Release 4.8 drivers/iio/adc/max1027.c

Directory: drivers/iio/adc
/*
  * iio/adc/max1027.c
  * Copyright (C) 2014 Philippe Reynes
  *
  * based on linux/drivers/iio/ad7923.c
  * Copyright 2011 Analog Devices Inc (from AD7923 Driver)
  * Copyright 2012 CS Systemes d'Information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * max1027.c
  *
  * Partial support for max1027 and similar chips.
  */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>


#define MAX1027_CONV_REG  BIT(7)

#define MAX1027_SETUP_REG BIT(6)

#define MAX1027_AVG_REG   BIT(5)

#define MAX1027_RST_REG   BIT(4)

/* conversion register */

#define MAX1027_TEMP      BIT(0)

#define MAX1027_SCAN_0_N  (0x00 << 1)

#define MAX1027_SCAN_N_M  (0x01 << 1)

#define MAX1027_SCAN_N    (0x02 << 1)

#define MAX1027_NOSCAN    (0x03 << 1)

#define MAX1027_CHAN(n)   ((n) << 3)

/* setup register */

#define MAX1027_UNIPOLAR  0x02

#define MAX1027_BIPOLAR   0x03

#define MAX1027_REF_MODE0 (0x00 << 2)

#define MAX1027_REF_MODE1 (0x01 << 2)

#define MAX1027_REF_MODE2 (0x02 << 2)

#define MAX1027_REF_MODE3 (0x03 << 2)

#define MAX1027_CKS_MODE0 (0x00 << 4)

#define MAX1027_CKS_MODE1 (0x01 << 4)

#define MAX1027_CKS_MODE2 (0x02 << 4)

#define MAX1027_CKS_MODE3 (0x03 << 4)

/* averaging register */

#define MAX1027_NSCAN_4   0x00

#define MAX1027_NSCAN_8   0x01

#define MAX1027_NSCAN_12  0x02

#define MAX1027_NSCAN_16  0x03

#define MAX1027_NAVG_4    (0x00 << 2)

#define MAX1027_NAVG_8    (0x01 << 2)

#define MAX1027_NAVG_16   (0x02 << 2)

#define MAX1027_NAVG_32   (0x03 << 2)

#define MAX1027_AVG_EN    BIT(4)


enum max1027_id {
	
max1027,
	
max1029,
	
max1031,
};


static const struct spi_device_id max1027_id[] = {
	{"max1027", max1027},
	{"max1029", max1029},
	{"max1031", max1031},
	{}
};
MODULE_DEVICE_TABLE(spi, max1027_id);

#ifdef CONFIG_OF

static const struct of_device_id max1027_adc_dt_ids[] = {
	{ .compatible = "maxim,max1027" },
	{ .compatible = "maxim,max1029" },
	{ .compatible = "maxim,max1031" },
	{},
};
MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
#endif


#define MAX1027_V_CHAN(index)						\
	{                                                               \
                .type = IIO_VOLTAGE,                                    \
                .indexed = 1,                                           \
                .channel = index,                                       \
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
                .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
                .scan_index = index + 1,                                \
                .scan_type = {                                          \
                        .sign = 'u',                                    \
                        .realbits = 10,                                 \
                        .storagebits = 16,                              \
                        .shift = 2,                                     \
                        .endianness = IIO_BE,                           \
                },                                                      \
        }


#define MAX1027_T_CHAN							\
	{                                                               \
                .type = IIO_TEMP,                                       \
                .channel = 0,                                           \
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
                .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
                .scan_index = 0,                                        \
                .scan_type = {                                          \
                        .sign = 'u',                                    \
                        .realbits = 12,                                 \
                        .storagebits = 16,                              \
                        .endianness = IIO_BE,                           \
                },                                                      \
        }


static const struct iio_chan_spec max1027_channels[] = {
	MAX1027_T_CHAN,
	MAX1027_V_CHAN(0),
	MAX1027_V_CHAN(1),
	MAX1027_V_CHAN(2),
	MAX1027_V_CHAN(3),
	MAX1027_V_CHAN(4),
	MAX1027_V_CHAN(5),
	MAX1027_V_CHAN(6),
	MAX1027_V_CHAN(7)
};


