| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Eli Billauer | 8256 | 99.65% | 26 | 81.25% |
| Richard Weinberger | 14 | 0.17% | 1 | 3.12% |
| Linus Torvalds | 8 | 0.10% | 1 | 3.12% |
| Al Viro | 2 | 0.02% | 1 | 3.12% |
| Kees Cook | 2 | 0.02% | 1 | 3.12% |
| Masanari Iida | 2 | 0.02% | 1 | 3.12% |
| Ebru Akagunduz | 1 | 0.01% | 1 | 3.12% |
| Total | 8285 | 32 |
/* * linux/drivers/misc/xillybus_core.c * * Copyright 2011 Xillybus Ltd, http://xillybus.com * * Driver for the Xillybus FPGA/host framework. * * This driver interfaces with a special IP core in an FPGA, setting up * a pipe between a hardware FIFO in the programmable logic and a device * file in the host. The number of such pipes and their attributes are * set up on the logic. This driver detects these automatically and * creates the device files accordingly. * * This program is free software; you can redistribute it and/or modify * it under the smems of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. */ #include <linux/list.h> #include <linux/device.h> #include <linux/module.h> #include <linux/io.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/fs.h> #include <linux/cdev.h> #include <linux/spinlock.h> #include <linux/mutex.h> #include <linux/crc32.h> #include <linux/poll.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/workqueue.h> #include "xillybus.h" MODULE_DESCRIPTION("Xillybus core functions"); MODULE_AUTHOR("Eli Billauer, Xillybus Ltd."); MODULE_VERSION("1.07"); MODULE_ALIAS("xillybus_core"); MODULE_LICENSE("GPL v2"); /* General timeout is 100 ms, rx timeout is 10 ms */ #define XILLY_RX_TIMEOUT (10*HZ/1000) #define XILLY_TIMEOUT (100*HZ/1000) #define fpga_msg_ctrl_reg 0x0008 #define fpga_dma_control_reg 0x0020 #define fpga_dma_bufno_reg 0x0024 #define fpga_dma_bufaddr_lowaddr_reg 0x0028 #define fpga_dma_bufaddr_highaddr_reg 0x002c #define fpga_buf_ctrl_reg 0x0030 #define fpga_buf_offset_reg 0x0034 #define fpga_endian_reg 0x0040 #define XILLYMSG_OPCODE_RELEASEBUF 1 #define XILLYMSG_OPCODE_QUIESCEACK 2 #define XILLYMSG_OPCODE_FIFOEOF 3 #define XILLYMSG_OPCODE_FATAL_ERROR 4 #define XILLYMSG_OPCODE_NONEMPTY 5 static const char xillyname[] = "xillybus"; static struct class *xillybus_class; /* * ep_list_lock is the last lock to be taken; No other lock requests are * allowed while holding it. It merely protects list_of_endpoints, and not * the endpoints listed in it. */ static LIST_HEAD(list_of_endpoints); static struct mutex ep_list_lock; static struct workqueue_struct *xillybus_wq; /* * Locking scheme: Mutexes protect invocations of character device methods. * If both locks are taken, wr_mutex is taken first, rd_mutex second. * * wr_spinlock protects wr_*_buf_idx, wr_empty, wr_sleepy, wr_ready and the * buffers' end_offset fields against changes made by IRQ handler (and in * theory, other file request handlers, but the mutex handles that). Nothing * else. * They are held for short direct memory manipulations. Needless to say, * no mutex locking is allowed when a spinlock is held. * * rd_spinlock does the same with rd_*_buf_idx, rd_empty and end_offset. * * register_mutex is endpoint-specific, and is held when non-atomic * register operations are performed. wr_mutex and rd_mutex may be * held when register_mutex is taken, but none of the spinlocks. Note that * register_mutex doesn't protect against sporadic buf_ctrl_reg writes * which are unrelated to buf_offset_reg, since they are harmless. * * Blocking on the wait queues is allowed with mutexes held, but not with * spinlocks. * * Only interruptible blocking is allowed on mutexes and wait queues. * * All in all, the locking order goes (with skips allowed, of course): * wr_mutex -> rd_mutex -> register_mutex -> wr_spinlock -> rd_spinlock */ static void malformed_message(struct xilly_endpoint *endpoint, u32 *buf) { int opcode; int msg_channel, msg_bufno, msg_data, msg_dir; opcode = (buf[0] >> 24) & 0xff; msg_dir = buf[0] & 1; msg_channel = (buf[0] >> 1) & 0x7ff; msg_bufno = (buf[0] >> 12) & 0x3ff; msg_data = buf[1] & 0xfffffff; dev_warn(endpoint->dev, "Malformed message (skipping): opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n", opcode, msg_channel, msg_dir, msg_bufno, msg_data); } /* * xillybus_isr assumes the interrupt is allocated exclusively to it, * which is the natural case MSI and several other hardware-oriented * interrupts. Sharing is not allowed. */ irqreturn_t xillybus_isr(int irq, void *data) { struct xilly_endpoint *ep = data; u32 *buf; unsigned int buf_size; int i; int opcode; unsigned int msg_channel, msg_bufno, msg_data, msg_dir; struct xilly_channel *channel; buf = ep->msgbuf_addr; buf_size = ep->msg_buf_size/sizeof(u32); ep->ephw->hw_sync_sgl_for_cpu(ep, ep->msgbuf_dma_addr, ep->msg_buf_size, DMA_FROM_DEVICE); for (i = 0; i < buf_size; i += 2) { if (((buf[i+1] >> 28) & 0xf) != ep->msg_counter) { malformed_message(ep, &buf[i]); dev_warn(ep->dev, "Sending a NACK on counter %x (instead of %x) on entry %d\n", ((buf[i+1] >> 28) & 0xf), ep->msg_counter, i/2); if (++ep->failed_messages > 10) { dev_err(ep->dev, "Lost sync with interrupt messages. Stopping.\n"); } else { ep->ephw->hw_sync_sgl_for_device( ep, ep->msgbuf_dma_addr, ep->msg_buf_size, DMA_FROM_DEVICE); iowrite32(0x01, /* Message NACK */ ep->registers + fpga_msg_ctrl_reg); } return IRQ_HANDLED; } else if (buf[i] & (1 << 22)) /* Last message */ break; } if (i >= buf_size) { dev_err(ep->dev, "Bad interrupt message. Stopping.