Release 4.7 drivers/usb/storage/usb.c

/*
 * Driver for USB Mass Storage compliant devices
 *
 * Current development and maintenance by:
 *   (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
 *
 * Developed with the assistance of:
 *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
 *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
 *
 * Initial work by:
 *   (c) 1999 Michael Gee (michael@linuxspecific.com)
 *
 * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
 *   (c) 2000 Yggdrasil Computing, Inc.
 *
 * This driver is based on the 'USB Mass Storage Class' document. This
 * describes in detail the protocol used to communicate with such
 * devices.  Clearly, the designers had SCSI and ATAPI commands in
 * mind when they created this document.  The commands are all very
 * similar to commands in the SCSI-II and ATAPI specifications.
 *
 * It is important to note that in a number of cases this class
 * exhibits class-specific exemptions from the USB specification.
 * Notably the usage of NAK, STALL and ACK differs from the norm, in
 * that they are used to communicate wait, failed and OK on commands.
 *
 * Also, for certain devices, the interrupt endpoint is used to convey
 * status of a command.
 *
 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
 * information about this driver.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifdef CONFIG_USB_STORAGE_DEBUG

#define DEBUG
#endif

#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/utsname.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>

#include "usb.h"
#include "scsiglue.h"
#include "transport.h"
#include "protocol.h"
#include "debug.h"
#include "initializers.h"

#include "sierra_ms.h"
#include "option_ms.h"

#if IS_ENABLED(CONFIG_USB_UAS)
#include "uas-detect.h"
#endif


#define DRV_NAME "usb-storage"

/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
MODULE_LICENSE("GPL");


static unsigned int delay_use = 1;
module_param(delay_use, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");


static char quirks[128];
module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");


/*
 * The entries in this table correspond, line for line,
 * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
 */

/*
 *The vendor name should be kept at eight characters or less, and
 * the product name should be kept at 16 characters or less. If a device
 * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
 * normally generated by a device through the INQUIRY response will be
 * taken from this list, and this is the reason for the above size
 * restriction. However, if the flag is not present, then you
 * are free to use as many characters as you like.
 */


#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
		    vendor_name, product_name, use_protocol, use_transport, \
		    init_function, Flags) \
{ \
        .vendorName = vendor_name,      \
        .productName = product_name,    \
        .useProtocol = use_protocol,    \
        .useTransport = use_transport,  \
        .initFunction = init_function,  \
}


#define COMPLIANT_DEV	UNUSUAL_DEV


#define USUAL_DEV(use_protocol, use_transport) \
{ \
        .useProtocol = use_protocol,    \
        .useTransport = use_transport,  \
}


#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
		vendor_name, product_name, use_protocol, use_transport, \
		init_function, Flags) \
{ \
        .vendorName = vendor_name,      \
        .productName = product_name,    \
        .useProtocol = use_protocol,    \
        .useTransport = use_transport,  \
        .initFunction = init_function,  \
}


static struct us_unusual_dev us_unusual_dev_list[] = {
#	include "unusual_devs.h"
	{ }		/* Terminating entry */
};


static struct us_unusual_dev for_dynamic_ids =
		USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);


#undef UNUSUAL_DEV

#undef COMPLIANT_DEV

#undef USUAL_DEV

#undef UNUSUAL_VENDOR_INTF

#ifdef CONFIG_LOCKDEP


static struct lock_class_key us_interface_key[USB_MAXINTERFACES];



static void us_set_lock_class(struct mutex *mutex,
		struct usb_interface *intf)
{
	struct usb_device *udev = interface_to_usbdev(intf);
	struct usb_host_config *config = udev->actconfig;
	int i;

	for (i = 0; i < config->desc.bNumInterfaces; i++) {
		if (config->interface[i] == intf)
			break;
	}

	BUG_ON(i == config->desc.bNumInterfaces);

	lockdep_set_class(mutex, &us_interface_key[i]);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
lei ming
lei ming
91
100.00%
1
100.00%
Total
91
100.00%
1
100.00%

#else



static void us_set_lock_class(struct mutex *mutex,
		struct usb_interface *intf)
{
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
lei ming
lei ming
15
100.00%
1
100.00%
Total
15
100.00%
1
100.00%

#endif

#ifdef CONFIG_PM	/* Minimal support for suspend and resume */



int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
{
	struct us_data *us = usb_get_intfdata(iface);

	/* Wait until no command is running */
	mutex_lock(&us->dev_mutex);

	if (us->suspend_resume_hook)
		(us->suspend_resume_hook)(us, US_SUSPEND);

	/*
         * When runtime PM is working, we'll set a flag to indicate
         * whether we should autoresume when a SCSI request arrives.
         */

	mutex_unlock(&us->dev_mutex);
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
37
60.66%
2
28.57%
matthew dharm
matthew dharm
17
27.87%
1
14.29%
arjan van de ven
arjan van de ven
4
6.56%
1
14.29%
pre-git
pre-git
1
1.64%
1
14.29%
felipe balbi
felipe balbi
1
1.64%
1
14.29%
linus torvalds
linus torvalds
1
1.64%
1
14.29%
Total
61
100.00%
7
100.00%


EXPORT_SYMBOL_GPL(usb_stor_suspend);



int usb_stor_resume(struct usb_interface *iface)
{
	struct us_data *us = usb_get_intfdata(iface);

	mutex_lock(&us->dev_mutex);

	if (us->suspend_resume_hook)
		(us->suspend_resume_hook)(us, US_RESUME);

	mutex_unlock(&us->dev_mutex);
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
23
41.07%
2
50.00%
matthew dharm
matthew dharm
17
30.36%
1
25.00%
greg kroah-hartman
greg kroah-hartman
16
28.57%
1
25.00%
Total
56
100.00%
4
100.00%


