | 7 | 100.00% | 
static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
			       struct usbhsh_ep *uep)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct usbhs_pipe *pipe;
	struct device *dev = usbhs_priv_to_dev(priv);
	unsigned long flags;
	if (unlikely(!uep)) {
		dev_err(dev, "no uep\n");
		return;
	}
	/********************  spin lock ********************/
	usbhs_lock(priv, flags);
	pipe = usbhsh_uep_to_pipe(uep);
	if (unlikely(!pipe)) {
		dev_err(dev, "uep doens't have pipe\n");
	} else if (1 == uep->counter--) { /* last user */
		struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
		struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
		/* detach pipe from uep */
		usbhsh_uep_to_pipe(uep)		= NULL;
		usbhsh_pipe_to_uep(pipe)	= NULL;
		dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__,
			usbhsh_device_number(hpriv, udev),
			usb_endpoint_num(&ep->desc),
			usbhs_pipe_name(pipe));
	}
	usbhs_unlock(priv, flags);
	/********************  spin unlock ******************/
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 180 | 100.00% | 4 | 100.00% | 
 | Total | 180 | 100.00% | 4 | 100.00% | 
/*
 *              endpoint control
 */
static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
				  struct urb *urb,
				  gfp_t mem_flags)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
	struct usb_host_endpoint *ep = urb->ep;
	struct usbhsh_ep *uep;
	struct device *dev = usbhs_priv_to_dev(priv);
	struct usb_endpoint_descriptor *desc = &ep->desc;
	unsigned long flags;
	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
	if (!uep) {
		dev_err(dev, "usbhsh_ep alloc fail\n");
		return -ENOMEM;
	}
	/********************  spin lock ********************/
	usbhs_lock(priv, flags);
	/*
         * init endpoint
         */
	uep->counter = 0;
	INIT_LIST_HEAD(&uep->ep_list);
	list_add_tail(&uep->ep_list, &udev->ep_list_head);
	usbhsh_uep_to_udev(uep)	= udev;
	usbhsh_uep_to_ep(uep)	= ep;
	usbhsh_ep_to_uep(ep)	= uep;
	usbhs_unlock(priv, flags);
	/********************  spin unlock ******************/
	dev_dbg(dev, "%s [%d-%d]\n", __func__,
		usbhsh_device_number(hpriv, udev),
		usb_endpoint_num(desc));
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 199 | 100.00% | 7 | 100.00% | 
 | Total | 199 | 100.00% | 7 | 100.00% | 
static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv,
				   struct usb_host_endpoint *ep)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhs_priv_to_dev(priv);
	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
	unsigned long flags;
	if (!uep)
		return;
	dev_dbg(dev, "%s [%d-%d]\n", __func__,
		usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
		usb_endpoint_num(&ep->desc));
	if (usbhsh_uep_to_pipe(uep))
		usbhsh_pipe_detach(hpriv, uep);
	/********************  spin lock ********************/
	usbhs_lock(priv, flags);
	/* remove this endpoint from udev */
	list_del_init(&uep->ep_list);
	usbhsh_uep_to_udev(uep)	= NULL;
	usbhsh_uep_to_ep(uep)	= NULL;
	usbhsh_ep_to_uep(ep)	= NULL;
	usbhs_unlock(priv, flags);
	/********************  spin unlock ******************/
	kfree(uep);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 148 | 100.00% | 4 | 100.00% | 
 | Total | 148 | 100.00% | 4 | 100.00% | 
static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv,
				       struct usbhsh_device *udev)
{
	struct usbhsh_ep *uep, *next;
	list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list)
		usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep));
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 44 | 100.00% | 2 | 100.00% | 
 | Total | 44 | 100.00% | 2 | 100.00% | 
/*
 *              device control
 */
static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd,
				     struct usbhsh_device *udev)
{
	struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
	return hcd->self.root_hub == usbv->parent;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 37 | 100.00% | 2 | 100.00% | 
 | Total | 37 | 100.00% | 2 | 100.00% | 
static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
{
	return !list_empty(&udev->ep_list_head);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 21 | 100.00% | 3 | 100.00% | 
 | Total | 21 | 100.00% | 3 | 100.00% | 
static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
					       struct urb *urb)
{
	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
	struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);
	/* usbhsh_device_attach() is still not called */
	if (!udev)
		return NULL;
	/* if it is device0, return it */
	if (0 == usb_pipedevice(urb->pipe))
		return usbhsh_device0(hpriv);
	/* return attached device */
	return udev;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 69 | 100.00% | 4 | 100.00% | 
 | Total | 69 | 100.00% | 4 | 100.00% | 
static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv,
						 struct urb *urb)
{
	struct usbhsh_device *udev = NULL;
	struct usbhsh_device *udev0 = usbhsh_device0(hpriv);
	struct usbhsh_device *pos;
	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
	struct device *dev = usbhsh_hcd_to_dev(hcd);
	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	unsigned long flags;
	u16 upphub, hubport;
	int i;
	/*
         * This function should be called only while urb is pointing to device0.
