cregit-Linux how code gets into the kernel

Release 4.7 include/uapi/linux/sockios.h

/*
 * INET         An implementation of the TCP/IP protocol suite for the LINUX
 *              operating system.  INET is implemented using the  BSD Socket
 *              interface as the means of communication with the user level.
 *
 *              Definitions of the socket-level I/O control calls.
 *
 * Version:     @(#)sockios.h   1.0.2   03/09/93
 *
 * Authors:     Ross Biro
 *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
 *
 *              This program is free software; you can redistribute it and/or
 *              modify it under the terms of the GNU General Public License
 *              as published by the Free Software Foundation; either version
 *              2 of the License, or (at your option) any later version.
 */
#ifndef _LINUX_SOCKIOS_H

#define _LINUX_SOCKIOS_H

#include <asm/sockios.h>

/* Linux-specific socket ioctls */

#define SIOCINQ		FIONREAD

#define SIOCOUTQ	TIOCOUTQ        
/* output queue size (not sent + not acked) */

/* Routing table calls. */

#define SIOCADDRT	0x890B		
/* add routing table entry      */

#define SIOCDELRT	0x890C		
/* delete routing table entry   */

#define SIOCRTMSG	0x890D		
/* unused                       */

/* Socket configuration controls. */

#define SIOCGIFNAME	0x8910		
/* get iface name               */

#define SIOCSIFLINK	0x8911		
/* set iface channel            */

#define SIOCGIFCONF	0x8912		
/* get iface list               */

#define SIOCGIFFLAGS	0x8913		
/* get flags                    */

#define SIOCSIFFLAGS	0x8914		
/* set flags                    */

#define SIOCGIFADDR	0x8915		
/* get PA address               */

#define SIOCSIFADDR	0x8916		
/* set PA address               */

#define SIOCGIFDSTADDR	0x8917		
/* get remote PA address        */

#define SIOCSIFDSTADDR	0x8918		
/* set remote PA address        */

#define SIOCGIFBRDADDR	0x8919		
/* get broadcast PA address     */

#define SIOCSIFBRDADDR	0x891a		
/* set broadcast PA address     */

#define SIOCGIFNETMASK	0x891b		
/* get network PA mask          */

#define SIOCSIFNETMASK	0x891c		
/* set network PA mask          */

#define SIOCGIFMETRIC	0x891d		
/* get metric                   */

#define SIOCSIFMETRIC	0x891e		
/* set metric                   */

#define SIOCGIFMEM	0x891f		
/* get memory address (BSD)     */

#define SIOCSIFMEM	0x8920		
/* set memory address (BSD)     */

#define SIOCGIFMTU	0x8921		
/* get MTU size                 */

#define SIOCSIFMTU	0x8922		
/* set MTU size                 */

#define SIOCSIFNAME	0x8923		
/* set interface name */

#define	SIOCSIFHWADDR	0x8924		
/* set hardware address         */

#define SIOCGIFENCAP	0x8925		
/* get/set encapsulations       */

#define SIOCSIFENCAP	0x8926		

#define SIOCGIFHWADDR	0x8927		
/* Get hardware address         */

#define SIOCGIFSLAVE	0x8929		
/* Driver slaving support       */

#define SIOCSIFSLAVE	0x8930

#define SIOCADDMULTI	0x8931		
/* Multicast address lists      */

#define SIOCDELMULTI	0x8932

#define SIOCGIFINDEX	0x8933		
/* name -> if_index mapping     */

#define SIOGIFINDEX	SIOCGIFINDEX	
/* misprint compatibility :-)   */

#define SIOCSIFPFLAGS	0x8934		
/* set/get extended flags set   */

#define SIOCGIFPFLAGS	0x8935

#define SIOCDIFADDR	0x8936		
/* delete PA address            */

#define	SIOCSIFHWBROADCAST	0x8937	
/* set hardware broadcast addr  */

#define SIOCGIFCOUNT	0x8938		
/* get number of devices */


#define SIOCGIFBR	0x8940		
/* Bridging support             */

#define SIOCSIFBR	0x8941		
/* Set bridging options         */


#define SIOCGIFTXQLEN	0x8942		
/* Get the tx queue length      */

#define SIOCSIFTXQLEN	0x8943		
/* Set the tx queue length      */

/* SIOCGIFDIVERT was:   0x8944          Frame diversion support */
/* SIOCSIFDIVERT was:   0x8945          Set frame diversion options */