EXPORT_SYMBOL_GPL(usb_stor_resume);



int usb_stor_reset_resume(struct usb_interface *iface)
{
	struct us_data *us = usb_get_intfdata(iface);

	/* Report the reset to the SCSI core */
	usb_stor_report_bus_reset(us);

	/*
         * FIXME: Notify the subdrivers that they need to reinitialize
         * the device
         */
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
29
96.67%
2
66.67%
felipe balbi
felipe balbi
1
3.33%
1
33.33%
Total
30
100.00%
3
100.00%


EXPORT_SYMBOL_GPL(usb_stor_reset_resume);

#endif /* CONFIG_PM */

/*
 * The next two routines get called just before and just after
 * a USB port reset, whether from this driver or a different one.
 */



int usb_stor_pre_reset(struct usb_interface *iface)
{
	struct us_data *us = usb_get_intfdata(iface);

	/* Make sure no command runs during the reset */
	mutex_lock(&us->dev_mutex);
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
32
100.00%
3
100.00%
Total
32
100.00%
3
100.00%


EXPORT_SYMBOL_GPL(usb_stor_pre_reset);



int usb_stor_post_reset(struct usb_interface *iface)
{
	struct us_data *us = usb_get_intfdata(iface);

	/* Report the reset to the SCSI core */
	usb_stor_report_bus_reset(us);

	/*
         * FIXME: Notify the subdrivers that they need to reinitialize
         * the device
         */

	mutex_unlock(&us->dev_mutex);
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
37
97.37%
3
75.00%
felipe balbi
felipe balbi
1
2.63%
1
25.00%
Total
38
100.00%
4
100.00%


EXPORT_SYMBOL_GPL(usb_stor_post_reset);

/*
 * fill_inquiry_response takes an unsigned char array (which must
 * be at least 36 characters) and populates the vendor name,
 * product name, and revision fields. Then the array is copied
 * into the SCSI command's response buffer (oddly enough
 * called request_buffer). data_len contains the length of the
 * data array, which again must be at least 36.
 */



void fill_inquiry_response(struct us_data *us, unsigned char *data,
		unsigned int data_len)
{
	if (data_len < 36) /* You lose. */
		return;

	memset(data+8, ' ', 28);
	if (data[0]&0x20) { /*
                             * USB device currently not connected. Return
                             * peripheral qualifier 001b ("...however, the
                             * physical device is not currently connected
                             * to this logical unit") and leave vendor and
                             * product identification empty. ("If the target
                             * does store some of the INQUIRY data on the
                             * device, it may return zeros or ASCII spaces
                             * (20h) in those fields until the data is
                             * available from the device.").
                             */
	} else {
		u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
		int n;

		n = strlen(us->unusual_dev->vendorName);
		memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
		n = strlen(us->unusual_dev->productName);
		memcpy(data+16, us->unusual_dev->productName, min(16, n));

		data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
		data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
		data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
		data[35] = 0x30 + ((bcdDevice) & 0x0F);
	}

	usb_stor_set_xfer_buf(data, data_len, us->srb);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
linus torvalds
linus torvalds
150
71.77%
2
18.18%
alan stern
alan stern
40
19.14%
3
27.27%
greg kroah-hartman
greg kroah-hartman
14
6.70%
1
9.09%
pre-git
pre-git
2
0.96%
2
18.18%
felipe balbi
felipe balbi
1
0.48%
1
9.09%
jens axboe
jens axboe
1
0.48%
1
9.09%
jeffrin jose
jeffrin jose
1
0.48%
1
9.09%
Total
209
100.00%
11
100.00%


EXPORT_SYMBOL_GPL(fill_inquiry_response);



static int usb_stor_control_thread(void * __us)
{
	struct us_data *us = (struct us_data *)__us;
	struct Scsi_Host *host = us_to_host(us);

	for (;;) {
		usb_stor_dbg(us, "*** thread sleeping\n");
		if (wait_for_completion_interruptible(&us->cmnd_ready))
			break;

		usb_stor_dbg(us, "*** thread awakened\n");

		/* lock the device pointers */
		mutex_lock(&(us->dev_mutex));

		/* lock access to the state */
		scsi_lock(host);

		/* When we are called with no command pending, we're done */
		if (us->srb == NULL) {
			scsi_unlock(host);
			mutex_unlock(&us->dev_mutex);
			usb_stor_dbg(us, "-- exiting\n");
			break;
		}

		/* has the command timed out *already* ? */
		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
			us->srb->result = DID_ABORT << 16;
			goto SkipForAbort;
		}

		scsi_unlock(host);

		/*
                 * reject the command if the direction indicator
                 * is UNKNOWN
                 */
		if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
			usb_stor_dbg(us, "UNKNOWN data direction\n");
			us->srb->result = DID_ERROR << 16;
		}

		/*
                 * reject if target != 0 or if LUN is higher than
                 * the maximum known LUN
                 */
		else if (us->srb->device->id &&
				!(us->fflags & US_FL_SCM_MULT_TARG)) {
			usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
				     us->srb->device->id,
				     us->srb->device->lun);
			us->srb->result = DID_BAD_TARGET << 16;
		}

		else if (us->srb->device->lun > us->max_lun) {
			usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
				     us->srb->device->id,
				     us->srb->device->lun);
			us->srb->result = DID_BAD_TARGET << 16;
		}