\n"); return IRQ_HANDLED; } buf_size = i + 2; for (i = 0; i < buf_size; i += 2) { /* Scan through messages */ opcode = (buf[i] >> 24) & 0xff; msg_dir = buf[i] & 1; msg_channel = (buf[i] >> 1) & 0x7ff; msg_bufno = (buf[i] >> 12) & 0x3ff; msg_data = buf[i+1] & 0xfffffff; switch (opcode) { case XILLYMSG_OPCODE_RELEASEBUF: if ((msg_channel > ep->num_channels) || (msg_channel == 0)) { malformed_message(ep, &buf[i]); break; } channel = ep->channels[msg_channel]; if (msg_dir) { /* Write channel */ if (msg_bufno >= channel->num_wr_buffers) { malformed_message(ep, &buf[i]); break; } spin_lock(&channel->wr_spinlock); channel->wr_buffers[msg_bufno]->end_offset = msg_data; channel->wr_fpga_buf_idx = msg_bufno; channel->wr_empty = 0; channel->wr_sleepy = 0; spin_unlock(&channel->wr_spinlock); wake_up_interruptible(&channel->wr_wait); } else { /* Read channel */ if (msg_bufno >= channel->num_rd_buffers) { malformed_message(ep, &buf[i]); break; } spin_lock(&channel->rd_spinlock); channel->rd_fpga_buf_idx = msg_bufno; channel->rd_full = 0; spin_unlock(&channel->rd_spinlock); wake_up_interruptible(&channel->rd_wait); if (!channel->rd_synchronous) queue_delayed_work( xillybus_wq, &channel->rd_workitem, XILLY_RX_TIMEOUT); } break; case XILLYMSG_OPCODE_NONEMPTY: if ((msg_channel > ep->num_channels) || (msg_channel == 0) || (!msg_dir) || !ep->channels[msg_channel]->wr_supports_nonempty) { malformed_message(ep, &buf[i]); break; } channel = ep->channels[msg_channel]; if (msg_bufno >= channel->num_wr_buffers) { malformed_message(ep, &buf[i]); break; } spin_lock(&channel->wr_spinlock); if (msg_bufno == channel->wr_host_buf_idx) channel->wr_ready = 1; spin_unlock(&channel->wr_spinlock); wake_up_interruptible(&channel->wr_ready_wait); break; case XILLYMSG_OPCODE_QUIESCEACK: ep->idtlen = msg_data; wake_up_interruptible(&ep->ep_wait); break; case XILLYMSG_OPCODE_FIFOEOF: if ((msg_channel > ep->num_channels) || (msg_channel == 0) || (!msg_dir) || !ep->channels[msg_channel]->num_wr_buffers) { malformed_message(ep, &buf[i]); break; } channel = ep->channels[msg_channel]; spin_lock(&channel->wr_spinlock); channel->wr_eof = msg_bufno; channel->wr_sleepy = 0; channel->wr_hangup = channel->wr_empty && (channel->wr_host_buf_idx == msg_bufno); spin_unlock(&channel->wr_spinlock); wake_up_interruptible(&channel->wr_wait); break; case XILLYMSG_OPCODE_FATAL_ERROR: ep->fatal_error = 1; wake_up_interruptible(&ep->ep_wait); /* For select() */ dev_err(ep->dev, "FPGA reported a fatal error. This means that the low-level communication with the device has failed. This hardware problem is most likely unrelated to Xillybus (neither kernel module nor FPGA core), but reports are still welcome. All I/O is aborted.\n"); break; default: malformed_message(ep, &buf[i]); break; } } ep->ephw->hw_sync_sgl_for_device(ep, ep->msgbuf_dma_addr, ep->msg_buf_size, DMA_FROM_DEVICE); ep->msg_counter = (ep->msg_counter + 1) & 0xf; ep->failed_messages = 0; iowrite32(0x03, ep->registers + fpga_msg_ctrl_reg); /* Message ACK */ return IRQ_HANDLED; } EXPORT_SYMBOL(xillybus_isr); /* * A few trivial memory management functions. * NOTE: These functions are used only on probe and remove, and therefore * no locks are applied! */ static void xillybus_autoflush(struct work_struct *work); struct xilly_alloc_state { void *salami; int left_of_salami; int nbuffer; enum dma_data_direction direction; u32 regdirection; }; static int xilly_get_dma_buffers(struct xilly_endpoint *ep, struct xilly_alloc_state *s, struct xilly_buffer **buffers, int bufnum, int bytebufsize) { int i, rc; dma_addr_t dma_addr; struct device *dev = ep->dev; struct xilly_buffer *this_buffer = NULL; /* Init to silence warning */ if (buffers) { /* Not the message buffer */ this_buffer = devm_kcalloc(dev, bufnum, sizeof(struct xilly_buffer), GFP_KERNEL); if (!this_buffer) return -ENOMEM; } for (i = 0; i < bufnum; i++) { /* * Buffers are expected in descending size order, so there * is either enough space for this buffer or none at all. */ if ((s->left_of_salami < bytebufsize) && (s->left_of_salami > 0)) { dev_err(ep->dev, "Corrupt buffer allocation in IDT. Aborting.\n"); return -ENODEV; } if (s->left_of_salami == 0) { int allocorder, allocsize; allocsize = PAGE_SIZE; allocorder = 0; while (bytebufsize > allocsize) { allocsize *= 2; allocorder++; } s->salami = (void *) devm_get_free_pages( dev, GFP_KERNEL | __GFP_DMA32 | __GFP_ZERO, allocorder); if (!s->salami) return -ENOMEM; s->left_of_salami = allocsize; } rc = ep->ephw->map_single(ep, s->salami, bytebufsize, s->direction, &dma_addr); if (rc) return rc; iowrite32((u32) (dma_addr & 0xffffffff), ep->registers + fpga_dma_bufaddr_lowaddr_reg); iowrite32(((u32) ((((u64) dma_addr) >> 32) & 0xffffffff)), ep->registers + fpga_dma_bufaddr_highaddr_reg); if (buffers) { /* Not the message buffer */ this_buffer->addr = s->salami; this_buffer->dma_addr = dma_addr; buffers[i] = this_buffer++; iowrite32(s->regdirection | s->nbuffer++, ep->registers + fpga_dma_bufno_reg); } else { ep->msgbuf_addr = s->salami; ep->msgbuf_dma_addr = dma_addr; ep->msg_buf_size = bytebufsize; iowrite32(s->regdirection, ep->registers + fpga_dma_bufno_reg); } s->left_of_salami -= bytebufsize; s->salami += bytebufsize; } return 0; } static int xilly_setupchannels(struct xilly_endpoint *ep, unsigned char *chandesc, int entries) { struct device *dev = ep->dev; int i, entry, rc; struct xilly_channel *channel; int channelnum, bufnum, bufsize, format, is_writebuf; int bytebufsize; int synchronous, allowpartial, exclusive_open, seekable; int supports_nonempty; int msg_buf_done = 0; struct xilly_alloc_state rd_alloc = { .salami = NULL, .left_of_salami = 0, .nbuffer = 1, .direction = DMA_TO_DEVICE, .regdirection = 0, }; struct xilly_alloc_state wr_alloc = { .salami = NULL, .left_of_salami = 0, .nbuffer = 1, .direction = DMA_FROM_DEVICE, .regdirection = 0x80000000, }; channel = devm_kcalloc(dev, ep->num_channels, sizeof(struct xilly_channel), GFP_KERNEL); if (!channel) return -ENOMEM; ep->channels = devm_kcalloc(dev, ep->num_channels + 1, sizeof(struct xilly_channel *), GFP_KERNEL); if (!ep->channels) return -ENOMEM; ep->channels[0] = NULL; /* Channel 0 is message buf. */ /* Initialize all channels with defaults */ for (i = 1; i <= ep->num_channels; i++) { channel->wr_buffers = NULL; channel->rd_buffers = NULL; channel->num_wr_buffers = 0; channel->num_rd_buffers = 0; channel->wr_fpga_buf_idx = -1; channel->wr_host_buf_idx = 0; channel->wr_host_buf_pos = 0; channel->wr_empty = 1; channel->wr_ready = 0; channel->wr_sleepy = 1; channel->rd_fpga_buf_idx = 0; channel->rd_host_buf_idx = 0; channel->rd_host_buf_pos = 0; channel->rd_full = 0; channel->wr_ref_count = 0; channel->rd_ref_count = 0; spin_lock_init(&channel->wr_spinlock); spin_lock_init(&channel->rd_spinlock); mutex_init(&channel->wr_mutex); mutex_init(&channel->rd_mutex); init_waitqueue_head(&channel->rd_wait); init_waitqueue_head(&channel->wr_wait); init_waitqueue_head(&channel->wr_ready_wait); INIT_DELAYED_WORK(&channel->rd_workitem, xillybus_autoflush); channel->endpoint = ep; channel->chan_num = i; channel->log2_element_size = 0; ep->channels[i] = channel++; } for (entry = 0; entry < entries; entry++, chandesc += 4) { struct xilly_buffer **buffers = NULL; is_writebuf = chandesc[0] & 0x01; channelnum = (chandesc[0] >> 1) | ((chandesc[1] & 0x0f) << 7); format = (chandesc[1] >> 4) & 0x03; allowpartial = (chandesc[1] >> 6) & 0x01; synchronous = (chandesc[1] >> 7) & 0x01; bufsize = 1 << (chandesc[2] & 0x1f); bufnum = 1 << (chandesc[3] & 0x0f); exclusive_open = (chandesc[2] >> 7) & 0x01; seekable = (chandesc[2] >> 6) & 0x01; supports_nonempty = (chandesc[2] >> 5) & 0x01; if ((channelnum > ep->num_channels) || ((channelnum == 0) && !is_writebuf)) { dev_err(ep->dev, "IDT requests channel out of range. Aborting.\n"); return -ENODEV; } channel = ep->channels[channelnum]; /* NULL for msg channel */ if (!is_writebuf || channelnum > 0) { channel->log2_element_size = ((format > 2) ? 2 : format); bytebufsize = bufsize * (1 << channel->log2_element_size); buffers = devm_kcalloc(dev, bufnum, sizeof(struct xilly_buffer *), GFP_KERNEL); if (!buffers) return -ENOMEM; } else { bytebufsize = bufsize << 2; } if (!is_writebuf) { channel->num_rd_buffers = bufnum; channel->rd_buf_size = bytebufsize; channel->rd_allow_partial = allowpartial; channel->rd_synchronous = synchronous; channel->rd_exclusive_open = exclusive_open; channel->seekable = seekable; channel->rd_buffers = buffers; rc = xilly_get_dma_buffers(ep, &rd_alloc, buffers, bufnum, bytebufsize); } else if (channelnum > 0) { channel->num_wr_buffers = bufnum; channel->wr_buf_size = bytebufsize; channel->seekable = seekable; channel->wr_supports_nonempty = supports_nonempty; channel->wr_allow_partial = allowpartial; channel->wr_synchronous = synchronous; channel->wr_exclusive_open = exclusive_open; channel->wr_buffers = buffers; rc = xilly_get_dma_buffers(ep, &wr_alloc, buffers, bufnum, bytebufsize); } else { rc = xilly_get_dma_buffers(ep, &wr_alloc, NULL, bufnum, bytebufsize); msg_buf_done++; } if (rc) return -ENOMEM; } if (!msg_buf_done) { dev_err(ep->dev, "Corrupt IDT: No message buffer. Aborting.\n"); return -ENODEV; } return 0; } static int xilly_scan_idt(struct xilly_endpoint *endpoint, struct xilly_idt_handle *idt_handle) { int count = 0; unsigned char *idt = endpoint->channels[1]->wr_buffers[0]->addr; unsigned char *end_of_idt = idt + endpoint->idtlen - 4; unsigned char *scan; int len; scan = idt; idt_handle->idt = idt; scan++; /* Skip version number */ while ((scan <= end_of_idt) && *scan) { while ((scan <= end_of_idt) && *scan++) /* Do nothing, just scan thru string */; count++; } scan++; if (scan > end_of_idt) { dev_err(endpoint->dev, "IDT device name list overflow. Aborting.\n"); return -ENODEV; } idt_handle->chandesc = scan; len = endpoint->idtlen - (3 + ((int) (scan - idt))); if (len & 0x03) { dev_err(endpoint->dev, "Corrupt IDT device name list. Aborting.\n"); return -ENODEV; } idt_handle->entries = len >> 2; endpoint->num_channels = count; return 0; } static int xilly_obtain_idt(struct xilly_endpoint *endpoint) { struct xilly_channel *channel; unsigned char *version; long t; channel = endpoint->channels[1]; /* This should be generated ad-hoc */ channel->wr_sleepy = 1; iowrite32(1 | (3 << 24), /* Opcode 3 for channel 0 = Send IDT */ endpoint->registers + fpga_buf_ctrl_reg); t = wait_event_interruptible_timeout(channel->wr_wait, (!channel->wr_sleepy), XILLY_TIMEOUT); if (t <= 0) { dev_err(endpoint->dev, "Failed to obtain IDT. Aborting.\n"); if (endpoint->fatal_error) return -EIO; return -ENODEV; } endpoint->ephw->hw_sync_sgl_for_cpu( channel->endpoint, channel->wr_buffers[0]->dma_addr, channel->wr_buf_size, DMA_FROM_DEVICE); if (channel->wr_buffers[0]->end_offset != endpoint->idtlen) { dev_err(endpoint->dev, "IDT length mismatch (%d != %d). Aborting.\n", channel->wr_buffers[0]->end_offset, endpoint->idtlen); return -ENODEV; } if (crc32_le(~0, channel->wr_buffers[0]->addr, endpoint->idtlen+1) != 0) { dev_err(endpoint->dev, "IDT failed CRC check. Aborting.\n"); return -ENODEV; } version = channel->wr_buffers[0]->addr; /* Check version number. Reject anything above 0x82. */ if (*version > 0x82) { dev_err(endpoint->dev, "No support for IDT version 0x%02x. Maybe the xillybus driver needs an upgrade. Aborting.