cregit-Linux how code gets into the kernel

Release 4.7 include/linux/qed/qed_if.h

/* QLogic qed NIC Driver
 *
 * Copyright (c) 2015 QLogic Corporation
 *
 * This software is available under the terms of the GNU General Public License
 * (GPL) Version 2, available from the file COPYING in the main directory of
 * this source tree.
 */

#ifndef _QED_IF_H

#define _QED_IF_H

#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/skbuff.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/io.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/qed/common_hsi.h>
#include <linux/qed/qed_chain.h>


enum dcbx_protocol_type {
	
DCBX_PROTOCOL_ISCSI,
	
DCBX_PROTOCOL_FCOE,
	
DCBX_PROTOCOL_ROCE,
	
DCBX_PROTOCOL_ROCE_V2,
	
DCBX_PROTOCOL_ETH,
	
DCBX_MAX_PROTOCOL_TYPE
};


enum qed_led_mode {
	
QED_LED_MODE_OFF,
	
QED_LED_MODE_ON,
	
QED_LED_MODE_RESTORE
};


#define DIRECT_REG_WR(reg_addr, val) writel((u32)val, \
                                            (void __iomem *)(reg_addr))


#define DIRECT_REG_RD(reg_addr) readl((void __iomem *)(reg_addr))


#define QED_COALESCE_MAX 0xFF

/* forward */
struct qed_dev;


struct qed_eth_pf_params {
	/* The following parameters are used during HW-init
         * and these parameters need to be passed as arguments
         * to update_pf_params routine invoked before slowpath start
         */
	
u16 num_cons;
};


struct qed_pf_params {
	
struct qed_eth_pf_params eth_pf_params;
};


enum qed_int_mode {
	
QED_INT_MODE_INTA,
	
QED_INT_MODE_MSIX,
	
QED_INT_MODE_MSI,
	
QED_INT_MODE_POLL,
};


struct qed_sb_info {
	
struct status_block	*sb_virt;
	
dma_addr_t		sb_phys;
	
u32			sb_ack; /* Last given ack */
	
u16			igu_sb_id;
	
void __iomem		*igu_addr;
	
u8			flags;

#define QED_SB_INFO_INIT        0x1

#define QED_SB_INFO_SETUP       0x2

	
struct qed_dev		*cdev;
};


struct qed_dev_info {
	
unsigned long	pci_mem_start;
	
unsigned long	pci_mem_end;
	
unsigned int	pci_irq;
	
u8		num_hwfns;

	
u8		hw_mac[ETH_ALEN];
	
bool		is_mf_default;

	/* FW version */
	
u16		fw_major;
	
u16		fw_minor;
	
u16		fw_rev;
	
u16		fw_eng;

	/* MFW version */
	
u32		mfw_rev;

	
u32		flash_size;
	
u8		mf_mode;
	
bool		tx_switching;
};


enum qed_sb_type {
	
QED_SB_TYPE_L2_QUEUE,
};


enum qed_protocol {
	
QED_PROTOCOL_ETH,
};


struct qed_link_params {
	
bool	link_up;


#define QED_LINK_OVERRIDE_SPEED_AUTONEG         BIT(0)

#define QED_LINK_OVERRIDE_SPEED_ADV_SPEEDS      BIT(1)

#define QED_LINK_OVERRIDE_SPEED_FORCED_SPEED    BIT(2)

#define QED_LINK_OVERRIDE_PAUSE_CONFIG          BIT(3)

#define QED_LINK_OVERRIDE_LOOPBACK_MODE         BIT(4)
	
u32	override_flags;
	
bool	autoneg;
	
u32	adv_speeds;
	
u32	forced_speed;

#define QED_LINK_PAUSE_AUTONEG_ENABLE           BIT(0)

#define QED_LINK_PAUSE_RX_ENABLE                BIT(1)

#define QED_LINK_PAUSE_TX_ENABLE                BIT(2)
	
u32	pause_config;

#define QED_LINK_LOOPBACK_NONE                  BIT(0)

#define QED_LINK_LOOPBACK_INT_PHY               BIT(1)

#define QED_LINK_LOOPBACK_EXT_PHY               BIT(2)