		/*
                 * Handle those devices which need us to fake
                 * their inquiry data
                 */
		else if ((us->srb->cmnd[0] == INQUIRY) &&
			    (us->fflags & US_FL_FIX_INQUIRY)) {
			unsigned char data_ptr[36] = {
			    0x00, 0x80, 0x02, 0x02,
			    0x1F, 0x00, 0x00, 0x00};

			usb_stor_dbg(us, "Faking INQUIRY command\n");
			fill_inquiry_response(us, data_ptr, 36);
			us->srb->result = SAM_STAT_GOOD;
		}

		/* we've got a command, let's do it! */
		else {
			US_DEBUG(usb_stor_show_command(us, us->srb));
			us->proto_handler(us->srb, us);
			usb_mark_last_busy(us->pusb_dev);
		}

		/* lock access to the state */
		scsi_lock(host);

		/* indicate that the command is done */
		if (us->srb->result != DID_ABORT << 16) {
			usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
				     us->srb->result);
			us->srb->scsi_done(us->srb);
		} else {
SkipForAbort:
			usb_stor_dbg(us, "scsi command aborted\n");
		}

		/*
                 * If an abort request was received we need to signal that
                 * the abort has finished.  The proper test for this is
                 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
                 * the timeout might have occurred after the command had
                 * already completed with a different result code.
                 */
		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
			complete(&(us->notify));

			/* Allow USB transfers to resume */
			clear_bit(US_FLIDX_ABORTING, &us->dflags);
			clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
		}

		/* finished working on this command */
		us->srb = NULL;
		scsi_unlock(host);

		/* unlock the device pointers */
		mutex_unlock(&us->dev_mutex);
	} /* for (;;) */

	/* Wait until we are told to stop */
	for (;;) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (kthread_should_stop())
			break;
		schedule();
	}
	__set_current_state(TASK_RUNNING);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
linus torvalds
linus torvalds
286
52.29%
3
10.00%
matthew dharm
matthew dharm
124
22.67%
11
36.67%
alan stern
alan stern
54
9.87%
5
16.67%
joe perches
joe perches
31
5.67%
1
3.33%
pre-git
pre-git
20
3.66%
5
16.67%
luben tuikov
luben tuikov
15
2.74%
1
3.33%
arjan van de ven
arjan van de ven
6
1.10%
1
3.33%
manfred spraul
manfred spraul
5
0.91%
1
3.33%
felipe balbi
felipe balbi
4
0.73%
1
3.33%
hannes reinecke
hannes reinecke
2
0.37%
1
3.33%
Total
547
100.00%
30
100.00%

/***********************************************************************
 * Device probing and disconnecting
 ***********************************************************************/

/* Associate our private data with the USB device */


static int associate_dev(struct us_data *us, struct usb_interface *intf)
{
	/* Fill in the device-related fields */
	us->pusb_dev = interface_to_usbdev(intf);
	us->pusb_intf = intf;
	us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
	usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
		     le16_to_cpu(us->pusb_dev->descriptor.idVendor),
		     le16_to_cpu(us->pusb_dev->descriptor.idProduct),
		     le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
	usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
		     intf->cur_altsetting->desc.bInterfaceSubClass,
		     intf->cur_altsetting->desc.bInterfaceProtocol);

	/* Store our private data in the interface */
	usb_set_intfdata(intf, us);

	/* Allocate the control/setup and DMA-mapped buffers */
	us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
	if (!us->cr)
		return -ENOMEM;

	us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
			GFP_KERNEL, &us->iobuf_dma);
	if (!us->iobuf) {
		usb_stor_dbg(us, "I/O buffer allocation failed\n");
		return -ENOMEM;
	}
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
165
88.24%
4
44.44%
joe perches
joe perches
9
4.81%
1
11.11%
greg kroah-hartman
greg kroah-hartman
9
4.81%
1
11.11%
alan stern
alan stern
3
1.60%
2
22.22%
daniel mack
daniel mack
1
0.53%
1
11.11%
Total
187
100.00%
9
100.00%

/* Works only for digits and letters, but small and fast */

#define TOLOWER(x) ((x) | 0x20)

/* Adjust device flags based on the "quirks=" module parameter */


void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
{
	char *p;
	u16 vid = le16_to_cpu(udev->descriptor.idVendor);
	u16 pid = le16_to_cpu(udev->descriptor.idProduct);
	unsigned f = 0;
	unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
			US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
			US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
			US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
			US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
			US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS);

	p = quirks;
	while (*p) {
		/* Each entry consists of VID:PID:flags */
		if (vid == simple_strtoul(p, &p, 16) &&
				*p == ':' &&
				pid == simple_strtoul(p+1, &p, 16) &&
				*p == ':')
			break;

		/* Move forward to the next entry */
		while (*p) {
			if (*p++ == ',')
				break;
		}
	}
	if (!*p)	/* No match */
		return;