\n", *version); return -ENODEV; } return 0; } static ssize_t xillybus_read(struct file *filp, char __user *userbuf, size_t count, loff_t *f_pos) { ssize_t rc; unsigned long flags; int bytes_done = 0; int no_time_left = 0; long deadline, left_to_sleep; struct xilly_channel *channel = filp->private_data; int empty, reached_eof, exhausted, ready; /* Initializations are there only to silence warnings */ int howmany = 0, bufpos = 0, bufidx = 0, bufferdone = 0; int waiting_bufidx; if (channel->endpoint->fatal_error) return -EIO; deadline = jiffies + 1 + XILLY_RX_TIMEOUT; rc = mutex_lock_interruptible(&channel->wr_mutex); if (rc) return rc; while (1) { /* Note that we may drop mutex within this loop */ int bytes_to_do = count - bytes_done; spin_lock_irqsave(&channel->wr_spinlock, flags); empty = channel->wr_empty; ready = !empty || channel->wr_ready; if (!empty) { bufidx = channel->wr_host_buf_idx; bufpos = channel->wr_host_buf_pos; howmany = ((channel->wr_buffers[bufidx]->end_offset + 1) << channel->log2_element_size) - bufpos; /* Update wr_host_* to its post-operation state */ if (howmany > bytes_to_do) { bufferdone = 0; howmany = bytes_to_do; channel->wr_host_buf_pos += howmany; } else { bufferdone = 1; channel->wr_host_buf_pos = 0; if (bufidx == channel->wr_fpga_buf_idx) { channel->wr_empty = 1; channel->wr_sleepy = 1; channel->wr_ready = 0; } if (bufidx >= (channel->num_wr_buffers - 1)) channel->wr_host_buf_idx = 0; else channel->wr_host_buf_idx++; } } /* * Marking our situation after the possible changes above, * for use after releasing the spinlock. * * empty = empty before change * exhasted = empty after possible change */ reached_eof = channel->wr_empty && (channel->wr_host_buf_idx == channel->wr_eof); channel->wr_hangup = reached_eof; exhausted = channel->wr_empty; waiting_bufidx = channel->wr_host_buf_idx; spin_unlock_irqrestore(&channel->wr_spinlock, flags); if (!empty) { /* Go on, now without the spinlock */ if (bufpos == 0) /* Position zero means it's virgin */ channel->endpoint->ephw->hw_sync_sgl_for_cpu( channel->endpoint, channel->wr_buffers[bufidx]->dma_addr, channel->wr_buf_size, DMA_FROM_DEVICE); if (copy_to_user( userbuf, channel->wr_buffers[bufidx]->addr + bufpos, howmany)) rc = -EFAULT; userbuf += howmany; bytes_done += howmany; if (bufferdone) { channel->endpoint->ephw->hw_sync_sgl_for_device( channel->endpoint, channel->wr_buffers[bufidx]->dma_addr, channel->wr_buf_size, DMA_FROM_DEVICE); /* * Tell FPGA the buffer is done with. It's an * atomic operation to the FPGA, so what * happens with other channels doesn't matter, * and the certain channel is protected with * the channel-specific mutex. */ iowrite32(1 | (channel->chan_num << 1) | (bufidx << 12), channel->endpoint->registers + fpga_buf_ctrl_reg); } if (rc) { mutex_unlock(&channel->wr_mutex); return rc; } } /* This includes a zero-count return = EOF */ if ((bytes_done >= count) || reached_eof) break; if (!exhausted) continue; /* More in RAM buffer(s)? Just go on. */ if ((bytes_done > 0) && (no_time_left || (channel->wr_synchronous && channel->wr_allow_partial))) break; /* * Nonblocking read: The "ready" flag tells us that the FPGA * has data to send. In non-blocking mode, if it isn't on, * just return. But if there is, we jump directly to the point * where we ask for the FPGA to send all it has, and wait * until that data arrives. So in a sense, we *do* block in * nonblocking mode, but only for a very short time. */ if (!no_time_left && (filp->f_flags & O_NONBLOCK)) { if (bytes_done > 0) break; if (ready) goto desperate; rc = -EAGAIN; break; } if (!no_time_left || (bytes_done > 0)) { /* * Note that in case of an element-misaligned read * request, offsetlimit will include the last element, * which will be partially read from. */ int offsetlimit = ((count - bytes_done) - 1) >> channel->log2_element_size; int buf_elements = channel->wr_buf_size >> channel->log2_element_size; /* * In synchronous mode, always send an offset limit. * Just don't send a value too big. */ if (channel->wr_synchronous) { /* Don't request more than one buffer */ if (channel->wr_allow_partial && (offsetlimit >= buf_elements)) offsetlimit = buf_elements - 1; /* Don't request more than all buffers */ if (!channel->wr_allow_partial && (offsetlimit >= (buf_elements * channel->num_wr_buffers))) offsetlimit = buf_elements * channel->num_wr_buffers - 1; } /* * In asynchronous mode, force early flush of a buffer * only if that will allow returning a full count. The * "offsetlimit < ( ... )" rather than "<=" excludes * requesting a full buffer, which would obviously * cause a buffer transmission anyhow */ if (channel->wr_synchronous || (offsetlimit < (buf_elements - 1))) { mutex_lock(&channel->endpoint->register_mutex); iowrite32(offsetlimit, channel->endpoint->registers + fpga_buf_offset_reg); iowrite32(1 | (channel->chan_num << 1) | (2 << 24) | /* 2 = offset limit */ (waiting_bufidx << 12), channel->endpoint->registers + fpga_buf_ctrl_reg); mutex_unlock(&channel->endpoint-> register_mutex); } } /* * If partial completion is disallowed, there is no point in * timeout sleeping. Neither if no_time_left is set and * there's no data. */ if (!channel->wr_allow_partial || (no_time_left && (bytes_done == 0))) { /* * This do-loop will run more than once if another * thread reasserted wr_sleepy before we got the mutex * back, so we try again. */ do { mutex_unlock(&channel->wr_mutex); if (wait_event_interruptible( channel->wr_wait, (!channel->wr_sleepy))) goto