Release 4.7 include/linux/amba/serial.h
/*
* linux/include/asm-arm/hardware/serial_amba.h
*
* Internal header file for AMBA serial ports
*
* Copyright (C) ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
#include <linux/types.h>
/* -------------------------------------------------------------------------------
* From AMBA UART (PL010) Block Specification
* -------------------------------------------------------------------------------
* UART Register Offsets.
*/
#define UART01x_DR 0x00
/* Data read or written from the interface. */
#define UART01x_RSR 0x04
/* Receive status register (Read). */
#define UART01x_ECR 0x04
/* Error clear register (Write). */
#define UART010_LCRH 0x08
/* Line control register, high byte. */
#define ST_UART011_DMAWM 0x08
/* DMA watermark configure register. */
#define UART010_LCRM 0x0C
/* Line control register, middle byte. */
#define ST_UART011_TIMEOUT 0x0C
/* Timeout period register. */
#define UART010_LCRL 0x10
/* Line control register, low byte. */
#define UART010_CR 0x14
/* Control register. */
#define UART01x_FR 0x18
/* Flag register (Read only). */
#define UART010_IIR 0x1C
/* Interrupt identification register (Read). */
#define UART010_ICR 0x1C
/* Interrupt clear register (Write). */
#define ST_UART011_LCRH_RX 0x1C
/* Rx line control register. */
#define UART01x_ILPR 0x20
/* IrDA low power counter register. */
#define UART011_IBRD 0x24
/* Integer baud rate divisor register. */
#define UART011_FBRD 0x28
/* Fractional baud rate divisor register. */
#define UART011_LCRH 0x2c
/* Line control register. */
#define ST_UART011_LCRH_TX 0x2c
/* Tx Line control register. */
#define UART011_CR 0x30
/* Control register. */
#define UART011_IFLS 0x34
/* Interrupt fifo level select. */
#define UART011_IMSC 0x38
/* Interrupt mask. */
#define UART011_RIS 0x3c
/* Raw interrupt status. */
#define UART011_MIS 0x40
/* Masked interrupt status. */
#define UART011_ICR 0x44
/* Interrupt clear register. */
#define UART011_DMACR 0x48
/* DMA control register. */
#define ST_UART011_XFCR 0x50
/* XON/XOFF control register. */
#define ST_UART011_XON1 0x54
/* XON1 register. */
#define ST_UART011_XON2 0x58
/* XON2 register. */
#define ST_UART011_XOFF1 0x5C
/* XON1 register. */
#define ST_UART011_XOFF2 0x60
/* XON2 register. */
#define ST_UART011_ITCR 0x80
/* Integration test control register. */
#define ST_UART011_ITIP 0x84
/* Integration test input register. */
#define ST_UART011_ABCR 0x100
/* Autobaud control register. */
#define ST_UART011_ABIMSC 0x15C
/* Autobaud interrupt mask/clear register. */
/*
* ZTE UART register offsets. This UART has a radically different address
* allocation from the ARM and ST variants, so we list all registers here.
* We assume unlisted registers do not exist.
