Release 4.7 include/linux/ssb/ssb_regs.h
#ifndef LINUX_SSB_REGS_H_
#define LINUX_SSB_REGS_H_
/* SiliconBackplane Address Map.
* All regions may not exist on all chips.
*/
#define SSB_SDRAM_BASE 0x00000000U
/* Physical SDRAM */
#define SSB_PCI_MEM 0x08000000U
/* Host Mode sb2pcitranslation0 (64 MB) */
#define SSB_PCI_CFG 0x0c000000U
/* Host Mode sb2pcitranslation1 (64 MB) */
#define SSB_SDRAM_SWAPPED 0x10000000U
/* Byteswapped Physical SDRAM */
#define SSB_ENUM_BASE 0x18000000U
/* Enumeration space base */
#define SSB_ENUM_LIMIT 0x18010000U
/* Enumeration space limit */
#define SSB_FLASH2 0x1c000000U
/* Flash Region 2 (region 1 shadowed here) */
#define SSB_FLASH2_SZ 0x02000000U
/* Size of Flash Region 2 */
#define SSB_EXTIF_BASE 0x1f000000U
/* External Interface region base address */
#define SSB_FLASH1 0x1fc00000U
/* Flash Region 1 */
#define SSB_FLASH1_SZ 0x00400000U
/* Size of Flash Region 1 */
#define SSB_PCI_DMA 0x40000000U
/* Client Mode sb2pcitranslation2 (1 GB) */
#define SSB_PCI_DMA_SZ 0x40000000U
/* Client Mode sb2pcitranslation2 size in bytes */
#define SSB_PCIE_DMA_L32 0x00000000U
/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
#define SSB_PCIE_DMA_H32 0x80000000U
/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000)
#define SSB_LED (SSB_EXTIF_BASE + 0x00900000)
/* Enumeration space constants */
#define SSB_CORE_SIZE 0x1000
/* Size of a core MMIO area */
#define SSB_MAX_NR_CORES ((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
/* mips address */
#define SSB_EJTAG 0xff200000
/* MIPS EJTAG space (2M) */
/* SSB PCI config space registers. */
#define SSB_PMCSR 0x44
#define SSB_PE 0x100
#define SSB_BAR0_WIN 0x80
/* Backplane address space 0 */
#define SSB_BAR1_WIN 0x84
/* Backplane address space 1 */
#define SSB_SPROMCTL 0x88
/* SPROM control */
#define SSB_SPROMCTL_WE 0x10
/* SPROM write enable */
#define SSB_BAR1_CONTROL 0x8c
/* Address space 1 burst control */
#define SSB_PCI_IRQS 0x90
/* PCI interrupts */
#define SSB_PCI_IRQMASK 0x94
/* PCI IRQ control and mask (pcirev >= 6 only) */
#define SSB_BACKPLANE_IRQS 0x98
/* Backplane Interrupts */
#define SSB_GPIO_IN 0xB0
/* GPIO Input (pcirev >= 3 only) */
#define SSB_GPIO_OUT 0xB4
/* GPIO Output (pcirev >= 3 only) */
#define SSB_GPIO_OUT_ENABLE 0xB8
/* GPIO Output Enable/Disable (pcirev >= 3 only) */
#define SSB_GPIO_SCS 0x10
/* PCI config space bit 4 for 4306c0 slow clock source */
#define SSB_GPIO_HWRAD 0x20
/* PCI config space GPIO 13 for hw radio disable */
#define SSB_GPIO_XTAL 0x40
/* PCI config space GPIO 14 for Xtal powerup */
#define SSB_GPIO_PLL 0x80
/* PCI config space GPIO 15 for PLL powerdown */
#define SSB_BAR0_MAX_RETRIES 50
/* Silicon backplane configuration register definitions */
#define SSB_IPSFLAG 0x0F08
#define SSB_IPSFLAG_IRQ1 0x0000003F
/* which sbflags get routed to mips interrupt 1 */
#define SSB_IPSFLAG_IRQ1_SHIFT 0
#define SSB_IPSFLAG_IRQ2 0x00003F00
/* which sbflags get routed to mips interrupt 2 */
#define SSB_IPSFLAG_IRQ2_SHIFT 8
#define SSB_IPSFLAG_IRQ3 0x003F0000
/* which sbflags get routed to mips interrupt 3 */
#define SSB_IPSFLAG_IRQ3_SHIFT 16
#define SSB_IPSFLAG_IRQ4 0x3F000000
/* which sbflags get routed to mips interrupt 4 */
#define SSB_IPSFLAG_IRQ4_SHIFT 24
#define SSB_TPSFLAG 0x0F18
#define SSB_TPSFLAG_BPFLAG 0x0000003F
/* Backplane flag # */
#define SSB_TPSFLAG_ALWAYSIRQ 0x00000040
/* IRQ is always sent on the Backplane */
#define SSB_TMERRLOGA 0x0F48
#define SSB_TMERRLOG 0x0F50
#define SSB_ADMATCH3 0x0F60
#define SSB_ADMATCH2 0x0F68
#define SSB_ADMATCH1 0x0F70
#define SSB_IMSTATE 0x0F90
/* SB Initiator Agent State */
#define SSB_IMSTATE_PC 0x0000000f
/* Pipe Count */
#define SSB_IMSTATE_AP_MASK 0x00000030
/* Arbitration Priority */
#define SSB_IMSTATE_AP_BOTH 0x00000000
/* Use both timeslices and token */
#define SSB_IMSTATE_AP_TS 0x00000010
/* Use timeslices only */
#define SSB_IMSTATE_AP_TK 0x00000020
/* Use token only */
#define SSB_IMSTATE_AP_RSV 0x00000030
/* Reserved */
#define SSB_IMSTATE_IBE 0x00020000
/* In Band Error */
#define SSB_IMSTATE_TO 0x00040000
/* Timeout */