interrupted; if (mutex_lock_interruptible( &channel->wr_mutex)) goto interrupted; } while (channel->wr_sleepy); continue; interrupted: /* Mutex is not held if got here */ if (channel->endpoint->fatal_error) return -EIO; if (bytes_done) return bytes_done; if (filp->f_flags & O_NONBLOCK) return -EAGAIN; /* Don't admit snoozing */ return -EINTR; } left_to_sleep = deadline - ((long) jiffies); /* * If our time is out, skip the waiting. We may miss wr_sleepy * being deasserted but hey, almost missing the train is like * missing it. */ if (left_to_sleep > 0) { left_to_sleep = wait_event_interruptible_timeout( channel->wr_wait, (!channel->wr_sleepy), left_to_sleep); if (left_to_sleep > 0) /* wr_sleepy deasserted */ continue; if (left_to_sleep < 0) { /* Interrupt */ mutex_unlock(&channel->wr_mutex); if (channel->endpoint->fatal_error) return -EIO; if (bytes_done) return bytes_done; return -EINTR; } } desperate: no_time_left = 1; /* We're out of sleeping time. Desperate! */ if (bytes_done == 0) { /* * Reaching here means that we allow partial return, * that we've run out of time, and that we have * nothing to return. * So tell the FPGA to send anything it has or gets. */ iowrite32(1 | (channel->chan_num << 1) | (3 << 24) | /* Opcode 3, flush it all! */ (waiting_bufidx << 12), channel->endpoint->registers + fpga_buf_ctrl_reg); } /* * Reaching here means that we *do* have data in the buffer, * but the "partial" flag disallows returning less than * required. And we don't have as much. So loop again, * which is likely to end up blocking indefinitely until * enough data has arrived. */ } mutex_unlock(&channel->wr_mutex); if (channel->endpoint->fatal_error) return -EIO; if (rc) return rc; return bytes_done; } /* * The timeout argument takes values as follows: * >0 : Flush with timeout * ==0 : Flush, and wait idefinitely for the flush to complete * <0 : Autoflush: Flush only if there's a single buffer occupied */ static int xillybus_myflush(struct xilly_channel *channel, long timeout) { int rc; unsigned long flags; int end_offset_plus1; int bufidx, bufidx_minus1; int i; int empty; int new_rd_host_buf_pos; if (channel->endpoint->fatal_error) return -EIO; rc = mutex_lock_interruptible(&channel->rd_mutex); if (rc) return rc; /* * Don't flush a closed channel. This can happen when the work queued * autoflush thread fires off after the file has closed. This is not * an error, just something to dismiss. */ if (!channel->rd_ref_count) goto done; bufidx = channel->rd_host_buf_idx; bufidx_minus1 = (bufidx == 0) ? channel->num_rd_buffers - 1 : bufidx - 1; end_offset_plus1 = channel->rd_host_buf_pos >> channel->log2_element_size; new_rd_host_buf_pos = channel->rd_host_buf_pos - (end_offset_plus1 << channel->log2_element_size); /* Submit the current buffer if it's nonempty */ if (end_offset_plus1) { unsigned char *tail = channel->rd_buffers[bufidx]->addr + (end_offset_plus1 << channel->log2_element_size); /* Copy unflushed data, so we can put it in next buffer */ for (i = 0; i < new_rd_host_buf_pos; i++) channel->rd_leftovers[i] = *tail++; spin_lock_irqsave(&channel->rd_spinlock, flags); /* Autoflush only if a single buffer is occupied */ if ((timeout < 0) && (channel->rd_full || (bufidx_minus1 != channel->rd_fpga_buf_idx))) { spin_unlock_irqrestore(&channel->rd_spinlock, flags); /* * A new work item may be queued by the ISR exactly * now, since the execution of a work item allows the * queuing of a new one while it's running. */ goto done; } /* The 4th element is never needed for data, so it's a flag */ channel->rd_leftovers[3] = (new_rd_host_buf_pos != 0); /* Set up rd_full to reflect a certain moment's state */ if (bufidx == channel->rd_fpga_buf_idx) channel->rd_full = 1; spin_unlock_irqrestore(&channel->rd_spinlock, flags); if (bufidx >= (channel->num_rd_buffers - 1)) channel->rd_host_buf_idx = 0; else channel->rd_host_buf_idx++; channel->endpoint->ephw->hw_sync_sgl_for_device( channel->endpoint, channel->rd_buffers[bufidx]->dma_addr, channel->rd_buf_size, DMA_TO_DEVICE); mutex_lock(&channel->endpoint->register_mutex); iowrite32(end_offset_plus1 - 1, channel->endpoint->registers + fpga_buf_offset_reg); iowrite32((channel->chan_num << 1) | /* Channel ID */ (2 << 24) | /* Opcode 2, submit buffer */ (bufidx << 12), channel->endpoint->registers + fpga_buf_ctrl_reg); mutex_unlock(&channel->endpoint->register_mutex); } else if (bufidx == 0) { bufidx = channel->num_rd_buffers - 1; } else { bufidx--; } channel->rd_host_buf_pos = new_rd_host_buf_pos; if (timeout < 0) goto done; /* Autoflush */ /* * bufidx is now the last buffer written to (or equal to * rd_fpga_buf_idx if buffer was never written to), and * channel->rd_host_buf_idx the one after it. * * If bufidx == channel->rd_fpga_buf_idx we're either empty or full. */ while (1) { /* Loop waiting for draining of buffers */ spin_lock_irqsave(&channel->rd_spinlock, flags); if (bufidx != channel->rd_fpga_buf_idx) channel->rd_full = 1; /* * Not really full, * but needs waiting. */ empty = !channel->rd_full; spin_unlock_irqrestore(&channel->rd_spinlock, flags); if (empty) break; /* * Indefinite sleep with mutex taken. With data waiting for * flushing user should not be surprised if open() for write * sleeps. */ if (timeout == 0) wait_event_interruptible(channel->rd_wait, (!channel->rd_full)); else if (wait_event_interruptible_timeout( channel->rd_wait, (!channel->rd_full), timeout) == 0) { dev_warn(channel->endpoint->dev, "Timed out while flushing. Output data may be lost.