	/* Collect the flags */
	while (*++p && *p != ',') {
		switch (TOLOWER(*p)) {
		case 'a':
			f |= US_FL_SANE_SENSE;
			break;
		case 'b':
			f |= US_FL_BAD_SENSE;
			break;
		case 'c':
			f |= US_FL_FIX_CAPACITY;
			break;
		case 'd':
			f |= US_FL_NO_READ_DISC_INFO;
			break;
		case 'e':
			f |= US_FL_NO_READ_CAPACITY_16;
			break;
		case 'f':
			f |= US_FL_NO_REPORT_OPCODES;
			break;
		case 'g':
			f |= US_FL_MAX_SECTORS_240;
			break;
		case 'h':
			f |= US_FL_CAPACITY_HEURISTICS;
			break;
		case 'i':
			f |= US_FL_IGNORE_DEVICE;
			break;
		case 'j':
			f |= US_FL_NO_REPORT_LUNS;
			break;
		case 'l':
			f |= US_FL_NOT_LOCKABLE;
			break;
		case 'm':
			f |= US_FL_MAX_SECTORS_64;
			break;
		case 'n':
			f |= US_FL_INITIAL_READ10;
			break;
		case 'o':
			f |= US_FL_CAPACITY_OK;
			break;
		case 'p':
			f |= US_FL_WRITE_CACHE;
			break;
		case 'r':
			f |= US_FL_IGNORE_RESIDUE;
			break;
		case 's':
			f |= US_FL_SINGLE_LUN;
			break;
		case 't':
			f |= US_FL_NO_ATA_1X;
			break;
		case 'u':
			f |= US_FL_IGNORE_UAS;
			break;
		case 'w':
			f |= US_FL_NO_WP_DETECT;
			break;
		/* Ignore unrecognized flag characters */
		}
	}
	*fflags = (*fflags & ~mask) | f;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
275
74.73%
5
38.46%
hans de goede
hans de goede
62
16.85%
5
38.46%
karl relton
karl relton
20
5.43%
1
7.69%
namjae jeon
namjae jeon
10
2.72%
1
7.69%
pete zaitcev
pete zaitcev
1
0.27%
1
7.69%
Total
368
100.00%
13
100.00%


EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);

/* Get the unusual_devs entries and the string descriptors */


static int get_device_info(struct us_data *us, const struct usb_device_id *id,
		struct us_unusual_dev *unusual_dev)
{
	struct usb_device *dev = us->pusb_dev;
	struct usb_interface_descriptor *idesc =
		&us->pusb_intf->cur_altsetting->desc;
	struct device *pdev = &us->pusb_intf->dev;

	/* Store the entries */
	us->unusual_dev = unusual_dev;
	us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
			idesc->bInterfaceSubClass :
			unusual_dev->useProtocol;
	us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
			idesc->bInterfaceProtocol :
			unusual_dev->useTransport;
	us->fflags = id->driver_info;
	usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);

	if (us->fflags & US_FL_IGNORE_DEVICE) {
		dev_info(pdev, "device ignored\n");
		return -ENODEV;
	}

	/*
         * This flag is only needed when we're in high-speed, so let's
         * disable it if we're in full-speed
         */
	if (dev->speed != USB_SPEED_HIGH)
		us->fflags &= ~US_FL_GO_SLOW;

	if (us->fflags)
		dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
				le16_to_cpu(dev->descriptor.idVendor),
				le16_to_cpu(dev->descriptor.idProduct),
				us->fflags);

	/*
         * Log a message if a non-generic unusual_dev entry contains an
         * unnecessary subclass or protocol override.  This may stimulate
         * reports from users that will help us remove unneeded entries
         * from the unusual_devs.h table.
         */
	if (id->idVendor || id->idProduct) {
		static const char *msgs[3] = {
			"an unneeded SubClass entry",
			"an unneeded Protocol entry",
			"unneeded SubClass and Protocol entries"};
		struct usb_device_descriptor *ddesc = &dev->descriptor;
		int msg = -1;

		if (unusual_dev->useProtocol != USB_SC_DEVICE &&
			us->subclass == idesc->bInterfaceSubClass)
			msg += 1;
		if (unusual_dev->useTransport != USB_PR_DEVICE &&
			us->protocol == idesc->bInterfaceProtocol)
			msg += 2;
		if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
			dev_notice(pdev, "This device "
					"(%04x,%04x,%04x S %02x P %02x)"
					" has %s in unusual_devs.h (kernel"
					" %s)\n"
					"   Please send a copy of this message to "
					"<linux-usb@vger.kernel.org> and "
					"<usb-storage@lists.one-eyed-alien.net>\n",
					le16_to_cpu(ddesc->idVendor),
					le16_to_cpu(ddesc->idProduct),
					le16_to_cpu(ddesc->bcdDevice),
					idesc->bInterfaceSubClass,
					idesc->bInterfaceProtocol,
					msgs[msg],
					utsname()->release);
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
182
51.70%
9
36.00%
felipe contreras
felipe contreras
87
24.72%
2
8.00%
daniel drake
daniel drake
20
5.68%
1
4.00%
phil dibowitz
phil dibowitz
18
5.11%
2
8.00%
alan stern
alan stern
14
3.98%
4
16.00%
pete zaitcev
pete zaitcev
8
2.27%
1
4.00%
hans de goede
hans de goede
8
2.27%
1
4.00%
pre-git
pre-git
7
1.99%
1
4.00%
michal nazarewicz
michal nazarewicz
4
1.14%
1
4.00%
andrew lunn
andrew lunn
2
0.57%
1
4.00%
arjan van de ven
arjan van de ven
1
0.28%
1
4.00%
felipe balbi
felipe balbi
1
0.28%
1
4.00%
Total
352
100.00%
25
100.00%

/* Get the transport settings */


static void get_transport(struct us_data *us)
{
	switch (us->protocol) {
	case USB_PR_CB:
		us->transport_name = "Control/Bulk";
		us->transport = usb_stor_CB_transport;
		us->transport_reset = usb_stor_CB_reset;
		us->max_lun = 7;
		break;

	case USB_PR_CBI:
		us->transport_name = "Control/Bulk/Interrupt";
		us->transport = usb_stor_CB_transport;
		us->transport_reset = usb_stor_CB_reset;
		us->max_lun = 7;
		break;

	case USB_PR_BULK:
		us->transport_name = "Bulk";
		us->transport = usb_stor_Bulk_transport;
		us->transport_reset = usb_stor_Bulk_reset;
		break;
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
91
93.81%
5
55.56%
michal nazarewicz
michal nazarewicz
3
3.09%
1
11.11%
alan stern
alan stern
2
2.06%
2
22.22%
greg kroah-hartman
greg kroah-hartman
1
1.03%
1
11.11%
Total
97
100.00%
9
100.00%

