Release 4.9 arch/arm/mach-omap2/serial.c

/*
 * arch/arm/mach-omap2/serial.c
 *
 * OMAP2 serial support.
 *
 * Copyright (C) 2005-2008 Nokia Corporation
 * Author: Paul Mundt <paul.mundt@nokia.com>
 *
 * Major rework for PM support by Kevin Hilman
 *
 * Based off of arch/arm/mach-omap/omap1/serial.c
 *
 * Copyright (C) 2009 Texas Instruments
 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License. See the file "COPYING" in the main directory of this archive
 * for more details.
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
#include <linux/omap-dma.h>
#include <linux/platform_data/serial-omap.h>

#include "common.h"
#include "omap_hwmod.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "soc.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
#include "serial.h"

/*
 * NOTE: By default the serial auto_suspend timeout is disabled as it causes
 * lost characters over the serial ports. This means that the UART clocks will
 * stay on until power/autosuspend_delay is set for the uart from sysfs.
 * This also causes that any deeper omap sleep states are blocked.
 */

#define DEFAULT_AUTOSUSPEND_DELAY	-1


#define MAX_UART_HWMOD_NAME_LEN		16


struct omap_uart_state {
	
int num;

	
struct list_head node;
	
struct omap_hwmod *oh;
	
struct omap_device_pad default_omap_uart_pads[2];
};

static LIST_HEAD(uart_list);

static u8 num_uarts;

static u8 console_uart_id = -1;

static u8 uart_debug;


#define DEFAULT_RXDMA_POLLRATE		1	
/* RX DMA polling rate (us) */

#define DEFAULT_RXDMA_BUFSIZE		4096	
/* RX DMA buffer size */

#define DEFAULT_RXDMA_TIMEOUT		(3 * HZ)
/* RX DMA timeout (jiffies) */


static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
	{
		.dma_enabled	= false,
		.dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
		.dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
		.dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
		.autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
        },
};

#ifdef CONFIG_PM


static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct omap_device *od = to_omap_device(pdev);

	if (!od)
		return;

	if (enable)
		omap_hwmod_enable_wakeup(od->hwmods[0]);
	else
		omap_hwmod_disable_wakeup(od->hwmods[0]);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
27
41.54%
1
33.33%
kevin hilman
kevin hilman
26
40.00%
1
33.33%
felipe balbi
felipe balbi
12
18.46%
1
33.33%
Total
65
100.00%
3
100.00%

#else


static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
11
84.62%
1
50.00%
felipe balbi
felipe balbi
2
15.38%
1
50.00%
Total
13
100.00%
2
100.00%

#endif /* CONFIG_PM */

#ifdef CONFIG_OMAP_MUX


#define OMAP_UART_DEFAULT_PAD_NAME_LEN	28

static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
		
tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;


static void  __init

omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
				struct omap_uart_state *uart)
{
	uart->default_omap_uart_pads[0].name = rx_pad_name;
	uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
							OMAP_DEVICE_PAD_WAKEUP;
	uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
							OMAP_MUX_MODE0;
	uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
	uart->default_omap_uart_pads[1].name = tx_pad_name;
	uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
							OMAP_MUX_MODE0;
	bdata->pads = uart->default_omap_uart_pads;
	bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
110
100.00%
2
100.00%
Total
110
100.00%
2
100.00%



static void  __init omap_serial_check_wakeup(struct omap_board_data *bdata,
						struct omap_uart_state *uart)
{
	struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
	struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
	char *rx_fmt, *tx_fmt;
	int uart_nr = bdata->id + 1;

	if (bdata->id != 2) {
		rx_fmt = "uart%d_rx.uart%d_rx";
		tx_fmt = "uart%d_tx.uart%d_tx";
	} else {
		rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
		tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
	}

	snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
			uart_nr, uart_nr);
	snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
			uart_nr, uart_nr);

	if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
			omap_mux_get_by_name
				(tx_pad_name, &tx_partition, &tx_mux) >= 0) {
		u16 tx_mode, rx_mode;

		tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
		rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);