#define SSB_IMSTATE_BUSY 0x01800000
/* Busy (Backplane rev >= 2.3 only) */
#define SSB_IMSTATE_REJECT 0x02000000
/* Reject (Backplane rev >= 2.3 only) */
#define SSB_INTVEC 0x0F94
/* SB Interrupt Mask */
#define SSB_INTVEC_PCI 0x00000001
/* Enable interrupts for PCI */
#define SSB_INTVEC_ENET0 0x00000002
/* Enable interrupts for enet 0 */
#define SSB_INTVEC_ILINE20 0x00000004
/* Enable interrupts for iline20 */
#define SSB_INTVEC_CODEC 0x00000008
/* Enable interrupts for v90 codec */
#define SSB_INTVEC_USB 0x00000010
/* Enable interrupts for usb */
#define SSB_INTVEC_EXTIF 0x00000020
/* Enable interrupts for external i/f */
#define SSB_INTVEC_ENET1 0x00000040
/* Enable interrupts for enet 1 */
#define SSB_TMSLOW 0x0F98
/* SB Target State Low */
#define SSB_TMSLOW_RESET 0x00000001
/* Reset */
#define SSB_TMSLOW_REJECT 0x00000002
/* Reject (Standard Backplane) */
#define SSB_TMSLOW_REJECT_23 0x00000004
/* Reject (Backplane rev 2.3) */
#define SSB_TMSLOW_CLOCK 0x00010000
/* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000
/* Force Gated Clocks On */
#define SSB_TMSLOW_PE 0x40000000
/* Power Management Enable */
#define SSB_TMSLOW_BE 0x80000000
/* BIST Enable */
#define SSB_TMSHIGH 0x0F9C
/* SB Target State High */
#define SSB_TMSHIGH_SERR 0x00000001
/* S-error */
#define SSB_TMSHIGH_INT 0x00000002
/* Interrupt */
#define SSB_TMSHIGH_BUSY 0x00000004
/* Busy */
#define SSB_TMSHIGH_TO 0x00000020
/* Timeout. Backplane rev >= 2.3 only */
#define SSB_TMSHIGH_COREFL 0x1FFF0000
/* Core specific flags */
#define SSB_TMSHIGH_COREFL_SHIFT 16
#define SSB_TMSHIGH_DMA64 0x10000000
/* 64bit DMA supported */
#define SSB_TMSHIGH_GCR 0x20000000
/* Gated Clock Request */
#define SSB_TMSHIGH_BISTF 0x40000000
/* BIST Failed */
#define SSB_TMSHIGH_BISTD 0x80000000
/* BIST Done */
#define SSB_BWA0 0x0FA0
#define SSB_IMCFGLO 0x0FA8
#define SSB_IMCFGLO_SERTO 0x00000007
/* Service timeout */
#define SSB_IMCFGLO_REQTO 0x00000070
/* Request timeout */
#define SSB_IMCFGLO_REQTO_SHIFT 4
#define SSB_IMCFGLO_CONNID 0x00FF0000
/* Connection ID */
#define SSB_IMCFGLO_CONNID_SHIFT 16
#define SSB_IMCFGHI 0x0FAC
#define SSB_ADMATCH0 0x0FB0
#define SSB_TMCFGLO 0x0FB8
#define SSB_TMCFGHI 0x0FBC
#define SSB_BCONFIG 0x0FC0
#define SSB_BSTATE 0x0FC8
#define SSB_ACTCFG 0x0FD8
#define SSB_FLAGST 0x0FE8
#define SSB_IDLOW 0x0FF8
#define SSB_IDLOW_CFGSP 0x00000003
/* Config Space */
#define SSB_IDLOW_ADDRNGE 0x00000038
/* Address Ranges supported */
#define SSB_IDLOW_ADDRNGE_SHIFT 3
#define SSB_IDLOW_SYNC 0x00000040
#define SSB_IDLOW_INITIATOR 0x00000080
#define SSB_IDLOW_MIBL 0x00000F00
/* Minimum Backplane latency */
#define SSB_IDLOW_MIBL_SHIFT 8
#define SSB_IDLOW_MABL 0x0000F000
/* Maximum Backplane latency */
#define SSB_IDLOW_MABL_SHIFT 12
#define SSB_IDLOW_TIF 0x00010000
/* This Initiator is first */
#define SSB_IDLOW_CCW 0x000C0000
/* Cycle counter width */
#define SSB_IDLOW_CCW_SHIFT 18
#define SSB_IDLOW_TPT 0x00F00000
/* Target ports */
#define SSB_IDLOW_TPT_SHIFT 20
#define SSB_IDLOW_INITP 0x0F000000
/* Initiator ports */
#define SSB_IDLOW_INITP_SHIFT 24
#define SSB_IDLOW_SSBREV 0xF0000000
/* Sonics Backplane Revision code */
#define SSB_IDLOW_SSBREV_22 0x00000000
/* <= 2.2 */
#define SSB_IDLOW_SSBREV_23 0x10000000
/* 2.3 */
#define SSB_IDLOW_SSBREV_24 0x40000000
/* ?? Found in BCM4328 */
#define SSB_IDLOW_SSBREV_25 0x50000000
/* ?? Not Found yet */
#define SSB_IDLOW_SSBREV_26 0x60000000
/* ?? Found in some BCM4311/2 */
#define SSB_IDLOW_SSBREV_27 0x70000000
/* ?? Found in some BCM4311/2 */
#define SSB_IDHIGH 0x0FFC
/* SB Identification High */
#define SSB_IDHIGH_RCLO 0x0000000F
/* Revision Code (low part) */
#define SSB_IDHIGH_CC 0x00008FF0
/* Core Code */
#define SSB_IDHIGH_CC_SHIFT 4
#define SSB_IDHIGH_RCHI 0x00007000
/* Revision Code (high part) */
#define SSB_IDHIGH_RCHI_SHIFT 8
/* yes, shift 8 is right */
#define SSB_IDHIGH_VC 0xFFFF0000
/* Vendor Code */
#define SSB_IDHIGH_VC_SHIFT 16
/* SPROM shadow area. If not otherwise noted, fields are
* two bytes wide. Note that the SPROM can _only_ be read
* in two-byte quantities.
