Release 4.7 include/linux/rio_regs.h
/*
* RapidIO register definitions
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef LINUX_RIO_REGS_H
#define LINUX_RIO_REGS_H
/*
* In RapidIO, each device has a 16MB configuration space that is
* accessed via maintenance transactions. Portions of configuration
* space are standardized and/or reserved.
*/
#define RIO_MAINT_SPACE_SZ 0x1000000
/* 16MB of RapidIO mainenance space */
#define RIO_DEV_ID_CAR 0x00
/* [I] Device Identity CAR */
#define RIO_DEV_INFO_CAR 0x04
/* [I] Device Information CAR */
#define RIO_ASM_ID_CAR 0x08
/* [I] Assembly Identity CAR */
#define RIO_ASM_ID_MASK 0xffff0000
/* [I] Asm ID Mask */
#define RIO_ASM_VEN_ID_MASK 0x0000ffff
/* [I] Asm Vend Mask */
#define RIO_ASM_INFO_CAR 0x0c
/* [I] Assembly Information CAR */
#define RIO_ASM_REV_MASK 0xffff0000
/* [I] Asm Rev Mask */
#define RIO_EXT_FTR_PTR_MASK 0x0000ffff
/* [I] EF_PTR Mask */
#define RIO_PEF_CAR 0x10
/* [I] Processing Element Features CAR */
#define RIO_PEF_BRIDGE 0x80000000
/* [I] Bridge */
#define RIO_PEF_MEMORY 0x40000000
/* [I] MMIO */
#define RIO_PEF_PROCESSOR 0x20000000
/* [I] Processor */
#define RIO_PEF_SWITCH 0x10000000
/* [I] Switch */
#define RIO_PEF_MULTIPORT 0x08000000
/* [VI, 2.1] Multiport */
#define RIO_PEF_INB_MBOX 0x00f00000
/* [II, <= 1.2] Mailboxes */
#define RIO_PEF_INB_MBOX0 0x00800000
/* [II, <= 1.2] Mailbox 0 */
#define RIO_PEF_INB_MBOX1 0x00400000
/* [II, <= 1.2] Mailbox 1 */
#define RIO_PEF_INB_MBOX2 0x00200000
/* [II, <= 1.2] Mailbox 2 */
#define RIO_PEF_INB_MBOX3 0x00100000
/* [II, <= 1.2] Mailbox 3 */
#define RIO_PEF_INB_DOORBELL 0x00080000
/* [II, <= 1.2] Doorbells */
#define RIO_PEF_EXT_RT 0x00000200
/* [III, 1.3] Extended route table support */
#define RIO_PEF_STD_RT 0x00000100
/* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010
/* [III] CTLS */
#define RIO_PEF_EXT_FEATURES 0x00000008
/* [I] EFT_PTR valid */
#define RIO_PEF_ADDR_66 0x00000004
/* [I] 66 bits */
#define RIO_PEF_ADDR_50 0x00000002
/* [I] 50 bits */
#define RIO_PEF_ADDR_34 0x00000001
/* [I] 34 bits */
#define RIO_SWP_INFO_CAR 0x14
/* [I] Switch Port Information CAR */
#define RIO_SWP_INFO_PORT_TOTAL_MASK 0x0000ff00
/* [I] Total number of ports */
#define RIO_SWP_INFO_PORT_NUM_MASK 0x000000ff
/* [I] Maintenance transaction port number */
#define RIO_GET_TOTAL_PORTS(x) ((x & RIO_SWP_INFO_PORT_TOTAL_MASK) >> 8)
#define RIO_GET_PORT_NUM(x) (x & RIO_SWP_INFO_PORT_NUM_MASK)
#define RIO_SRC_OPS_CAR 0x18
/* [I] Source Operations CAR */
#define RIO_SRC_OPS_READ 0x00008000
/* [I] Read op */
#define RIO_SRC_OPS_WRITE 0x00004000
/* [I] Write op */
#define RIO_SRC_OPS_STREAM_WRITE 0x00002000
/* [I] Str-write op */
#define RIO_SRC_OPS_WRITE_RESPONSE 0x00001000
/* [I] Write/resp op */
#define RIO_SRC_OPS_DATA_MSG 0x00000800
/* [II] Data msg op */
#define RIO_SRC_OPS_DOORBELL 0x00000400
