| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Jeff Garzik | 811 | 70.16% | 5 | 16.13% |
| Alan Cox | 165 | 14.27% | 5 | 16.13% |
| Tejun Heo | 164 | 14.19% | 14 | 45.16% |
| Erik Inge Bolsö | 4 | 0.35% | 1 | 3.23% |
| Andrew Morton | 3 | 0.26% | 1 | 3.23% |
| Akira Iguchi | 3 | 0.26% | 1 | 3.23% |
| Bartlomiej Zolnierkiewicz | 3 | 0.26% | 1 | 3.23% |
| Randy Dunlap | 1 | 0.09% | 1 | 3.23% |
| Jingoo Han | 1 | 0.09% | 1 | 3.23% |
| Axel Lin | 1 | 0.09% | 1 | 3.23% |
| Total | 1156 | 31 |
/* * pata-cs5530.c - CS5530 PATA for new ATA layer * (C) 2005 Red Hat Inc * * based upon cs5530.c by Mark Lord. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Loosely based on the piix & svwks drivers. * * Documentation: * Available from AMD web site. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #include <linux/dmi.h> #define DRV_NAME "pata_cs5530" #define DRV_VERSION "0.7.4" static void __iomem *cs5530_port_base(struct ata_port *ap) { unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr; return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no); } /** * cs5530_set_piomode - PIO setup * @ap: ATA interface * @adev: device on the interface * * Set our PIO requirements. This is fairly simple on the CS5530 * chips. */ static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const unsigned int cs5530_pio_timings[2][5] = { {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} }; void __iomem *base = cs5530_port_base(ap); u32 tuning; int format; /* Find out which table to use */ tuning = ioread32(base + 0x04); format = (tuning & 0x80000000UL) ? 1 : 0; /* Now load the right timing register */ if (adev->devno) base += 0x08; iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); } /** * cs5530_set_dmamode - DMA timing setup * @ap: ATA interface * @adev: Device being configured * * We cannot mix MWDMA and UDMA without reloading timings each switch * master to slave. We track the last DMA setup in order to minimise * reloads. */ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) { void __iomem *base = cs5530_port_base(ap); u32 tuning, timing = 0; u8 reg; /* Find out which table to use */ tuning = ioread32(base + 0x04); switch(adev->dma_mode) { case XFER_UDMA_0: timing = 0x00921250;break; case XFER_UDMA_1: timing = 0x00911140;break; case XFER_UDMA_2: timing = 0x00911030;break; case XFER_MW_DMA_0: timing = 0x00077771;break; case XFER_MW_DMA_1: timing = 0x00012121;break; case XFER_MW_DMA_2: timing = 0x00002020;break; default: BUG(); } /* Merge in the PIO format bit */ timing |= (tuning & 0x80000000UL); if (adev->devno == 0) /* Master */ iowrite32(timing, base + 0x04); else { if (timing & 0x00100000) tuning |= 0x00100000; /* UDMA for both */ else tuning &= ~0x00100000; /* MWDMA for both */ iowrite32(tuning, base + 0x04); iowrite32(timing, base + 0x0C); } /* Set the DMA capable bit in the BMDMA area */ reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); reg |= (1 << (5 + adev->devno)); iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); /* Remember the last DMA setup we did */ ap->private_data = adev; } /** * cs5530_qc_issue - command issue * @qc: command pending * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if * necessary. Specifically we have a problem that there is only * one MWDMA/UDMA bit. */ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct ata_device *prev = ap->private_data; /* See if the DMA settings could be wrong */ if (ata_dma_enabled(adev) && adev != prev && prev != NULL) { /* Maybe, but do the channels match MWDMA/UDMA ? */ if ((ata_using_udma(adev) && !ata_using_udma(prev)) || (ata_using_udma(prev) && !ata_using_udma(adev))) /* Switch the mode bits */ cs5530_set_dmamode(ap, adev); } return ata_bmdma_qc_issue(qc); } static struct scsi_host_template cs5530_sht = { ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, }; static struct ata_port_operations cs5530_port_ops = { .inherits = &ata_bmdma_port_ops, .qc_prep = ata_bmdma_dumb_qc_prep, .qc_issue = cs5530_qc_issue, .cable_detect = ata_cable_40wire, .set_piomode = cs5530_set_piomode, .set_dmamode = cs5530_set_dmamode, }; static const struct dmi_system_id palmax_dmi_table[] = { { .ident = "Palmax PD1100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"), DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"), }, }, { } }; static int cs5530_is_palmax(void) { if (dmi_check_system(palmax_dmi_table)) { printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n"); return 1; } return 0; } /** * cs5530_init_chip - Chipset init * * Perform the chip initialisation work that is shared between both * setup and resume paths */ static int cs5530_init_chip(void) { struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL; while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { switch (dev->device) { case PCI_DEVICE_ID_CYRIX_PCI_MASTER: master_0 = pci_dev_get(dev); break; case PCI_DEVICE_ID_CYRIX_5530_LEGACY: cs5530_0 = pci_dev_get(dev); break; } } if (!master_0) { printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); goto fail_put; } if (!cs5530_0) { printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); goto fail_put; } pci_set_master(cs5530_0); pci_try_set_mwi(cs5530_0); /* * Set PCI CacheLineSize to 16-bytes: * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 * * Note: This value is constant because the 5530 is only a Geode companion */ pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); /* * Disable trapping of UDMA register accesses (Win98 hack): * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 */ pci_write_config_word(cs5530_0, 0xd0, 0x5006); /* * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: * The other settings are what is necessary to get the register * into a sane state for IDE DMA operation. */ pci_write_config_byte(master_0, 0x40, 0x1e); /* * Set max PCI burst size (16-bytes seems to work best): * 16bytes: set bit-1 at 0x41 (reg value of 0x16) * all others: clear bit-1 at 0x41, and do: * 128bytes: OR 0x00 at 0x41 * 256bytes: OR 0x04 at 0x41 * 512bytes: OR 0x08 at 0x41 * 1024bytes: OR 0x0c at 0x41 */ pci_write_config_byte(master_0, 0x41, 0x14); /* * These settings are necessary to get the chip * into a sane state for IDE DMA operation. */ pci_write_config_byte(master_0, 0x42, 0x00); pci_write_config_byte(master_0, 0x43, 0xc1); pci_dev_put(master_0); pci_dev_put(cs5530_0); return 0; fail_put: pci_dev_put(master_0); pci_dev_put(cs5530_0); return -ENODEV; } /** * cs5530_init_one - Initialise a CS5530 * @dev: PCI device * @id: Entry in match table * * Install a driver for the newly found CS5530 companion chip. Most of * this is just housekeeping. We have to set the chip up correctly and * turn off various bits of emulation magic. */ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &cs5530_port_ops }; /* The docking connector doesn't do UDMA, and it seems not MWDMA */ static const struct ata_port_info info_palmax_secondary = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .port_ops = &cs5530_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; int rc; rc = pcim_enable_device(pdev); if (rc) return rc; /* Chip initialisation */ if (cs5530_init_chip()) return -ENODEV; if (cs5530_is_palmax()) ppi[1] = &info_palmax_secondary; /* Now kick off ATA set up */ return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0); } #ifdef CONFIG_PM_SLEEP static int cs5530_reinit_one(struct pci_dev *pdev) { struct ata_host *host = pci_get_drvdata(pdev); int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; /* If we fail on resume we are doomed */ if (cs5530_init_chip()) return -EIO; ata_host_resume(host); return 0; } #endif /* CONFIG_PM_SLEEP */ static const struct pci_device_id cs5530[] = { { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), }, { }, }; static struct pci_driver cs5530_pci_driver = { .name = DRV_NAME, .id_table = cs5530, .probe = cs5530_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM_SLEEP .suspend = ata_pci_device_suspend, .resume = cs5530_reinit_one, #endif }; module_pci_driver(cs5530_pci_driver); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, cs5530); MODULE_VERSION(DRV_VERSION);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1