*/
#define SSB_SPROMSIZE_WORDS 64
#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
#define SSB_SPROMSIZE_WORDS_R123 64
#define SSB_SPROMSIZE_WORDS_R4 220
#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
#define SSB_SPROMSIZE_WORDS_R10 230
#define SSB_SPROMSIZE_WORDS_R11 234
#define SSB_SPROM_BASE1 0x1000
#define SSB_SPROM_BASE31 0x0800
#define SSB_SPROM_REVISION 0x007E
#define SSB_SPROM_REVISION_REV 0x00FF
/* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00
/* SPROM CRC8 value */
#define SSB_SPROM_REVISION_CRC_SHIFT 8
/* SPROM Revision 1 */
#define SSB_SPROM1_SPID 0x0004
/* Subsystem Product ID for PCI */
#define SSB_SPROM1_SVID 0x0006
/* Subsystem Vendor ID for PCI */
#define SSB_SPROM1_PID 0x0008
/* Product ID for PCI */
#define SSB_SPROM1_IL0MAC 0x0048
/* 6 bytes MAC address for 802.11b/g */
#define SSB_SPROM1_ET0MAC 0x004E
/* 6 bytes MAC address for Ethernet */
#define SSB_SPROM1_ET1MAC 0x0054
/* 6 bytes MAC address for 802.11a */
#define SSB_SPROM1_ETHPHY 0x005A
/* Ethernet PHY settings */
#define SSB_SPROM1_ETHPHY_ET0A 0x001F
/* MII Address for enet0 */
#define SSB_SPROM1_ETHPHY_ET1A 0x03E0
/* MII Address for enet1 */
#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM1_ETHPHY_ET0M (1<<14)
/* MDIO for enet0 */
#define SSB_SPROM1_ETHPHY_ET1M (1<<15)
/* MDIO for enet1 */
#define SSB_SPROM1_BINF 0x005C
/* Board info */
#define SSB_SPROM1_BINF_BREV 0x00FF
/* Board Revision */
#define SSB_SPROM1_BINF_CCODE 0x0F00
/* Country Code */
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
#define SSB_SPROM1_BINF_ANTBG 0x3000
/* Available B-PHY and G-PHY antennas */
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
#define SSB_SPROM1_BINF_ANTA 0xC000
/* Available A-PHY antennas */
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
#define SSB_SPROM1_PA0B0 0x005E
#define SSB_SPROM1_PA0B1 0x0060
#define SSB_SPROM1_PA0B2 0x0062
#define SSB_SPROM1_GPIOA 0x0064
/* General Purpose IO pins 0 and 1 */
#define SSB_SPROM1_GPIOA_P0 0x00FF
/* Pin 0 */
#define SSB_SPROM1_GPIOA_P1 0xFF00
/* Pin 1 */
#define SSB_SPROM1_GPIOA_P1_SHIFT 8
#define SSB_SPROM1_GPIOB 0x0066
/* General Purpuse IO pins 2 and 3 */
#define SSB_SPROM1_GPIOB_P2 0x00FF
/* Pin 2 */
#define SSB_SPROM1_GPIOB_P3 0xFF00
/* Pin 3 */
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
#define SSB_SPROM1_MAXPWR 0x0068
/* Power Amplifier Max Power */
#define SSB_SPROM1_MAXPWR_BG 0x00FF
/* B-PHY and G-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A 0xFF00
/* A-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
#define SSB_SPROM1_PA1B0 0x006A
#define SSB_SPROM1_PA1B1 0x006C
#define SSB_SPROM1_PA1B2 0x006E
#define SSB_SPROM1_ITSSI 0x0070
/* Idle TSSI Target */
#define SSB_SPROM1_ITSSI_BG 0x00FF
/* B-PHY and G-PHY*/
#define SSB_SPROM1_ITSSI_A 0xFF00
/* A-PHY */
#define SSB_SPROM1_ITSSI_A_SHIFT 8
#define SSB_SPROM1_BFLLO 0x0072
/* Boardflags (low 16 bits) */
#define SSB_SPROM1_AGAIN 0x0074
/* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM1_AGAIN_BG 0x00FF
/* B-PHY and G-PHY */
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00
/* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
#define SSB_SPROM1_CCODE 0x0076
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x0038
/* Boardflags (high 16 bits) */
#define SSB_SPROM2_MAXP_A 0x003A
/* A-PHY Max Power */
#define SSB_SPROM2_MAXP_A_HI 0x00FF
/* Max Power High */
#define SSB_SPROM2_MAXP_A_LO 0xFF00
/* Max Power Low */
#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
#define SSB_SPROM2_PA1LOB0 0x003C
/* A-PHY PowerAmplifier Low Settings */
#define SSB_SPROM2_PA1LOB1 0x003E
/* A-PHY PowerAmplifier Low Settings */
#define SSB_SPROM2_PA1LOB2 0x0040
/* A-PHY PowerAmplifier Low Settings */
#define SSB_SPROM2_PA1HIB0 0x0042
/* A-PHY PowerAmplifier High Settings */
#define SSB_SPROM2_PA1HIB1 0x0044
/* A-PHY PowerAmplifier High Settings */
#define SSB_SPROM2_PA1HIB2 0x0046
/* A-PHY PowerAmplifier High Settings */
#define SSB_SPROM2_OPO 0x0078
/* OFDM Power Offset from CCK Level */
#define SSB_SPROM2_OPO_VALUE 0x00FF
#define SSB_SPROM2_OPO_UNUSED 0xFF00
