Release 4.7 drivers/usb/serial/mct_u232.c

/*
 * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver
 *
 *   Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 * This program is largely derived from the Belkin USB Serial Adapter Driver
 * (see belkin_sa.[ch]). All of the information about the device was acquired
 * by using SniffUSB on Windows98. For technical details see mct_u232.h.
 *
 * William G. Greathouse and Greg Kroah-Hartman provided great help on how to
 * do the reverse engineering and how to write a USB serial device driver.
 *
 * TO BE DONE, TO BE CHECKED:
 *   DTR/RTS signal handling may be incomplete or incorrect. I have mainly
 *   implemented what I have seen with SniffUSB or found in belkin_sa.c.
 *   For further TODOs check also belkin_sa.c.
 */

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <asm/unaligned.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
#include "mct_u232.h"


#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"

#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"

/*
 * Function prototypes
 */
static int  mct_u232_port_probe(struct usb_serial_port *port);
static int  mct_u232_port_remove(struct usb_serial_port *remove);
static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
static void mct_u232_close(struct usb_serial_port *port);
static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
static void mct_u232_read_int_callback(struct urb *urb);
static void mct_u232_set_termios(struct tty_struct *tty,
			struct usb_serial_port *port, struct ktermios *old);
static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
static int  mct_u232_tiocmget(struct tty_struct *tty);
static int  mct_u232_tiocmset(struct tty_struct *tty,
			unsigned int set, unsigned int clear);
static void mct_u232_throttle(struct tty_struct *tty);
static void mct_u232_unthrottle(struct tty_struct *tty);


/*
 * All of the device info needed for the MCT USB-RS232 converter.
 */

static const struct usb_device_id id_table[] = {
	{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
	{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
	{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
	{ USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) },
	{ }		/* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);


static struct usb_serial_driver mct_u232_device = {
	.driver = {
		.owner =	THIS_MODULE,
		.name =		"mct_u232",
        },
	.description =	     "MCT U232",
	.id_table =	     id_table,
	.num_ports =	     1,
	.open =		     mct_u232_open,
	.close =	     mct_u232_close,
	.dtr_rts =	     mct_u232_dtr_rts,
	.throttle =	     mct_u232_throttle,
	.unthrottle =	     mct_u232_unthrottle,
	.read_int_callback = mct_u232_read_int_callback,
	.set_termios =	     mct_u232_set_termios,
	.break_ctl =	     mct_u232_break_ctl,
	.tiocmget =	     mct_u232_tiocmget,
	.tiocmset =	     mct_u232_tiocmset,
	.tiocmiwait =        usb_serial_generic_tiocmiwait,
	.port_probe =        mct_u232_port_probe,
	.port_remove =       mct_u232_port_remove,
	.get_icount =        usb_serial_generic_get_icount,
};


static struct usb_serial_driver * const serial_drivers[] = {
	&mct_u232_device, NULL
};


struct mct_u232_private {
	
struct urb *read_urb;
	
spinlock_t lock;
	
unsigned int	     control_state; /* Modem Line Setting (TIOCM) */
	
unsigned char        last_lcr;      /* Line Control Register */
	
unsigned char	     last_lsr;      /* Line Status Register */
	
unsigned char	     last_msr;      /* Modem Status Register */
	
unsigned int	     rx_flags;      /* Throttling flags */
};


#define THROTTLED		0x01

/*
 * Handle vendor specific USB requests
 */


#define WDR_TIMEOUT 5000 
/* default urb timeout */

/*
 * Later day 2.6.0-test kernels have new baud rates like B230400 which
 * we do not know how to support. We ignore them for the moment.
 */


static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
					speed_t value, speed_t *result)
{
	*result = value;