/* [II] Doorbell op */
#define RIO_SRC_OPS_ATOMIC_TST_SWP 0x00000100
/* [I] Atomic TAS op */
#define RIO_SRC_OPS_ATOMIC_INC 0x00000080
/* [I] Atomic inc op */
#define RIO_SRC_OPS_ATOMIC_DEC 0x00000040
/* [I] Atomic dec op */
#define RIO_SRC_OPS_ATOMIC_SET 0x00000020
/* [I] Atomic set op */
#define RIO_SRC_OPS_ATOMIC_CLR 0x00000010
/* [I] Atomic clr op */
#define RIO_SRC_OPS_PORT_WRITE 0x00000004
/* [I] Port-write op */
#define RIO_DST_OPS_CAR 0x1c
/* Destination Operations CAR */
#define RIO_DST_OPS_READ 0x00008000
/* [I] Read op */
#define RIO_DST_OPS_WRITE 0x00004000
/* [I] Write op */
#define RIO_DST_OPS_STREAM_WRITE 0x00002000
/* [I] Str-write op */
#define RIO_DST_OPS_WRITE_RESPONSE 0x00001000
/* [I] Write/resp op */
#define RIO_DST_OPS_DATA_MSG 0x00000800
/* [II] Data msg op */
#define RIO_DST_OPS_DOORBELL 0x00000400
/* [II] Doorbell op */
#define RIO_DST_OPS_ATOMIC_TST_SWP 0x00000100
/* [I] Atomic TAS op */
#define RIO_DST_OPS_ATOMIC_INC 0x00000080
/* [I] Atomic inc op */
#define RIO_DST_OPS_ATOMIC_DEC 0x00000040
/* [I] Atomic dec op */
#define RIO_DST_OPS_ATOMIC_SET 0x00000020
/* [I] Atomic set op */
#define RIO_DST_OPS_ATOMIC_CLR 0x00000010
/* [I] Atomic clr op */
#define RIO_DST_OPS_PORT_WRITE 0x00000004
/* [I] Port-write op */
#define RIO_OPS_READ 0x00008000
/* [I] Read op */
#define RIO_OPS_WRITE 0x00004000
/* [I] Write op */
#define RIO_OPS_STREAM_WRITE 0x00002000
/* [I] Str-write op */
#define RIO_OPS_WRITE_RESPONSE 0x00001000
/* [I] Write/resp op */
#define RIO_OPS_DATA_MSG 0x00000800
/* [II] Data msg op */
#define RIO_OPS_DOORBELL 0x00000400
/* [II] Doorbell op */
#define RIO_OPS_ATOMIC_TST_SWP 0x00000100
/* [I] Atomic TAS op */
#define RIO_OPS_ATOMIC_INC 0x00000080
/* [I] Atomic inc op */
#define RIO_OPS_ATOMIC_DEC 0x00000040
/* [I] Atomic dec op */
#define RIO_OPS_ATOMIC_SET 0x00000020
/* [I] Atomic set op */
#define RIO_OPS_ATOMIC_CLR 0x00000010
/* [I] Atomic clr op */
#define RIO_OPS_PORT_WRITE 0x00000004
/* [I] Port-write op */
/* 0x20-0x30 *//* Reserved */
#define RIO_SWITCH_RT_LIMIT 0x34
/* [III, 1.3] Switch Route Table Destination ID Limit CAR */
#define RIO_RT_MAX_DESTID 0x0000ffff
#define RIO_MBOX_CSR 0x40
/* [II, <= 1.2] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000
/* [II] Mbox 0 avail */
#define RIO_MBOX0_FULL 0x40000000
/* [II] Mbox 0 full */
#define RIO_MBOX0_EMPTY 0x20000000
/* [II] Mbox 0 empty */
#define RIO_MBOX0_BUSY 0x10000000
/* [II] Mbox 0 busy */
#define RIO_MBOX0_FAIL 0x08000000
/* [II] Mbox 0 fail */
#define RIO_MBOX0_ERROR 0x04000000
/* [II] Mbox 0 error */
#define RIO_MBOX1_AVAIL 0x00800000
/* [II] Mbox 1 avail */
#define RIO_MBOX1_FULL 0x00200000
/* [II] Mbox 1 full */
#define RIO_MBOX1_EMPTY 0x00200000
/* [II] Mbox 1 empty */
#define RIO_MBOX1_BUSY 0x00100000
/* [II] Mbox 1 busy */
#define RIO_MBOX1_FAIL 0x00080000
/* [II] Mbox 1 fail */