#define QED_LINK_LOOPBACK_EXT                   BIT(3)

#define QED_LINK_LOOPBACK_MAC                   BIT(4)
	
u32	loopback_mode;
};


struct qed_link_output {
	
bool	link_up;

	
u32	supported_caps;         /* In SUPPORTED defs */
	
u32	advertised_caps;        /* In ADVERTISED defs */
	
u32	lp_caps;                /* In ADVERTISED defs */
	
u32	speed;                  /* In Mb/s */
	
u8	duplex;                 /* In DUPLEX defs */
	
u8	port;                   /* In PORT defs */
	
bool	autoneg;
	
u32	pause_config;
};


struct qed_probe_params {
	
enum qed_protocol protocol;
	
u32 dp_module;
	
u8 dp_level;
	
bool is_vf;
};


#define QED_DRV_VER_STR_SIZE 12

struct qed_slowpath_params {
	
u32	int_mode;
	
u8	drv_major;
	
u8	drv_minor;
	
u8	drv_rev;
	
u8	drv_eng;
	
u8	name[QED_DRV_VER_STR_SIZE];
};


#define ILT_PAGE_SIZE_TCFC 0x8000 
/* 32KB */


struct qed_int_info {
	
struct msix_entry	*msix;
	
u8			msix_cnt;

	/* This should be updated by the protocol driver */
	
u8			used_cnt;
};


struct qed_common_cb_ops {
	
void	(*link_update)(void			*dev,
			       struct qed_link_output	*link);
};


struct qed_selftest_ops {
/**
 * @brief selftest_interrupt - Perform interrupt test
 *
 * @param cdev
 *
 * @return 0 on success, error otherwise.
 */
	
int (*selftest_interrupt)(struct qed_dev *cdev);

/**
 * @brief selftest_memory - Perform memory test
 *
 * @param cdev
 *
 * @return 0 on success, error otherwise.
 */
	
int (*selftest_memory)(struct qed_dev *cdev);

/**
 * @brief selftest_register - Perform register test
 *
 * @param cdev
 *
 * @return 0 on success, error otherwise.
 */
	
int (*selftest_register)(struct qed_dev *cdev);

/**
 * @brief selftest_clock - Perform clock test
 *
 * @param cdev
 *
 * @return 0 on success, error otherwise.
 */
	
int (*selftest_clock)(struct qed_dev *cdev);
};


struct qed_common_ops {
	
struct qed_selftest_ops *selftest;

	
struct qed_dev*	(*probe)(struct pci_dev *dev,
				 struct qed_probe_params *params);

	
void		(*remove)(struct qed_dev *cdev);

	
int		(*set_power_state)(struct qed_dev *cdev,
					   pci_power_t state);

	
void		(*set_id)(struct qed_dev *cdev,
				  char name[],
				  char ver_str[]);

	/* Client drivers need to make this call before slowpath_start.
         * PF params required for the call before slowpath_start is
         * documented within the qed_pf_params structure definition.
         */
	
void		(*update_pf_params)(struct qed_dev *cdev,
					    struct qed_pf_params *params);
	
int		(*slowpath_start)(struct qed_dev *cdev,
					  struct qed_slowpath_params *params);

	
int		(*slowpath_stop)(struct qed_dev *cdev);

	/* Requests to use `cnt' interrupts for fastpath.
         * upon success, returns number of interrupts allocated for fastpath.
         */
	
int		(*set_fp_int)(struct qed_dev *cdev,
				      u16 cnt);

	/* Fills `info' with pointers required for utilizing interrupts */
	
int		(*get_fp_int)(struct qed_dev *cdev,
				      struct qed_int_info *info);

	
u32		(*sb_init)(struct qed_dev *cdev,
				   struct qed_sb_info *sb_info,
				   void *sb_virt_addr,
				   dma_addr_t sb_phy_addr,
				   u16 sb_id,
				   enum qed_sb_type type);

	
u32		(*sb_release)(struct qed_dev *cdev,
				      struct qed_sb_info *sb_info,
				      u16 sb_id);

	
void		(*simd_handler_config)(struct qed_dev *cdev,
					       void *token,
					       int index,
					       void (*handler)(void *));

	
void		(*simd_handler_clean)(struct qed_dev *cdev,
					      int index);