\n"); rc = -ETIMEDOUT; break; } if (channel->rd_full) { rc = -EINTR; break; } } done: mutex_unlock(&channel->rd_mutex); if (channel->endpoint->fatal_error) return -EIO; return rc; } static int xillybus_flush(struct file *filp, fl_owner_t id) { if (!(filp->f_mode & FMODE_WRITE)) return 0; return xillybus_myflush(filp->private_data, HZ); /* 1 second timeout */ } static void xillybus_autoflush(struct work_struct *work) { struct delayed_work *workitem = container_of( work, struct delayed_work, work); struct xilly_channel *channel = container_of( workitem, struct xilly_channel, rd_workitem); int rc; rc = xillybus_myflush(channel, -1); if (rc == -EINTR) dev_warn(channel->endpoint->dev, "Autoflush failed because work queue thread got a signal.\n"); else if (rc) dev_err(channel->endpoint->dev, "Autoflush failed under weird circumstances.\n"); } static ssize_t xillybus_write(struct file *filp, const char __user *userbuf, size_t count, loff_t *f_pos) { ssize_t rc; unsigned long flags; int bytes_done = 0; struct xilly_channel *channel = filp->private_data; int full, exhausted; /* Initializations are there only to silence warnings */ int howmany = 0, bufpos = 0, bufidx = 0, bufferdone = 0; int end_offset_plus1 = 0; if (channel->endpoint->fatal_error) return -EIO; rc = mutex_lock_interruptible(&channel->rd_mutex); if (rc) return rc; while (1) { int bytes_to_do = count - bytes_done; spin_lock_irqsave(&channel->rd_spinlock, flags); full = channel->rd_full; if (!full) { bufidx = channel->rd_host_buf_idx; bufpos = channel->rd_host_buf_pos; howmany = channel->rd_buf_size - bufpos; /* * Update rd_host_* to its state after this operation. * count=0 means committing the buffer immediately, * which is like flushing, but not necessarily block. */ if ((howmany > bytes_to_do) && (count || ((bufpos >> channel->log2_element_size) == 0))) { bufferdone = 0; howmany = bytes_to_do; channel->rd_host_buf_pos += howmany; } else { bufferdone = 1; if (count) { end_offset_plus1 = channel->rd_buf_size >> channel->log2_element_size; channel->rd_host_buf_pos = 0; } else { unsigned char *tail; int i; howmany = 0; end_offset_plus1 = bufpos >> channel->log2_element_size; channel->rd_host_buf_pos -= end_offset_plus1 << channel->log2_element_size; tail = channel-> rd_buffers[bufidx]->addr + (end_offset_plus1 << channel->log2_element_size); for (i = 0; i < channel->rd_host_buf_pos; i++) channel->rd_leftovers[i] = *tail++; } if (bufidx == channel->rd_fpga_buf_idx) channel->rd_full = 1; if (bufidx >= (channel->num_rd_buffers - 1)) channel->rd_host_buf_idx = 0; else channel->rd_host_buf_idx++; } } /* * Marking our situation after the possible changes above, * for use after releasing the spinlock. * * full = full before change * exhasted = full after possible change */ exhausted = channel->rd_full; spin_unlock_irqrestore(&channel->rd_spinlock, flags); if (!full) { /* Go on, now without the spinlock */ unsigned char *head = channel->rd_buffers[bufidx]->addr; int i; if ((bufpos == 0) || /* Zero means it's virgin */ (channel->rd_leftovers[3] != 0)) { channel->endpoint->ephw->hw_sync_sgl_for_cpu( channel->endpoint, channel->rd_buffers[bufidx]->dma_addr, channel->rd_buf_size, DMA_TO_DEVICE); /* Virgin, but leftovers are due */ for (i = 0; i < bufpos; i++) *head++ = channel->rd_leftovers[i]; channel->rd_leftovers[3] = 0; /* Clear flag */ } if (copy_from_user( channel->rd_buffers[bufidx]->addr + bufpos, userbuf, howmany)) rc = -EFAULT; userbuf += howmany; bytes_done += howmany; if (bufferdone) { channel->endpoint->ephw->hw_sync_sgl_for_device( channel->endpoint, channel->rd_buffers[bufidx]->dma_addr, channel->rd_buf_size, DMA_TO_DEVICE); mutex_lock(&channel->endpoint->register_mutex); iowrite32(end_offset_plus1 - 1, channel->endpoint->registers + fpga_buf_offset_reg); iowrite32((channel->chan_num << 1) | (2 << 24) | /* 2 = submit buffer */ (bufidx << 12), channel->endpoint->registers + fpga_buf_ctrl_reg); mutex_unlock(&channel->endpoint-> register_mutex); channel->rd_leftovers[3] = (channel->rd_host_buf_pos != 0); } if (rc) { mutex_unlock(&channel->rd_mutex); if (channel->endpoint->fatal_error) return -EIO; if (!channel->rd_synchronous) queue_delayed_work( xillybus_wq, &channel->rd_workitem, XILLY_RX_TIMEOUT); return rc; } } if (bytes_done >= count) break; if (!exhausted) continue; /* If there's more space, just go on */ if ((bytes_done > 0) && channel->rd_allow_partial) break; /* * Indefinite sleep with mutex taken. With data waiting for * flushing, user should not be surprised if open() for write * sleeps. */ if (filp->f_flags & O_NONBLOCK) { rc = -EAGAIN; break; } if (wait_event_interruptible(channel->rd_wait, (!channel->rd_full))) { mutex_unlock(&channel->rd_mutex); if (channel->endpoint->fatal_error) return -EIO; if (bytes_done) return bytes_done; return -EINTR; } } mutex_unlock(&channel->rd_mutex); if (!channel->rd_synchronous) queue_delayed_work(xillybus_wq, &channel->rd_workitem, XILLY_RX_TIMEOUT); if (channel->endpoint->fatal_error) return -EIO; if (rc) return rc; if ((channel->rd_synchronous) && (bytes_done > 0)) { rc = xillybus_myflush(filp->private_data, 0); /* No timeout */ if (rc && (rc != -EINTR)) return rc; } return bytes_done; } static int xillybus_open(struct inode *inode, struct file *filp) { int rc = 0; unsigned long flags; int minor = iminor(inode); int major = imajor(inode); struct xilly_endpoint *ep_iter, *endpoint = NULL; struct xilly_channel *channel; mutex_lock(&ep_list_lock); list_for_each_entry(ep_iter, &list_of_endpoints, ep_list) { if ((ep_iter->major == major) && (minor >= ep_iter->lowest_minor) && (minor < (ep_iter->lowest_minor + ep_iter->num_channels))) { endpoint = ep_iter; break; } } mutex_unlock(&ep_list_lock); if (!endpoint) { pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n", major, minor); return -ENODEV; } if (endpoint->fatal_error) return -EIO; channel = endpoint->channels[1 + minor - endpoint->lowest_minor]; filp->private_data = channel; /* * It gets complicated because: * 1. We don't want to take a mutex we don't have to * 2. We don't want to open one direction if the other will fail. */ if ((filp->f_mode & FMODE_READ) && (!channel->num_wr_buffers)) return -ENODEV; if ((filp->f_mode & FMODE_WRITE) && (!channel->num_rd_buffers)) return -ENODEV; if ((filp->f_mode & FMODE_READ) && (filp->f_flags & O_NONBLOCK) && (channel->wr_synchronous || !channel->wr_allow_partial || !channel->wr_supports_nonempty)) { dev_err(endpoint->dev, "open() failed: O_NONBLOCK not allowed for read on this device\n"); return -ENODEV; } if ((filp->f_mode & FMODE_WRITE) && (filp->f_flags & O_NONBLOCK) && (channel->rd_synchronous || !channel->rd_allow_partial)) { dev_err(endpoint->dev, "open() failed: O_NONBLOCK not allowed for write on this device\n"); return -ENODEV; } /* * Note: open() may block on getting mutexes despite O_NONBLOCK. * This shouldn't occur normally, since multiple open of the same * file descriptor is almost always prohibited anyhow * (*_exclusive_open is normally set in real-life systems). */ if (filp->f_mode & FMODE_READ) { rc = mutex_lock_interruptible(&channel->wr_mutex); if (rc) return rc; } if (filp->f_mode & FMODE_WRITE) { rc = mutex_lock_interruptible(&channel->rd_mutex); if (rc) goto unlock_wr; } if ((filp->f_mode & FMODE_READ) && (channel->wr_ref_count != 0) && (channel->wr_exclusive_open)) { rc = -EBUSY; goto unlock; } if ((filp->f_mode & FMODE_WRITE) && (channel->rd_ref_count != 0) && (channel->rd_exclusive_open)) { rc = -EBUSY; goto unlock; } if (filp->f_mode & FMODE_READ) { if (channel->wr_ref_count == 0) { /* First open of file */ /* Move the host to first buffer */ spin_lock_irqsave(&channel->wr_spinlock, flags); channel->wr_host_buf_idx = 0; channel->wr_host_buf_pos = 0; channel->wr_fpga_buf_idx = -1; channel->wr_empty = 1; channel->wr_ready = 0; channel->wr_sleepy = 1; channel->wr_eof = -1; channel->wr_hangup = 0; spin_unlock_irqrestore(&channel->wr_spinlock, flags); iowrite32(1 | (channel->chan_num << 1) | (4 << 24) | /* Opcode 4, open channel */ ((channel->wr_synchronous & 1) << 23), channel->endpoint->registers + fpga_buf_ctrl_reg); } channel->wr_ref_count++; } if (filp->f_mode & FMODE_WRITE) { if (channel->rd_ref_count == 0) { /* First open of file */ /* Move the host to first buffer */ spin_lock_irqsave(&channel->rd_spinlock, flags); channel->rd_host_buf_idx = 0; channel->rd_host_buf_pos = 0; channel->rd_leftovers[3] = 0; /* No leftovers. */ channel->rd_fpga_buf_idx = channel->num_rd_buffers - 1; channel->rd_full = 0; spin_unlock_irqrestore(&channel->rd_spinlock, flags); iowrite32((channel->chan_num << 1) | (4 << 24), /* Opcode 4, open channel */ channel->endpoint->registers + fpga_buf_ctrl_reg); } channel->rd_ref_count++; } unlock: if (filp->f_mode & FMODE_WRITE) mutex_unlock(&channel->rd_mutex); unlock_wr: if (filp->f_mode & FMODE_READ) mutex_unlock(&channel->wr_mutex); if (!rc && (!channel->seekable)) return nonseekable_open(inode, filp); return rc; } static int xillybus_release(struct inode *inode, struct file *filp) { unsigned long flags; struct xilly_channel *channel = filp->private_data; int buf_idx; int eof; if (channel->endpoint->fatal_error) return -EIO; if (filp->f_mode & FMODE_WRITE) { mutex_lock(&channel->rd_mutex); channel->rd_ref_count--; if (channel->rd_ref_count == 0) { /* * We rely on the kernel calling flush() * before we get here. */ iowrite32((channel->chan_num << 1) | /* Channel ID */ (5 << 24), /* Opcode 5, close channel */ channel->endpoint->registers + fpga_buf_ctrl_reg); } mutex_unlock(&channel->rd_mutex); } if (filp->f_mode & FMODE_READ) { mutex_lock(&channel->wr_mutex); channel->wr_ref_count--; if (channel->wr_ref_count == 0) { iowrite32(1 | (channel->chan_num << 1) | (5 << 24), /* Opcode 5, close channel */ channel->endpoint->registers + fpga_buf_ctrl_reg); /* * This is crazily cautious: We make sure that not * only that we got an EOF (be it because we closed * the channel or because of a user's EOF), but verify * that it's one beyond the last buffer arrived, so * we have no leftover buffers pending before wrapping * up (which can only happen in asynchronous channels, * BTW) */ while (1) { spin_lock_irqsave(&channel->wr_spinlock, flags); buf_idx = channel->wr_fpga_buf_idx; eof = channel->wr_eof; channel->wr_sleepy = 1; spin_unlock_irqrestore(&channel->wr_spinlock, flags); /* * Check if eof points at the buffer after * the last one the FPGA submitted. Note that * no EOF is marked by negative eof. */ buf_idx++; if (buf_idx == channel->num_wr_buffers) buf_idx = 0; if (buf_idx == eof) break; /* * Steal extra 100 ms if awaken by interrupt. * This is a simple workaround for an * interrupt pending when entering, which would * otherwise result in declaring the hardware * non-responsive. */ if (wait_event_interruptible( channel->wr_wait, (!channel->wr_sleepy))) msleep(100); if (channel->wr_sleepy) { mutex_unlock(&channel->wr_mutex); dev_warn(channel->endpoint->dev, "Hardware failed to respond to close command, therefore left in messy state.