/* * linux/sound/wm8903.h -- Platform data for WM8903 * * Copyright 2010 Wolfson Microelectronics. PLC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __LINUX_SND_WM8903_H #define __LINUX_SND_WM8903_H /* * Used to enable configuration of a GPIO to all zeros; a gpio_cfg value of * zero in platform data means "don't touch this pin". */ #define WM8903_GPIO_CONFIG_ZERO 0x8000 /* * R6 (0x06) - Mic Bias Control 0 */ #define WM8903_MICDET_THR_MASK 0x0030 /* MICDET_THR - [5:4] */ #define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [5:4] */ #define WM8903_MICDET_THR_WIDTH 2 /* MICDET_THR - [5:4] */ #define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */ #define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */ #define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */ #define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */ #define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */ #define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */ #define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */ #define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */ #define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */ #define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */ #define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */ /* * WM8903_GPn_FN values * * See datasheets for list of valid values per pin */ #define WM8903_GPn_FN_GPIO_OUTPUT 0 #define WM8903_GPn_FN_BCLK 1 #define WM8903_GPn_FN_IRQ_OUTPT 2 #define WM8903_GPn_FN_GPIO_INPUT 3 #define WM8903_GPn_FN_MICBIAS_CURRENT_DETECT 4 #define WM8903_GPn_FN_MICBIAS_SHORT_DETECT 5 #define WM8903_GPn_FN_DMIC_LR_CLK_OUTPUT 6 #define WM8903_GPn_FN_FLL_LOCK_OUTPUT 8 #define WM8903_GPn_FN_FLL_CLOCK_OUTPUT 9 /* * R116 (0x74) - GPIO Control 1 */ #define WM8903_GP1_FN_MASK 0x1F00 /* GP1_FN - [12:8] */ #define WM8903_GP1_FN_SHIFT 8 /* GP1_FN - [12:8] */ #define WM8903_GP1_FN_WIDTH 5 /* GP1_FN - [12:8] */ #define WM8903_GP1_DIR 0x0080 /* GP1_DIR */ #define WM8903_GP1_DIR_MASK 0x0080 /* GP1_DIR */ #define WM8903_GP1_DIR_SHIFT 7 /* GP1_DIR */ #define WM8903_GP1_DIR_WIDTH 1 /* GP1_DIR */ #define WM8903_GP1_OP_CFG 0x0040 /* GP1_OP_CFG */ #define WM8903_GP1_OP_CFG_MASK 0x0040 /* GP1_OP_CFG */ #define WM8903_GP1_OP_CFG_SHIFT 6 /* GP1_OP_CFG */ #define WM8903_GP1_OP_CFG_WIDTH 1 /* GP1_OP_CFG */ #define WM8903_GP1_IP_CFG 0x0020 /* GP1_IP_CFG */ #define WM8903_GP1_IP_CFG_MASK 0x0020 /* GP1_IP_CFG */ #define WM8903_GP1_IP_CFG_SHIFT 5 /* GP1_IP_CFG */ #define WM8903_GP1_IP_CFG_WIDTH 1 /* GP1_IP_CFG */ #define WM8903_GP1_LVL 0x0010 /* GP1_LVL */ #define WM8903_GP1_LVL_MASK 0x0010 /* GP1_LVL */ #define WM8903_GP1_LVL_SHIFT 4 /* GP1_LVL */ #define WM8903_GP1_LVL_WIDTH 1 /* GP1_LVL */ #define WM8903_GP1_PD 0x0008 /* GP1_PD */ #define WM8903_GP1_PD_MASK 