		/*
                 * Check if uart is used in default tx/rx mode i.e. in mux mode0
                 * if yes then configure rx pin for wake up capability
                 */
		if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
			omap_serial_fill_uart_tx_rx_pads(bdata, uart);
	}
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
189
100.00%
1
100.00%
Total
189
100.00%
1
100.00%

#else


static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
		struct omap_uart_state *uart)
{
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
16
100.00%
2
100.00%
Total
16
100.00%
2
100.00%

#endif



static char *cmdline_find_option(char *str)
{
	extern char *saved_command_line;

	return strstr(saved_command_line, str);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
23
95.83%
1
50.00%
paul walmsley
paul walmsley
1
4.17%
1
50.00%
Total
24
100.00%
2
100.00%



static int __init omap_serial_early_init(void)
{
	if (of_have_populated_dt())
		return -ENODEV;

	do {
		char oh_name[MAX_UART_HWMOD_NAME_LEN];
		struct omap_hwmod *oh;
		struct omap_uart_state *uart;
		char uart_name[MAX_UART_HWMOD_NAME_LEN];

		snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
			 "uart%d", num_uarts + 1);
		oh = omap_hwmod_lookup(oh_name);
		if (!oh)
			break;

		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
		if (WARN_ON(!uart))
			return -ENODEV;

		uart->oh = oh;
		uart->num = num_uarts++;
		list_add_tail(&uart->node, &uart_list);
		snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
				"%s%d", OMAP_SERIAL_NAME, uart->num);

		if (cmdline_find_option(uart_name)) {
			console_uart_id = uart->num;

			if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) {
				uart_debug = true;
				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
					uart_name, uart->num);
			}
		}
	} while (1);

	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
kevin hilman
kevin hilman
91
50.84%
2
14.29%
govindraj raja
govindraj raja
57
31.84%
4
28.57%
tony lindgren
tony lindgren
19
10.61%
3
21.43%
thomas weber
thomas weber
8
4.47%
1
7.14%
paul walmsley
paul walmsley
2
1.12%
2
14.29%
alexander kuleshov
alexander kuleshov
1
0.56%
1
7.14%
jouni hogander
jouni hogander
1
0.56%
1
7.14%
Total
179
100.00%
14
100.00%


omap_postcore_initcall(omap_serial_early_init);

/**
 * omap_serial_init_port() - initialize single serial port
 * @bdata: port specific board data pointer
 * @info: platform specific data pointer
 *
 * This function initialies serial driver for given port only.
 * Platforms can call this function instead of omap_serial_init()
 * if they don't plan to use all available UARTs as serial ports.
 *
 * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
 * use only one of the two.
 */


void __init omap_serial_init_port(struct omap_board_data *bdata,
			struct omap_uart_port_info *info)
{
	struct omap_uart_state *uart;
	struct omap_hwmod *oh;
	struct platform_device *pdev;
	void *pdata = NULL;
	u32 pdata_size = 0;
	char *name;
	struct omap_uart_port_info omap_up;

	if (WARN_ON(!bdata))
		return;
	if (WARN_ON(bdata->id < 0))
		return;
	if (WARN_ON(bdata->id >= num_uarts))
		return;

	list_for_each_entry(uart, &uart_list, node)
		if (bdata->id == uart->num)
			break;
	if (!info)
		info = omap_serial_default_info;

	oh = uart->oh;
	name = OMAP_SERIAL_DRIVER_NAME;

	omap_up.dma_enabled = info->dma_enabled;
	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
	omap_up.flags = UPF_BOOT_AUTOCONF;
	omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
	omap_up.enable_wakeup = omap_uart_enable_wakeup;
	omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
	omap_up.dma_rx_timeout = info->dma_rx_timeout;
	omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
	omap_up.autosuspend_timeout = info->autosuspend_timeout;

	pdata = &omap_up;
	pdata_size = sizeof(struct omap_uart_port_info);

	if (WARN_ON(!oh))
		return;