	if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
		|| le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
		switch (value) {
		case 300:
			return 0x01;
		case 600:
			return 0x02; /* this one not tested */
		case 1200:
			return 0x03;
		case 2400:
			return 0x04;
		case 4800:
			return 0x06;
		case 9600:
			return 0x08;
		case 19200:
			return 0x09;
		case 38400:
			return 0x0a;
		case 57600:
			return 0x0b;
		case 115200:
			return 0x0c;
		default:
			*result = 9600;
			return 0x08;
		}
	} else {
		/* FIXME: Can we use any divider - should we do
                   divider = 115200/value;
                   real baud = 115200/divider */
		switch (value) {
		case 300: break;
		case 600: break;
		case 1200: break;
		case 2400: break;
		case 4800: break;
		case 9600: break;
		case 19200: break;
		case 38400: break;
		case 57600: break;
		case 115200: break;
		default:
			value = 9600;
			*result = 9600;
		}
		return 115200/value;
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
linus torvalds
linus torvalds
100
51.55%
2
28.57%
pete zaitcev
pete zaitcev
49
25.26%
2
28.57%
alan cox
alan cox
39
20.10%
2
28.57%
greg kroah-hartman
greg kroah-hartman
6
3.09%
1
14.29%
Total
194
100.00%
7
100.00%



static int mct_u232_set_baud_rate(struct tty_struct *tty,
	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
{
	unsigned int divisor;
	int rc;
	unsigned char *buf;
	unsigned char cts_enable_byte = 0;
	speed_t speed;

	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
	if (buf == NULL)
		return -ENOMEM;

	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
	put_unaligned_le32(cpu_to_le32(divisor), buf);
	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
				MCT_U232_SET_BAUD_RATE_REQUEST,
				MCT_U232_SET_REQUEST_TYPE,
				0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
				WDR_TIMEOUT);
	if (rc < 0)	/*FIXME: What value speed results */
		dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
			value, rc);
	else
		tty_encode_baud_rate(tty, speed, speed);
	dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor);

	/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
           always sends two extra USB 'device request' messages after the
           'baud rate change' message.  The actual functionality of the
           request codes in these messages is not fully understood but these
           particular codes are never seen in any operation besides a baud
           rate change.  Both of these messages send a single byte of data.
           In the first message, the value of this byte is always zero.

           The second message has been determined experimentally to control
           whether data will be transmitted to a device which is not asserting
           the 'CTS' signal.  If the second message's data byte is zero, data
           will be transmitted even if 'CTS' is not asserted (i.e. no hardware
           flow control).  if the second message's data byte is nonzero (a
           value of 1 is used by this driver), data will not be transmitted to
           a device which is not asserting 'CTS'.
        */

	buf[0] = 0;
	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
				MCT_U232_SET_UNKNOWN1_REQUEST,
				MCT_U232_SET_REQUEST_TYPE,
				0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
				WDR_TIMEOUT);
	if (rc < 0)
		dev_err(&port->dev, "Sending USB device request code %d "
			"failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
			rc);

	if (port && C_CRTSCTS(tty))
	   cts_enable_byte = 1;

	dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n",
		cts_enable_byte);
	buf[0] = cts_enable_byte;
	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
			MCT_U232_SET_CTS_REQUEST,
			MCT_U232_SET_REQUEST_TYPE,
			0, 0, buf, MCT_U232_SET_CTS_SIZE,
			WDR_TIMEOUT);
	if (rc < 0)
		dev_err(&port->dev, "Sending USB device request code %d "
			"failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);

	kfree(buf);
	return rc;
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
bill marr
bill marr
88
27.76%
1
8.33%
pre-git
pre-git
75
23.66%
1
8.33%
pete zaitcev
pete zaitcev
54
17.03%
1
8.33%
greg kroah-hartman
greg kroah-hartman
37
11.67%
2
16.67%
dave platt
dave platt
32
10.09%
1
8.33%
alan cox
alan cox
24
7.57%
4
33.33%
linus torvalds
linus torvalds
7
2.21%
2
16.67%
Total
317
100.00%
12
100.00%

/* mct_u232_set_baud_rate */



static int mct_u232_set_line_ctrl(struct usb_serial_port *port,
				  unsigned char lcr)
{
	int rc;
	unsigned char *buf;

	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
	if (buf == NULL)
		return -ENOMEM;

	buf[0] = lcr;
	rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
			MCT_U232_SET_LINE_CTRL_REQUEST,
			MCT_U232_SET_REQUEST_TYPE,
			0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
			WDR_TIMEOUT);
	if (rc < 0)
		dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
	dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr);
	kfree(buf);
	return rc;
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
68
54.40%
1
25.00%
pete zaitcev
pete zaitcev
37
29.60%
1
25.00%
greg kroah-hartman
greg kroah-hartman
20
16.00%
2
50.00%
Total
125
100.00%
4
100.00%