#define SSB_SPROM2_CCODE 0x007C
/* Two char Country Code */
/* SPROM Revision 3 (inherits most data from rev 2) */
#define SSB_SPROM3_OFDMAPO 0x002C
/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
#define SSB_SPROM3_OFDMALPO 0x0030
/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
#define SSB_SPROM3_OFDMAHPO 0x0034
/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
#define SSB_SPROM3_GPIOLDC 0x0042
/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00
/* Off Count */
#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000
/* On Count */
#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
#define SSB_SPROM3_IL0MAC 0x004A
/* 6 bytes MAC address for 802.11b/g */
#define SSB_SPROM3_CCKPO 0x0078
/* CCK Power Offset */
#define SSB_SPROM3_CCKPO_1M 0x000F
/* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0
/* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
#define SSB_SPROM3_CCKPO_55M 0x0F00
/* 5.5M Rate PO */
#define SSB_SPROM3_CCKPO_55M_SHIFT 8
#define SSB_SPROM3_CCKPO_11M 0xF000
/* 11M Rate PO */
#define SSB_SPROM3_CCKPO_11M_SHIFT 12
#define SSB_SPROM3_OFDMGPO 0x107A
/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
#define SSB_SPROM4_BOARDREV 0x0042
/* Board revision */
#define SSB_SPROM4_BFLLO 0x0044
/* Boardflags (low 16 bits) */
#define SSB_SPROM4_BFLHI 0x0046
/* Board Flags Hi */
#define SSB_SPROM4_BFL2LO 0x0048
/* Board flags 2 (low 16 bits) */
#define SSB_SPROM4_BFL2HI 0x004A
/* Board flags 2 Hi */
#define SSB_SPROM4_IL0MAC 0x004C
/* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM4_CCODE 0x0052
/* Country Code (2 bytes) */
#define SSB_SPROM4_GPIOA 0x0056
/* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM4_GPIOA_P0 0x00FF
/* Pin 0 */
#define SSB_SPROM4_GPIOA_P1 0xFF00
/* Pin 1 */
#define SSB_SPROM4_GPIOA_P1_SHIFT 8
#define SSB_SPROM4_GPIOB 0x0058
/* Gen. Purpose IO # 2 and 3 */
#define SSB_SPROM4_GPIOB_P2 0x00FF
/* Pin 2 */
#define SSB_SPROM4_GPIOB_P3 0xFF00
/* Pin 3 */
#define SSB_SPROM4_GPIOB_P3_SHIFT 8
#define SSB_SPROM4_ETHPHY 0x005A
/* Ethernet PHY settings ?? */
#define SSB_SPROM4_ETHPHY_ET0A 0x001F
/* MII Address for enet0 */
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0
/* MII Address for enet1 */
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14)
/* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15)
/* MDIO for enet1 */
#define SSB_SPROM4_ANTAVAIL 0x005C
/* Antenna available bitfields */
#define SSB_SPROM4_ANTAVAIL_BG 0x00FF
/* B-PHY and G-PHY bitfield */
#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
#define SSB_SPROM4_ANTAVAIL_A 0xFF00
/* A-PHY bitfield */
#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
#define SSB_SPROM4_AGAIN01 0x005E
/* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF
/* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
#define SSB_SPROM4_AGAIN1 0xFF00
/* Antenna 1 */
#define SSB_SPROM4_AGAIN1_SHIFT 8
#define SSB_SPROM4_AGAIN23 0x0060
#define SSB_SPROM4_AGAIN2 0x00FF
/* Antenna 2 */
#define SSB_SPROM4_AGAIN2_SHIFT 0
#define SSB_SPROM4_AGAIN3 0xFF00
/* Antenna 3 */
#define SSB_SPROM4_AGAIN3_SHIFT 8
#define SSB_SPROM4_TXPID2G01 0x0062
/* TX Power Index 2GHz */
#define SSB_SPROM4_TXPID2G0 0x00FF
#define SSB_SPROM4_TXPID2G0_SHIFT 0
#define SSB_SPROM4_TXPID2G1 0xFF00
#define SSB_SPROM4_TXPID2G1_SHIFT 8
#define SSB_SPROM4_TXPID2G23 0x0064
/* TX Power Index 2GHz */
#define SSB_SPROM4_TXPID2G2 0x00FF
#define SSB_SPROM4_TXPID2G2_SHIFT 0
#define SSB_SPROM4_TXPID2G3 0xFF00
#define SSB_SPROM4_TXPID2G3_SHIFT 8
#define SSB_SPROM4_TXPID5G01 0x0066
/* TX Power Index 5GHz middle subband */
#define SSB_SPROM4_TXPID5G0 0x00FF
#define SSB_SPROM4_TXPID5G0_SHIFT 0
#define SSB_SPROM4_TXPID5G1 0xFF00
#define SSB_SPROM4_TXPID5G1_SHIFT 8
#define SSB_SPROM4_TXPID5G23 0x0068
/* TX Power Index 5GHz middle subband */
#define SSB_SPROM4_TXPID5G2 0x00FF
#define SSB_SPROM4_TXPID5G2_SHIFT 0
#define SSB_SPROM4_TXPID5G3 0xFF00
#define SSB_SPROM4_TXPID5G3_SHIFT 8
#define SSB_SPROM4_TXPID5GL01 0x006A
/* TX Power Index 5GHz low subband */
#define SSB_SPROM4_TXPID5GL0 0x00FF
