/* * Definitions for the KLSI KL5KUSB105 serial port adapter */ /* vendor/product pairs that are known to contain this chipset */ #define PALMCONNECT_VID 0x0830 #define PALMCONNECT_PID 0x0080 #define KLSI_VID 0x05e9 #define KLSI_KL5KUSB105D_PID 0x00c0 /* Vendor commands: */ /* port table -- the chip supports up to 4 channels */ /* baud rates */ enum { kl5kusb105a_sio_b115200 = 0, kl5kusb105a_sio_b57600 = 1, kl5kusb105a_sio_b38400 = 2, kl5kusb105a_sio_b19200 = 4, kl5kusb105a_sio_b14400 = 5, kl5kusb105a_sio_b9600 = 6, kl5kusb105a_sio_b4800 = 8, /* unchecked */ kl5kusb105a_sio_b2400 = 9, /* unchecked */ kl5kusb105a_sio_b1200 = 0xa, /* unchecked */ kl5kusb105a_sio_b600 = 0xb /* unchecked */ }; /* data bits */ #define kl5kusb105a_dtb_7 7 #define kl5kusb105a_dtb_8 8 /* requests: */ #define KL5KUSB105A_SIO_SET_DATA 1 #define KL5KUSB105A_SIO_POLL 2 #define KL5KUSB105A_SIO_CONFIGURE 3 /* values used for request KL5KUSB105A_SIO_CONFIGURE */ #define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3 #define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2 /* Interpretation of modem status lines */ /* These need sorting out by individually connecting pins and checking * results. FIXME! * When data is being sent we see 0x30 in the lower byte; this must * contain DSR and CTS ... */ #define KL5KUSB105A_DSR ((1<<4) | (1<<5)) #define KL5KUSB105A_CTS ((1<<5) | (1<<4)) #define KL5KUSB105A_WANTS_TO_SEND 0x30 #if 0 #define KL5KUSB105A_DTR /* Data Terminal Ready */ #define KL5KUSB105A_CTS /* Clear To Send */ #define KL5KUSB105A_CD /* Carrier Detect */ #define KL5KUSB105A_DSR /* Data Set Ready */ #define KL5KUSB105A_RxD /* Receive pin */ #define KL5KUSB105A_LE #define KL5KUSB105A_RTS #define KL5KUSB105A_ST #define KL5KUSB105A_SR #define KL5KUSB105A_RI /* Ring Indicator */ #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp | |
| linus torvalds | linus torvalds | 112 | 72.73% | 1 | 33.33% |
| greg kroah-hartman | greg kroah-hartman | 42 | 27.27% | 2 | 66.67% |
| Total | 154 | 100.00% | 3 | 100.00% |