Release 4.7 include/linux/timekeeper_internal.h
/*
* You SHOULD NOT be including this unless you're vsyscall
* handling code or timekeeping internal code!
*/
#ifndef _LINUX_TIMEKEEPER_INTERNAL_H
#define _LINUX_TIMEKEEPER_INTERNAL_H
#include <linux/clocksource.h>
#include <linux/jiffies.h>
#include <linux/time.h>
/**
* struct tk_read_base - base structure for timekeeping readout
* @clock: Current clocksource used for timekeeping.
* @read: Read function of @clock
* @mask: Bitmask for two's complement subtraction of non 64bit clocks
* @cycle_last: @clock cycle value at last update
* @mult: (NTP adjusted) multiplier for scaled math conversion
* @shift: Shift value for scaled math conversion
* @xtime_nsec: Shifted (fractional) nano seconds offset for readout
* @base: ktime_t (nanoseconds) base time for readout
*
* This struct has size 56 byte on 64 bit. Together with a seqcount it
* occupies a single 64byte cache line.
*
* The struct is separate from struct timekeeper as it is also used
* for a fast NMI safe accessors.
*/
struct tk_read_base {
struct clocksource *clock;
cycle_t (*read)(struct clocksource *cs);
cycle_t mask;
cycle_t cycle_last;
u32 mult;
u32 shift;
u64 xtime_nsec;
ktime_t base;
};
/**
* struct timekeeper - Structure holding internal timekeeping values.
* @tkr_mono: The readout base structure for CLOCK_MONOTONIC
* @tkr_raw: The readout base structure for CLOCK_MONOTONIC_RAW
* @xtime_sec: Current CLOCK_REALTIME time in seconds
* @ktime_sec: Current CLOCK_MONOTONIC time in seconds
* @wall_to_monotonic: CLOCK_REALTIME to CLOCK_MONOTONIC offset
* @offs_real: Offset clock monotonic -> clock realtime
* @offs_boot: Offset clock monotonic -> clock boottime
* @offs_tai: Offset clock monotonic -> clock tai
* @tai_offset: The current UTC to TAI offset in seconds
* @clock_was_set_seq: The sequence number of clock was set events
* @cs_was_changed_seq: The sequence number of clocksource change events
* @next_leap_ktime: CLOCK_MONOTONIC time value of a pending leap-second
* @raw_time: Monotonic raw base time in timespec64 format
* @cycle_interval: Number of clock cycles in one NTP interval
* @xtime_interval: Number of clock shifted nano seconds in one NTP
* interval.
* @xtime_remainder: Shifted nano seconds left over when rounding
* @cycle_interval
* @raw_interval: Raw nano seconds accumulated per NTP interval.
* @ntp_error: Difference between accumulated time and NTP time in ntp
* shifted nano seconds.
* @ntp_error_shift: Shift conversion between clock shifted nano seconds and
* ntp shifted nano seconds.
* @last_warning: Warning ratelimiter (DEBUG_TIMEKEEPING)
* @underflow_seen: Underflow warning flag (DEBUG_TIMEKEEPING)
* @overflow_seen: Overflow warning flag (DEBUG_TIMEKEEPING)
*
* Note: For timespec(64) based interfaces wall_to_monotonic is what
* we need to add to xtime (or xtime corrected for sub jiffie times)
* to get to monotonic time. Monotonic is pegged at zero at system
* boot time, so wall_to_monotonic will be negative, however, we will
* ALWAYS keep the tv_nsec part positive so we can use the usual
* normalization.
*
* wall_to_monotonic is moved after resume from suspend for the
* monotonic time not to jump. We need to add total_sleep_time to
* wall_to_monotonic to get the real boot based time offset.
*
* wall_to_monotonic is no longer the boot time, getboottime must be
* used instead.
*/
struct timekeeper {
struct tk_read_base tkr_mono;
struct tk_read_base tkr_raw;
u64 xtime_sec;
unsigned long ktime_sec;
struct timespec64 wall_to_monotonic;
ktime_t offs_real;
ktime_t offs_boot;
ktime_t offs_tai;
s32 tai_offset;
unsigned int clock_was_set_seq;
u8 cs_was_changed_seq;
ktime_t next_leap_ktime;
struct timespec64 raw_time;
/* The following members are for timekeeping internal use */
cycle_t cycle_interval;
u64 xtime_interval;
s64 xtime_remainder;
u32 raw_interval;
/* The ntp_tick_length() value currently being used.
* This cached copy ensures we consistently apply the tick
* length for an entire tick, as ntp_tick_length may change
* mid-tick, and we don't want to apply that new value to
* the tick in progress.
*/
u64 ntp_tick;
/* Difference between accumulated time and NTP time in ntp
* shifted nano seconds. */
s64 ntp_error;
u32 ntp_error_shift;
u32 ntp_err_mult;
#ifdef CONFIG_DEBUG_TIMEKEEPING
long last_warning;
/*
* These simple flag variables are managed
* without locks, which is racy, but they are
* ok since we don't really care about being
* super precise about how many events were
* seen, just that a problem was observed.
*/
int underflow_seen;
int overflow_seen;
#endif
};
#ifdef CONFIG_GENERIC_TIME_VSYSCALL
extern void update_vsyscall(struct timekeeper *tk);
extern void update_vsyscall_tz(void);
#elif defined(CONFIG_GENERIC_TIME_VSYSCALL_OLD)
extern void update_vsyscall_old(struct timespec *ts, struct timespec *wtm,
struct clocksource *c, u32 mult,
cycle_t cycle_last);
extern void update_vsyscall_tz(void);
#else
static inline void update_vsyscall(struct timekeeper *tk)
{
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| john stultz | john stultz | 11 | 100.00% | 2 | 100.00% |
| Total | 11 | 100.00% | 2 | 100.00% |
static inline void update_vsyscall_tz(void)
{
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| john stultz | john stultz | 8 | 100.00% | 1 | 100.00% |
| Total | 8 | 100.00% | 1 | 100.00% |
#endif
#endif /* _LINUX_TIMEKEEPER_INTERNAL_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| john stultz | john stultz | 158 | 67.23% | 9 | 47.37% |
| thomas gleixner | thomas gleixner | 62 | 26.38% | 6 | 31.58% |
| peter zijlstra | peter zijlstra | 7 | 2.98% | 2 | 10.53% |
| christopher s. hall | christopher s. hall | 4 | 1.70% | 1 | 5.26% |
| heena sirwani | heena sirwani | 4 | 1.70% | 1 | 5.26% |
| Total | 235 | 100.00% | 19 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.