/**
 * @brief can_link_change - can the instance change the link or not
 *
 * @param cdev
 *
 * @return true if link-change is allowed, false otherwise.
 */
	
bool (*can_link_change)(struct qed_dev *cdev);

/**
 * @brief set_link - set links according to params
 *
 * @param cdev
 * @param params - values used to override the default link configuration
 *
 * @return 0 on success, error otherwise.
 */
	
int		(*set_link)(struct qed_dev *cdev,
				    struct qed_link_params *params);

/**
 * @brief get_link - returns the current link state.
 *
 * @param cdev
 * @param if_link - structure to be filled with current link configuration.
 */
	
void		(*get_link)(struct qed_dev *cdev,
				    struct qed_link_output *if_link);

/**
 * @brief - drains chip in case Tx completions fail to arrive due to pause.
 *
 * @param cdev
 */
	
int		(*drain)(struct qed_dev *cdev);

/**
 * @brief update_msglvl - update module debug level
 *
 * @param cdev
 * @param dp_module
 * @param dp_level
 */
	
void		(*update_msglvl)(struct qed_dev *cdev,
					 u32 dp_module,
					 u8 dp_level);

	
int		(*chain_alloc)(struct qed_dev *cdev,
				       enum qed_chain_use_mode intended_use,
				       enum qed_chain_mode mode,
				       u16 num_elems,
				       size_t elem_size,
				       struct qed_chain *p_chain);

	
void		(*chain_free)(struct qed_dev *cdev,
				      struct qed_chain *p_chain);

/**
 * @brief set_led - Configure LED mode
 *
 * @param cdev
 * @param mode - LED mode
 *
 * @return 0 on success, error otherwise.
 */
	
int (*set_led)(struct qed_dev *cdev,
		       enum qed_led_mode mode);
};


#define MASK_FIELD(_name, _value) \
	((_value) &= (_name ## _MASK))


#define FIELD_VALUE(_name, _value) \
	((_value & _name ## _MASK) << _name ## _SHIFT)


#define SET_FIELD(value, name, flag)			       \
	do {                                                   \
                (value) &= ~(name ## _MASK << name ## _SHIFT); \
                (value) |= (((u64)flag) << (name ## _SHIFT));  \
        } while (0)


#define GET_FIELD(value, name) \
	(((value) >> (name ## _SHIFT)) & name ## _MASK)

/* Debug print definitions */

#define DP_ERR(cdev, fmt, ...)						     \
		pr_err("[%s:%d(%s)]" fmt,                                    \
                       __func__, __LINE__,                                   \
                       DP_NAME(cdev) ? DP_NAME(cdev) : "",                   \
                       ## __VA_ARGS__)                                       \

#define DP_NOTICE(cdev, fmt, ...)                                     \
        do {                                                          \
                if (unlikely((cdev)->dp_level <= QED_LEVEL_NOTICE)) { \
                        pr_notice("[%s:%d(%s)]" fmt,                  \
                                  __func__, __LINE__,                 \
                                  DP_NAME(cdev) ? DP_NAME(cdev) : "", \
                                  ## __VA_ARGS__);                    \
                                                                      \
                }                                                     \
        } while (0)


#define DP_INFO(cdev, fmt, ...)					      \
	do {                                                          \
                if (unlikely((cdev)->dp_level <= QED_LEVEL_INFO)) {   \
                        pr_notice("[%s:%d(%s)]" fmt,                  \
                                  __func__, __LINE__,                 \
                                  DP_NAME(cdev) ? DP_NAME(cdev) : "", \
                                  ## __VA_ARGS__);                    \
                }                                                     \
        } while (0)


#define DP_VERBOSE(cdev, module, fmt, ...)				\
	do {                                                            \
                if (unlikely(((cdev)->dp_level <= QED_LEVEL_VERBOSE) && \
                             ((cdev)->dp_module & module))) {           \
                        pr_notice("[%s:%d(%s)]" fmt,                    \
                                  __func__, __LINE__,                   \
                                  DP_NAME(cdev) ? DP_NAME(cdev) : "",   \
                                  ## __VA_ARGS__);                      \
                }                                                       \
        } while (0)


enum DP_LEVEL {
	
QED_LEVEL_VERBOSE	= 0x0,
	
QED_LEVEL_INFO		= 0x1,
	
QED_LEVEL_NOTICE	= 0x2,
	
QED_LEVEL_ERR		= 0x3,
};