*/
#define ZX_UART011_DR 0x04
#define ZX_UART011_FR 0x14
#define ZX_UART011_IBRD 0x24
#define ZX_UART011_FBRD 0x28
#define ZX_UART011_LCRH 0x30
#define ZX_UART011_CR 0x34
#define ZX_UART011_IFLS 0x38
#define ZX_UART011_IMSC 0x40
#define ZX_UART011_RIS 0x44
#define ZX_UART011_MIS 0x48
#define ZX_UART011_ICR 0x4c
#define ZX_UART011_DMACR 0x50
#define UART011_DR_OE (1 << 11)
#define UART011_DR_BE (1 << 10)
#define UART011_DR_PE (1 << 9)
#define UART011_DR_FE (1 << 8)
#define UART01x_RSR_OE 0x08
#define UART01x_RSR_BE 0x04
#define UART01x_RSR_PE 0x02
#define UART01x_RSR_FE 0x01
#define UART011_FR_RI 0x100
#define UART011_FR_TXFE 0x080
#define UART011_FR_RXFF 0x040
#define UART01x_FR_TXFF 0x020
#define UART01x_FR_RXFE 0x010
#define UART01x_FR_BUSY 0x008
#define UART01x_FR_DCD 0x004
#define UART01x_FR_DSR 0x002
#define UART01x_FR_CTS 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
#define UART011_CR_CTSEN 0x8000
/* CTS hardware flow control */
#define UART011_CR_RTSEN 0x4000
/* RTS hardware flow control */
#define UART011_CR_OUT2 0x2000
/* OUT2 */
#define UART011_CR_OUT1 0x1000
/* OUT1 */
#define UART011_CR_RTS 0x0800
/* RTS */
#define UART011_CR_DTR 0x0400
/* DTR */
#define UART011_CR_RXE 0x0200
/* receive enable */
#define UART011_CR_TXE 0x0100
/* transmit enable */
#define UART011_CR_LBE 0x0080
/* loopback enable */
#define UART010_CR_RTIE 0x0040
#define UART010_CR_TIE 0x0020
#define UART010_CR_RIE 0x0010
#define UART010_CR_MSIE 0x0008
#define ST_UART011_CR_OVSFACT 0x0008
/* Oversampling factor */
#define UART01x_CR_IIRLP 0x0004
/* SIR low power mode */
#define UART01x_CR_SIREN 0x0002
/* SIR enable */
#define UART01x_CR_UARTEN 0x0001
/* UART enable */
#define UART011_LCRH_SPS 0x80
#define UART01x_LCRH_WLEN_8 0x60
#define UART01x_LCRH_WLEN_7 0x40
#define UART01x_LCRH_WLEN_6 0x20
#define UART01x_LCRH_WLEN_5 0x00
#define UART01x_LCRH_FEN 0x10
#define UART01x_LCRH_STP2 0x08
#define UART01x_LCRH_EPS 0x04
#define UART01x_LCRH_PEN 0x02
#define UART01x_LCRH_BRK 0x01
#define ST_UART011_DMAWM_RX_1 (0 << 3)
#define ST_UART011_DMAWM_RX_2 (1 << 3)
#define ST_UART011_DMAWM_RX_4 (2 << 3)
#define ST_UART011_DMAWM_RX_8 (3 << 3)
#define ST_UART011_DMAWM_RX_16 (4 << 3)
#define ST_UART011_DMAWM_RX_32 (5 << 3)
#define ST_UART011_DMAWM_RX_48 (6 << 3)
#define ST_UART011_DMAWM_TX_1 0
#define ST_UART011_DMAWM_TX_2 1
#define ST_UART011_DMAWM_TX_4 2
#define ST_UART011_DMAWM_TX_8 3
#define ST_UART011_DMAWM_TX_16 4
#define ST_UART011_DMAWM_TX_32 5
#define ST_UART011_DMAWM_TX_48 6
#define UART010_IIR_RTIS 0x08
#define UART010_IIR_TIS 0x04
#define UART010_IIR_RIS 0x02
#define UART010_IIR_MIS 0x01
#define UART011_IFLS_RX1_8 (0 << 3)
#define UART011_IFLS_RX2_8 (1 << 3)
#define UART011_IFLS_RX4_8 (2 << 3)
#define UART011_IFLS_RX6_8 (3 << 3)
#define UART011_IFLS_RX7_8 (4 << 3)
#define UART011_IFLS_TX1_8 (0 << 0)
#define UART011_IFLS_TX2_8 (1 << 0)
#define UART011_IFLS_TX4_8 (2 << 0)
#define UART011_IFLS_TX6_8 (3 << 0)
#define UART011_IFLS_TX7_8 (4 << 0)
/* special values for ST vendor with deeper fifo */
#define UART011_IFLS_RX_HALF (5 << 3)
#define UART011_IFLS_TX_HALF (5 << 0)
#define UART011_OEIM (1 << 10)
/* overrun error interrupt mask */
#define UART011_BEIM (1 << 9)
