cregit-Linux how code gets into the kernel

Release 4.7 include/linux/preempt.h

Directory: include/linux
#ifndef __LINUX_PREEMPT_H

#define __LINUX_PREEMPT_H

/*
 * include/linux/preempt.h - macros for accessing and manipulating
 * preempt_count (used for kernel preemption, interrupt count, etc.)
 */

#include <linux/linkage.h>
#include <linux/list.h>

/*
 * We put the hardirq and softirq counter into the preemption
 * counter. The bitmask has the following meaning:
 *
 * - bits 0-7 are the preemption count (max preemption depth: 256)
 * - bits 8-15 are the softirq count (max # of softirqs: 256)
 *
 * The hardirq count could in theory be the same as the number of
 * interrupts in the system, but we run all interrupt handlers with
 * interrupts disabled, so we cannot have nesting interrupts. Though
 * there are a few palaeontologic drivers which reenable interrupts in
 * the handler, so we need more than one bit here.
 *
 *         PREEMPT_MASK:        0x000000ff
 *         SOFTIRQ_MASK:        0x0000ff00
 *         HARDIRQ_MASK:        0x000f0000
 *             NMI_MASK:        0x00100000
 * PREEMPT_NEED_RESCHED:        0x80000000
 */

#define PREEMPT_BITS	8

#define SOFTIRQ_BITS	8

#define HARDIRQ_BITS	4

#define NMI_BITS	1


#define PREEMPT_SHIFT	0

#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)

#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)

#define NMI_SHIFT	(HARDIRQ_SHIFT + HARDIRQ_BITS)


#define __IRQ_MASK(x)	((1UL << (x))-1)


#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)

#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)

#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)

#define NMI_MASK	(__IRQ_MASK(NMI_BITS)     << NMI_SHIFT)


#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)

#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)

#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)

#define NMI_OFFSET	(1UL << NMI_SHIFT)


#define SOFTIRQ_DISABLE_OFFSET	(2 * SOFTIRQ_OFFSET)

/* We use the MSB mostly because its available */

#define PREEMPT_NEED_RESCHED	0x80000000

/* preempt_count() and related functions, depends on PREEMPT_NEED_RESCHED */
#include <asm/preempt.h>


#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)

#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)

#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
                                 | NMI_MASK))

/*
 * Are we doing bottom half or hardware interrupt processing?
 * Are we in a softirq context? Interrupt context?
 * in_softirq - Are we currently processing softirq or have bh disabled?
 * in_serving_softirq - Are we currently processing softirq?
 */

#define in_irq()		(hardirq_count())

#define in_softirq()		(softirq_count())

#define in_interrupt()		(irq_count())

#define in_serving_softirq()	(softirq_count() & SOFTIRQ_OFFSET)

/*
 * Are we in NMI context?
 */

#define in_nmi()	(preempt_count() & NMI_MASK)

/*
 * The preempt_count offset after preempt_disable();
 */
#if defined(CONFIG_PREEMPT_COUNT)

# define PREEMPT_DISABLE_OFFSET	PREEMPT_OFFSET
#else

# define PREEMPT_DISABLE_OFFSET	0
#endif

/*
 * The preempt_count offset after spin_lock()
 */

#define PREEMPT_LOCK_OFFSET	PREEMPT_DISABLE_OFFSET

/*
 * The preempt_count offset needed for things like:
 *
 *  spin_lock_bh()
 *
 * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and
 * softirqs, such that unlock sequences of:
 *
 *  spin_unlock();
 *  local_bh_enable();
 *
 * Work as expected.
 */

#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_LOCK_OFFSET)

/*
 * Are we running in atomic context?  WARNING: this macro cannot
 * always detect atomic context; in particular, it cannot know about
 * held spinlocks in non-preemptible kernels.  Thus it should not be
 * used in the general case to determine whether sleeping is possible.
 * Do not use in_atomic() in driver code.
 */

#define in_atomic()	(preempt_count() != 0)

/*
 * Check whether we were atomic before we did preempt_disable():
 * (used by the scheduler)
 */

#define in_atomic_preempt_off() (preempt_count() != PREEMPT_DISABLE_OFFSET)

#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
extern void preempt_count_add(int val);
extern void preempt_count_sub(int val);

#define preempt_count_dec_and_test() \
	({ preempt_count_sub(1); should_resched(0); })
#else

#define preempt_count_add(val)	__preempt_count_add(val)

#define preempt_count_sub(val)	__preempt_count_sub(val)

#define preempt_count_dec_and_test() __preempt_count_dec_and_test()
#endif


#define __preempt_count_inc() __preempt_count_add(1)

#define __preempt_count_dec() __preempt_count_sub(1)


#define preempt_count_inc() preempt_count_add(1)

#define preempt_count_dec() preempt_count_sub(1)

#ifdef CONFIG_PREEMPT_COUNT


#define preempt_disable() \
do { \
        preempt_count_inc(); \
        barrier(); \
} while (0)


#define sched_preempt_enable_no_resched() \
do { \
        barrier(); \
        preempt_count_dec(); \
} while (0)


