Release 4.8 drivers/usb/dwc3/dwc3-pci.c

/**
 * dwc3-pci.c - PCI Specific glue layer
 *
 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
 *
 * Authors: Felipe Balbi <balbi@ti.com>,
 *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2  of
 * the License as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <linux/acpi.h>
#include <linux/delay.h>


#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd

#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce

#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31	0xabcf

#define PCI_DEVICE_ID_INTEL_BYT			0x0f37

#define PCI_DEVICE_ID_INTEL_MRFLD		0x119e

#define PCI_DEVICE_ID_INTEL_BSW			0x22b7

#define PCI_DEVICE_ID_INTEL_SPTLP		0x9d30

#define PCI_DEVICE_ID_INTEL_SPTH		0xa130

#define PCI_DEVICE_ID_INTEL_BXT			0x0aaa

#define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa

#define PCI_DEVICE_ID_INTEL_APL			0x5aaa

#define PCI_DEVICE_ID_INTEL_KBP			0xa2b0


static const struct acpi_gpio_params reset_gpios = { 0, 0, false };

static const struct acpi_gpio_params cs_gpios = { 1, 0, false };


static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
	{ "reset-gpios", &reset_gpios, 1 },
	{ "cs-gpios", &cs_gpios, 1 },
	{ },
};



static int dwc3_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc3)
{
	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
		struct property_entry properties[] = {
			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
			PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
			PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
			PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
			PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
			PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
			PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
			PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
			PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
			PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
			PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
			/*
                         * FIXME these quirks should be removed when AMD NL
                         * tapes out
                         */
			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
			{ },
                };

		return platform_device_add_properties(dwc3, properties);
	}

	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
		int ret;

		struct property_entry properties[] = {
			PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
			{ }
		};

		ret = platform_device_add_properties(dwc3, properties);
		if (ret < 0)
			return ret;

		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
			struct gpio_desc *gpio;

			acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
					acpi_dwc3_byt_gpios);

			/*
                         * These GPIOs will turn on the USB2 PHY. Note that we have to
                         * put the gpio descriptors again here because the phy driver
                         * might want to grab them, too.
                         */
			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
			if (IS_ERR(gpio))
				return PTR_ERR(gpio);

			gpiod_set_value_cansleep(gpio, 1);
			gpiod_put(gpio);

			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
			if (IS_ERR(gpio))
				return PTR_ERR(gpio);

			if (gpio) {
				gpiod_set_value_cansleep(gpio, 1);
				gpiod_put(gpio);
				usleep_range(10000, 11000);
			}
		}
	}

	if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
	    (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
		struct property_entry properties[] = {
			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
			{ },
                };

		return platform_device_add_properties(dwc3, properties);
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
heikki krogerus
heikki krogerus
252
70.79%
4
50.00%
felipe balbi
felipe balbi
47
13.20%
2
25.00%
john youn
john youn
40
11.24%
1
12.50%
uwe kleine-koenig
uwe kleine-koenig
17
4.78%
1
12.50%
Total
356
100.00%
8
100.00%



static int dwc3_pci_probe(struct pci_dev *pci,
		const struct pci_device_id *id)
{
	struct resource		res[2];
	struct platform_device	*dwc3;
	int			ret;
	struct device		*dev = &pci->dev;

	ret = pcim_enable_device(pci);
	if (ret) {
		dev_err(dev, "failed to enable pci device\n");
		return -ENODEV;
	}

	pci_set_master(pci);

	dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
	if (!dwc3) {
		dev_err(dev, "couldn't allocate dwc3 device\n");
		return -ENOMEM;
	}

	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));

	res[0].start	= pci_resource_start(pci, 0);
	res[0].end	= pci_resource_end(pci, 0);
	res[0].name	= "dwc_usb3";
	res[0].flags	= IORESOURCE_MEM;

	res[1].start	= pci->irq;
	res[1].name	= "dwc_usb3";
	res[1].flags	= IORESOURCE_IRQ;

	ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
	if (ret) {
		dev_err(dev, "couldn't add resources to dwc3 device\n");
		return ret;
	}

	dwc3->dev.parent = dev;
	ACPI_COMPANION_SET(&dwc3->dev, ACPI_COMPANION(dev));

	ret = dwc3_pci_quirks(pci, dwc3);
	if (ret)
		goto err;

	ret = platform_device_add(dwc3);
	if (ret) {
		dev_err(dev, "failed to register dwc3 device\n");
		goto err;
	}

	device_init_wakeup(dev, true);
	device_set_run_wake(dev, true);
	pci_set_drvdata(pci, dwc3);
	pm_runtime_put(dev);

	return 0;
err:
	platform_device_put(dwc3);
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
261
81.56%
4
36.36%
heikki krogerus
heikki krogerus
38
11.88%
4
36.36%
chanho park
chanho park
14
4.38%
1
9.09%
andy shevchenko
andy shevchenko
6
1.88%
1
9.09%
sebastian andrzej siewior
sebastian andrzej siewior
1
0.31%
1
9.09%
Total
320
100.00%
11
100.00%



static void dwc3_pci_remove(struct pci_dev *pci)
{
	device_init_wakeup(&pci->dev, false);
	pm_runtime_get(&pci->dev);
	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
	platform_device_unregister(pci_get_drvdata(pci));
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
35
72.92%
3
60.00%
heikki krogerus
heikki krogerus
13
27.08%
2
40.00%
Total
48
100.00%
5
100.00%


static const struct pci_device_id dwc3_pci_id_table[] = {
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
        },
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
        },
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
        },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
	{  }	/* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);

#ifdef CONFIG_PM


static int dwc3_pci_runtime_suspend(struct device *dev)
{
	if (device_run_wake(dev))
		return 0;

	return -EBUSY;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
25
100.00%
1
100.00%
Total
25
100.00%
1
100.00%



static int dwc3_pci_runtime_resume(struct device *dev)
{
	struct platform_device *dwc3 = dev_get_drvdata(dev);

	return pm_runtime_get(&dwc3->dev);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
30
100.00%
1
100.00%
Total
30
100.00%
1
100.00%

#endif /* CONFIG_PM */

#ifdef CONFIG_PM_SLEEP


static int dwc3_pci_pm_dummy(struct device *dev)
{
	/*
         * There's nothing to do here. No, seriously. Everything is either taken
         * care either by PCI subsystem or dwc3/core.c, so we have nothing
         * missing here.
         *
         * So you'd think we didn't need this at all, but PCI subsystem will
         * bail out if we don't have a valid callback :-s
         */
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
15
100.00%
1
100.00%
Total
15
100.00%
1
100.00%

#endif /* CONFIG_PM_SLEEP */


static struct dev_pm_ops dwc3_pci_dev_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy)
	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume,
		NULL)
};


static struct pci_driver dwc3_pci_driver = {
	.name		= "dwc3-pci",
	.id_table	= dwc3_pci_id_table,
	.probe		= dwc3_pci_probe,
	.remove		= dwc3_pci_remove,
	.driver		= {
		.pm	= &dwc3_pci_dev_pm_ops,
        }
};

MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");


module_pci_driver(dwc3_pci_driver);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
felipe balbi
felipe balbi
548
47.45%
10
28.57%
heikki krogerus
heikki krogerus
458
39.65%
11
31.43%
john youn
john youn
67
5.80%
4
11.43%
uwe kleine-koenig
uwe kleine-koenig
17
1.47%
1
2.86%
chanho park
chanho park
14
1.21%
1
2.86%
david cohen
david cohen
13
1.13%
1
2.86%
alan cox
alan cox
12
1.04%
1
2.86%
huang rui
huang rui
9
0.78%
1
2.86%
andy shevchenko
andy shevchenko
6
0.52%
1
2.86%
jingoo han
jingoo han
6
0.52%
1
2.86%
stephen rothwell
stephen rothwell
3
0.26%
1
2.86%
greg kroah-hartman
greg kroah-hartman
1
0.09%
1
2.86%
sebastian andrzej siewior
sebastian andrzej siewior
1
0.09%
1
2.86%
Total
1155
100.00%
35
100.00%
  
Directory: drivers/usb/dwc3

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.