/* Get the protocol settings */


static void get_protocol(struct us_data *us)
{
	switch (us->subclass) {
	case USB_SC_RBC:
		us->protocol_name = "Reduced Block Commands (RBC)";
		us->proto_handler = usb_stor_transparent_scsi_command;
		break;

	case USB_SC_8020:
		us->protocol_name = "8020i";
		us->proto_handler = usb_stor_pad12_command;
		us->max_lun = 0;
		break;

	case USB_SC_QIC:
		us->protocol_name = "QIC-157";
		us->proto_handler = usb_stor_pad12_command;
		us->max_lun = 0;
		break;

	case USB_SC_8070:
		us->protocol_name = "8070i";
		us->proto_handler = usb_stor_pad12_command;
		us->max_lun = 0;
		break;

	case USB_SC_SCSI:
		us->protocol_name = "Transparent SCSI";
		us->proto_handler = usb_stor_transparent_scsi_command;
		break;

	case USB_SC_UFI:
		us->protocol_name = "Uniform Floppy Interface (UFI)";
		us->proto_handler = usb_stor_ufi_command;
		break;
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
115
86.47%
1
16.67%
michal nazarewicz
michal nazarewicz
6
4.51%
1
16.67%
linus torvalds
linus torvalds
5
3.76%
1
16.67%
alan stern
alan stern
4
3.01%
2
33.33%
pre-git
pre-git
3
2.26%
1
16.67%
Total
133
100.00%
6
100.00%

/* Get the pipe settings */


static int get_pipes(struct us_data *us)
{
	struct usb_host_interface *altsetting =
		us->pusb_intf->cur_altsetting;
	int i;
	struct usb_endpoint_descriptor *ep;
	struct usb_endpoint_descriptor *ep_in = NULL;
	struct usb_endpoint_descriptor *ep_out = NULL;
	struct usb_endpoint_descriptor *ep_int = NULL;

	/*
         * Find the first endpoint of each type we need.
         * We are expecting a minimum of 2 endpoints - in and out (bulk).
         * An optional interrupt-in is OK (necessary for CBI protocol).
         * We will ignore any others.
         */
	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
		ep = &altsetting->endpoint[i].desc;

		if (usb_endpoint_xfer_bulk(ep)) {
			if (usb_endpoint_dir_in(ep)) {
				if (!ep_in)
					ep_in = ep;
			} else {
				if (!ep_out)
					ep_out = ep;
			}
		}

		else if (usb_endpoint_is_int_in(ep)) {
			if (!ep_int)
				ep_int = ep;
		}
	}

	if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
		usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n");
		return -EIO;
	}

	/* Calculate and store the pipe values */
	us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
	us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
	us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
		usb_endpoint_num(ep_out));
	us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
		usb_endpoint_num(ep_in));
	if (ep_int) {
		us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
			usb_endpoint_num(ep_int));
		us->ep_bInterval = ep_int->bInterval;
	}
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
145
54.72%
4
28.57%
pre-git
pre-git
62
23.40%
2
14.29%
alan stern
alan stern
29
10.94%
3
21.43%
julia lawall
julia lawall
9
3.40%
1
7.14%
luiz fernando capitulino
luiz fernando capitulino
8
3.02%
1
7.14%
david brownell
david brownell
8
3.02%
1
7.14%
joe perches
joe perches
3
1.13%
1
7.14%
michal nazarewicz
michal nazarewicz
1
0.38%
1
7.14%
Total
265
100.00%
14
100.00%

/* Initialize all the dynamic resources we need */


static int usb_stor_acquire_resources(struct us_data *us)
{
	int p;
	struct task_struct *th;

	us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!us->current_urb) {
		usb_stor_dbg(us, "URB allocation failed\n");
		return -ENOMEM;
	}

	/*
         * Just before we start our control thread, initialize
         * the device if it needs initialization
         */
	if (us->unusual_dev->initFunction) {
		p = us->unusual_dev->initFunction(us);
		if (p)
			return p;
	}

	/* Start up our control thread */
	th = kthread_run(usb_stor_control_thread, us, "usb-storage");
	if (IS_ERR(th)) {
		dev_warn(&us->pusb_intf->dev,
				"Unable to start control thread\n");
		return PTR_ERR(th);
	}
	us->ctl_thread = th;

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
72
56.69%
6
40.00%
alan stern
alan stern
28
22.05%
3
20.00%
pre-git
pre-git
14
11.02%
3
20.00%
felipe contreras
felipe contreras
9
7.09%
1
6.67%
joe perches
joe perches
3
2.36%
1
6.67%
felipe balbi
felipe balbi
1
0.79%
1
6.67%
Total
127
100.00%
15
100.00%

/* Release all our dynamic resources */


static void usb_stor_release_resources(struct us_data *us)
{
	/*
         * Tell the control thread to exit.  The SCSI host must
         * already have been removed and the DISCONNECTING flag set
         * so that we won't accept any more commands.
         */
	usb_stor_dbg(us, "-- sending exit command to thread\n");
	complete(&us->cmnd_ready);
	if (us->ctl_thread)
		kthread_stop(us->ctl_thread);

	/* Call the destructor routine, if it exists */
	if (us->extra_destructor) {
		usb_stor_dbg(us, "-- calling extra_destructor()\n");
		us->extra_destructor(us->extra);
	}