         * It will attach unused usbhsh_device to urb (usbv),
         * and initialize device0.
         * You can use usbhsh_device_get() to get "current" udev,
         * and usbhsh_usbv_to_udev() is for "attached" udev.
         */
	if (0 != usb_pipedevice(urb->pipe)) {
		dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__);
		return NULL;
	}
	/********************  spin lock ********************/
	usbhs_lock(priv, flags);
	/*
         * find unused device
         */
	usbhsh_for_each_udev(pos, hpriv, i) {
		if (usbhsh_udev_is_used(pos))
			continue;
		udev = pos;
		break;
	}
	if (udev) {
		/*
                 * usbhsh_usbv_to_udev()
                 * usbhsh_udev_to_usbv()
                 * will be enable
                 */
		dev_set_drvdata(&usbv->dev, udev);
		udev->usbv = usbv;
	}
	usbhs_unlock(priv, flags);
	/********************  spin unlock ******************/
	if (!udev) {
		dev_err(dev, "no free usbhsh_device\n");
		return NULL;
	}
	if (usbhsh_device_has_endpoint(udev)) {
		dev_warn(dev, "udev have old endpoint\n");
		usbhsh_endpoint_detach_all(hpriv, udev);
	}
	if (usbhsh_device_has_endpoint(udev0)) {
		dev_warn(dev, "udev0 have old endpoint\n");
		usbhsh_endpoint_detach_all(hpriv, udev0);
	}
	/* uep will be attached */
	INIT_LIST_HEAD(&udev0->ep_list_head);
	INIT_LIST_HEAD(&udev->ep_list_head);
	/*
         * set device0 config
         */
	usbhs_set_device_config(priv,
				0, 0, 0, usbv->speed);
	/*
         * set new device config
         */
	upphub	= 0;
	hubport	= 0;
	if (!usbhsh_connected_to_rhdev(hcd, udev)) {
		/* if udev is not connected to rhdev, it means parent is Hub */
		struct usbhsh_device *parent = usbhsh_device_parent(udev);
		upphub	= usbhsh_device_number(hpriv, parent);
		hubport	= usbhsh_device_hubport(udev);
		dev_dbg(dev, "%s connecte to Hub [%d:%d](%p)\n", __func__,
			upphub, hubport, parent);
	}
	usbhs_set_device_config(priv,
			       usbhsh_device_number(hpriv, udev),
			       upphub, hubport, usbv->speed);
	dev_dbg(dev, "%s [%d](%p)\n", __func__,
		usbhsh_device_number(hpriv, udev), udev);
	return udev;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 381 | 100.00% | 8 | 100.00% | 
 | Total | 381 | 100.00% | 8 | 100.00% | 
static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv,
			       struct usbhsh_device *udev)
{
	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhsh_hcd_to_dev(hcd);
	struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
	unsigned long flags;
	dev_dbg(dev, "%s [%d](%p)\n", __func__,
		usbhsh_device_number(hpriv, udev), udev);
	if (usbhsh_device_has_endpoint(udev)) {
		dev_warn(dev, "udev still have endpoint\n");
		usbhsh_endpoint_detach_all(hpriv, udev);
	}
	/*
         * There is nothing to do if it is device0.
