Release 4.7 include/linux/usb/msm_hsusb.h
/* linux/include/asm-arm/arch-msm/hsusb.h
*
* Copyright (C) 2008 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MSM_HSUSB_H
#define __ASM_ARCH_MSM_HSUSB_H
#include <linux/extcon.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include <linux/clk.h>
/**
* OTG control
*
* OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host
* only configuration.
* OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY.
* OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware.
* OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs.
*
*/
enum otg_control_type {
OTG_NO_CONTROL = 0,
OTG_PHY_CONTROL,
OTG_PMIC_CONTROL,
OTG_USER_CONTROL,
};
/**
* PHY used in
*
* INVALID_PHY Unsupported PHY
* CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY
* SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY
*
*/
enum msm_usb_phy_type {
INVALID_PHY = 0,
CI_45NM_INTEGRATED_PHY,
SNPS_28NM_INTEGRATED_PHY,
};
#define IDEV_CHG_MAX 1500
#define IUNIT 100
/**
* Different states involved in USB charger detection.
*
* USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
* process is not yet started.
* USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
* USB_CHG_STATE_DCD_DONE Data pin contact is detected.
* USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
* between SDP and DCP/CDP).
* USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
* between DCP and CDP).
* USB_CHG_STATE_DETECTED USB charger type is determined.
*
*/
enum usb_chg_state {
USB_CHG_STATE_UNDEFINED = 0,
USB_CHG_STATE_WAIT_FOR_DCD,
USB_CHG_STATE_DCD_DONE,
USB_CHG_STATE_PRIMARY_DONE,
USB_CHG_STATE_SECONDARY_DONE,
USB_CHG_STATE_DETECTED,
};
/**
* USB charger types
*
* USB_INVALID_CHARGER Invalid USB charger.
* USB_SDP_CHARGER Standard downstream port. Refers to a downstream port
* on USB2.0 compliant host/hub.
* USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger).
* USB_CDP_CHARGER Charging downstream port. Enumeration can happen and
* IDEV_CHG_MAX can be drawn irrespective of USB state.
*
*/
enum usb_chg_type {
USB_INVALID_CHARGER = 0,
USB_SDP_CHARGER,
USB_DCP_CHARGER,
USB_CDP_CHARGER,
};
/**
* struct msm_otg_platform_data - platform device data
* for msm_otg driver.
* @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
* "do not overwrite default vaule at this address".
* @phy_init_sz: PHY configuration sequence size.
* @vbus_power: VBUS power on/off routine.
* @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
* @mode: Supported mode (OTG/peripheral/host).
* @otg_control: OTG switch controlled by user/Id pin
*/
struct msm_otg_platform_data {
int *phy_init_seq;
int phy_init_sz;
void (*vbus_power)(bool on);
unsigned power_budget;
enum usb_dr_mode mode;
enum otg_control_type otg_control;
enum msm_usb_phy_type phy_type;
void (*setup_gpio)(enum usb_otg_state state);
};
/**
* struct msm_usb_cable - structure for exteternal connector cable
* state tracking
* @nb: hold event notification callback
* @conn: used for notification registration
*/
struct msm_usb_cable {
struct notifier_block nb;
struct extcon_dev *extcon;
};
/**
* struct msm_otg: OTG driver data. Shared by HCD and DCD.
* @otg: USB OTG Transceiver structure.
* @pdata: otg device platform data.
* @irq: IRQ number assigned for HSUSB controller.
* @clk: clock struct of usb_hs_clk.
* @pclk: clock struct of usb_hs_pclk.
* @core_clk: clock struct of usb_hs_core_clk.
* @regs: ioremapped register base address.
* @inputs: OTG state machine inputs(Id, SessValid etc).
* @sm_work: OTG state machine work.
* @in_lpm: indicates low power mode (LPM) state.
* @async_int: Async interrupt arrived.
* @cur_power: The amount of mA available from downstream port.
* @chg_work: Charger detection work.
* @chg_state: The state of charger detection process.
* @chg_type: The type of charger attached.
* @dcd_retires: The retry count used to track Data contact
* detection process.
* @manual_pullup: true if VBUS is not routed to USB controller/phy
* and controller driver therefore enables pull-up explicitly before
* starting controller using usbcmd run/stop bit.
* @vbus: VBUS signal state trakining, using extcon framework
* @id: ID signal state trakining, using extcon framework
* @switch_gpio: Descriptor for GPIO used to control external Dual
* SPDT USB Switch.
* @reboot: Used to inform the driver to route USB D+/D- line to Device
* connector
*/
struct msm_otg {
struct usb_phy phy;
struct msm_otg_platform_data *pdata;
int irq;
struct clk *clk;
struct clk *pclk;
struct clk *core_clk;
void __iomem *regs;
#define ID 0
#define B_SESS_VLD 1
unsigned long inputs;
struct work_struct sm_work;
atomic_t in_lpm;
int async_int;
unsigned cur_power;
int phy_number;
struct delayed_work chg_work;
enum usb_chg_state chg_state;
enum usb_chg_type chg_type;
u8 dcd_retries;
struct regulator *v3p3;
struct regulator *v1p8;
struct regulator *vddcx;
struct reset_control *phy_rst;
struct reset_control *link_rst;
int vdd_levels[3];
bool manual_pullup;
struct msm_usb_cable vbus;
struct msm_usb_cable id;
struct gpio_desc *switch_gpio;
struct notifier_block reboot;
};
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pavankumar kondeti | pavankumar kondeti | 204 | 71.08% | 3 | 18.75% |
| ivan t. ivanov | ivan t. ivanov | 78 | 27.18% | 10 | 62.50% |
| chanwoo choi | chanwoo choi | 3 | 1.05% | 1 | 6.25% |
| heikki krogerus | heikki krogerus | 2 | 0.70% | 2 | 12.50% |
| Total | 287 | 100.00% | 16 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.