#define SSB_SPROM4_TXPID5GL0_SHIFT 0
#define SSB_SPROM4_TXPID5GL1 0xFF00
#define SSB_SPROM4_TXPID5GL1_SHIFT 8
#define SSB_SPROM4_TXPID5GL23 0x006C
/* TX Power Index 5GHz low subband */
#define SSB_SPROM4_TXPID5GL2 0x00FF
#define SSB_SPROM4_TXPID5GL2_SHIFT 0
#define SSB_SPROM4_TXPID5GL3 0xFF00
#define SSB_SPROM4_TXPID5GL3_SHIFT 8
#define SSB_SPROM4_TXPID5GH01 0x006E
/* TX Power Index 5GHz high subband */
#define SSB_SPROM4_TXPID5GH0 0x00FF
#define SSB_SPROM4_TXPID5GH0_SHIFT 0
#define SSB_SPROM4_TXPID5GH1 0xFF00
#define SSB_SPROM4_TXPID5GH1_SHIFT 8
#define SSB_SPROM4_TXPID5GH23 0x0070
/* TX Power Index 5GHz high subband */
#define SSB_SPROM4_TXPID5GH2 0x00FF
#define SSB_SPROM4_TXPID5GH2_SHIFT 0
#define SSB_SPROM4_TXPID5GH3 0xFF00
#define SSB_SPROM4_TXPID5GH3_SHIFT 8
/* There are 4 blocks with power info sharing the same layout */
#define SSB_SPROM4_PWR_INFO_CORE0 0x0080
#define SSB_SPROM4_PWR_INFO_CORE1 0x00AE
#define SSB_SPROM4_PWR_INFO_CORE2 0x00DC
#define SSB_SPROM4_PWR_INFO_CORE3 0x010A
#define SSB_SPROM4_2G_MAXP_ITSSI 0x00
/* 2 GHz ITSSI and 2 GHz Max Power */
#define SSB_SPROM4_2G_MAXP 0x00FF
#define SSB_SPROM4_2G_ITSSI 0xFF00
#define SSB_SPROM4_2G_ITSSI_SHIFT 8
#define SSB_SPROM4_2G_PA_0 0x02
/* 2 GHz power amp */
#define SSB_SPROM4_2G_PA_1 0x04
#define SSB_SPROM4_2G_PA_2 0x06
#define SSB_SPROM4_2G_PA_3 0x08
#define SSB_SPROM4_5G_MAXP_ITSSI 0x0A
/* 5 GHz ITSSI and 5.3 GHz Max Power */
#define SSB_SPROM4_5G_MAXP 0x00FF
#define SSB_SPROM4_5G_ITSSI 0xFF00
#define SSB_SPROM4_5G_ITSSI_SHIFT 8
#define SSB_SPROM4_5GHL_MAXP 0x0C
/* 5.2 GHz and 5.8 GHz Max Power */
#define SSB_SPROM4_5GH_MAXP 0x00FF
#define SSB_SPROM4_5GL_MAXP 0xFF00
#define SSB_SPROM4_5GL_MAXP_SHIFT 8
#define SSB_SPROM4_5G_PA_0 0x0E
/* 5.3 GHz power amp */
#define SSB_SPROM4_5G_PA_1 0x10
#define SSB_SPROM4_5G_PA_2 0x12
#define SSB_SPROM4_5G_PA_3 0x14
#define SSB_SPROM4_5GL_PA_0 0x16
/* 5.2 GHz power amp */
#define SSB_SPROM4_5GL_PA_1 0x18
#define SSB_SPROM4_5GL_PA_2 0x1A
#define SSB_SPROM4_5GL_PA_3 0x1C
#define SSB_SPROM4_5GH_PA_0 0x1E
/* 5.8 GHz power amp */
#define SSB_SPROM4_5GH_PA_1 0x20
#define SSB_SPROM4_5GH_PA_2 0x22
#define SSB_SPROM4_5GH_PA_3 0x24
/* TODO: Make it deprecated */
#define SSB_SPROM4_MAXP_BG 0x0080
/* Max Power BG in path 1 */
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF
/* Mask for Max Power BG */
#define SSB_SPROM4_ITSSI_BG 0xFF00
/* Mask for path 1 itssi_bg */
#define SSB_SPROM4_ITSSI_BG_SHIFT 8
#define SSB_SPROM4_MAXP_A 0x008A
/* Max Power A in path 1 */
#define SSB_SPROM4_MAXP_A_MASK 0x00FF
/* Mask for Max Power A */
#define SSB_SPROM4_ITSSI_A 0xFF00
/* Mask for path 1 itssi_a */
#define SSB_SPROM4_ITSSI_A_SHIFT 8
#define SSB_SPROM4_PA0B0 0x0082
/* The paXbY locations are */
#define SSB_SPROM4_PA0B1 0x0084
/* only guesses */
#define SSB_SPROM4_PA0B2 0x0086
#define SSB_SPROM4_PA1B0 0x008E
#define SSB_SPROM4_PA1B1 0x0090
#define SSB_SPROM4_PA1B2 0x0092
/* SPROM Revision 5 (inherits most data from rev 4) */
#define SSB_SPROM5_CCODE 0x0044
/* Country Code (2 bytes) */
#define SSB_SPROM5_BFLLO 0x004A
/* Boardflags (low 16 bits) */
#define SSB_SPROM5_BFLHI 0x004C
/* Board Flags Hi */
#define SSB_SPROM5_BFL2LO 0x004E
/* Board flags 2 (low 16 bits) */
#define SSB_SPROM5_BFL2HI 0x0050
/* Board flags 2 Hi */
#define SSB_SPROM5_IL0MAC 0x0052
/* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM5_GPIOA 0x0076
/* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF
/* Pin 0 */
#define SSB_SPROM5_GPIOA_P1 0xFF00
/* Pin 1 */
#define SSB_SPROM5_GPIOA_P1_SHIFT 8
#define SSB_SPROM5_GPIOB 0x0078
/* Gen. Purpose IO # 2 and 3 */
#define SSB_SPROM5_GPIOB_P2 0x00FF
/* Pin 2 */
#define SSB_SPROM5_GPIOB_P3 0xFF00
/* Pin 3 */
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
/* SPROM Revision 8 */
#define SSB_SPROM8_BOARDREV 0x0082
/* Board revision */
#define SSB_SPROM8_BFLLO 0x0084
/* Board flags (bits 0-15) */
#define SSB_SPROM8_BFLHI 0x0086
/* Board flags (bits 16-31) */
#define SSB_SPROM8_BFL2LO 0x0088
/* Board flags (bits 32-47) */
#define SSB_SPROM8_BFL2HI 0x008A
/* Board flags (bits 48-63) */