         * see
         *  usbhsh_device_attach()
         *  usbhsh_device_get()
         */
	if (0 == usbhsh_device_number(hpriv, udev))
		return;
	/********************  spin lock ********************/
	usbhs_lock(priv, flags);
	/*
         * usbhsh_usbv_to_udev()
         * usbhsh_udev_to_usbv()
         * will be disable
         */
	dev_set_drvdata(&usbv->dev, NULL);
	udev->usbv = NULL;
	usbhs_unlock(priv, flags);
	/********************  spin unlock ******************/
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 147 | 100.00% | 4 | 100.00% | 
 | Total | 147 | 100.00% | 4 | 100.00% | 
/*
 *              queue push/pop
 */
static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
{
	struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
	struct urb *urb = ureq->urb;
	struct device *dev = usbhs_priv_to_dev(priv);
	int status = 0;
	dev_dbg(dev, "%s\n", __func__);
	if (!urb) {
		dev_warn(dev, "pkt doesn't have urb\n");
		return;
	}
	if (!usbhsh_is_running(hpriv))
		status = -ESHUTDOWN;
	urb->actual_length = pkt->actual;
	usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
	usbhsh_ureq_free(hpriv, ureq);
	usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
	usb_hcd_unlink_urb_from_ep(hcd, urb);
	usb_hcd_giveback_urb(hcd, urb, status);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 159 | 100.00% | 6 | 100.00% | 
 | Total | 159 | 100.00% | 6 | 100.00% | 
static int usbhsh_queue_push(struct usb_hcd *hcd,
			     struct urb *urb,
			     gfp_t mem_flags)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
	struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
	struct device *dev = usbhsh_hcd_to_dev(hcd);
	struct usbhsh_request *ureq;
	void *buf;
	int len, sequence;
	if (usb_pipeisoc(urb->pipe)) {
		dev_err(dev, "pipe iso is not supported now\n");
		return -EIO;
	}
	/* this ureq will be freed on usbhsh_queue_done() */
	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
	if (unlikely(!ureq)) {
		dev_err(dev, "ureq alloc fail\n");
		return -ENOMEM;
	}
	if (usb_pipein(urb->pipe))
		pipe->handler = &usbhs_fifo_dma_pop_handler;
	else
		pipe->handler = &usbhs_fifo_dma_push_handler;
	buf = (void *)(urb->transfer_buffer + urb->actual_length);
	len = urb->transfer_buffer_length - urb->actual_length;
	sequence = usb_gettoggle(urb->dev,
				 usb_pipeendpoint(urb->pipe),
				 usb_pipeout(urb->pipe));
	dev_dbg(dev, "%s\n", __func__);
	usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done,
		       buf, len, (urb->transfer_flags & URB_ZERO_PACKET),
		       sequence);
	usbhs_pkt_start(pipe);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 246 | 100.00% | 5 | 100.00% | 
 | Total | 246 | 100.00% | 5 | 100.00% | 
static void usbhsh_queue_force_pop(struct usbhs_priv *priv,
				   struct usbhs_pipe *pipe)
{
	struct usbhs_pkt *pkt;
	while (1) {
		pkt = usbhs_pkt_pop(pipe, NULL);
		if (!pkt)
			break;
		/*
                 * if all packet are gone, usbhsh_endpoint_disable()
                 * will be called.
                 * then, attached device/endpoint/pipe will be detached
                 */
		usbhsh_queue_done(priv, pkt);
	}
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 50 | 100.00% | 1 | 100.00% | 
 | Total | 50 | 100.00% | 1 | 100.00% | 
static void usbhsh_queue_force_pop_all(struct usbhs_priv *priv)
{
	struct usbhs_pipe *pos;
	int i;
	usbhs_for_each_pipe_with_dcp(pos, priv, i)
		usbhsh_queue_force_pop(priv, pos);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 34 | 100.00% | 1 | 100.00% | 
 | Total | 34 | 100.00% | 1 | 100.00% | 
/*
 *              DCP setup stage
 */
static int usbhsh_is_request_address(struct urb *urb)
{
	struct usb_ctrlrequest *req;
	req = (struct usb_ctrlrequest *)urb->setup_packet;
	if ((DeviceOutRequest    == req->bRequestType << 8) &&
	    (USB_REQ_SET_ADDRESS == req->bRequest))
		return 1;
	else
		return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 54 | 100.00% | 2 | 100.00% | 
 | Total | 54 | 100.00% | 2 | 100.00% | 
static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
					   struct urb *urb,
					   struct usbhs_pipe *pipe)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct usb_ctrlrequest req;
	struct device *dev = usbhs_priv_to_dev(priv);
	/*
         * wait setup packet ACK
         * see
         *      usbhsh_irq_setup_ack()
         *      usbhsh_irq_setup_err()
         */
	init_completion(&hpriv->setup_ack_done);
	/* copy original request */
	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
	/*
         * renesas_usbhs can not use original usb address.
         * see HARDWARE LIMITATION.
         * modify usb address here to use attached device.