/* mct_u232_set_line_ctrl */



static int mct_u232_set_modem_ctrl(struct usb_serial_port *port,
				   unsigned int control_state)
{
	int rc;
	unsigned char mcr;
	unsigned char *buf;

	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
	if (buf == NULL)
		return -ENOMEM;

	mcr = MCT_U232_MCR_NONE;
	if (control_state & TIOCM_DTR)
		mcr |= MCT_U232_MCR_DTR;
	if (control_state & TIOCM_RTS)
		mcr |= MCT_U232_MCR_RTS;

	buf[0] = mcr;
	rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
			MCT_U232_SET_MODEM_CTRL_REQUEST,
			MCT_U232_SET_REQUEST_TYPE,
			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
			WDR_TIMEOUT);
	kfree(buf);

	dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr);

	if (rc < 0) {
		dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
		return rc;
	}
	return 0;
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
86
53.75%
1
16.67%
pete zaitcev
pete zaitcev
37
23.12%
2
33.33%
greg kroah-hartman
greg kroah-hartman
20
12.50%
2
33.33%
alan cox
alan cox
17
10.62%
1
16.67%
Total
160
100.00%
6
100.00%

/* mct_u232_set_modem_ctrl */



static int mct_u232_get_modem_stat(struct usb_serial_port *port,
				   unsigned char *msr)
{
	int rc;
	unsigned char *buf;

	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
	if (buf == NULL) {
		*msr = 0;
		return -ENOMEM;
	}
	rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
			MCT_U232_GET_MODEM_STAT_REQUEST,
			MCT_U232_GET_REQUEST_TYPE,
			0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
			WDR_TIMEOUT);
	if (rc < 0) {
		dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc);
		*msr = 0;
	} else {
		*msr = buf[0];
	}
	dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr);
	kfree(buf);
	return rc;
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
75
52.45%
1
25.00%
pete zaitcev
pete zaitcev
48
33.57%
1
25.00%
greg kroah-hartman
greg kroah-hartman
20
13.99%
2
50.00%
Total
143
100.00%
4
100.00%

/* mct_u232_get_modem_stat */



static void mct_u232_msr_to_icount(struct async_icount *icount,
						unsigned char msr)
{
	/* Translate Control Line states */
	if (msr & MCT_U232_MSR_DDSR)
		icount->dsr++;
	if (msr & MCT_U232_MSR_DCTS)
		icount->cts++;
	if (msr & MCT_U232_MSR_DRI)
		icount->rng++;
	if (msr & MCT_U232_MSR_DCD)
		icount->dcd++;
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
vadim tsozik
vadim tsozik
60
100.00%
1
100.00%
Total
60
100.00%
1
100.00%

/* mct_u232_msr_to_icount */



static void mct_u232_msr_to_state(struct usb_serial_port *port,
				  unsigned int *control_state, unsigned char msr)
{
	/* Translate Control Line states */
	if (msr & MCT_U232_MSR_DSR)
		*control_state |=  TIOCM_DSR;
	else
		*control_state &= ~TIOCM_DSR;
	if (msr & MCT_U232_MSR_CTS)
		*control_state |=  TIOCM_CTS;
	else
		*control_state &= ~TIOCM_CTS;
	if (msr & MCT_U232_MSR_RI)
		*control_state |=  TIOCM_RI;
	else
		*control_state &= ~TIOCM_RI;
	if (msr & MCT_U232_MSR_CD)
		*control_state |=  TIOCM_CD;
	else
		*control_state &= ~TIOCM_CD;
	dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state);
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
95
87.96%
1
33.33%
greg kroah-hartman
greg kroah-hartman
12
11.11%
1
33.33%
pete zaitcev
pete zaitcev
1
0.93%
1
33.33%
Total
108
100.00%
3
100.00%

/* mct_u232_msr_to_state */

/*
 * Driver's tty interface functions
 */



static int mct_u232_port_probe(struct usb_serial_port *port)
{
	struct usb_serial *serial = port->serial;
	struct mct_u232_private *priv;

	/* check first to simplify error handling */
	if (!serial->port[1] || !serial->port[1]->interrupt_in_urb) {
		dev_err(&port->dev, "expected endpoint missing\n");
		return -ENODEV;
	}