#define RIO_MBOX1_ERROR 0x00040000
/* [II] Mbox 1 error */
#define RIO_MBOX2_AVAIL 0x00008000
/* [II] Mbox 2 avail */
#define RIO_MBOX2_FULL 0x00004000
/* [II] Mbox 2 full */
#define RIO_MBOX2_EMPTY 0x00002000
/* [II] Mbox 2 empty */
#define RIO_MBOX2_BUSY 0x00001000
/* [II] Mbox 2 busy */
#define RIO_MBOX2_FAIL 0x00000800
/* [II] Mbox 2 fail */
#define RIO_MBOX2_ERROR 0x00000400
/* [II] Mbox 2 error */
#define RIO_MBOX3_AVAIL 0x00000080
/* [II] Mbox 3 avail */
#define RIO_MBOX3_FULL 0x00000040
/* [II] Mbox 3 full */
#define RIO_MBOX3_EMPTY 0x00000020
/* [II] Mbox 3 empty */
#define RIO_MBOX3_BUSY 0x00000010
/* [II] Mbox 3 busy */
#define RIO_MBOX3_FAIL 0x00000008
/* [II] Mbox 3 fail */
#define RIO_MBOX3_ERROR 0x00000004
/* [II] Mbox 3 error */
#define RIO_WRITE_PORT_CSR 0x44
/* [I, <= 1.2] Write Port CSR */
#define RIO_DOORBELL_CSR 0x44
/* [II, <= 1.2] Doorbell CSR */
#define RIO_DOORBELL_AVAIL 0x80000000
/* [II] Doorbell avail */
#define RIO_DOORBELL_FULL 0x40000000
/* [II] Doorbell full */
#define RIO_DOORBELL_EMPTY 0x20000000
/* [II] Doorbell empty */
#define RIO_DOORBELL_BUSY 0x10000000
/* [II] Doorbell busy */
#define RIO_DOORBELL_FAILED 0x08000000
/* [II] Doorbell failed */
#define RIO_DOORBELL_ERROR 0x04000000
/* [II] Doorbell error */
#define RIO_WRITE_PORT_AVAILABLE 0x00000080
/* [I] Write Port Available */
#define RIO_WRITE_PORT_FULL 0x00000040
/* [I] Write Port Full */
#define RIO_WRITE_PORT_EMPTY 0x00000020
/* [I] Write Port Empty */
#define RIO_WRITE_PORT_BUSY 0x00000010
/* [I] Write Port Busy */
#define RIO_WRITE_PORT_FAILED 0x00000008
/* [I] Write Port Failed */
#define RIO_WRITE_PORT_ERROR 0x00000004
/* [I] Write Port Error */
/* 0x48 *//* Reserved */
#define RIO_PELL_CTRL_CSR 0x4c
/* [I] PE Logical Layer Control CSR */
#define RIO_PELL_ADDR_66 0x00000004
/* [I] 66-bit addr */
#define RIO_PELL_ADDR_50 0x00000002
/* [I] 50-bit addr */
#define RIO_PELL_ADDR_34 0x00000001
/* [I] 34-bit addr */
/* 0x50-0x54 *//* Reserved */
#define RIO_LCSH_BA 0x58
/* [I] LCS High Base Address */
#define RIO_LCSL_BA 0x5c
/* [I] LCS Base Address */
#define RIO_DID_CSR 0x60
/* [III] Base Device ID CSR */
/* 0x64 *//* Reserved */
#define RIO_HOST_DID_LOCK_CSR 0x68
/* [III] Host Base Device ID Lock CSR */
#define RIO_COMPONENT_TAG_CSR 0x6c
/* [III] Component Tag CSR */
#define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70
#define RIO_STD_RTE_CONF_EXTCFGEN 0x80000000
#define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74
#define RIO_STD_RTE_DEFAULT_PORT 0x78
/* 0x7c-0xf8 *//* Reserved */
/* 0x100-0xfff8 *//* [I] Extended Features Space */
/* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */
/*
* Extended Features Space is a configuration space area where
* functionality is mapped into extended feature blocks via a
* singly linked list of extended feature pointers (EFT_PTR).