#define SIOCETHTOOL	0x8946		
/* Ethtool interface            */


#define SIOCGMIIPHY	0x8947		
/* Get address of MII PHY in use. */

#define SIOCGMIIREG	0x8948		
/* Read MII PHY register.       */

#define SIOCSMIIREG	0x8949		
/* Write MII PHY register.      */


#define SIOCWANDEV	0x894A		
/* get/set netdev parameters    */


#define SIOCOUTQNSD	0x894B		
/* output queue size (not sent only) */

/* ARP cache control calls. */
		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */

#define SIOCDARP	0x8953		
/* delete ARP table entry       */

#define SIOCGARP	0x8954		
/* get ARP table entry          */

#define SIOCSARP	0x8955		
/* set ARP table entry          */

/* RARP cache control calls. */

#define SIOCDRARP	0x8960		
/* delete RARP table entry      */

#define SIOCGRARP	0x8961		
/* get RARP table entry         */

#define SIOCSRARP	0x8962		
/* set RARP table entry         */

/* Driver configuration calls */


#define SIOCGIFMAP	0x8970		
/* Get device parameters        */

#define SIOCSIFMAP	0x8971		
/* Set device parameters        */

/* DLCI configuration calls */


#define SIOCADDDLCI	0x8980		
/* Create new DLCI device       */

#define SIOCDELDLCI	0x8981		
/* Delete DLCI device           */


#define SIOCGIFVLAN	0x8982		
/* 802.1Q VLAN support          */

#define SIOCSIFVLAN	0x8983		
/* Set 802.1Q VLAN options      */

/* bonding calls */


#define SIOCBONDENSLAVE	0x8990		
/* enslave a device to the bond */

#define SIOCBONDRELEASE 0x8991		
/* release a slave from the bond*/

#define SIOCBONDSETHWADDR      0x8992	
/* set the hw addr of the bond  */

#define SIOCBONDSLAVEINFOQUERY 0x8993   
/* rtn info about slave state   */

#define SIOCBONDINFOQUERY      0x8994	
/* rtn info about bond state    */

#define SIOCBONDCHANGEACTIVE   0x8995   
/* update to a new active slave */
			
/* bridge calls */

#define SIOCBRADDBR     0x89a0		
/* create new bridge device     */

#define SIOCBRDELBR     0x89a1		
/* remove bridge device         */

#define SIOCBRADDIF	0x89a2		
/* add interface to bridge      */

#define SIOCBRDELIF	0x89a3		
/* remove interface from bridge */

/* hardware time stamping: parameters in linux/net_tstamp.h */

#define SIOCSHWTSTAMP	0x89b0		
/* set and get config           */

#define SIOCGHWTSTAMP	0x89b1		
/* get config                   */

/* Device private ioctl calls */

/*
 *      These 16 ioctls are available to devices via the do_ioctl() device
 *      vector. Each device should include this file and redefine these names
 *      as their own. Because these are device dependent it is a good idea
 *      _NOT_ to issue them to random objects and hope.
 *
 *      THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
 */
 

#define SIOCDEVPRIVATE	0x89F0	
/* to 89FF */

/*
 *      These 16 ioctl calls are protocol private
 */
 

#define SIOCPROTOPRIVATE 0x89E0 
/* to 89EF */
#endif	/* _LINUX_SOCKIOS_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
pre-gitpre-git30074.26%2161.76%
linus torvaldslinus torvalds5714.11%411.76%
stephen hemmingerstephen hemminger215.20%12.94%
mario schuknechtmario schuknecht61.49%12.94%
ben hutchingsben hutchings61.49%12.94%
francois romieufrancois romieu51.24%25.88%
patrick ohlypatrick ohly51.24%12.94%
adrian bunkadrian bunk20.50%12.94%
heinrich schuchardtheinrich schuchardt10.25%12.94%
jesper juhljesper juhl10.25%12.94%
Total404100.00%34100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}