static const struct iio_chan_spec max1029_channels[] = {
	MAX1027_T_CHAN,
	MAX1027_V_CHAN(0),
	MAX1027_V_CHAN(1),
	MAX1027_V_CHAN(2),
	MAX1027_V_CHAN(3),
	MAX1027_V_CHAN(4),
	MAX1027_V_CHAN(5),
	MAX1027_V_CHAN(6),
	MAX1027_V_CHAN(7),
	MAX1027_V_CHAN(8),
	MAX1027_V_CHAN(9),
	MAX1027_V_CHAN(10),
	MAX1027_V_CHAN(11)
};


static const struct iio_chan_spec max1031_channels[] = {
	MAX1027_T_CHAN,
	MAX1027_V_CHAN(0),
	MAX1027_V_CHAN(1),
	MAX1027_V_CHAN(2),
	MAX1027_V_CHAN(3),
	MAX1027_V_CHAN(4),
	MAX1027_V_CHAN(5),
	MAX1027_V_CHAN(6),
	MAX1027_V_CHAN(7),
	MAX1027_V_CHAN(8),
	MAX1027_V_CHAN(9),
	MAX1027_V_CHAN(10),
	MAX1027_V_CHAN(11),
	MAX1027_V_CHAN(12),
	MAX1027_V_CHAN(13),
	MAX1027_V_CHAN(14),
	MAX1027_V_CHAN(15)
};


static const unsigned long max1027_available_scan_masks[] = {
	0x000001ff,
	0x00000000,
};


static const unsigned long max1029_available_scan_masks[] = {
	0x00001fff,
	0x00000000,
};


static const unsigned long max1031_available_scan_masks[] = {
	0x0001ffff,
	0x00000000,
};


struct max1027_chip_info {
	
const struct iio_chan_spec *channels;
	
unsigned int num_channels;
	
const unsigned long *available_scan_masks;
};


static const struct max1027_chip_info max1027_chip_info_tbl[] = {
	[max1027] = {
		.channels = max1027_channels,
		.num_channels = ARRAY_SIZE(max1027_channels),
		.available_scan_masks = max1027_available_scan_masks,
        },
	[max1029] = {
		.channels = max1029_channels,
		.num_channels = ARRAY_SIZE(max1029_channels),
		.available_scan_masks = max1029_available_scan_masks,
        },
	[max1031] = {
		.channels = max1031_channels,
		.num_channels = ARRAY_SIZE(max1031_channels),
		.available_scan_masks = max1031_available_scan_masks,
        },
};


struct max1027_state {
	
const struct max1027_chip_info	*info;
	
struct spi_device		*spi;
	
struct iio_trigger		*trig;
	
__be16				*buffer;
	
struct mutex			lock;

	
u8				reg ____cacheline_aligned;
};



static int max1027_read_single_value(struct iio_dev *indio_dev,
				     struct iio_chan_spec const *chan,
				     int *val)
{
	int ret;
	struct max1027_state *st = iio_priv(indio_dev);

	if (iio_buffer_enabled(indio_dev)) {
		dev_warn(&indio_dev->dev, "trigger mode already enabled");
		return -EBUSY;
	}

	/* Start acquisition on conversion register write */
	st->reg = MAX1027_SETUP_REG | MAX1027_REF_MODE2 | MAX1027_CKS_MODE2;
	ret = spi_write(st->spi, &st->reg, 1);
	if (ret < 0) {
		dev_err(&indio_dev->dev,
			"Failed to configure setup register\n");
		return ret;
	}

	/* Configure conversion register with the requested chan */
	st->reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) |
		  MAX1027_NOSCAN | !!(chan->type == IIO_TEMP);
	ret = spi_write(st->spi, &st->reg, 1);
	if (ret < 0) {
		dev_err(&indio_dev->dev,
			"Failed to configure conversion register\n");
		return ret;
	}

	/*
         * For an unknown reason, when we use the mode "10" (write
         * conversion register), the interrupt doesn't occur every time.
         * So we just wait 1 ms.
         */
	mdelay(1);

	/* Read result */
	ret = spi_read(st->spi, st->buffer, (chan->type == IIO_TEMP) ? 4 : 2);
	if (ret < 0)
		return ret;

	*val = be16_to_cpu(st->buffer[0]);

	return IIO_VAL_INT;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 225 100.00% 1 100.00%
Total 225 100.00% 1 100.00%



static int max1027_read_raw(struct iio_dev *indio_dev,
			    struct iio_chan_spec const *chan,
			    int *val, int *val2, long mask)
{
	int ret = 0;
	struct max1027_state *st = iio_priv(indio_dev);

	mutex_lock(&st->lock);