	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	/* Use second interrupt-in endpoint for reading. */
	priv->read_urb = serial->port[1]->interrupt_in_urb;
	priv->read_urb->context = port;

	spin_lock_init(&priv->lock);

	usb_set_serial_port_data(port, priv);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
johan hovold
johan hovold
65
52.42%
2
40.00%
oliver neukum
oliver neukum
46
37.10%
1
20.00%
pre-git
pre-git
8
6.45%
1
20.00%
greg kroah-hartman
greg kroah-hartman
5
4.03%
1
20.00%
Total
124
100.00%
5
100.00%



static int mct_u232_port_remove(struct usb_serial_port *port)
{
	struct mct_u232_private *priv;

	priv = usb_get_serial_port_data(port);
	kfree(priv);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
johan hovold
johan hovold
17
54.84%
1
33.33%
greg kroah-hartman
greg kroah-hartman
7
22.58%
1
33.33%
pre-git
pre-git
7
22.58%
1
33.33%
Total
31
100.00%
3
100.00%



static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
	struct usb_serial *serial = port->serial;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	int retval = 0;
	unsigned int control_state;
	unsigned long flags;
	unsigned char last_lcr;
	unsigned char last_msr;

	/* Compensate for a hardware bug: although the Sitecom U232-P25
         * device reports a maximum output packet size of 32 bytes,
         * it seems to be able to accept only 16 bytes (and that's what
         * SniffUSB says too...)
         */
	if (le16_to_cpu(serial->dev->descriptor.idProduct)
						== MCT_U232_SITECOM_PID)
		port->bulk_out_size = 16;

	/* Do a defined restart: the normal serial device seems to
         * always turn on DTR and RTS here, so do the same. I'm not
         * sure if this is really necessary. But it should not harm
         * either.
         */
	spin_lock_irqsave(&priv->lock, flags);
	if (tty && C_BAUD(tty))
		priv->control_state = TIOCM_DTR | TIOCM_RTS;
	else
		priv->control_state = 0;

	priv->last_lcr = (MCT_U232_DATA_BITS_8 |
			  MCT_U232_PARITY_NONE |
			  MCT_U232_STOP_BITS_1);
	control_state = priv->control_state;
	last_lcr = priv->last_lcr;
	spin_unlock_irqrestore(&priv->lock, flags);
	mct_u232_set_modem_ctrl(port, control_state);
	mct_u232_set_line_ctrl(port, last_lcr);

	/* Read modem status and update control state */
	mct_u232_get_modem_stat(port, &last_msr);
	spin_lock_irqsave(&priv->lock, flags);
	priv->last_msr = last_msr;
	mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
	spin_unlock_irqrestore(&priv->lock, flags);

	retval = usb_submit_urb(priv->read_urb, GFP_KERNEL);
	if (retval) {
		dev_err(&port->dev,
			"usb_submit_urb(read) failed pipe 0x%x err %d\n",
			port->read_urb->pipe, retval);
		goto error;
	}

	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
	if (retval) {
		usb_kill_urb(priv->read_urb);
		dev_err(&port->dev,
			"usb_submit_urb(read int) failed pipe 0x%x err %d",
			port->interrupt_in_urb->pipe, retval);
		goto error;
	}
	return 0;

error:
	return retval;
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
greg kroah-hartman
greg kroah-hartman
107
35.55%
7
41.18%
pre-git
pre-git
107
35.55%
1
5.88%
linus torvalds
linus torvalds
39
12.96%
2
11.76%
oliver neukum
oliver neukum
17
5.65%
1
5.88%
pete zaitcev
pete zaitcev
17
5.65%
2
11.76%
alan cox
alan cox
8
2.66%
2
11.76%
johan hovold
johan hovold
3
1.00%
1
5.88%
peter hurley
peter hurley
3
1.00%
1
5.88%
Total
301
100.00%
17
100.00%