#define QED_LOG_LEVEL_SHIFT     (30)

#define QED_LOG_VERBOSE_MASK    (0x3fffffff)

#define QED_LOG_INFO_MASK       (0x40000000)

#define QED_LOG_NOTICE_MASK     (0x80000000)


enum DP_MODULE {
	
QED_MSG_SPQ	= 0x10000,
	
QED_MSG_STATS	= 0x20000,
	
QED_MSG_DCB	= 0x40000,
	
QED_MSG_IOV	= 0x80000,
	
QED_MSG_SP	= 0x100000,
	
QED_MSG_STORAGE = 0x200000,
	
QED_MSG_CXT	= 0x800000,
	
QED_MSG_ILT	= 0x2000000,
	
QED_MSG_ROCE	= 0x4000000,
	
QED_MSG_DEBUG	= 0x8000000,
	/* to be added...up to 0x8000000 */
};


enum qed_mf_mode {
	
QED_MF_DEFAULT,
	
QED_MF_OVLAN,
	
QED_MF_NPAR,
};


struct qed_eth_stats {
	
u64	no_buff_discards;
	
u64	packet_too_big_discard;
	
u64	ttl0_discard;
	
u64	rx_ucast_bytes;
	
u64	rx_mcast_bytes;
	
u64	rx_bcast_bytes;
	
u64	rx_ucast_pkts;
	
u64	rx_mcast_pkts;
	
u64	rx_bcast_pkts;
	
u64	mftag_filter_discards;
	
u64	mac_filter_discards;
	
u64	tx_ucast_bytes;
	
u64	tx_mcast_bytes;
	
u64	tx_bcast_bytes;
	
u64	tx_ucast_pkts;
	
u64	tx_mcast_pkts;
	
u64	tx_bcast_pkts;
	
u64	tx_err_drop_pkts;
	
u64	tpa_coalesced_pkts;
	
u64	tpa_coalesced_events;
	
u64	tpa_aborts_num;
	
u64	tpa_not_coalesced_pkts;
	
u64	tpa_coalesced_bytes;

	/* port */
	
u64	rx_64_byte_packets;
	
u64	rx_65_to_127_byte_packets;
	
u64	rx_128_to_255_byte_packets;
	
u64	rx_256_to_511_byte_packets;
	
u64	rx_512_to_1023_byte_packets;
	
u64	rx_1024_to_1518_byte_packets;
	
u64	rx_1519_to_1522_byte_packets;
	
u64	rx_1519_to_2047_byte_packets;
	
u64	rx_2048_to_4095_byte_packets;
	
u64	rx_4096_to_9216_byte_packets;
	
u64	rx_9217_to_16383_byte_packets;
	
u64	rx_crc_errors;
	
u64	rx_mac_crtl_frames;
	
u64	rx_pause_frames;
	
u64	rx_pfc_frames;
	
u64	rx_align_errors;
	
u64	rx_carrier_errors;
	
u64	rx_oversize_packets;
	
u64	rx_jabbers;
	
u64	rx_undersize_packets;
	
u64	rx_fragments;
	
u64	tx_64_byte_packets;
	
u64	tx_65_to_127_byte_packets;
	
u64	tx_128_to_255_byte_packets;
	
u64	tx_256_to_511_byte_packets;
	
u64	tx_512_to_1023_byte_packets;
	
u64	tx_1024_to_1518_byte_packets;
	
u64	tx_1519_to_2047_byte_packets;
	
u64	tx_2048_to_4095_byte_packets;
	
u64	tx_4096_to_9216_byte_packets;
	
u64	tx_9217_to_16383_byte_packets;
	
u64	tx_pause_frames;
	
u64	tx_pfc_frames;
	
u64	tx_lpi_entry_count;
	
u64	tx_total_collisions;
	
u64	brb_truncates;
	
u64	brb_discards;
	
u64	rx_mac_bytes;
	
u64	rx_mac_uc_packets;
	
u64	rx_mac_mc_packets;
	
u64	rx_mac_bc_packets;
	
u64	rx_mac_frames_ok;
	
u64	tx_mac_bytes;
	
u64	tx_mac_uc_packets;
	
u64	tx_mac_mc_packets;
	
u64	tx_mac_bc_packets;
	
u64	tx_mac_ctrl_frames;
};