*
* Each extended feature block can be identified/located in
* Extended Features Space by walking the extended feature
* list starting with the Extended Feature Pointer located
* in the Assembly Information CAR.
*
* Extended Feature Blocks (EFBs) are identified with an assigned
* EFB ID. Extended feature block offsets in the definitions are
* relative to the offset of the EFB within the Extended Features
* Space.
*/
/* Helper macros to parse the Extended Feature Block header */
#define RIO_EFB_PTR_MASK 0xffff0000
#define RIO_EFB_ID_MASK 0x0000ffff
#define RIO_GET_BLOCK_PTR(x) ((x & RIO_EFB_PTR_MASK) >> 16)
#define RIO_GET_BLOCK_ID(x) (x & RIO_EFB_ID_MASK)
/* Extended Feature Block IDs */
#define RIO_EFB_PAR_EP_ID 0x0001
/* [IV] LP/LVDS EP Devices */
#define RIO_EFB_PAR_EP_REC_ID 0x0002
/* [IV] LP/LVDS EP Recovery Devices */
#define RIO_EFB_PAR_EP_FREE_ID 0x0003
/* [IV] LP/LVDS EP Free Devices */
#define RIO_EFB_SER_EP_ID_V13P 0x0001
/* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002
/* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003
/* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
#define RIO_EFB_SER_EP_ID 0x0004
/* [VI] LP/Serial EP Devices */
#define RIO_EFB_SER_EP_REC_ID 0x0005
/* [VI] LP/Serial EP Recovery Devices */
#define RIO_EFB_SER_EP_FREE_ID 0x0006
/* [VI] LP/Serial EP Free Devices */
#define RIO_EFB_SER_EP_FREC_ID 0x0009
/* [VI] LP/Serial EP Free Recovery Devices */
#define RIO_EFB_ERR_MGMNT 0x0007
/* [VIII] Error Management Extensions */
/*
* Physical 8/16 LP-LVDS
* ID=0x0001, Generic End Point Devices
* ID=0x0002, Generic End Point Devices, software assisted recovery option
* ID=0x0003, Generic End Point Free Devices
*
* Physical LP-Serial
* ID=0x0004, Generic End Point Devices
* ID=0x0005, Generic End Point Devices, software assisted recovery option
* ID=0x0006, Generic End Point Free Devices
*/
#define RIO_PORT_MNT_HEADER 0x0000
#define RIO_PORT_REQ_CTL_CSR 0x0020
#define RIO_PORT_RSP_CTL_CSR 0x0024
/* 0x0001/0x0002 */
#define RIO_PORT_LINKTO_CTL_CSR 0x0020
/* Serial */
#define RIO_PORT_RSPTO_CTL_CSR 0x0024
/* Serial */
#define RIO_PORT_GEN_CTL_CSR 0x003c
#define RIO_PORT_GEN_HOST 0x80000000
#define RIO_PORT_GEN_MASTER 0x40000000
#define RIO_PORT_GEN_DISCOVERED 0x20000000
#define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20)
/* 0x0002 */
#define RIO_MNT_REQ_CMD_RD 0x03
/* Reset-device command */
#define RIO_MNT_REQ_CMD_IS 0x04
/* Input-status command */
#define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20)
/* 0x0002 */
#define RIO_PORT_N_MNT_RSP_RVAL 0x80000000
/* Response Valid */
#define RIO_PORT_N_MNT_RSP_ASTAT 0x000007e0
/* ackID Status */
#define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f
/* Link Status */
#define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20)
/* 0x0002 */
#define RIO_PORT_N_ACK_CLEAR 0x80000000
#define RIO_PORT_N_ACK_INBOUND 0x3f000000
#define RIO_PORT_N_ACK_OUTSTAND 0x00003f00
#define RIO_PORT_N_ACK_OUTBOUND 0x0000003f
#define RIO_PORT_N_CTL2_CSR(x) (0x0054 + x*0x20)
#define RIO_PORT_N_CTL2_SEL_BAUD 0xf0000000
#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20)
#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000
/* Output Error-stopped */
#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100
/* Input Error-stopped */