/* mct_u232_open */



static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
{
	unsigned int control_state;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);

	spin_lock_irq(&priv->lock);
	if (on)
		priv->control_state |= TIOCM_DTR | TIOCM_RTS;
	else
		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
	control_state = priv->control_state;
	spin_unlock_irq(&priv->lock);

	mct_u232_set_modem_ctrl(port, control_state);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
dave platt
dave platt
53
65.43%
1
25.00%
alan cox
alan cox
16
19.75%
1
25.00%
pre-git
pre-git
10
12.35%
1
25.00%
oliver neukum
oliver neukum
2
2.47%
1
25.00%
Total
81
100.00%
4
100.00%



static void mct_u232_close(struct usb_serial_port *port)
{
	struct mct_u232_private *priv = usb_get_serial_port_data(port);

	usb_kill_urb(priv->read_urb);
	usb_kill_urb(port->interrupt_in_urb);

	usb_serial_generic_close(port);
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
johan hovold
johan hovold
25
62.50%
3
50.00%
alan cox
alan cox
10
25.00%
1
16.67%
pre-git
pre-git
4
10.00%
1
16.67%
linus torvalds
linus torvalds
1
2.50%
1
16.67%
Total
40
100.00%
6
100.00%

/* mct_u232_close */




static void mct_u232_read_int_callback(struct urb *urb)
{
	struct usb_serial_port *port = urb->context;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	unsigned char *data = urb->transfer_buffer;
	int retval;
	int status = urb->status;
	unsigned long flags;

	switch (status) {
	case 0:
		/* success */
		break;
	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		/* this urb is terminated, clean up */
		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
			__func__, status);
		return;
	default:
		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
			__func__, status);
		goto exit;
	}

	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);

	/*
         * Work-a-round: handle the 'usual' bulk-in pipe here
         */
	if (urb->transfer_buffer_length > 2) {
		if (urb->actual_length) {
			tty_insert_flip_string(&port->port, data,
					urb->actual_length);
			tty_flip_buffer_push(&port->port);
		}
		goto exit;
	}

	/*
         * The interrupt-in pipe signals exceptional conditions (modem line
         * signal changes and errors). data[0] holds MSR, data[1] holds LSR.
         */
	spin_lock_irqsave(&priv->lock, flags);
	priv->last_msr = data[MCT_U232_MSR_INDEX];

	/* Record Control Line states */
	mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);

	mct_u232_msr_to_icount(&port->icount, priv->last_msr);

#if 0
	/* Not yet handled. See belkin_sa.c for further information */
	/* Now to report any errors */
	priv->last_lsr = data[MCT_U232_LSR_INDEX];
	/*
         * fill in the flip buffer here, but I do not know the relation
         * to the current/next receive buffer or characters.  I need
         * to look in to this before committing any code.
         */
	if (priv->last_lsr & MCT_U232_LSR_ERR) {
                tty = tty_port_tty_get(&port->port);
		/* Overrun Error */
		if (priv->last_lsr & MCT_U232_LSR_OE) {
                }
		/* Parity Error */
		if (priv->last_lsr & MCT_U232_LSR_PE) {
                }
		/* Framing Error */
		if (priv->last_lsr & MCT_U232_LSR_FE) {
                }
		/* Break Indicator */
		if (priv->last_lsr & MCT_U232_LSR_BI) {
                }
                tty_kref_put(tty);
        }
#endif
	wake_up_interruptible(&port->port.delta_msr_wait);
	spin_unlock_irqrestore(&priv->lock, flags);
exit:
	retval = usb_submit_urb(urb, GFP_ATOMIC);
	if (retval)
		dev_err(&port->dev,
			"%s - usb_submit_urb failed with result %d\n",
			__func__, retval);
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
greg kroah-hartman
greg kroah-hartman
118
41.55%
8
40.00%
pre-git
pre-git
117
41.20%
1
5.00%
vadim tsozik
vadim tsozik
17
5.99%
1
5.00%
alan cox
alan cox
12
4.23%
4
20.00%
jiri slaby
jiri slaby
11
3.87%
2
10.00%
johan hovold
johan hovold
5
1.76%
3
15.00%
harvey harrison
harvey harrison
4
1.41%
1
5.00%
Total
284
100.00%
20
100.00%

/* mct_u232_read_int_callback */



static void mct_u232_set_termios(struct tty_struct *tty,
				 struct usb_serial_port *port,
				 struct ktermios *old_termios)
{
	struct usb_serial *serial = port->serial;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	struct ktermios *termios = &tty->termios;
	unsigned int cflag = termios->c_cflag;
	unsigned int old_cflag = old_termios->c_cflag;
	unsigned long flags;
	unsigned int control_state;
	unsigned char last_lcr;