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		ret = max1027_read_single_value(indio_dev, chan, val);
		break;
	case IIO_CHAN_INFO_SCALE:
		switch (chan->type) {
		case IIO_TEMP:
			*val = 1;
			*val2 = 8;
			ret = IIO_VAL_FRACTIONAL;
			break;
		case IIO_VOLTAGE:
			*val = 2500;
			*val2 = 10;
			ret = IIO_VAL_FRACTIONAL_LOG2;
			break;
		default:
			ret = -EINVAL;
			break;
		}
		break;
	default:
		ret = -EINVAL;
		break;
	}

	mutex_unlock(&st->lock);

	return ret;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 145 100.00% 1 100.00%
Total 145 100.00% 1 100.00%



static int max1027_debugfs_reg_access(struct iio_dev *indio_dev,
				      unsigned reg, unsigned writeval,
				      unsigned *readval)
{
	struct max1027_state *st = iio_priv(indio_dev);
	u8 *val = (u8 *)st->buffer;

	if (readval != NULL)
		return -EINVAL;

	*val = (u8)writeval;
	return spi_write(st->spi, val, 1);
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 73 100.00% 1 100.00%
Total 73 100.00% 1 100.00%



static int max1027_validate_trigger(struct iio_dev *indio_dev,
				    struct iio_trigger *trig)
{
	struct max1027_state *st = iio_priv(indio_dev);

	if (st->trig != trig)
		return -EINVAL;

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 41 100.00% 1 100.00%
Total 41 100.00% 1 100.00%



static int max1027_set_trigger_state(struct iio_trigger *trig, bool state)
{
	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
	struct max1027_state *st = iio_priv(indio_dev);
	int ret;

	if (state) {
		/* Start acquisition on cnvst */
		st->reg = MAX1027_SETUP_REG | MAX1027_CKS_MODE0 |
			  MAX1027_REF_MODE2;
		ret = spi_write(st->spi, &st->reg, 1);
		if (ret < 0)
			return ret;

		/* Scan from 0 to max */
		st->reg = MAX1027_CONV_REG | MAX1027_CHAN(0) |
			  MAX1027_SCAN_N_M | MAX1027_TEMP;
		ret = spi_write(st->spi, &st->reg, 1);
		if (ret < 0)
			return ret;
	} else {
		/* Start acquisition on conversion register write */
		st->reg = MAX1027_SETUP_REG | MAX1027_CKS_MODE2	|
			  MAX1027_REF_MODE2;
		ret = spi_write(st->spi, &st->reg, 1);
		if (ret < 0)
			return ret;
	}

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 162 100.00% 1 100.00%
Total 162 100.00% 1 100.00%



static int max1027_validate_device(struct iio_trigger *trig,
				   struct iio_dev *indio_dev)
{
	struct iio_dev *indio = iio_trigger_get_drvdata(trig);

	if (indio != indio_dev)
		return -EINVAL;

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 39 100.00% 1 100.00%
Total 39 100.00% 1 100.00%



static irqreturn_t max1027_trigger_handler(int irq, void *private)
{
	struct iio_poll_func *pf = (struct iio_poll_func *)private;
	struct iio_dev *indio_dev = pf->indio_dev;
	struct max1027_state *st = iio_priv(indio_dev);

	pr_debug("%s(irq=%d, private=0x%p)\n", __func__, irq, private);

	/* fill buffer with all channel */
	spi_read(st->spi, st->buffer, indio_dev->masklength * 2);

	iio_push_to_buffers(indio_dev, st->buffer);

	iio_trigger_notify_done(indio_dev->trig);

	return IRQ_HANDLED;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 92 100.00% 1 100.00%
Total 92 100.00% 1 100.00%


static const struct iio_trigger_ops max1027_trigger_ops = {
	.owner = THIS_MODULE,
	.validate_device = &max1027_validate_device,
	.set_trigger_state = &max1027_set_trigger_state,
};


static const struct iio_info max1027_info = {
	.driver_module = THIS_MODULE,
	.read_raw = &max1027_read_raw,
	.validate_trigger = &max1027_validate_trigger,
	.debugfs_reg_access = &max1027_debugfs_reg_access,
};



static int max1027_probe(struct spi_device *spi)
{
	int ret;
	struct iio_dev *indio_dev;
	struct max1027_state *st;

	pr_debug("%s: probe(spi = 0x%p)\n", __func__, spi);