         * see usbhsh_device_attach()
         */
	if (usbhsh_is_request_address(urb)) {
		struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
		struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);
		/* udev is a attached device */
		req.wValue = usbhsh_device_number(hpriv, udev);
		dev_dbg(dev, "create new address - %d\n", req.wValue);
	}
	/* set request */
	usbhs_usbreq_set_val(priv, &req);
	/*
         * wait setup packet ACK
         */
	wait_for_completion(&hpriv->setup_ack_done);
	dev_dbg(dev, "%s done\n", __func__);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 151 | 100.00% | 3 | 100.00% | 
 | Total | 151 | 100.00% | 3 | 100.00% | 
/*
 *              DCP data stage
 */
static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
					  struct usbhs_pkt *pkt)
{
	struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	/* this ureq was connected to urb when usbhsh_urb_enqueue()  */
	usbhsh_ureq_free(hpriv, ureq);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 44 | 100.00% | 2 | 100.00% | 
 | Total | 44 | 100.00% | 2 | 100.00% | 
static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
					 struct urb *urb,
					 struct usbhs_pipe *pipe,
					 gfp_t mem_flags)
{
	struct usbhsh_request *ureq;
	/* this ureq will be freed on usbhsh_data_stage_packet_done() */
	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
	if (unlikely(!ureq))
		return -ENOMEM;
	if (usb_pipein(urb->pipe))
		pipe->handler = &usbhs_dcp_data_stage_in_handler;
	else
		pipe->handler = &usbhs_dcp_data_stage_out_handler;
	usbhs_pkt_push(pipe, &ureq->pkt,
		       usbhsh_data_stage_packet_done,
		       urb->transfer_buffer,
		       urb->transfer_buffer_length,
		       (urb->transfer_flags & URB_ZERO_PACKET),
		       -1);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 111 | 100.00% | 3 | 100.00% | 
 | Total | 111 | 100.00% | 3 | 100.00% | 
/*
 *              DCP status stage
 */
static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
					    struct urb *urb,
					    struct usbhs_pipe *pipe,
					    gfp_t mem_flags)
{
	struct usbhsh_request *ureq;
	/* This ureq will be freed on usbhsh_queue_done() */
	ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
	if (unlikely(!ureq))
		return -ENOMEM;
	if (usb_pipein(urb->pipe))
		pipe->handler = &usbhs_dcp_status_stage_in_handler;
	else
		pipe->handler = &usbhs_dcp_status_stage_out_handler;
	usbhs_pkt_push(pipe, &ureq->pkt,
		       usbhsh_queue_done,
		       NULL,
		       urb->transfer_buffer_length,
		       0, -1);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 103 | 100.00% | 4 | 100.00% | 
 | Total | 103 | 100.00% | 4 | 100.00% | 
static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
				 struct urb *urb,
				 gfp_t mflags)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
	struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
	struct device *dev = usbhsh_hcd_to_dev(hcd);
	int ret;
	dev_dbg(dev, "%s\n", __func__);
	/*
         * setup stage
         *
         * usbhsh_send_setup_stage_packet() wait SACK/SIGN
         */
	usbhsh_setup_stage_packet_push(hpriv, urb, pipe);
	/*
         * data stage
         *
         * It is pushed only when urb has buffer.
         */
	if (urb->transfer_buffer_length) {
		ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags);
		if (ret < 0) {
			dev_err(dev, "data stage failed\n");
			return ret;
		}
	}
	/*
         * status stage
         */
	ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags);
	if (ret < 0) {
		dev_err(dev, "status stage failed\n");
		return ret;
	}
	/*
         * start pushed packets
         */
	usbhs_pkt_start(pipe);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 164 | 100.00% | 3 | 100.00% | 
 | Total | 164 | 100.00% | 3 | 100.00% | 
/*
 *              dma map functions
 */
static int usbhsh_dma_map_ctrl(struct device *dma_dev, struct usbhs_pkt *pkt,
			       int map)
{
	if (map) {
		struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
		struct urb *urb = ureq->urb;
		/* it can not use scatter/gather */