	/* get a local copy of the current port settings */
	spin_lock_irqsave(&priv->lock, flags);
	control_state = priv->control_state;
	spin_unlock_irqrestore(&priv->lock, flags);
	last_lcr = 0;

	/*
         * Update baud rate.
         * Do not attempt to cache old rates and skip settings,
         * disconnects screw such tricks up completely.
         * Premature optimization is the root of all evil.
         */

	/* reassert DTR and RTS on transition from B0 */
	if ((old_cflag & CBAUD) == B0) {
		dev_dbg(&port->dev, "%s: baud was B0\n", __func__);
		control_state |= TIOCM_DTR | TIOCM_RTS;
		mct_u232_set_modem_ctrl(port, control_state);
	}

	mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));

	if ((cflag & CBAUD) == B0) {
		dev_dbg(&port->dev, "%s: baud is B0\n", __func__);
		/* Drop RTS and DTR */
		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
		mct_u232_set_modem_ctrl(port, control_state);
	}

	/*
         * Update line control register (LCR)
         */

	/* set the parity */
	if (cflag & PARENB)
		last_lcr |= (cflag & PARODD) ?
			MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
	else
		last_lcr |= MCT_U232_PARITY_NONE;

	/* set the number of data bits */
	switch (cflag & CSIZE) {
	case CS5:
		last_lcr |= MCT_U232_DATA_BITS_5; break;
	case CS6:
		last_lcr |= MCT_U232_DATA_BITS_6; break;
	case CS7:
		last_lcr |= MCT_U232_DATA_BITS_7; break;
	case CS8:
		last_lcr |= MCT_U232_DATA_BITS_8; break;
	default:
		dev_err(&port->dev,
			"CSIZE was not CS5-CS8, using default of 8\n");
		last_lcr |= MCT_U232_DATA_BITS_8;
		break;
	}

	termios->c_cflag &= ~CMSPAR;

	/* set the number of stop bits */
	last_lcr |= (cflag & CSTOPB) ?
		MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;

	mct_u232_set_line_ctrl(port, last_lcr);

	/* save off the modified port settings */
	spin_lock_irqsave(&priv->lock, flags);
	priv->control_state = control_state;
	priv->last_lcr = last_lcr;
	spin_unlock_irqrestore(&priv->lock, flags);
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
208
60.29%
1
7.14%
greg kroah-hartman
greg kroah-hartman
95
27.54%
5
35.71%
alan cox
alan cox
30
8.70%
5
35.71%
pete zaitcev
pete zaitcev
6
1.74%
1
7.14%
dave platt
dave platt
4
1.16%
1
7.14%
harvey harrison
harvey harrison
2
0.58%
1
7.14%
Total
345
100.00%
14
100.00%

/* mct_u232_set_termios */



static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
{
	struct usb_serial_port *port = tty->driver_data;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	unsigned char lcr;
	unsigned long flags;

	spin_lock_irqsave(&priv->lock, flags);
	lcr = priv->last_lcr;

	if (break_state)
		lcr |= MCT_U232_SET_BREAK;
	spin_unlock_irqrestore(&priv->lock, flags);

	mct_u232_set_line_ctrl(port, lcr);
} 
Contributors
Person
Tokens
Prop
Commits
CommitProp
greg kroah-hartman
greg kroah-hartman
34
41.46%
3
50.00%
pre-git
pre-git
29
35.37%
1
16.67%
alan cox
alan cox
19
23.17%
2
33.33%
Total
82
100.00%
6
100.00%

/* mct_u232_break_ctl */




static int mct_u232_tiocmget(struct tty_struct *tty)
{
	struct usb_serial_port *port = tty->driver_data;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	unsigned int control_state;
	unsigned long flags;

	spin_lock_irqsave(&priv->lock, flags);
	control_state = priv->control_state;
	spin_unlock_irqrestore(&priv->lock, flags);

	return control_state;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
greg kroah-hartman
greg kroah-hartman
40
59.70%
3
50.00%
pre-git
pre-git
15
22.39%
1
16.67%
alan cox
alan cox
11
16.42%
1
16.67%
pete zaitcev
pete zaitcev
1
1.49%
1
16.67%
Total
67
100.00%
6
100.00%