	/* Free the extra data and the URB */
	kfree(us->extra);
	usb_free_urb(us->current_urb);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
42
52.50%
4
36.36%
alan stern
alan stern
15
18.75%
2
18.18%
linus torvalds
linus torvalds
8
10.00%
1
9.09%
pre-git
pre-git
7
8.75%
1
9.09%
joe perches
joe perches
6
7.50%
1
9.09%
felipe balbi
felipe balbi
1
1.25%
1
9.09%
adrian bunk
adrian bunk
1
1.25%
1
9.09%
Total
80
100.00%
11
100.00%

/* Dissociate from the USB device */


static void dissociate_dev(struct us_data *us)
{
	/* Free the buffers */
	kfree(us->cr);
	usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);

	/* Remove our private data from the interface */
	usb_set_intfdata(us->pusb_intf, NULL);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
42
91.30%
2
40.00%
alan stern
alan stern
2
4.35%
1
20.00%
pre-git
pre-git
1
2.17%
1
20.00%
daniel mack
daniel mack
1
2.17%
1
20.00%
Total
46
100.00%
5
100.00%

/*
 * First stage of disconnect processing: stop SCSI scanning,
 * remove the host, and stop accepting new commands
 */


static void quiesce_and_remove_host(struct us_data *us)
{
	struct Scsi_Host *host = us_to_host(us);

	/* If the device is really gone, cut short reset delays */
	if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
		set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
		wake_up(&us->delay_wait);
	}

	/*
         * Prevent SCSI scanning (if it hasn't started yet)
         * or wait for the SCSI-scanning routine to stop.
         */
	cancel_delayed_work_sync(&us->scan_dwork);

	/* Balance autopm calls if scanning was cancelled */
	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
		usb_autopm_put_interface_no_suspend(us->pusb_intf);

	/*
         * Removing the host will perform an orderly shutdown: caches
         * synchronized, disks spun down, etc.
         */
	scsi_remove_host(host);

	/*
         * Prevent any new commands from being accepted and cut short
         * reset delays.
         */
	scsi_lock(host);
	set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
	scsi_unlock(host);
	wake_up(&us->delay_wait);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
66
56.90%
5
62.50%
matthew dharm
matthew dharm
47
40.52%
2
25.00%
felipe balbi
felipe balbi
3
2.59%
1
12.50%
Total
116
100.00%
8
100.00%

/* Second stage of disconnect processing: deallocate all resources */


static void release_everything(struct us_data *us)
{
	usb_stor_release_resources(us);
	dissociate_dev(us);

	/*
         * Drop our reference to the host; the SCSI core will free it
         * (and "us" along with it) when the refcount becomes 0.
         */
	scsi_host_put(us_to_host(us));
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
29
96.67%
1
50.00%
felipe balbi
felipe balbi
1
3.33%
1
50.00%
Total
30
100.00%
2
100.00%

/* Delayed-work routine to carry out SCSI-device scanning */


static void usb_stor_scan_dwork(struct work_struct *work)
{
	struct us_data *us = container_of(work, struct us_data,
			scan_dwork.work);
	struct device *dev = &us->pusb_intf->dev;

	dev_dbg(dev, "starting scan\n");

	/* For bulk-only devices, determine the max LUN value */
	if (us->protocol == USB_PR_BULK &&
	    !(us->fflags & US_FL_SINGLE_LUN) &&
	    !(us->fflags & US_FL_SCM_MULT_TARG)) {
		mutex_lock(&us->dev_mutex);
		us->max_lun = usb_stor_Bulk_max_lun(us);
		/*
                 * Allow proper scanning of devices that present more than 8 LUNs
                 * While not affecting other devices that may need the previous
                 * behavior
                 */
		if (us->max_lun >= 8)
			us_to_host(us)->max_lun = us->max_lun+1;
		mutex_unlock(&us->dev_mutex);
	}
	scsi_scan_host(us_to_host(us));
	dev_dbg(dev, "scan complete\n");

	/* Should we unbind if no devices were detected? */

	usb_autopm_put_interface(us->pusb_intf);
	clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
68
43.59%
5
33.33%
matthew dharm
matthew dharm
35
22.44%
3
20.00%
oliver neukum
oliver neukum
21
13.46%
1
6.67%
mark knibbs
mark knibbs
9
5.77%
1
6.67%
felipe contreras
felipe contreras
9
5.77%
1
6.67%
matthew wilcox
matthew wilcox
8
5.13%
1
6.67%
arjan van de ven
arjan van de ven
4
2.56%
1
6.67%
felipe balbi
felipe balbi
1
0.64%
1
6.67%
michal nazarewicz
michal nazarewicz
1
0.64%
1
6.67%
Total
156
100.00%
15
100.00%



static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
{
	struct usb_device *usb_dev = interface_to_usbdev(intf);

	if (usb_dev->bus->sg_tablesize) {
		return usb_dev->bus->sg_tablesize;
	}
	return SG_ALL;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
david vrabel
david vrabel
42
100.00%
1
100.00%
Total
42
100.00%
1
100.00%

/* First part of general USB mass-storage probing */


int usb_stor_probe1(struct us_data **pus,
		struct usb_interface *intf,
		const struct usb_device_id *id,
		struct us_unusual_dev *unusual_dev,
		struct scsi_host_template *sht)
{
	struct Scsi_Host *host;
	struct us_data *us;
	int result;

	dev_info(&intf->dev, "USB Mass Storage device detected\n");

	/*
         * Ask the SCSI layer to allocate a host structure, with extra
         * space at the end for our private us_data structure.
         */
	host = scsi_host_alloc(sht, sizeof(*us));
	if (!host) {
		dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
		return -ENOMEM;
	}