		if (urb->num_sgs)
			return -EINVAL;
		pkt->dma = urb->transfer_dma;
		if (!pkt->dma)
			return -EINVAL;
	}
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 72 | 93.51% | 2 | 66.67% | 
| yoshihiro shimoda | yoshihiro shimoda | 5 | 6.49% | 1 | 33.33% | 
 | Total | 77 | 100.00% | 3 | 100.00% | 
/*
 *              for hc_driver
 */
static int usbhsh_host_start(struct usb_hcd *hcd)
{
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 14 | 100.00% | 1 | 100.00% | 
 | Total | 14 | 100.00% | 1 | 100.00% | 
static void usbhsh_host_stop(struct usb_hcd *hcd)
{
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 10 | 100.00% | 1 | 100.00% | 
 | Total | 10 | 100.00% | 1 | 100.00% | 
static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
			      struct urb *urb,
			      gfp_t mem_flags)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhs_priv_to_dev(priv);
	struct usb_host_endpoint *ep = urb->ep;
	struct usbhsh_device *new_udev = NULL;
	int is_dir_in = usb_pipein(urb->pipe);
	int ret;
	dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
	if (!usbhsh_is_running(hpriv)) {
		ret = -EIO;
		dev_err(dev, "host is not running\n");
		goto usbhsh_urb_enqueue_error_not_linked;
	}
	ret = usb_hcd_link_urb_to_ep(hcd, urb);
	if (ret) {
		dev_err(dev, "urb link failed\n");
		goto usbhsh_urb_enqueue_error_not_linked;
	}
	/*
         * attach udev if needed
         * see [image of mod_host]
         */
	if (!usbhsh_device_get(hpriv, urb)) {
		new_udev = usbhsh_device_attach(hpriv, urb);
		if (!new_udev) {
			ret = -EIO;
			dev_err(dev, "device attach failed\n");
			goto usbhsh_urb_enqueue_error_not_linked;
		}
	}
	/*
         * attach endpoint if needed
         * see [image of mod_host]
         */
	if (!usbhsh_ep_to_uep(ep)) {
		ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags);
		if (ret < 0) {
			dev_err(dev, "endpoint attach failed\n");
			goto usbhsh_urb_enqueue_error_free_device;
		}
	}
	/*
         * attach pipe to endpoint
         * see [image of mod_host]
         */
	ret = usbhsh_pipe_attach(hpriv, urb);
	if (ret < 0) {
		dev_err(dev, "pipe attach failed\n");
		goto usbhsh_urb_enqueue_error_free_endpoint;
	}
	/*
         * push packet
         */
	if (usb_pipecontrol(urb->pipe))
		ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags);
	else
		ret = usbhsh_queue_push(hcd, urb, mem_flags);
	return ret;
usbhsh_urb_enqueue_error_free_endpoint:
	usbhsh_endpoint_detach(hpriv, ep);
usbhsh_urb_enqueue_error_free_device:
	if (new_udev)
		usbhsh_device_detach(hpriv, new_udev);
usbhsh_urb_enqueue_error_not_linked:
	dev_dbg(dev, "%s error\n", __func__);
	return ret;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 327 | 100.00% | 10 | 100.00% | 
 | Total | 327 | 100.00% | 10 | 100.00% | 
static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
	if (ureq) {
		struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
		struct usbhs_pkt *pkt = &ureq->pkt;
		usbhs_pkt_pop(pkt->pipe, pkt);
		usbhsh_queue_done(priv, pkt);
	}
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 84 | 100.00% | 2 | 100.00% | 
 | Total | 84 | 100.00% | 2 | 100.00% | 
static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
				    struct usb_host_endpoint *ep)
{
	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
	struct usbhsh_device *udev;
	struct usbhsh_hpriv *hpriv;
	/*
         * this function might be called manytimes by same hcd/ep
         * in-endpoint == out-endpoint if ep == dcp.
         */
	if (!uep)
		return;
	udev	= usbhsh_uep_to_udev(uep);
	hpriv	= usbhsh_hcd_to_hpriv(hcd);
	usbhsh_endpoint_detach(hpriv, ep);
	/*
         * if there is no endpoint,
         * free device
         */
	if (!usbhsh_device_has_endpoint(udev))
		usbhsh_device_detach(hpriv, udev);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 80 | 100.00% | 4 | 100.00% | 
 | Total | 80 | 100.00% | 4 | 100.00% | 
static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	int roothub_id = 1; /* only 1 root hub */
	/*
         * does port stat was changed ?