#define SSB_SPROM8_IL0MAC 0x008C
/* 6 byte MAC address */
#define SSB_SPROM8_CCODE 0x0092
/* 2 byte country code */
#define SSB_SPROM8_GPIOA 0x0096
/*Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM8_GPIOA_P0 0x00FF
/* Pin 0 */
#define SSB_SPROM8_GPIOA_P1 0xFF00
/* Pin 1 */
#define SSB_SPROM8_GPIOA_P1_SHIFT 8
#define SSB_SPROM8_GPIOB 0x0098
/* Gen. Purpose IO # 2 and 3 */
#define SSB_SPROM8_GPIOB_P2 0x00FF
/* Pin 2 */
#define SSB_SPROM8_GPIOB_P3 0xFF00
/* Pin 3 */
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
#define SSB_SPROM8_LEDDC 0x009A
#define SSB_SPROM8_LEDDC_ON 0xFF00
/* oncount */
#define SSB_SPROM8_LEDDC_ON_SHIFT 8
#define SSB_SPROM8_LEDDC_OFF 0x00FF
/* offcount */
#define SSB_SPROM8_LEDDC_OFF_SHIFT 0
#define SSB_SPROM8_ANTAVAIL 0x009C
/* Antenna available bitfields*/
#define SSB_SPROM8_ANTAVAIL_A 0xFF00
/* A-PHY bitfield */
#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
#define SSB_SPROM8_ANTAVAIL_BG 0x00FF
/* B-PHY and G-PHY bitfield */
#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
#define SSB_SPROM8_AGAIN01 0x009E
/* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM8_AGAIN0 0x00FF
/* Antenna 0 */
#define SSB_SPROM8_AGAIN0_SHIFT 0
#define SSB_SPROM8_AGAIN1 0xFF00
/* Antenna 1 */
#define SSB_SPROM8_AGAIN1_SHIFT 8
#define SSB_SPROM8_AGAIN23 0x00A0
#define SSB_SPROM8_AGAIN2 0x00FF
/* Antenna 2 */
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00
/* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
#define SSB_SPROM8_TXRXC 0x00A2
#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f
#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0
#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0
#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4
#define SSB_SPROM8_TXRXC_SWITCH 0xff00
#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8
#define SSB_SPROM8_RSSIPARM2G 0x00A4
/* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
#define SSB_SPROM8_RSSISMC2G_SHIFT 4
#define SSB_SPROM8_RSSISAV2G 0x0700
#define SSB_SPROM8_RSSISAV2G_SHIFT 8
#define SSB_SPROM8_BXA2G 0x1800
#define SSB_SPROM8_BXA2G_SHIFT 11
#define SSB_SPROM8_RSSIPARM5G 0x00A6
/* RSSI params for 5GHz */
#define SSB_SPROM8_RSSISMF5G 0x000F
#define SSB_SPROM8_RSSISMC5G 0x00F0
#define SSB_SPROM8_RSSISMC5G_SHIFT 4
#define SSB_SPROM8_RSSISAV5G 0x0700
#define SSB_SPROM8_RSSISAV5G_SHIFT 8
#define SSB_SPROM8_BXA5G 0x1800
#define SSB_SPROM8_BXA5G_SHIFT 11
#define SSB_SPROM8_TRI25G 0x00A8
/* TX isolation 2.4&5.3GHz */
#define SSB_SPROM8_TRI2G 0x00FF
/* TX isolation 2.4GHz */
#define SSB_SPROM8_TRI5G 0xFF00
/* TX isolation 5.3GHz */
#define SSB_SPROM8_TRI5G_SHIFT 8
#define SSB_SPROM8_TRI5GHL 0x00AA
/* TX isolation 5.2/5.8GHz */
#define SSB_SPROM8_TRI5GL 0x00FF
/* TX isolation 5.2GHz */
#define SSB_SPROM8_TRI5GH 0xFF00
/* TX isolation 5.8GHz */
#define SSB_SPROM8_TRI5GH_SHIFT 8
#define SSB_SPROM8_RXPO 0x00AC
/* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF
/* 2GHz RX power offset */
#define SSB_SPROM8_RXPO2G_SHIFT 0
#define SSB_SPROM8_RXPO5G 0xFF00
/* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
#define SSB_SPROM8_FEM2G 0x00AE
#define SSB_SPROM8_FEM5G 0x00B0
#define SSB_SROM8_FEM_TSSIPOS 0x0001
#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0
#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006
#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1
#define SSB_SROM8_FEM_PDET_RANGE 0x00F8
#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3
#define SSB_SROM8_FEM_TR_ISO 0x0700
#define SSB_SROM8_FEM_TR_ISO_SHIFT 8
#define SSB_SROM8_FEM_ANTSWLUT 0xF800
#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
#define SSB_SPROM8_THERMAL 0x00B2
#define SSB_SPROM8_THERMAL_OFFSET 0x00ff
#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0
#define SSB_SPROM8_THERMAL_TRESH 0xff00
#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8
/* Temp sense related entries */
#define SSB_SPROM8_RAWTS 0x00B4
#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff
#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0
#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00