	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size);
	if (IS_ERR(pdev)) {
		WARN(1, "Could not build omap_device for %s: %s.\n", name,
		     oh->name);
		return;
	}

	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);

	if (console_uart_id == bdata->id) {
		omap_device_enable(pdev);
		pm_runtime_set_active(&pdev->dev);
	}

	oh->dev_attr = uart;

	if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
			&& !uart_debug)
		device_init_wakeup(&pdev->dev, true);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
kevin hilman
kevin hilman
182
56.52%
5
22.73%
tony lindgren
tony lindgren
39
12.11%
2
9.09%
deepak k
deepak k
39
12.11%
1
4.55%
govindraj raja
govindraj raja
23
7.14%
5
22.73%
paul walmsley
paul walmsley
10
3.11%
2
9.09%
sergio aguirre
sergio aguirre
9
2.80%
2
9.09%
jon hunter
jon hunter
8
2.48%
1
4.55%
mika westerberg
mika westerberg
7
2.17%
1
4.55%
jouni hogander
jouni hogander
3
0.93%
1
4.55%
jean delvare
jean delvare
1
0.31%
1
4.55%
alexander shishkin
alexander shishkin
1
0.31%
1
4.55%
Total
322
100.00%
22
100.00%

/**
 * omap_serial_board_init() - initialize all supported serial ports
 * @info: platform specific data pointer
 *
 * Initializes all available UARTs as serial ports. Platforms
 * can call this function when they want to have default behaviour
 * for serial ports (e.g initialize them all as serial ports).
 */


void __init omap_serial_board_init(struct omap_uart_port_info *info)
{
	struct omap_uart_state *uart;
	struct omap_board_data bdata;

	list_for_each_entry(uart, &uart_list, node) {
		bdata.id = uart->num;
		bdata.flags = 0;
		bdata.pads = NULL;
		bdata.pads_cnt = 0;

		omap_serial_check_wakeup(&bdata, uart);

		if (!info)
			omap_serial_init_port(&bdata, NULL);
		else
			omap_serial_init_port(&bdata, &info[uart->num]);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
tony lindgren
tony lindgren
36
39.13%
3
37.50%
deepak k
deepak k
27
29.35%
1
12.50%
kevin hilman
kevin hilman
13
14.13%
1
12.50%
govindraj raja
govindraj raja
8
8.70%
2
25.00%
mika westerberg
mika westerberg
8
8.70%
1
12.50%
Total
92
100.00%
8
100.00%

/**
 * omap_serial_init() - initialize all supported serial ports
 *
 * Initializes all available UARTs.
 * Platforms can call this function when they want to have default behaviour
 * for serial ports (e.g initialize them all as serial ports).
 */


void __init omap_serial_init(void)
{
	omap_serial_board_init(NULL);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
deepak k
deepak k
13
100.00%
1
100.00%
Total
13
100.00%
1
100.00%

Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
govindraj raja
govindraj raja
517
41.76%
10
19.23%
kevin hilman
kevin hilman
365
29.48%
6
11.54%
tony lindgren
tony lindgren
133
10.74%
14
26.92%
deepak k
deepak k
125
10.10%
1
1.92%
paul walmsley
paul walmsley
21
1.70%
7
13.46%
jon hunter
jon hunter
19
1.53%
1
1.92%
mika westerberg
mika westerberg
15
1.21%
1
1.92%
felipe balbi
felipe balbi
14
1.13%
1
1.92%
sergio aguirre
sergio aguirre
9
0.73%
2
3.85%
thomas weber
thomas weber
8
0.65%
1
1.92%
jouni hogander
jouni hogander
4
0.32%
2
3.85%
santosh shilimkar
santosh shilimkar
3
0.24%
1
1.92%
russell king
russell king
2
0.16%
2
3.85%
jean delvare
jean delvare
1
0.08%
1
1.92%
alexander shishkin
alexander shishkin
1
0.08%
1
1.92%
alexander kuleshov
alexander kuleshov
1
0.08%
1
1.92%
Total
1238
100.00%
52
100.00%
  
Directory: arch/arm/mach-omap2