#define QED_SB_IDX              0x0002


#define RX_PI           0

#define TX_PI(tc)       (RX_PI + 1 + tc)


struct qed_sb_cnt_info {
	
int	sb_cnt;
	
int	sb_iov_cnt;
	
int	sb_free_blk;
};


static inline u16 qed_sb_update_sb_idx(struct qed_sb_info *sb_info) { u32 prod = 0; u16 rc = 0; prod = le32_to_cpu(sb_info->sb_virt->prod_index) & STATUS_BLOCK_PROD_INDEX_MASK; if (sb_info->sb_ack != prod) { sb_info->sb_ack = prod; rc |= QED_SB_IDX; } /* Let SB update */ mmiowb(); return rc; }

Contributors

PersonTokensPropCommitsCommitProp
yuval mintzyuval mintz62100.00%1100.00%
Total62100.00%1100.00%

/** * * @brief This function creates an update command for interrupts that is * written to the IGU. * * @param sb_info - This is the structure allocated and * initialized per status block. Assumption is * that it was initialized using qed_sb_init * @param int_cmd - Enable/Disable/Nop * @param upd_flg - whether igu consumer should be * updated. * * @return inline void */
static inline void qed_sb_ack(struct qed_sb_info *sb_info, enum igu_int_cmd int_cmd, u8 upd_flg) { struct igu_prod_cons_update igu_ack = { 0 }; igu_ack.sb_id_and_flags = ((sb_info->sb_ack << IGU_PROD_CONS_UPDATE_SB_INDEX_SHIFT) | (upd_flg << IGU_PROD_CONS_UPDATE_UPDATE_FLAG_SHIFT) | (int_cmd << IGU_PROD_CONS_UPDATE_ENABLE_INT_SHIFT) | (IGU_SEG_ACCESS_REG << IGU_PROD_CONS_UPDATE_SEGMENT_ACCESS_SHIFT)); DIRECT_REG_WR(sb_info->igu_addr, igu_ack.sb_id_and_flags); /* Both segments (interrupts & acks) are written to same place address; * Need to guarantee all commands will be received (in-order) by HW. */ mmiowb(); barrier(); }

Contributors

PersonTokensPropCommitsCommitProp
yuval mintzyuval mintz77100.00%1100.00%
Total77100.00%1100.00%


static inline void __internal_ram_wr(void *p_hwfn, void __iomem *addr, int size, u32 *data) { unsigned int i; for (i = 0; i < size / sizeof(*data); i++) DIRECT_REG_WR(&((u32 __iomem *)addr)[i], data[i]); }

Contributors

PersonTokensPropCommitsCommitProp
yuval mintzyuval mintz67100.00%1100.00%
Total67100.00%1100.00%


static inline void internal_ram_wr(void __iomem *addr, int size, u32 *data) { __internal_ram_wr(NULL, addr, size, data); }

Contributors

PersonTokensPropCommitsCommitProp
yuval mintzyuval mintz30100.00%1100.00%
Total30100.00%1100.00%

enum qed_rss_caps { QED_RSS_IPV4 = 0x1, QED_RSS_IPV6 = 0x2, QED_RSS_IPV4_TCP = 0x4, QED_RSS_IPV6_TCP = 0x8, QED_RSS_IPV4_UDP = 0x10, QED_RSS_IPV6_UDP = 0x20, }; #define QED_RSS_IND_TABLE_SIZE 128 #define QED_RSS_KEY_SIZE 10 /* size in 32b chunks */ #endif

Overall Contributors

PersonTokensPropCommitsCommitProp
yuval mintzyuval mintz142489.39%763.64%
sudarsana kallurusudarsana kalluru16910.61%436.36%
Total1593100.00%11100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}