cregit-Linux how code gets into the kernel

Release 4.7 include/drm/drm_encoder_slave.h

Directory: include/drm
/*
 * Copyright (C) 2009 Francisco Jerez.
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial
 * portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 */

#ifndef __DRM_ENCODER_SLAVE_H__

#define __DRM_ENCODER_SLAVE_H__

#include <drm/drmP.h>
#include <drm/drm_crtc.h>

/**
 * struct drm_encoder_slave_funcs - Entry points exposed by a slave encoder driver
 * @set_config: Initialize any encoder-specific modesetting parameters.
 *              The meaning of the @params parameter is implementation
 *              dependent. It will usually be a structure with DVO port
 *              data format settings or timings. It's not required for
 *              the new parameters to take effect until the next mode
 *              is set.
 *
 * Most of its members are analogous to the function pointers in
 * &drm_encoder_helper_funcs and they can optionally be used to
 * initialize the latter. Connector-like methods (e.g. @get_modes and
 * @set_property) will typically be wrapped around and only be called
 * if the encoder is the currently selected one for the connector.
 */

struct drm_encoder_slave_funcs {
	
void (*set_config)(struct drm_encoder *encoder,
			   void *params);

	
void (*destroy)(struct drm_encoder *encoder);
	
void (*dpms)(struct drm_encoder *encoder, int mode);
	
void (*save)(struct drm_encoder *encoder);
	
void (*restore)(struct drm_encoder *encoder);
	
bool (*mode_fixup)(struct drm_encoder *encoder,
			   const struct drm_display_mode *mode,
			   struct drm_display_mode *adjusted_mode);
	
int (*mode_valid)(struct drm_encoder *encoder,
			  struct drm_display_mode *mode);
	
void (*mode_set)(struct drm_encoder *encoder,
			 struct drm_display_mode *mode,
			 struct drm_display_mode *adjusted_mode);

	
enum drm_connector_status (*detect)(struct drm_encoder *encoder,
					    struct drm_connector *connector);
	
int (*get_modes)(struct drm_encoder *encoder,
			 struct drm_connector *connector);
	
int (*create_resources)(struct drm_encoder *encoder,
				 struct drm_connector *connector);
	
int (*set_property)(struct drm_encoder *encoder,
			    struct drm_connector *connector,
			    struct drm_property *property,
			    uint64_t val);

};

/**
 * struct drm_encoder_slave - Slave encoder struct
 * @base: DRM encoder object.
 * @slave_funcs: Slave encoder callbacks.
 * @slave_priv: Slave encoder private data.
 * @bus_priv: Bus specific data.
 *
 * A &drm_encoder_slave has two sets of callbacks, @slave_funcs and the
 * ones in @base. The former are never actually called by the common
 * CRTC code, it's just a convenience for splitting the encoder
 * functions in an upper, GPU-specific layer and a (hopefully)
 * GPU-agnostic lower layer: It's the GPU driver responsibility to
 * call the slave methods when appropriate.
 *
 * drm_i2c_encoder_init() provides a way to get an implementation of
 * this.
 */

struct drm_encoder_slave {
	
struct drm_encoder base;

	
const struct drm_encoder_slave_funcs *slave_funcs;
	
void *slave_priv;
	
void *bus_priv;
};

#define to_encoder_slave(x) container_of((x), struct drm_encoder_slave, base)

int drm_i2c_encoder_init(struct drm_device *dev,
			 struct drm_encoder_slave *encoder,
			 struct i2c_adapter *adap,
			 const struct i2c_board_info *info);


/**
 * struct drm_i2c_encoder_driver
 *
 * Describes a device driver for an encoder connected to the GPU
 * through an I2C bus. In addition to the entry points in @i2c_driver
 * an @encoder_init function should be provided. It will be called to
 * give the driver an opportunity to allocate any per-encoder data
 * structures and to initialize the @slave_funcs and (optionally)
 * @slave_priv members of @encoder.
 */

struct drm_i2c_encoder_driver {
	
struct i2c_driver i2c_driver;

	
int (*encoder_init)(struct i2c_client *client,
			    struct drm_device *dev,
			    struct drm_encoder_slave *encoder);

};

#define to_drm_i2c_encoder_driver(x) container_of((x),                       \
                                                  struct drm_i2c_encoder_driver, \
                                                  i2c_driver)

/**
 * drm_i2c_encoder_get_client - Get the I2C client corresponding to an encoder
 */



static inline struct i2c_client *drm_i2c_encoder_get_client(struct drm_encoder *encoder)
{
	return (struct i2c_client *)to_encoder_slave(encoder)->bus_priv;
}


Contributors
PersonTokensPropCommitsCommitProp
francisco jerezfrancisco jerez27100.00%1100.00%


Total27100.00%1100.00%



/**
 * drm_i2c_encoder_register - Register an I2C encoder driver
 * @owner:      Module containing the driver.
 * @driver:     Driver to be registered.
 */



static inline int drm_i2c_encoder_register(struct module *owner,
					   struct drm_i2c_encoder_driver *driver)
{
	return i2c_register_driver(owner, &driver->i2c_driver);
}


Contributors
PersonTokensPropCommitsCommitProp
francisco jerezfrancisco jerez28100.00%1100.00%


Total28100.00%1100.00%



/**
 * drm_i2c_encoder_unregister - Unregister an I2C encoder driver
 * @driver:     Driver to be unregistered.
 */



static inline void drm_i2c_encoder_unregister(struct drm_i2c_encoder_driver *driver)
{
	i2c_del_driver(&driver->i2c_driver);
}


Contributors
PersonTokensPropCommitsCommitProp
francisco jerezfrancisco jerez1995.00%150.00%


pekka paalanenpekka paalanen15.00%150.00%


Total20100.00%2100.00%



void drm_i2c_encoder_destroy(struct drm_encoder *encoder);


/*
 * Wrapper fxns which can be plugged in to drm_encoder_helper_funcs:
 */

void drm_i2c_encoder_dpms(struct drm_encoder *encoder, int mode);
bool drm_i2c_encoder_mode_fixup(struct drm_encoder *encoder,
		const struct drm_display_mode *mode,
		struct drm_display_mode *adjusted_mode);
void drm_i2c_encoder_prepare(struct drm_encoder *encoder);
void drm_i2c_encoder_commit(struct drm_encoder *encoder);
void drm_i2c_encoder_mode_set(struct drm_encoder *encoder,
		struct drm_display_mode *mode,
		struct drm_display_mode *adjusted_mode);
enum drm_connector_status drm_i2c_encoder_detect(struct drm_encoder *encoder,
	    struct drm_connector *connector);
void drm_i2c_encoder_save(struct drm_encoder *encoder);
void drm_i2c_encoder_restore(struct drm_encoder *encoder);


#endif

Overall Contributors
PersonTokensPropCommitsCommitProp
francisco jerezfrancisco jerez40478.91%116.67%


rob clarkrob clark10320.12%116.67%


david howellsdavid howells20.39%116.67%


laurent pinchartlaurent pinchart10.20%116.67%


pekka paalanenpekka paalanen10.20%116.67%


ville syrjalaville syrjala10.20%116.67%


Total512100.00%6100.00%

  
Directory: include/drm



Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}