         * check USB_PORT_STAT_C_xxx << 16
         */
	if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
		*buf = (1 << roothub_id);
	else
		*buf = 0;
	return !!(*buf);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 64 | 100.00% | 1 | 100.00% | 
 | Total | 64 | 100.00% | 1 | 100.00% | 
static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
				    u16 typeReq, u16 wValue,
				    u16 wIndex, char *buf, u16 wLength)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhs_priv_to_dev(priv);
	switch (wValue) {
	case C_HUB_OVER_CURRENT:
	case C_HUB_LOCAL_POWER:
		dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
		return 0;
	}
	return -EPIPE;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 75 | 100.00% | 1 | 100.00% | 
 | Total | 75 | 100.00% | 1 | 100.00% | 
static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
				     u16 typeReq, u16 wValue,
				     u16 wIndex, char *buf, u16 wLength)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhs_priv_to_dev(priv);
	int enable = (typeReq == SetPortFeature);
	int speed, i, timeout = 128;
	int roothub_id = 1; /* only 1 root hub */
	/* common error */
	if (wIndex > roothub_id || wLength != 0)
		return -EPIPE;
	/* check wValue */
	switch (wValue) {
	case USB_PORT_FEAT_POWER:
		usbhs_vbus_ctrl(priv, enable);
		dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
		break;
	case USB_PORT_FEAT_ENABLE:
	case USB_PORT_FEAT_SUSPEND:
	case USB_PORT_FEAT_C_ENABLE:
	case USB_PORT_FEAT_C_SUSPEND:
	case USB_PORT_FEAT_C_CONNECTION:
	case USB_PORT_FEAT_C_OVER_CURRENT:
	case USB_PORT_FEAT_C_RESET:
		dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
		break;
	case USB_PORT_FEAT_RESET:
		if (!enable)
			break;
		usbhsh_port_stat_clear(hpriv,
				       USB_PORT_STAT_HIGH_SPEED |
				       USB_PORT_STAT_LOW_SPEED);
		usbhsh_queue_force_pop_all(priv);
		usbhs_bus_send_reset(priv);
		msleep(20);
		usbhs_bus_send_sof_enable(priv);
		for (i = 0; i < timeout ; i++) {
			switch (usbhs_bus_get_speed(priv)) {
			case USB_SPEED_LOW:
				speed = USB_PORT_STAT_LOW_SPEED;
				goto got_usb_bus_speed;
			case USB_SPEED_HIGH:
				speed = USB_PORT_STAT_HIGH_SPEED;
				goto got_usb_bus_speed;
			case USB_SPEED_FULL:
				speed = 0;
				goto got_usb_bus_speed;
			}
			msleep(20);
		}
		return -EPIPE;
got_usb_bus_speed:
		usbhsh_port_stat_set(hpriv, speed);
		usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);
		dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
			__func__, speed);
		/* status change is not needed */
		return 0;
	default:
		return -EPIPE;
	}
	/* set/clear status */
	if (enable)
		usbhsh_port_stat_set(hpriv, (1 << wValue));
	else
		usbhsh_port_stat_clear(hpriv, (1 << wValue));
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 312 | 100.00% | 2 | 100.00% | 
 | Total | 312 | 100.00% | 2 | 100.00% | 
static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
				   u16 typeReq, u16 wValue,
				   u16 wIndex, char *buf, u16 wLength)
{
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
	struct device *dev = usbhs_priv_to_dev(priv);
	int roothub_id = 1; /* only 1 root hub */
	switch (typeReq) {
	case GetHubStatus:
		dev_dbg(dev, "%s :: GetHubStatus\n", __func__);
		*buf = 0x00;
		break;
	case GetPortStatus:
		if (wIndex != roothub_id)
			return -EPIPE;
		dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
		*(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
		break;
	case GetHubDescriptor:
		desc->bDescriptorType		= USB_DT_HUB;
		desc->bHubContrCurrent		= 0;
		desc->bNbrPorts			= roothub_id;
		desc->bDescLength		= 9;
		desc->bPwrOn2PwrGood		= 0;
		desc->wHubCharacteristics	=
			cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM);
		desc->u.hs.DeviceRemovable[0]	= (roothub_id << 1);
		desc->u.hs.DeviceRemovable[1]	= ~0;
		dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
		break;
	}
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 211 | 98.14% | 1 | 33.33% | 
| sergei shtylyov | sergei shtylyov | 4 | 1.86% | 2 | 66.67% | 
 | Total | 215 | 100.00% | 3 | 100.00% | 
static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
			      u16 wIndex, char *buf, u16 wLength)
{
	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
	struct device *dev = usbhs_priv_to_dev(priv);
	int ret = -EPIPE;
	switch (typeReq) {
	/* Hub Feature */
	case ClearHubFeature:
	case SetHubFeature:
		ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
					       wValue, wIndex, buf, wLength);
		break;
	/* Port Feature */
	case SetPortFeature:
	case ClearPortFeature:
		ret = __usbhsh_hub_port_feature(hpriv, typeReq,
						wValue, wIndex, buf, wLength);
		break;
	/* Get status */
	case GetHubStatus:
	case GetPortStatus:
	case GetHubDescriptor:
		ret = __usbhsh_hub_get_status(hpriv, typeReq,
					      wValue, wIndex, buf, wLength);
		break;
	}
	dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
		typeReq, ret, usbhsh_port_stat_get(hpriv));
	return ret;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 166 | 100.00% | 1 | 100.00% | 
 | Total | 166 | 100.00% | 1 | 100.00% | 
static int usbhsh_bus_nop(struct usb_hcd *hcd)
{
	/* nothing to do */
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 15 | 100.00% | 1 | 100.00% | 
 | Total | 15 | 100.00% | 1 | 100.00% | 
static struct hc_driver usbhsh_driver = {
	.description =		usbhsh_hcd_name,
	.hcd_priv_size =	sizeof(struct usbhsh_hpriv),
	/*
         * generic hardware linkage
         */
	.flags =		HCD_USB2,
	.start =		usbhsh_host_start,
	.stop =			usbhsh_host_stop,
	/*
         * managing i/o requests and associated device resources
         */
	.urb_enqueue =		usbhsh_urb_enqueue,
	.urb_dequeue =		usbhsh_urb_dequeue,
	.endpoint_disable =	usbhsh_endpoint_disable,
	/*
         * root hub
         */
	.hub_status_data =	usbhsh_hub_status_data,
	.hub_control =		usbhsh_hub_control,
	.bus_suspend =		usbhsh_bus_nop,
	.bus_resume =		usbhsh_bus_nop,
};
/*
 *              interrupt functions
 */
static int usbhsh_irq_attch(struct usbhs_priv *priv,
			    struct usbhs_irq_state *irq_state)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct device *dev = usbhs_priv_to_dev(priv);
	dev_dbg(dev, "device attached\n");
	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
	/*
         * attch interrupt might happen infinitely on some device
         * (on self power USB hub ?)