/* break error interrupt mask */
#define UART011_PEIM (1 << 8)
/* parity error interrupt mask */
#define UART011_FEIM (1 << 7)
/* framing error interrupt mask */
#define UART011_RTIM (1 << 6)
/* receive timeout interrupt mask */
#define UART011_TXIM (1 << 5)
/* transmit interrupt mask */
#define UART011_RXIM (1 << 4)
/* receive interrupt mask */
#define UART011_DSRMIM (1 << 3)
/* DSR interrupt mask */
#define UART011_DCDMIM (1 << 2)
/* DCD interrupt mask */
#define UART011_CTSMIM (1 << 1)
/* CTS interrupt mask */
#define UART011_RIMIM (1 << 0)
/* RI interrupt mask */
#define UART011_OEIS (1 << 10)
/* overrun error interrupt status */
#define UART011_BEIS (1 << 9)
/* break error interrupt status */
#define UART011_PEIS (1 << 8)
/* parity error interrupt status */
#define UART011_FEIS (1 << 7)
/* framing error interrupt status */
#define UART011_RTIS (1 << 6)
/* receive timeout interrupt status */
#define UART011_TXIS (1 << 5)
/* transmit interrupt status */
#define UART011_RXIS (1 << 4)
/* receive interrupt status */
#define UART011_DSRMIS (1 << 3)
/* DSR interrupt status */
#define UART011_DCDMIS (1 << 2)
/* DCD interrupt status */
#define UART011_CTSMIS (1 << 1)
/* CTS interrupt status */
#define UART011_RIMIS (1 << 0)
/* RI interrupt status */
#define UART011_OEIC (1 << 10)
/* overrun error interrupt clear */
#define UART011_BEIC (1 << 9)
/* break error interrupt clear */
#define UART011_PEIC (1 << 8)
/* parity error interrupt clear */
#define UART011_FEIC (1 << 7)
/* framing error interrupt clear */
#define UART011_RTIC (1 << 6)
/* receive timeout interrupt clear */
#define UART011_TXIC (1 << 5)
/* transmit interrupt clear */
#define UART011_RXIC (1 << 4)
/* receive interrupt clear */
#define UART011_DSRMIC (1 << 3)
/* DSR interrupt clear */
#define UART011_DCDMIC (1 << 2)
/* DCD interrupt clear */
#define UART011_CTSMIC (1 << 1)
/* CTS interrupt clear */
#define UART011_RIMIC (1 << 0)
/* RI interrupt clear */
#define UART011_DMAONERR (1 << 2)
/* disable dma on error */
#define UART011_TXDMAE (1 << 1)
/* enable transmit dma */
#define UART011_RXDMAE (1 << 0)
/* enable receive dma */
#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
#ifndef __ASSEMBLY__
struct amba_device; /* in uncompress this is included but amba/bus.h is not */
struct amba_pl010_data {
void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
};
struct dma_chan;
struct amba_pl011_data {
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
void *dma_rx_param;
void *dma_tx_param;
bool dma_rx_poll_enable;
unsigned int dma_rx_poll_rate;
unsigned int dma_rx_poll_timeout;
void (*init) (void);
void (*exit) (void);
};
#endif
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| russell king | russell king | 714 | 86.02% | 6 | 40.00% |
| linus walleij | linus walleij | 70 | 8.43% | 3 | 20.00% |
| shreshtha kumar sahu | shreshtha kumar sahu | 18 | 2.17% | 1 | 6.67% |
| alessandro rubini | alessandro rubini | 13 | 1.57% | 2 | 13.33% |
| chanho min | chanho min | 11 | 1.33% | 1 | 6.67% |
| viresh kumar | viresh kumar | 3 | 0.36% | 1 | 6.67% |
| maxime jayat | maxime jayat | 1 | 0.12% | 1 | 6.67% |
| Total | 830 | 100.00% | 15 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.