cregit-Linux how code gets into the kernel

Release 4.7 include/linux/i2c/adp5588.h

/*
 * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
 *
 * Copyright 2009-2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#ifndef _ADP5588_H

#define _ADP5588_H


#define DEV_ID 0x00		
/* Device ID */

#define CFG 0x01		
/* Configuration Register1 */

#define INT_STAT 0x02		
/* Interrupt Status Register */

#define KEY_LCK_EC_STAT 0x03	
/* Key Lock and Event Counter Register */

#define Key_EVENTA 0x04		
/* Key Event Register A */

#define Key_EVENTB 0x05		
/* Key Event Register B */

#define Key_EVENTC 0x06		
/* Key Event Register C */

#define Key_EVENTD 0x07		
/* Key Event Register D */

#define Key_EVENTE 0x08		
/* Key Event Register E */

#define Key_EVENTF 0x09		
/* Key Event Register F */

#define Key_EVENTG 0x0A		
/* Key Event Register G */

#define Key_EVENTH 0x0B		
/* Key Event Register H */

#define Key_EVENTI 0x0C		
/* Key Event Register I */

#define Key_EVENTJ 0x0D		
/* Key Event Register J */

#define KP_LCK_TMR 0x0E		
/* Keypad Lock1 to Lock2 Timer */

#define UNLOCK1 0x0F		
/* Unlock Key1 */

#define UNLOCK2 0x10		
/* Unlock Key2 */

#define GPIO_INT_STAT1 0x11	
/* GPIO Interrupt Status */

#define GPIO_INT_STAT2 0x12	
/* GPIO Interrupt Status */

#define GPIO_INT_STAT3 0x13	
/* GPIO Interrupt Status */

#define GPIO_DAT_STAT1 0x14	
/* GPIO Data Status, Read twice to clear */

#define GPIO_DAT_STAT2 0x15	
/* GPIO Data Status, Read twice to clear */

#define GPIO_DAT_STAT3 0x16	
/* GPIO Data Status, Read twice to clear */

#define GPIO_DAT_OUT1 0x17	
/* GPIO DATA OUT */

#define GPIO_DAT_OUT2 0x18	
/* GPIO DATA OUT */

#define GPIO_DAT_OUT3 0x19	
/* GPIO DATA OUT */

#define GPIO_INT_EN1 0x1A	
/* GPIO Interrupt Enable */

#define GPIO_INT_EN2 0x1B	
/* GPIO Interrupt Enable */

#define GPIO_INT_EN3 0x1C	
/* GPIO Interrupt Enable */

#define KP_GPIO1 0x1D		
/* Keypad or GPIO Selection */

#define KP_GPIO2 0x1E		
/* Keypad or GPIO Selection */

#define KP_GPIO3 0x1F		
/* Keypad or GPIO Selection */

#define GPI_EM1 0x20		
/* GPI Event Mode 1 */

#define GPI_EM2 0x21		
/* GPI Event Mode 2 */

#define GPI_EM3 0x22		
/* GPI Event Mode 3 */

#define GPIO_DIR1 0x23		
/* GPIO Data Direction */

#define GPIO_DIR2 0x24		
/* GPIO Data Direction */

#define GPIO_DIR3 0x25		
/* GPIO Data Direction */

#define GPIO_INT_LVL1 0x26	
/* GPIO Edge/Level Detect */

#define GPIO_INT_LVL2 0x27	
/* GPIO Edge/Level Detect */

#define GPIO_INT_LVL3 0x28	
/* GPIO Edge/Level Detect */

#define Debounce_DIS1 0x29	
/* Debounce Disable */

#define Debounce_DIS2 0x2A	
/* Debounce Disable */

#define Debounce_DIS3 0x2B	
/* Debounce Disable */

#define GPIO_PULL1 0x2C		
/* GPIO Pull Disable */

#define GPIO_PULL2 0x2D		
/* GPIO Pull Disable */

#define GPIO_PULL3 0x2E		
/* GPIO Pull Disable */

#define CMP_CFG_STAT 0x30	
/* Comparator Configuration and Status Register */

#define CMP_CONFG_SENS1 0x31	
/* Sensor1 Comparator Configuration Register */

#define CMP_CONFG_SENS2 0x32	
/* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */

#define CMP1_LVL2_TRIP 0x33	
/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */

#define CMP1_LVL2_HYS 0x34	
/* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */

#define CMP1_LVL3_TRIP 0x35	
/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */

#define CMP1_LVL3_HYS 0x36	
/* Sensor 2 Comparator Configuration Register */

#define CMP2_LVL2_TRIP 0x37	
/* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */

#define CMP2_LVL2_HYS 0x38	
/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */

#define CMP2_LVL3_TRIP 0x39	
/* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */

#define CMP2_LVL3_HYS 0x3A	
/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */

#define CMP1_ADC_DAT_R1 0x3B	
/* Comparator 1 ADC data Register1 */

#define CMP1_ADC_DAT_R2 0x3C	
/* Comparator 1 ADC data Register2 */

#define CMP2_ADC_DAT_R1 0x3D	
/* Comparator 2 ADC data Register1 */

#define CMP2_ADC_DAT_R2 0x3E	
/* Comparator 2 ADC data Register2 */


#define ADP5588_DEVICE_ID_MASK	0xF

 /* Configuration Register1 */

#define ADP5588_AUTO_INC	(1 << 7)

#define ADP5588_GPIEM_CFG	(1 << 6)

#define ADP5588_OVR_FLOW_M	(1 << 5)

#define ADP5588_INT_CFG		(1 << 4)

#define ADP5588_OVR_FLOW_IEN	(1 << 3)

#define ADP5588_K_LCK_IM	(1 << 2)

#define ADP5588_GPI_IEN		(1 << 1)

#define ADP5588_KE_IEN		(1 << 0)

/* Interrupt Status Register */

#define ADP5588_CMP2_INT	(1 << 5)

#define ADP5588_CMP1_INT	(1 << 4)

#define ADP5588_OVR_FLOW_INT	(1 << 3)

#define ADP5588_K_LCK_INT	(1 << 2)

#define ADP5588_GPI_INT		(1 << 1)

#define ADP5588_KE_INT		(1 << 0)

/* Key Lock and Event Counter Register */

#define ADP5588_K_LCK_EN	(1 << 6)

#define ADP5588_LCK21		0x30

#define ADP5588_KEC		0xF


#define ADP5588_MAXGPIO		18

#define ADP5588_BANK(offs)	((offs) >> 3)

#define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))

/* Put one of these structures in i2c_board_info platform_data */


#define ADP5588_KEYMAPSIZE	80


#define GPI_PIN_ROW0 97

#define GPI_PIN_ROW1 98

#define GPI_PIN_ROW2 99

#define GPI_PIN_ROW3 100

#define GPI_PIN_ROW4 101

#define GPI_PIN_ROW5 102

#define GPI_PIN_ROW6 103

#define GPI_PIN_ROW7 104

#define GPI_PIN_COL0 105

#define GPI_PIN_COL1 106

#define GPI_PIN_COL2 107

#define GPI_PIN_COL3 108

#define GPI_PIN_COL4 109

#define GPI_PIN_COL5 110

#define GPI_PIN_COL6 111

#define GPI_PIN_COL7 112

#define GPI_PIN_COL8 113

#define GPI_PIN_COL9 114


#define GPI_PIN_ROW_BASE GPI_PIN_ROW0

#define GPI_PIN_ROW_END GPI_PIN_ROW7

#define GPI_PIN_COL_BASE GPI_PIN_COL0

#define GPI_PIN_COL_END GPI_PIN_COL9


#define GPI_PIN_BASE GPI_PIN_ROW_BASE

#define GPI_PIN_END GPI_PIN_COL_END


#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)


struct adp5588_gpi_map {
	
unsigned short pin;
	
unsigned short sw_evt;
};


struct adp5588_kpad_platform_data {
	
int rows;			/* Number of rows */
	
int cols;			/* Number of columns */
	
const unsigned short *keymap;	/* Pointer to keymap */
	
unsigned short keymapsize;	/* Keymap size */
	
unsigned repeat:1;		/* Enable key repeat */
	
unsigned en_keylock:1;		/* Enable Key Lock feature */
	
unsigned short unlock_key1;	/* Unlock Key 1 */
	
unsigned short unlock_key2;	/* Unlock Key 2 */
	
const struct adp5588_gpi_map *gpimap;
	
unsigned short gpimapsize;
	
const struct adp5588_gpio_platform_data *gpio_data;
};

struct i2c_client; /* forward declaration */


struct adp5588_gpio_platform_data {
	
int gpio_start;		/* GPIO Chip base # */
	
const char *const *names;
	
unsigned irq_base;	/* interrupt base # */
	
unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
	
int	(*setup)(struct i2c_client *client,
				unsigned gpio, unsigned ngpio,
				void *context);
	
int	(*teardown)(struct i2c_client *client,
				unsigned gpio, unsigned ngpio,
				void *context);
	
void	*context;
};

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
michael hennerichmichael hennerich53179.37%660.00%
xiaolong chenxiaolong chen12919.28%220.00%
jean-francois dagenaisjean-francois dagenais91.35%220.00%
Total669100.00%10100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}