         * disable it here.
         *
         * usbhsh_is_running() becomes effective
         * according to this process.
         * see
         *      usbhsh_is_running()
         *      usbhsh_urb_enqueue()
         */
	hpriv->mod.irq_attch = NULL;
	usbhs_irq_callback_update(priv, &hpriv->mod);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 81 | 100.00% | 3 | 100.00% | 
 | Total | 81 | 100.00% | 3 | 100.00% | 
static int usbhsh_irq_dtch(struct usbhs_priv *priv,
			   struct usbhs_irq_state *irq_state)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct device *dev = usbhs_priv_to_dev(priv);
	dev_dbg(dev, "device detached\n");
	usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
	/*
         * enable attch interrupt again
         *
         * usbhsh_is_running() becomes invalid
         * according to this process.
         * see
         *      usbhsh_is_running()
         *      usbhsh_urb_enqueue()
         */
	hpriv->mod.irq_attch = usbhsh_irq_attch;
	usbhs_irq_callback_update(priv, &hpriv->mod);
	/*
         * usbhsh_queue_force_pop_all() should be called
         * after usbhsh_is_running() becomes invalid.
         */
	usbhsh_queue_force_pop_all(priv);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 87 | 100.00% | 4 | 100.00% | 
 | Total | 87 | 100.00% | 4 | 100.00% | 
static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
				struct usbhs_irq_state *irq_state)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct device *dev = usbhs_priv_to_dev(priv);
	dev_dbg(dev, "setup packet OK\n");
	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 55 | 100.00% | 2 | 100.00% | 
 | Total | 55 | 100.00% | 2 | 100.00% | 
static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
				struct usbhs_irq_state *irq_state)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct device *dev = usbhs_priv_to_dev(priv);
	dev_dbg(dev, "setup packet Err\n");
	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 55 | 100.00% | 2 | 100.00% | 
 | Total | 55 | 100.00% | 2 | 100.00% | 
/*
 *              module start/stop
 */
static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct usbhs_pipe *pipe;
	struct renesas_usbhs_driver_pipe_config *pipe_configs =
					usbhs_get_dparam(priv, pipe_configs);
	int pipe_size = usbhs_get_dparam(priv, pipe_size);
	int old_type, dir_in, i;
	/* init all pipe */
	old_type = USB_ENDPOINT_XFER_CONTROL;
	for (i = 0; i < pipe_size; i++) {
		/*
                 * data "output" will be finished as soon as possible,
                 * but there is no guaranty at data "input" case.
                 *
                 * "input" needs "standby" pipe.
                 * So, "input" direction pipe > "output" direction pipe
                 * is good idea.
                 *
                 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
                 * and the other will be input direction here.
                 *
                 * ex)
                 * ...
                 * USB_ENDPOINT_XFER_ISOC -> dir out
                 * USB_ENDPOINT_XFER_ISOC -> dir in
                 * USB_ENDPOINT_XFER_BULK -> dir out
                 * USB_ENDPOINT_XFER_BULK -> dir in
                 * USB_ENDPOINT_XFER_BULK -> dir in
                 * ...