#define preempt_enable_no_resched() sched_preempt_enable_no_resched()


#define preemptible()	(preempt_count() == 0 && !irqs_disabled())

#ifdef CONFIG_PREEMPT

#define preempt_enable() \
do { \
        barrier(); \
        if (unlikely(preempt_count_dec_and_test())) \
                __preempt_schedule(); \
} while (0)


#define preempt_enable_notrace() \
do { \
        barrier(); \
        if (unlikely(__preempt_count_dec_and_test())) \
                __preempt_schedule_notrace(); \
} while (0)


#define preempt_check_resched() \
do { \
        if (should_resched(0)) \
                __preempt_schedule(); \
} while (0)

#else /* !CONFIG_PREEMPT */

#define preempt_enable() \
do { \
        barrier(); \
        preempt_count_dec(); \
} while (0)


#define preempt_enable_notrace() \
do { \
        barrier(); \
        __preempt_count_dec(); \
} while (0)


#define preempt_check_resched() do { } while (0)
#endif /* CONFIG_PREEMPT */


#define preempt_disable_notrace() \
do { \
        __preempt_count_inc(); \
        barrier(); \
} while (0)


#define preempt_enable_no_resched_notrace() \
do { \
        barrier(); \
        __preempt_count_dec(); \
} while (0)

#else /* !CONFIG_PREEMPT_COUNT */

/*
 * Even if we don't have any preemption, we need preempt disable/enable
 * to be barriers, so that we don't have things like get_user/put_user
 * that can cause faults and scheduling migrate into our preempt-protected
 * region.
 */

#define preempt_disable()			barrier()

#define sched_preempt_enable_no_resched()	barrier()

#define preempt_enable_no_resched()		barrier()

#define preempt_enable()			barrier()

#define preempt_check_resched()			do { } while (0)


#define preempt_disable_notrace()		barrier()

#define preempt_enable_no_resched_notrace()	barrier()

#define preempt_enable_notrace()		barrier()

#define preemptible()				0

#endif /* CONFIG_PREEMPT_COUNT */

#ifdef MODULE
/*
 * Modules have no business playing preemption tricks.
 */

#undef sched_preempt_enable_no_resched

#undef preempt_enable_no_resched

#undef preempt_enable_no_resched_notrace

#undef preempt_check_resched
#endif


#define preempt_set_need_resched() \
do { \
        set_preempt_need_resched(); \
} while (0)

#define preempt_fold_need_resched() \
do { \
        if (tif_need_resched()) \
                set_preempt_need_resched(); \
} while (0)

#ifdef CONFIG_PREEMPT_NOTIFIERS

struct preempt_notifier;

/**
 * preempt_ops - notifiers called when a task is preempted and rescheduled
 * @sched_in: we're about to be rescheduled:
 *    notifier: struct preempt_notifier for the task being scheduled
 *    cpu:  cpu we're scheduled on
 * @sched_out: we've just been preempted
 *    notifier: struct preempt_notifier for the task being preempted
 *    next: the task that's kicking us out
 *
 * Please note that sched_in and out are called under different
 * contexts.  sched_out is called with rq lock held and irq disabled
 * while sched_in is called without rq lock and irq enabled.  This
 * difference is intentional and depended upon by its users.
 */

struct preempt_ops {
	
void (*sched_in)(struct preempt_notifier *notifier, int cpu);
	
void (*sched_out)(struct preempt_notifier *notifier,
			  struct task_struct *next);
};

/**
 * preempt_notifier - key for installing preemption notifiers
 * @link: internal use
 * @ops: defines the notifier functions to be called
 *
 * Usually used in conjunction with container_of().
 */

struct preempt_notifier {
	
struct hlist_node link;
	
struct preempt_ops *ops;
};

void preempt_notifier_inc(void);
void preempt_notifier_dec(void);
void preempt_notifier_register(struct preempt_notifier *notifier);
void preempt_notifier_unregister(struct preempt_notifier *notifier);


static inline void preempt_notifier_init(struct preempt_notifier *notifier, struct preempt_ops *ops) { INIT_HLIST_NODE(&notifier->link); notifier->ops = ops; }

Contributors

PersonTokensPropCommitsCommitProp
avi kivityavi kivity31100.00%1100.00%
Total31100.00%1100.00%

#endif #endif /* __LINUX_PREEMPT_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
frederic weisbeckerfrederic weisbecker19135.05%726.92%
avi kivityavi kivity11220.55%13.85%
peter zijlstrapeter zijlstra9216.88%726.92%
ingo molnaringo molnar6712.29%27.69%
steven rostedtsteven rostedt509.17%311.54%
konstantin khlebnikovkonstantin khlebnikov112.02%13.85%
thomas gleixnerthomas gleixner101.83%13.85%
linus torvaldslinus torvalds81.47%13.85%
robert loverobert love20.37%13.85%
andrew mortonandrew morton10.18%13.85%
tejun heotejun heo10.18%13.85%
Total545100.00%26100.00%
Directory: include/linux
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}