#define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010
/* Port-Write Pending */
#define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004
#define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002
#define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001
#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20)
#define RIO_PORT_N_CTL_PWIDTH 0xc0000000
#define RIO_PORT_N_CTL_PWIDTH_1 0x00000000
#define RIO_PORT_N_CTL_PWIDTH_4 0x40000000
#define RIO_PORT_N_CTL_IPW 0x38000000
/* Initialized Port Width */
#define RIO_PORT_N_CTL_P_TYP_SER 0x00000001
#define RIO_PORT_N_CTL_LOCKOUT 0x00000002
#define RIO_PORT_N_CTL_EN_RX_SER 0x00200000
#define RIO_PORT_N_CTL_EN_TX_SER 0x00400000
#define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000
#define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000
/*
* Error Management Extensions (RapidIO 1.3+, Part 8)
*
* Extended Features Block ID=0x0007
*/
/* General EM Registers (Common for all Ports) */
#define RIO_EM_EFB_HEADER 0x000
/* Error Management Extensions Block Header */
#define RIO_EM_LTL_ERR_DETECT 0x008
/* Logical/Transport Layer Error Detect CSR */
#define RIO_EM_LTL_ERR_EN 0x00c
/* Logical/Transport Layer Error Enable CSR */
#define REM_LTL_ERR_ILLTRAN 0x08000000
/* Illegal Transaction decode */
#define REM_LTL_ERR_UNSOLR 0x00800000
/* Unsolicited Response */
#define REM_LTL_ERR_UNSUPTR 0x00400000
/* Unsupported Transaction */
#define REM_LTL_ERR_IMPSPEC 0x000000ff
/* Implementation Specific */
#define RIO_EM_LTL_HIADDR_CAP 0x010
/* Logical/Transport Layer High Address Capture CSR */
#define RIO_EM_LTL_ADDR_CAP 0x014
/* Logical/Transport Layer Address Capture CSR */
#define RIO_EM_LTL_DEVID_CAP 0x018
/* Logical/Transport Layer Device ID Capture CSR */
#define RIO_EM_LTL_CTRL_CAP 0x01c
/* Logical/Transport Layer Control Capture CSR */
#define RIO_EM_PW_TGT_DEVID 0x028
/* Port-write Target deviceID CSR */
#define RIO_EM_PKT_TTL 0x02c
/* Packet Time-to-live CSR */
/* Per-Port EM Registers */
#define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40)
/* Port N Error Detect CSR */
#define REM_PED_IMPL_SPEC 0x80000000
#define REM_PED_LINK_TO 0x00000001
#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40)
/* Port N Error Rate Enable CSR */
#define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40)
/* Port N Attributes Capture CSR */
#define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40)
/* Port N Packet/Control Symbol Capture 0 CSR */
#define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40)
/* Port N Packet Capture 1 CSR */
#define RIO_EM_PN_PKT_CAP_2(x) (0x054 + x*0x40)
/* Port N Packet Capture 2 CSR */
#define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40)
/* Port N Packet Capture 3 CSR */
#define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40)
/* Port N Error Rate CSR */
#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40)
/* Port N Error Rate Threshold CSR */
#endif /* LINUX_RIO_REGS_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| matt porter | matt porter | 709 | 65.95% | 2 | 16.67% |
| alexandre bounine | alexandre bounine | 346 | 32.19% | 9 | 75.00% |
| thomas moll | thomas moll | 20 | 1.86% | 1 | 8.33% |
| Total | 1075 | 100.00% | 12 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.