                 */
		dir_in = (pipe_configs[i].type == old_type);
		old_type = pipe_configs[i].type;
		if (USB_ENDPOINT_XFER_CONTROL == pipe_configs[i].type) {
			pipe = usbhs_dcp_malloc(priv);
			usbhsh_hpriv_to_dcp(hpriv) = pipe;
		} else {
			pipe = usbhs_pipe_malloc(priv,
						 pipe_configs[i].type,
						 dir_in);
		}
		pipe->mod_private = NULL;
	}
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 134 | 89.33% | 2 | 66.67% | 
| yoshihiro shimoda | yoshihiro shimoda | 16 | 10.67% | 1 | 33.33% | 
 | Total | 150 | 100.00% | 3 | 100.00% | 
static int usbhsh_start(struct usbhs_priv *priv)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
	struct device *dev = usbhs_priv_to_dev(priv);
	int ret;
	/* add hcd */
	ret = usb_add_hcd(hcd, 0, 0);
	if (ret < 0)
		return 0;
	device_wakeup_enable(hcd->self.controller);
	/*
         * pipe initialize and enable DCP
         */
	usbhs_fifo_init(priv);
	usbhs_pipe_init(priv,
			usbhsh_dma_map_ctrl);
	usbhsh_pipe_init_for_host(priv);
	/*
         * system config enble
         * - HI speed
         * - host
         * - usb module
         */
	usbhs_sys_host_ctrl(priv, 1);
	/*
         * enable irq callback
         */
	mod->irq_attch		= usbhsh_irq_attch;
	mod->irq_dtch		= usbhsh_irq_dtch;
	mod->irq_sack		= usbhsh_irq_setup_ack;
	mod->irq_sign		= usbhsh_irq_setup_err;
	usbhs_irq_callback_update(priv, mod);
	dev_dbg(dev, "start host\n");
	return ret;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 139 | 91.45% | 1 | 33.33% | 
| peter chen | peter chen | 9 | 5.92% | 1 | 33.33% | 
| yoshihiro shimoda | yoshihiro shimoda | 4 | 2.63% | 1 | 33.33% | 
 | Total | 152 | 100.00% | 3 | 100.00% | 
static int usbhsh_stop(struct usbhs_priv *priv)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
	struct device *dev = usbhs_priv_to_dev(priv);
	/*
         * disable irq callback
         */
	mod->irq_attch	= NULL;
	mod->irq_dtch	= NULL;
	mod->irq_sack	= NULL;
	mod->irq_sign	= NULL;
	usbhs_irq_callback_update(priv, mod);
	usb_remove_hcd(hcd);
	/* disable sys */
	usbhs_sys_host_ctrl(priv, 0);
	dev_dbg(dev, "quit host\n");
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 106 | 100.00% | 2 | 100.00% | 
 | Total | 106 | 100.00% | 2 | 100.00% | 
int usbhs_mod_host_probe(struct usbhs_priv *priv)
{
	struct usbhsh_hpriv *hpriv;
	struct usb_hcd *hcd;
	struct usbhsh_device *udev;
	struct device *dev = usbhs_priv_to_dev(priv);
	int i;
	/* initialize hcd */
	hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
	if (!hcd) {
		dev_err(dev, "Failed to create hcd\n");
		return -ENOMEM;
	}
	hcd->has_tt = 1; /* for low/full speed */
	/*
         * CAUTION
         *
         * There is no guarantee that it is possible to access usb module here.
         * Don't accesses to it.
         * The accesse will be enable after "usbhsh_start"
         */
	hpriv = usbhsh_hcd_to_hpriv(hcd);
	/*
         * register itself
         */
	usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);
	/* init hpriv */
	hpriv->mod.name		= "host";
	hpriv->mod.start	= usbhsh_start;
	hpriv->mod.stop		= usbhsh_stop;
	usbhsh_port_stat_init(hpriv);
	/* init all device */
	usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
		udev->usbv	= NULL;
		INIT_LIST_HEAD(&udev->ep_list_head);
	}
	dev_info(dev, "host probed\n");
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 162 | 100.00% | 2 | 100.00% | 
 | Total | 162 | 100.00% | 2 | 100.00% | 
int usbhs_mod_host_remove(struct usbhs_priv *priv)
{
	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
	usb_put_hcd(hcd);
	return 0;
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 38 | 100.00% | 1 | 100.00% | 
 | Total | 38 | 100.00% | 1 | 100.00% | 
Overall Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| kuninori morimoto | kuninori morimoto | 5669 | 99.33% | 36 | 85.71% | 
| yoshihiro shimoda | yoshihiro shimoda | 25 | 0.44% | 3 | 7.14% | 
| peter chen | peter chen | 9 | 0.16% | 1 | 2.38% | 
| sergei shtylyov | sergei shtylyov | 4 | 0.07% | 2 | 4.76% | 
 | Total | 5707 | 100.00% | 42 | 100.00% | 
  
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.