#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9
#define SSB_SPROM8_OPT_CORRX 0x00B6
#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff
#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0
#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00
#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10
#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300
#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8
/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
#define SSB_SPROM8_HWIQ_IQSWP 0x00B8
#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f
#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0
#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010
#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
#define SSB_SPROM8_TEMPDELTA 0x00BC
#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8
#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000
#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12
/* There are 4 blocks with power info sharing the same layout */
#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
#define SSB_SROM8_PWR_INFO_CORE2 0x0100
#define SSB_SROM8_PWR_INFO_CORE3 0x0120
#define SSB_SROM8_2G_MAXP_ITSSI 0x00
#define SSB_SPROM8_2G_MAXP 0x00FF
#define SSB_SPROM8_2G_ITSSI 0xFF00
#define SSB_SPROM8_2G_ITSSI_SHIFT 8
#define SSB_SROM8_2G_PA_0 0x02
/* 2GHz power amp settings */
#define SSB_SROM8_2G_PA_1 0x04
#define SSB_SROM8_2G_PA_2 0x06
#define SSB_SROM8_5G_MAXP_ITSSI 0x08
/* 5GHz ITSSI and 5.3GHz Max Power */
#define SSB_SPROM8_5G_MAXP 0x00FF
#define SSB_SPROM8_5G_ITSSI 0xFF00
#define SSB_SPROM8_5G_ITSSI_SHIFT 8
#define SSB_SPROM8_5GHL_MAXP 0x0A
/* 5.2GHz and 5.8GHz Max Power */
#define SSB_SPROM8_5GH_MAXP 0x00FF
#define SSB_SPROM8_5GL_MAXP 0xFF00
#define SSB_SPROM8_5GL_MAXP_SHIFT 8
#define SSB_SROM8_5G_PA_0 0x0C
/* 5.3GHz power amp settings */
#define SSB_SROM8_5G_PA_1 0x0E
#define SSB_SROM8_5G_PA_2 0x10
#define SSB_SROM8_5GL_PA_0 0x12
/* 5.2GHz power amp settings */
#define SSB_SROM8_5GL_PA_1 0x14
#define SSB_SROM8_5GL_PA_2 0x16
#define SSB_SROM8_5GH_PA_0 0x18
/* 5.8GHz power amp settings */
#define SSB_SROM8_5GH_PA_1 0x1A
#define SSB_SROM8_5GH_PA_2 0x1C
/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0
/* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF
/* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00
/* Mask for path 1 itssi_bg */
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
#define SSB_SPROM8_PA0B0 0x00C2
/* 2GHz power amp settings */
#define SSB_SPROM8_PA0B1 0x00C4
#define SSB_SPROM8_PA0B2 0x00C6
#define SSB_SPROM8_MAXP_A 0x00C8
/* Max Power 5.3GHz */
#define SSB_SPROM8_MAXP_A_MASK 0x00FF
/* Mask for Max Power 5.3GHz */
#define SSB_SPROM8_ITSSI_A 0xFF00
/* Mask for path 1 itssi_a */
#define SSB_SPROM8_ITSSI_A_SHIFT 8
#define SSB_SPROM8_MAXP_AHL 0x00CA
/* Max Power 5.2/5.8GHz */
#define SSB_SPROM8_MAXP_AH_MASK 0x00FF
/* Mask for Max Power 5.8GHz */
#define SSB_SPROM8_MAXP_AL_MASK 0xFF00
/* Mask for Max Power 5.2GHz */
#define SSB_SPROM8_MAXP_AL_SHIFT 8
#define SSB_SPROM8_PA1B0 0x00CC
/* 5.3GHz power amp settings */
#define SSB_SPROM8_PA1B1 0x00CE
#define SSB_SPROM8_PA1B2 0x00D0
#define SSB_SPROM8_PA1LOB0 0x00D2
/* 5.2GHz power amp settings */
#define SSB_SPROM8_PA1LOB1 0x00D4
#define SSB_SPROM8_PA1LOB2 0x00D6
#define SSB_SPROM8_PA1HIB0 0x00D8
/* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
#define SSB_SPROM8_CCK2GPO 0x0140
/* CCK power offset */
#define SSB_SPROM8_OFDM2GPO 0x0142
/* 2.4GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GPO 0x0146
/* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A
/* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E
/* 5.8GHz OFDM power offset */
#define SSB_SPROM8_2G_MCSPO 0x0152
#define SSB_SPROM8_5G_MCSPO 0x0162
#define SSB_SPROM8_5GL_MCSPO 0x0172
#define SSB_SPROM8_5GH_MCSPO 0x0182
#define SSB_SPROM8_CDDPO 0x0192
#define SSB_SPROM8_STBCPO 0x0194
#define SSB_SPROM8_BW40PO 0x0196
#define SSB_SPROM8_BWDUPPO 0x0198
/* Values for boardflags_lo read from SPROM */
#define SSB_BFL_BTCOEXIST 0x0001
/* implements Bluetooth coexistance */