	/*
         * Allow 16-byte CDBs and thus > 2TB
         */
	host->max_cmd_len = 16;
	host->sg_tablesize = usb_stor_sg_tablesize(intf);
	*pus = us = host_to_us(host);
	mutex_init(&(us->dev_mutex));
	us_set_lock_class(&us->dev_mutex, intf);
	init_completion(&us->cmnd_ready);
	init_completion(&(us->notify));
	init_waitqueue_head(&us->delay_wait);
	INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);

	/* Associate the us_data structure with the USB device */
	result = associate_dev(us, intf);
	if (result)
		goto BadDevice;

	/* Get the unusual_devs entries and the descriptors */
	result = get_device_info(us, id, unusual_dev);
	if (result)
		goto BadDevice;

	/* Get standard transport and protocol settings */
	get_transport(us);
	get_protocol(us);

	/*
         * Give the caller a chance to fill in specialized transport
         * or protocol settings.
         */
	return 0;

BadDevice:
	usb_stor_dbg(us, "storage_probe() failed\n");
	release_everything(us);
	return result;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
112
46.67%
9
34.62%
alan stern
alan stern
54
22.50%
4
15.38%
pre-git
pre-git
13
5.42%
3
11.54%
lei ming
lei ming
10
4.17%
1
3.85%
david vrabel
david vrabel
9
3.75%
1
3.85%
daniel drake
daniel drake
9
3.75%
1
3.85%
joe perches
joe perches
9
3.75%
1
3.85%
richard sharpe
richard sharpe
7
2.92%
1
3.85%
felipe contreras
felipe contreras
7
2.92%
1
3.85%
akinobu mita
akinobu mita
6
2.50%
1
3.85%
arjan van de ven
arjan van de ven
2
0.83%
1
3.85%
pete zaitcev
pete zaitcev
1
0.42%
1
3.85%
felipe balbi
felipe balbi
1
0.42%
1
3.85%
Total
240
100.00%
26
100.00%


EXPORT_SYMBOL_GPL(usb_stor_probe1);

/* Second part of general USB mass-storage probing */


int usb_stor_probe2(struct us_data *us)
{
	int result;
	struct device *dev = &us->pusb_intf->dev;

	/* Make sure the transport and protocol have both been set */
	if (!us->transport || !us->proto_handler) {
		result = -ENXIO;
		goto BadDevice;
	}
	usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
	usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);

	if (us->fflags & US_FL_SCM_MULT_TARG) {
		/*
                 * SCM eUSCSI bridge devices can have different numbers
                 * of LUNs on different targets; allow all to be probed.
                 */
		us->max_lun = 7;
		/* The eUSCSI itself has ID 7, so avoid scanning that */
		us_to_host(us)->this_id = 7;
		/* max_id is 8 initially, so no need to set it here */
	} else {
		/* In the normal case there is only a single target */
		us_to_host(us)->max_id = 1;
		/*
                 * Like Windows, we won't store the LUN bits in CDB[1] for
                 * SCSI-2 devices using the Bulk-Only transport (even though
                 * this violates the SCSI spec).
                 */
		if (us->transport == usb_stor_Bulk_transport)
			us_to_host(us)->no_scsi2_lun_in_cdb = 1;
	}

	/* fix for single-lun devices */
	if (us->fflags & US_FL_SINGLE_LUN)
		us->max_lun = 0;

	/* Find the endpoints and calculate pipe values */
	result = get_pipes(us);
	if (result)
		goto BadDevice;

	/*
         * If the device returns invalid data for the first READ(10)
         * command, indicate the command should be retried.
         */
	if (us->fflags & US_FL_INITIAL_READ10)
		set_bit(US_FLIDX_REDO_READ10, &us->dflags);

	/* Acquire all the other resources and add the host */
	result = usb_stor_acquire_resources(us);
	if (result)
		goto BadDevice;
	snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
					dev_name(&us->pusb_intf->dev));
	result = scsi_add_host(us_to_host(us), dev);
	if (result) {
		dev_warn(dev,
				"Unable to add the scsi host\n");
		goto BadDevice;
	}

	/* Submit the delayed_work for SCSI-device scanning */
	usb_autopm_get_interface_no_resume(us->pusb_intf);
	set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);

	if (delay_use > 0)
		dev_dbg(dev, "waiting for device to settle before scanning\n");
	queue_delayed_work(system_freezable_wq, &us->scan_dwork,
			delay_use * HZ);
	return 0;

	/* We come here if there are any problems */
BadDevice:
	usb_stor_dbg(us, "storage_probe() failed\n");
	release_everything(us);
	return result;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
126
40.26%
7
28.00%
matthew dharm
matthew dharm
74
23.64%
8
32.00%
mark knibbs
mark knibbs
34
10.86%
1
4.00%
matthew wilcox
matthew wilcox
26
8.31%
1
4.00%
felipe contreras
felipe contreras
17
5.43%
1
4.00%
ming lei
ming lei
11
3.51%
1
4.00%
joe perches
joe perches
9
2.88%
1
4.00%
pre-git
pre-git
9
2.88%
2
8.00%
christoph hellwig
christoph hellwig
5
1.60%
2
8.00%
greg kroah-hartman
greg kroah-hartman
2
0.64%
1
4.00%
Total
313
100.00%
25
100.00%


EXPORT_SYMBOL_GPL(usb_stor_probe2);

/* Handle a USB mass-storage disconnect */


void usb_stor_disconnect(struct usb_interface *intf)
{
	struct us_data *us = usb_get_intfdata(intf);

	quiesce_and_remove_host(us);
	release_everything(us);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
16
53.33%
5
62.50%
pre-git
pre-git
11
36.67%
1
12.50%
greg kroah-hartman
greg kroah-hartman
2
6.67%
1
12.50%
alan stern
alan stern
1
3.33%
1
12.50%
Total
30
100.00%
8
100.00%