0x0008 /* GP1_PD */ #define WM8903_GP1_PD_SHIFT 3 /* GP1_PD */ #define WM8903_GP1_PD_WIDTH 1 /* GP1_PD */ #define WM8903_GP1_PU 0x0004 /* GP1_PU */ #define WM8903_GP1_PU_MASK 0x0004 /* GP1_PU */ #define WM8903_GP1_PU_SHIFT 2 /* GP1_PU */ #define WM8903_GP1_PU_WIDTH 1 /* GP1_PU */ #define WM8903_GP1_INTMODE 0x0002 /* GP1_INTMODE */ #define WM8903_GP1_INTMODE_MASK 0x0002 /* GP1_INTMODE */ #define WM8903_GP1_INTMODE_SHIFT 1 /* GP1_INTMODE */ #define WM8903_GP1_INTMODE_WIDTH 1 /* GP1_INTMODE */ #define WM8903_GP1_DB 0x0001 /* GP1_DB */ #define WM8903_GP1_DB_MASK 0x0001 /* GP1_DB */ #define WM8903_GP1_DB_SHIFT 0 /* GP1_DB */ #define WM8903_GP1_DB_WIDTH 1 /* GP1_DB */ /* * R117 (0x75) - GPIO Control 2 */ #define WM8903_GP2_FN_MASK 0x1F00 /* GP2_FN - [12:8] */ #define WM8903_GP2_FN_SHIFT 8 /* GP2_FN - [12:8] */ #define WM8903_GP2_FN_WIDTH 5 /* GP2_FN - [12:8] */ #define WM8903_GP2_DIR 0x0080 /* GP2_DIR */ #define WM8903_GP2_DIR_MASK 0x0080 /* GP2_DIR */ #define WM8903_GP2_DIR_SHIFT 7 /* GP2_DIR */ #define WM8903_GP2_DIR_WIDTH 1 /* GP2_DIR */ #define WM8903_GP2_OP_CFG 0x0040 /* GP2_OP_CFG */ #define WM8903_GP2_OP_CFG_MASK 0x0040 /* GP2_OP_CFG */ #define WM8903_GP2_OP_CFG_SHIFT 6 /* GP2_OP_CFG */ #define WM8903_GP2_OP_CFG_WIDTH 1 /* GP2_OP_CFG */ #define WM8903_GP2_IP_CFG 0x0020 /* GP2_IP_CFG */ #define WM8903_GP2_IP_CFG_MASK 0x0020 /* GP2_IP_CFG */ #define WM8903_GP2_IP_CFG_SHIFT 5 /* GP2_IP_CFG */ #define WM8903_GP2_IP_CFG_WIDTH 1 /* GP2_IP_CFG */ #define WM8903_GP2_LVL 0x0010 /* GP2_LVL */ #define WM8903_GP2_LVL_MASK 0x0010 /* GP2_LVL */ #define WM8903_GP2_LVL_SHIFT 4 /* GP2_LVL */ #define WM8903_GP2_LVL_WIDTH 1 /* GP2_LVL */ #define WM8903_GP2_PD 0x0008 /* GP2_PD */ #define WM8903_GP2_PD_MASK 0x0008 /* GP2_PD */ #define WM8903_GP2_PD_SHIFT 3 /* GP2_PD */ #define WM8903_GP2_PD_WIDTH 1 /* GP2_PD */ #define WM8903_GP2_PU 0x0004 /* GP2_PU */ #define WM8903_GP2_PU_MASK 0x0004 /* GP2_PU */ #define WM8903_GP2_PU_SHIFT 2 /* GP2_PU */ #define WM8903_GP2_PU_WIDTH 1 /* GP2_PU */ #define WM8903_GP2_INTMODE 0x0002 /* GP2_INTMODE */ #define WM8903_GP2_INTMODE_MASK 0x0002 /* GP2_INTMODE */ #define WM8903_GP2_INTMODE_SHIFT 1 /* GP2_INTMODE */ #define WM8903_GP2_INTMODE_WIDTH 1 /* GP2_INTMODE */ #define WM8903_GP2_DB 0x0001 /* GP2_DB */ #define WM8903_GP2_DB_MASK 0x0001 /* GP2_DB */ #define WM8903_GP2_DB_SHIFT 0 /* GP2_DB */ #define WM8903_GP2_DB_WIDTH 1 /* GP2_DB */ /* * R118 (0x76) - GPIO Control 3 */ #define WM8903_GP3_FN_MASK 0x1F00 /* GP3_FN - [12:8] */ #define WM8903_GP3_FN_SHIFT 8 /* GP3_FN - [12:8] */ #define WM8903_GP3_FN_WIDTH 5 /* GP3_FN - [12:8] */ #define WM8903_GP3_DIR 0x0080 /* GP3_DIR */ #define WM8903_GP3_DIR_MASK 0x0080 /* GP3_DIR */ #define WM8903_GP3_DIR_SHIFT 7 /* GP3_DIR */ #define WM8903_GP3_DIR_WIDTH 1 /* GP3_DIR */ #define WM8903_GP3_OP_CFG 0x0040 /* GP3_OP_CFG */ #define WM8903_GP3_OP_CFG_MASK 0x0040 /* GP3_OP_CFG */ #define WM8903_GP3_OP_CFG_SHIFT 6 /* GP3_OP_CFG */ #define WM8903_GP3_OP_CFG_WIDTH 1 /* GP3_OP_CFG */ #define WM8903_GP3_IP_CFG 0x0020 /* GP3_IP_CFG */ #define WM8903_GP3_IP_CFG_MASK 0x0020 /* GP3_IP_CFG */ #define WM8903_GP3_IP_CFG_SHIFT 5 /* GP3_IP_CFG */ #define WM8903_GP3_IP_CFG_WIDTH 1 /* GP3_IP_CFG */ #define WM8903_GP3_LVL 0x0010 /* GP3_LVL */ #define WM8903_GP3_LVL_MASK 0x0010 /* GP3_LVL */ #define WM8903_GP3_LVL_SHIFT 4 /* GP3_LVL */ #define WM8903_GP3_LVL_WIDTH 1 /* GP3_LVL */ #define WM8903_GP3_PD 0x0008 /* GP3_PD */ #define WM8903_GP3_PD_MASK 0x0008 /* GP3_PD */ #define WM8903_GP3_PD_SHIFT 3 /* GP3_PD */ #define WM8903_GP3_PD_WIDTH 1 /* GP3_PD */ #define WM8903_GP3_PU 0x0004 /* GP3_PU */ #define WM8903_GP3_PU_MASK 0x0004 /* GP3_PU */ #define WM8903_GP3_PU_SHIFT 2 /* GP3_PU */ #define WM8903_GP3_PU_WIDTH 1 /* GP3_PU */ #define WM8903_GP3_INTMODE 0x0002 /* GP3_INTMODE */ #define WM8903_GP3_INTMODE_MASK 0x0002 /* GP3_INTMODE */ #define WM8903_GP3_INTMODE_SHIFT 1 /* GP3_INTMODE */ #define WM8903_GP3_INTMODE_WIDTH 1 /* GP3_INTMODE */ #define WM8903_GP3_DB 0x0001 /* GP3_DB */ #define WM8903_GP3_DB_MASK 0x0001 /* GP3_DB */ #define WM8903_GP3_DB_SHIFT 0 /* GP3_DB */ #define WM8903_GP3_DB_WIDTH 1 /* GP3_DB */ /* * R119 (0x77) - GPIO Control 4 */ #define WM8903_GP4_FN_MASK 0x1F00 /* GP4_FN - [12:8] */ #define WM8903_GP4_FN_SHIFT 8 /* GP4_FN - [12:8] */ #define WM8903_GP4_FN_WIDTH 5 /* GP4_FN - [12:8] */ #define WM8903_GP4_DIR 0x0080 /* GP4_DIR */ #define WM8903_GP4_DIR_MASK 0x0080 /* GP4_DIR */ #define WM8903_GP4_DIR_SHIFT 7 /* GP4_DIR */ #define WM8903_GP4_DIR_WIDTH 1 /* GP4_DIR */ #define WM8903_GP4_OP_CFG 0x0040 /* GP4_OP_CFG */ #define WM8903_GP4_OP_CFG_MASK 0x0040 /* GP4_OP_CFG */ #define WM8903_GP4_OP_CFG_SHIFT 6 /* GP4_OP_CFG */ #define WM8903_GP4_OP_CFG_WIDTH 1 /* GP4_OP_CFG */ #define WM8903_GP4_IP_CFG 0x0020 /* GP4_IP_CFG */ #define WM8903_GP4_IP_CFG_MASK 0x0020 /* GP4_IP_CFG */ #define WM8903_GP4_IP_CFG_SHIFT 5 /* GP4_IP_CFG */ #define WM8903_GP4_IP_CFG_WIDTH 1 /* GP4_IP_CFG */ #define WM8903_GP4_LVL 0x0010 /* GP4_LVL */ #define WM8903_GP4_LVL_MASK 0x0010 /* GP4_LVL */ #define WM8903_GP4_LVL_SHIFT 4 /* GP4_LVL */ #define WM8903_GP4_LVL_WIDTH 1 /* GP4_LVL */ #define WM8903_GP4_PD 0x0008 /* GP4_PD */ #define WM8903_GP4_PD_MASK 0x0008 /* GP4_PD */ #define WM8903_GP4_PD_SHIFT 3 /* GP4_PD */ #define WM8903_GP4_PD_WIDTH 1 /* GP4_PD */ #define WM8903_GP4_PU 0x0004 /* GP4_PU */ #define WM8903_GP4_PU_MASK 0x0004 /* GP4_PU */ #define WM8903_GP4_PU_SHIFT 2 /* GP4_PU */ #define WM8903_GP4_PU_WIDTH 1 /* GP4_PU */ #define WM8903_GP4_INTMODE 0x0002 /* GP4_INTMODE */ #define WM8903_GP4_INTMODE_MASK 0x0002 /* GP4_INTMODE */ #define WM8903_GP4_INTMODE_SHIFT 1 /* GP4_INTMODE */ #define WM8903_GP4_INTMODE_WIDTH 1 /* GP4_INTMODE */ #define WM8903_GP4_DB 0x0001 /* GP4_DB */ #define WM8903_GP4_DB_MASK 0x0001 /* GP4_DB */ #define WM8903_GP4_DB_SHIFT 0 /* GP4_DB */ #define WM8903_GP4_DB_WIDTH 1 /* GP4_DB */ /* * R120 (0x78) - GPIO Control 5 */ #define WM8903_GP5_FN_MASK 0x1F00 /* GP5_FN - [12:8] */ #define WM8903_GP5_FN_SHIFT 8 /* GP5_FN - [12:8] */ #define WM8903_GP5_FN_WIDTH 5 /* GP5_FN - [12:8] */ #define WM8903_GP5_DIR 0x0080 /* GP5_DIR */ #define WM8903_GP5_DIR_MASK 0x0080 /* GP5_DIR */ #define WM8903_GP5_DIR_SHIFT 7 /* GP5_DIR */ #define WM8903_GP5_DIR_WIDTH 1 /* GP5_DIR */ #define WM8903_GP5_OP_CFG 0x0040 /* GP5_OP_CFG */ #define WM8903_GP5_OP_CFG_MASK 0x0040 /* GP5_OP_CFG */ #define WM8903_GP5_OP_CFG_SHIFT 6 /* GP5_OP_CFG */ #define WM8903_GP5_OP_CFG_WIDTH 1 /* GP5_OP_CFG */ #define WM8903_GP5_IP_CFG 0x0020 /* GP5_IP_CFG */ #define WM8903_GP5_IP_CFG_MASK 0x0020 /* GP5_IP_CFG */ #define WM8903_GP5_IP_CFG_SHIFT 5 /* GP5_IP_CFG */ #define WM8903_GP5_IP_CFG_WIDTH 1 /* GP5_IP_CFG */ #define WM8903_GP5_LVL 0x0010 /* GP5_LVL */ #define WM8903_GP5_LVL_MASK 0x0010 /* GP5_LVL */ #define WM8903_GP5_LVL_SHIFT 4 /* GP5_LVL */ #define WM8903_GP5_LVL_WIDTH 1 /* GP5_LVL */ #define WM8903_GP5_PD 0x0008 /* GP5_PD */ #define WM8903_GP5_PD_MASK 0x0008 /* GP5_PD */ #define WM8903_GP5_PD_SHIFT 3 /* GP5_PD */ #define WM8903_GP5_PD_WIDTH 1 /* GP5_PD */ #define WM8903_GP5_PU 0x0004 /* GP5_PU */ #define WM8903_GP5_PU_MASK 0x0004 /* GP5_PU */ #define WM8903_GP5_PU_SHIFT 2 /* GP5_PU */ #define WM8903_GP5_PU_WIDTH 1 /* GP5_PU */ #define WM8903_GP5_INTMODE 0x0002 /* GP5_INTMODE */ #define WM8903_GP5_INTMODE_MASK 0x0002 /* GP5_INTMODE */ #define WM8903_GP5_INTMODE_SHIFT 1 /* GP5_INTMODE */ #define WM8903_GP5_INTMODE_WIDTH 1 /* GP5_INTMODE */ #define WM8903_GP5_DB 0x0001 /* GP5_DB */ #define WM8903_GP5_DB_MASK 0x0001 /* GP5_DB */ #define WM8903_GP5_DB_SHIFT 0 /* GP5_DB */ #define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */ #define WM8903_NUM_GPIO 5 struct wm8903_platform_data { bool irq_active_low; /* Set if IRQ active low, default high */ /* Default register value for R6 (Mic bias), used to configure * microphone detection. In conjunction with gpio_cfg this * can be used to route the microphone status signals out onto * the GPIOs for use with snd_soc_jack_add_gpios(). */ u16 micdet_cfg; int micdet_delay; /* Delay after microphone detection (ms) */ int gpio_base; u32 gpio_cfg[WM8903_NUM_GPIO]; /* Default register values for GPIO pin mux */ }; #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp | |
| mark brown | mark brown | 981 | 94.97% | 4 | 57.14% |
| stephen warren | stephen warren | 52 | 5.03% | 3 | 42.86% |
| Total | 1033 | 100.00% | 7 | 100.00% |