static int mct_u232_tiocmset(struct tty_struct *tty,
			      unsigned int set, unsigned int clear)
{
	struct usb_serial_port *port = tty->driver_data;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	unsigned int control_state;
	unsigned long flags;

	spin_lock_irqsave(&priv->lock, flags);
	control_state = priv->control_state;

	if (set & TIOCM_RTS)
		control_state |= TIOCM_RTS;
	if (set & TIOCM_DTR)
		control_state |= TIOCM_DTR;
	if (clear & TIOCM_RTS)
		control_state &= ~TIOCM_RTS;
	if (clear & TIOCM_DTR)
		control_state &= ~TIOCM_DTR;

	priv->control_state = control_state;
	spin_unlock_irqrestore(&priv->lock, flags);
	return mct_u232_set_modem_ctrl(port, control_state);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
greg kroah-hartman
greg kroah-hartman
77
60.16%
3
50.00%
pre-git
pre-git
39
30.47%
1
16.67%
alan cox
alan cox
11
8.59%
1
16.67%
pete zaitcev
pete zaitcev
1
0.78%
1
16.67%
Total
128
100.00%
6
100.00%



static void mct_u232_throttle(struct tty_struct *tty)
{
	struct usb_serial_port *port = tty->driver_data;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	unsigned int control_state;

	spin_lock_irq(&priv->lock);
	priv->rx_flags |= THROTTLED;
	if (C_CRTSCTS(tty)) {
		priv->control_state &= ~TIOCM_RTS;
		control_state = priv->control_state;
		spin_unlock_irq(&priv->lock);
		mct_u232_set_modem_ctrl(port, control_state);
	} else {
		spin_unlock_irq(&priv->lock);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
dave platt
dave platt
78
81.25%
1
25.00%
alan cox
alan cox
9
9.38%
1
25.00%
greg kroah-hartman
greg kroah-hartman
6
6.25%
1
25.00%
oliver neukum
oliver neukum
3
3.12%
1
25.00%
Total
96
100.00%
4
100.00%



static void mct_u232_unthrottle(struct tty_struct *tty)
{
	struct usb_serial_port *port = tty->driver_data;
	struct mct_u232_private *priv = usb_get_serial_port_data(port);
	unsigned int control_state;

	spin_lock_irq(&priv->lock);
	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
		priv->rx_flags &= ~THROTTLED;
		priv->control_state |= TIOCM_RTS;
		control_state = priv->control_state;
		spin_unlock_irq(&priv->lock);
		mct_u232_set_modem_ctrl(port, control_state);
	} else {
		spin_unlock_irq(&priv->lock);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
dave platt
dave platt
90
86.54%
1
33.33%
alan cox
alan cox
11
10.58%
1
33.33%
oliver neukum
oliver neukum
3
2.88%
1
33.33%
Total
104
100.00%
3
100.00%

module_usb_serial_driver(serial_drivers, id_table);


MODULE_AUTHOR(DRIVER_AUTHOR);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
1125
34.59%
1
1.37%
greg kroah-hartman
greg kroah-hartman
666
20.48%
22
30.14%
dave platt
dave platt
292
8.98%
1
1.37%
alan cox
alan cox
255
7.84%
11
15.07%
pete zaitcev
pete zaitcev
255
7.84%
4
5.48%
linus torvalds
linus torvalds
210
6.46%
12
16.44%
johan hovold
johan hovold
147
4.52%
8
10.96%
bill marr
bill marr
88
2.71%
1
1.37%
vadim tsozik
vadim tsozik
85
2.61%
1
1.37%
oliver neukum
oliver neukum
71
2.18%
4
5.48%
rusty russell
rusty russell
20
0.62%
1
1.37%
alan stern
alan stern
16
0.49%
1
1.37%
jiri slaby
jiri slaby
11
0.34%
2
2.74%
harvey harrison
harvey harrison
6
0.18%
1
1.37%
peter hurley
peter hurley
3
0.09%
1
1.37%
nishanth aravamudan
nishanth aravamudan
1
0.03%
1
1.37%
marton nemeth
marton nemeth
1
0.03%
1
1.37%
Total
3252
100.00%
73
100.00%
  
Directory: drivers/usb/serial

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.