#define SSB_BFL_PACTRL 0x0002
/* GPIO 9 controlling the PA */
#define SSB_BFL_AIRLINEMODE 0x0004
/* implements GPIO 13 radio disable indication */
#define SSB_BFL_RSSI 0x0008
/* software calculates nrssi slope. */
#define SSB_BFL_ENETSPI 0x0010
/* has ephy roboswitch spi */
#define SSB_BFL_XTAL_NOSLOW 0x0020
/* no slow clock available */
#define SSB_BFL_CCKHIPWR 0x0040
/* can do high power CCK transmission */
#define SSB_BFL_ENETADM 0x0080
/* has ADMtek switch */
#define SSB_BFL_ENETVLAN 0x0100
/* can do vlan */
#define SSB_BFL_AFTERBURNER 0x0200
/* supports Afterburner mode */
#define SSB_BFL_NOPCI 0x0400
/* board leaves PCI floating */
#define SSB_BFL_FEM 0x0800
/* supports the Front End Module */
#define SSB_BFL_EXTLNA 0x1000
/* has an external LNA */
#define SSB_BFL_HGPA 0x2000
/* had high gain PA */
#define SSB_BFL_BTCMOD 0x4000
/* BFL_BTCOEXIST is given in alternate GPIOs */
#define SSB_BFL_ALTIQ 0x8000
/* alternate I/Q settings */
/* Values for boardflags_hi read from SPROM */
#define SSB_BFH_NOPA 0x0001
/* has no PA */
#define SSB_BFH_RSSIINV 0x0002
/* RSSI uses positive slope (not TSSI) */
#define SSB_BFH_PAREF 0x0004
/* uses the PARef LDO */
#define SSB_BFH_3TSWITCH 0x0008
/* uses a triple throw switch shared with bluetooth */
#define SSB_BFH_PHASESHIFT 0x0010
/* can support phase shifter */
#define SSB_BFH_BUCKBOOST 0x0020
/* has buck/booster */
#define SSB_BFH_FEM_BT 0x0040
/* has FEM and switch to share antenna with bluetooth */
/* Values for boardflags2_lo read from SPROM */
#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001
/* external RX BB regulator present */
#define SSB_BFL2_APLL_WAR 0x0002
/* alternative A-band PLL settings implemented */
#define SSB_BFL2_TXPWRCTRL_EN 0x0004
/* permits enabling TX Power Control */
#define SSB_BFL2_2X4_DIV 0x0008
/* 2x4 diversity switch */
#define SSB_BFL2_5G_PWRGAIN 0x0010
/* supports 5G band power gain */
#define SSB_BFL2_PCIEWAR_OVR 0x0020
/* overrides ASPM and Clkreq settings */
#define SSB_BFL2_CAESERS_BRD 0x0040
/* is Caesers board (unused) */
#define SSB_BFL2_BTC3WIRE 0x0080
/* used 3-wire bluetooth coexist */
#define SSB_BFL2_SKWRKFEM_BRD 0x0100
/* 4321mcm93 uses Skyworks FEM */
#define SSB_BFL2_SPUR_WAR 0x0200
/* has a workaround for clock-harmonic spurs */
#define SSB_BFL2_GPLL_WAR 0x0400
/* altenative G-band PLL settings implemented */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
SSB_SPROM1CCODE_WORLD = 0,
SSB_SPROM1CCODE_THAILAND,
SSB_SPROM1CCODE_ISRAEL,
SSB_SPROM1CCODE_JORDAN,
SSB_SPROM1CCODE_CHINA,
SSB_SPROM1CCODE_JAPAN,
SSB_SPROM1CCODE_USA_CANADA_ANZ,
SSB_SPROM1CCODE_EUROPE,
SSB_SPROM1CCODE_USA_LOW,
SSB_SPROM1CCODE_JAPAN_HIGH,
SSB_SPROM1CCODE_ALL,
SSB_SPROM1CCODE_NONE,
};
/* Address-Match values and masks (SSB_ADMATCHxxx) */
#define SSB_ADM_TYPE 0x00000003
/* Address type */
#define SSB_ADM_TYPE0 0
#define SSB_ADM_TYPE1 1
#define SSB_ADM_TYPE2 2
#define SSB_ADM_AD64 0x00000004
#define SSB_ADM_SZ0 0x000000F8
/* Type0 size */
#define SSB_ADM_SZ0_SHIFT 3
#define SSB_ADM_SZ1 0x000001F8
/* Type1 size */
#define SSB_ADM_SZ1_SHIFT 3
#define SSB_ADM_SZ2 0x000001F8
/* Type2 size */
#define SSB_ADM_SZ2_SHIFT 3
#define SSB_ADM_EN 0x00000400
/* Enable */
#define SSB_ADM_NEG 0x00000800
/* Negative decode */
#define SSB_ADM_BASE0 0xFFFFFF00
/* Type0 base address */
#define SSB_ADM_BASE0_SHIFT 8
#define SSB_ADM_BASE1 0xFFFFF000
/* Type1 base address for the core */
#define SSB_ADM_BASE1_SHIFT 12
#define SSB_ADM_BASE2 0xFFFF0000
/* Type2 base address for the core */
#define SSB_ADM_BASE2_SHIFT 16
#endif /* LINUX_SSB_REGS_H_ */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| michael buesch | michael buesch | 1282 | 45.83% | 3 | 11.54% |
| rafal milecki | rafal milecki | 895 | 32.00% | 13 | 50.00% |
| gabor stefanik | gabor stefanik | 215 | 7.69% | 1 | 3.85% |
| hauke mehrtens | hauke mehrtens | 212 | 7.58% | 4 | 15.38% |
| larry finger | larry finger | 192 | 6.86% | 4 | 15.38% |
| piotr haber | piotr haber | 1 | 0.04% | 1 | 3.85% |
| Total | 2797 | 100.00% | 26 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.