EXPORT_SYMBOL_GPL(usb_stor_disconnect);


static struct scsi_host_template usb_stor_host_template;

/* The main probe routine for standard devices */


static int storage_probe(struct usb_interface *intf,
			 const struct usb_device_id *id)
{
	struct us_unusual_dev *unusual_dev;
	struct us_data *us;
	int result;
	int size;

	/* If uas is enabled and this device can do uas then ignore it. */
#if IS_ENABLED(CONFIG_USB_UAS)
	if (uas_use_uas_driver(intf, id, NULL))
		return -ENXIO;
#endif

	/*
         * If the device isn't standard (is handled by a subdriver
         * module) then don't accept it.
         */
	if (usb_usual_ignore_device(intf))
		return -ENXIO;

	/*
         * Call the general probe procedures.
         *
         * The unusual_dev_list array is parallel to the usb_storage_usb_ids
         * table, so we use the index of the id entry to find the
         * corresponding unusual_devs entry.
         */

	size = ARRAY_SIZE(us_unusual_dev_list);
	if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
		unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
	} else {
		unusual_dev = &for_dynamic_ids;

		dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
			id->idVendor, id->idProduct);
	}

	result = usb_stor_probe1(&us, intf, id, unusual_dev,
				 &usb_stor_host_template);
	if (result)
		return result;

	/* No special transport or protocol settings in the main module */

	result = usb_stor_probe2(us);
	return result;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
alan stern
alan stern
68
41.98%
1
14.29%
huajun li
huajun li
60
37.04%
1
14.29%
hans de goede
hans de goede
24
14.81%
2
28.57%
joe perches
joe perches
6
3.70%
1
14.29%
akinobu mita
akinobu mita
3
1.85%
1
14.29%
sebastian andrzej siewior
sebastian andrzej siewior
1
0.62%
1
14.29%
Total
162
100.00%
7
100.00%


static struct usb_driver usb_storage_driver = {
	.name =		DRV_NAME,
	.probe =	storage_probe,
	.disconnect =	usb_stor_disconnect,
	.suspend =	usb_stor_suspend,
	.resume =	usb_stor_resume,
	.reset_resume =	usb_stor_reset_resume,
	.pre_reset =	usb_stor_pre_reset,
	.post_reset =	usb_stor_post_reset,
	.id_table =	usb_storage_usb_ids,
	.supports_autosuspend = 1,
	.soft_unbind =	1,
};

module_usb_stor_driver(usb_storage_driver, usb_stor_host_template, DRV_NAME);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
matthew dharm
matthew dharm
1375
32.31%
34
25.95%
alan stern
alan stern
1181
27.75%
30
22.90%
linus torvalds
linus torvalds
501
11.77%
6
4.58%
pre-git
pre-git
182
4.28%
8
6.11%
lei ming
lei ming
131
3.08%
1
0.76%
felipe contreras
felipe contreras
129
3.03%
2
1.53%
hans de goede
hans de goede
110
2.58%
7
5.34%
joe perches
joe perches
76
1.79%
1
0.76%
huajun li
huajun li
72
1.69%
1
0.76%
david vrabel
david vrabel
51
1.20%
1
0.76%
greg kroah-hartman
greg kroah-hartman
45
1.06%
4
3.05%
mark knibbs
mark knibbs
43
1.01%
1
0.76%
matthew wilcox
matthew wilcox
42
0.99%
2
1.53%
daniel drake
daniel drake
29
0.68%
1
0.76%
fangxiaozhi
fangxiaozhi
29
0.68%
1
0.76%
akinobu mita
akinobu mita
24
0.56%
1
0.76%
pete zaitcev
pete zaitcev
24
0.56%
1
0.76%
oliver neukum
oliver neukum
21
0.49%
1
0.76%
karl relton
karl relton
20
0.47%
1
0.76%
phil dibowitz
phil dibowitz
20
0.47%
2
1.53%
felipe balbi
felipe balbi
20
0.47%
1
0.76%
arjan van de ven
arjan van de ven
20
0.47%
2
1.53%
luben tuikov
luben tuikov
15
0.35%
1
0.76%
michal nazarewicz
michal nazarewicz
15
0.35%
1
0.76%
ming lei
ming lei
11
0.26%
1
0.76%
namjae jeon
namjae jeon
10
0.23%
1
0.76%
julia lawall
julia lawall
9
0.21%
1
0.76%
david brownell
david brownell
8
0.19%
1
0.76%
luiz fernando capitulino
luiz fernando capitulino
8
0.19%
1
0.76%
richard sharpe
richard sharpe
7
0.16%
1
0.76%
christoph hellwig
christoph hellwig
5
0.12%
2
1.53%
manfred spraul
manfred spraul
5
0.12%
1
0.76%
dan williams
dan williams
3
0.07%
1
0.76%
kevin lloyd
kevin lloyd
3
0.07%
1
0.76%
hannes reinecke
hannes reinecke
2
0.05%
1
0.76%
andrew lunn
andrew lunn
2
0.05%
1
0.76%
daniel mack
daniel mack
2
0.05%
1
0.76%
adrian bunk
adrian bunk
1
0.02%
1
0.76%
sebastian andrzej siewior
sebastian andrzej siewior
1
0.02%
1
0.76%
sam ravnborg
sam ravnborg
1
0.02%
1
0.76%
jeffrin jose
jeffrin jose
1
0.02%
1
0.76%
nigel cunningham
nigel cunningham
1
0.02%
1
0.76%
jens axboe
jens axboe
1
0.02%
1
0.76%
Total
4256
100.00%
131
100.00%
  
Directory: drivers/usb/storage

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.