	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
	if (indio_dev == NULL) {
		pr_err("Can't allocate iio device\n");
		return -ENOMEM;
	}

	spi_set_drvdata(spi, indio_dev);

	st = iio_priv(indio_dev);
	st->spi = spi;
	st->info = &max1027_chip_info_tbl[spi_get_device_id(spi)->driver_data];

	mutex_init(&st->lock);

	indio_dev->name = spi_get_device_id(spi)->name;
	indio_dev->dev.parent = &spi->dev;
	indio_dev->dev.of_node = spi->dev.of_node;
	indio_dev->info = &max1027_info;
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->channels = st->info->channels;
	indio_dev->num_channels = st->info->num_channels;
	indio_dev->available_scan_masks = st->info->available_scan_masks;

	st->buffer = devm_kmalloc(&indio_dev->dev,
				  indio_dev->num_channels * 2,
				  GFP_KERNEL);
	if (st->buffer == NULL) {
		dev_err(&indio_dev->dev, "Can't allocate buffer\n");
		return -ENOMEM;
	}

	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
					 &max1027_trigger_handler, NULL);
	if (ret < 0) {
		dev_err(&indio_dev->dev, "Failed to setup buffer\n");
		return ret;
	}

	st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
							indio_dev->name);
	if (st->trig == NULL) {
		ret = -ENOMEM;
		dev_err(&indio_dev->dev, "Failed to allocate iio trigger\n");
		goto fail_trigger_alloc;
	}

	st->trig->ops = &max1027_trigger_ops;
	st->trig->dev.parent = &spi->dev;
	iio_trigger_set_drvdata(st->trig, indio_dev);
	iio_trigger_register(st->trig);

	ret = devm_request_threaded_irq(&spi->dev, spi->irq,
					iio_trigger_generic_data_rdy_poll,
					NULL,
					IRQF_TRIGGER_FALLING,
					spi->dev.driver->name, st->trig);
	if (ret < 0) {
		dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
		goto fail_dev_register;
	}

	/* Disable averaging */
	st->reg = MAX1027_AVG_REG;
	ret = spi_write(st->spi, &st->reg, 1);
	if (ret < 0) {
		dev_err(&indio_dev->dev, "Failed to configure averaging register\n");
		goto fail_dev_register;
	}

	ret = iio_device_register(indio_dev);
	if (ret < 0) {
		dev_err(&indio_dev->dev, "Failed to register iio device\n");
		goto fail_dev_register;
	}

	return 0;

fail_dev_register:
fail_trigger_alloc:
	iio_triggered_buffer_cleanup(indio_dev);

	return ret;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 477 97.35% 1 33.33%
matthew ranostay matthew ranostay 12 2.45% 1 33.33%
masanari iida masanari iida 1 0.20% 1 33.33%
Total 490 100.00% 3 100.00%



static int max1027_remove(struct spi_device *spi)
{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);

	pr_debug("%s: remove(spi = 0x%p)\n", __func__, spi);

	iio_device_unregister(indio_dev);
	iio_triggered_buffer_cleanup(indio_dev);

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 43 100.00% 1 100.00%
Total 43 100.00% 1 100.00%


static struct spi_driver max1027_driver = {
	.driver = {
		.name	= "max1027",
		.of_match_table = of_match_ptr(max1027_adc_dt_ids),
        },
	.probe		= max1027_probe,
	.remove		= max1027_remove,
	.id_table	= max1027_id,
};

module_spi_driver(max1027_driver);

MODULE_AUTHOR("Philippe Reynes <tremyfr@yahoo.fr>");
MODULE_DESCRIPTION("MAX1027/MAX1029/MAX1031 ADC");
MODULE_LICENSE("GPL v2");
Overall Contributors
Person Tokens Prop Commits CommitProp
philippe reynes philippe reynes 2047 99.08% 1 25.00%
matthew ranostay matthew ranostay 12 0.58% 1 25.00%
javier martinez canillas javier martinez canillas 6 0.29% 1 25.00%
masanari iida masanari iida 1 0.05% 1 25.00%
Total 2066 100.00% 4 100.00%
  Directory: drivers/iio/adc

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
	Person	Tokens	Prop	Commits	CommitProp
philippe reynes	philippe reynes	225	100.00%	1	100.00%
	Total	225	100.00%	1	100.00%
cregit-Linux how code gets into the kernel

Release 4.8 drivers/iio/adc/max1027.c

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Overall Contributors