\n"); return -EINTR; } } } mutex_unlock(&channel->wr_mutex); } return 0; } static loff_t xillybus_llseek(struct file *filp, loff_t offset, int whence) { struct xilly_channel *channel = filp->private_data; loff_t pos = filp->f_pos; int rc = 0; /* * Take both mutexes not allowing interrupts, since it seems like * common applications don't expect an -EINTR here. Besides, multiple * access to a single file descriptor on seekable devices is a mess * anyhow. */ if (channel->endpoint->fatal_error) return -EIO; mutex_lock(&channel->wr_mutex); mutex_lock(&channel->rd_mutex); switch (whence) { case SEEK_SET: pos = offset; break; case SEEK_CUR: pos += offset; break; case SEEK_END: pos = offset; /* Going to the end => to the beginning */ break; default: rc = -EINVAL; goto end; } /* In any case, we must finish on an element boundary */ if (pos & ((1 << channel->log2_element_size) - 1)) { rc = -EINVAL; goto end; } mutex_lock(&channel->endpoint->register_mutex); iowrite32(pos >> channel->log2_element_size, channel->endpoint->registers + fpga_buf_offset_reg); iowrite32((channel->chan_num << 1) | (6 << 24), /* Opcode 6, set address */ channel->endpoint->registers + fpga_buf_ctrl_reg); mutex_unlock(&channel->endpoint->register_mutex); end: mutex_unlock(&channel->rd_mutex); mutex_unlock(&channel->wr_mutex); if (rc) /* Return error after releasing mutexes */ return rc; filp->f_pos = pos; /* * Since seekable devices are allowed only when the channel is * synchronous, we assume that there is no data pending in either * direction (which holds true as long as no concurrent access on the * file descriptor takes place). * The only thing we may need to throw away is leftovers from partial * write() flush. */ channel->rd_leftovers[3] = 0; return pos; } static __poll_t xillybus_poll(struct file *filp, poll_table *wait) { struct xilly_channel *channel = filp->private_data; __poll_t mask = 0; unsigned long flags; poll_wait(filp, &channel->endpoint->ep_wait, wait); /* * poll() won't play ball regarding read() channels which * aren't asynchronous and support the nonempty message. Allowing * that will create situations where data has been delivered at * the FPGA, and users expecting select() to wake up, which it may * not. */ if (!channel->wr_synchronous && channel->wr_supports_nonempty) { poll_wait(filp, &channel->wr_wait, wait); poll_wait(filp, &channel->wr_ready_wait, wait); spin_lock_irqsave(&channel->wr_spinlock, flags); if (!channel->wr_empty || channel->wr_ready) mask |= EPOLLIN | EPOLLRDNORM; if (channel->wr_hangup) /* * Not EPOLLHUP, because its behavior is in the * mist, and EPOLLIN does what we want: Wake up * the read file descriptor so it sees EOF. */ mask |= EPOLLIN | EPOLLRDNORM; spin_unlock_irqrestore(&channel->wr_spinlock, flags); } /* * If partial data write is disallowed on a write() channel, * it's pointless to ever signal OK to write, because is could * block despite some space being available. */ if (channel->rd_allow_partial) { poll_wait(filp, &channel->rd_wait, wait); spin_lock_irqsave(&channel->rd_spinlock, flags); if (!channel->rd_full) mask |= EPOLLOUT | EPOLLWRNORM; spin_unlock_irqrestore(&channel->rd_spinlock, flags); } if (channel->endpoint->fatal_error) mask |= EPOLLERR; return mask; } static const struct file_operations xillybus_fops = { .owner = THIS_MODULE, .read = xillybus_read, .write = xillybus_write, .open = xillybus_open, .flush = xillybus_flush, .release = xillybus_release, .llseek = xillybus_llseek, .poll = xillybus_poll, }; static int xillybus_init_chrdev(struct xilly_endpoint *endpoint, const unsigned char *idt) { int rc; dev_t dev; int devnum, i, minor, major; char devname[48]; struct device *device; rc = alloc_chrdev_region(&dev, 0, /* minor start */ endpoint->num_channels, xillyname); if (rc) { dev_warn(endpoint->dev, "Failed to obtain major/minors"); return rc; } endpoint->major = major = MAJOR(dev); endpoint->lowest_minor = minor = MINOR(dev); cdev_init(&endpoint->cdev, &xillybus_fops); endpoint->cdev.owner = endpoint->ephw->owner; rc = cdev_add(&endpoint->cdev, MKDEV(major, minor), endpoint->num_channels); if (rc) { dev_warn(endpoint->dev, "Failed to add cdev. Aborting.\n"); goto unregister_chrdev; } idt++; for (i = minor, devnum = 0; devnum < endpoint->num_channels; devnum++, i++) { snprintf(devname, sizeof(devname)-1, "xillybus_%s", idt); devname[sizeof(devname)-1] = 0; /* Should never matter */ while (*idt++) /* Skip to next */; device = device_create(xillybus_class, NULL, MKDEV(major, i), NULL, "%s", devname); if (IS_ERR(device)) { dev_warn(endpoint->dev, "Failed to create %s device. Aborting.\n", devname); rc = -ENODEV; goto unroll_device_create; } } dev_info(endpoint->dev, "Created %d device files.\n", endpoint->num_channels); return 0; /* succeed */ unroll_device_create: devnum--; i--; for (; devnum >= 0; devnum--, i--) device_destroy(xillybus_class, MKDEV(major, i)); cdev_del(&endpoint->cdev); unregister_chrdev: unregister_chrdev_region(MKDEV(major, minor), endpoint->num_channels); return rc; } static void xillybus_cleanup_chrdev(struct xilly_endpoint *endpoint) { int minor; for (minor = endpoint->lowest_minor; minor < (endpoint->lowest_minor + endpoint->num_channels); minor++) device_destroy(xillybus_class, MKDEV(endpoint->major, minor)); cdev_del(&endpoint->cdev); unregister_chrdev_region(MKDEV(endpoint->major, endpoint->lowest_minor), endpoint->num_channels); dev_info(endpoint->dev, "Removed %d device files.\n", endpoint->num_channels); } struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev, struct device *dev, struct xilly_endpoint_hardware *ephw) { struct xilly_endpoint *endpoint; endpoint = devm_kzalloc(dev, sizeof(*endpoint), GFP_KERNEL); if (!endpoint) return NULL; endpoint->pdev = pdev; endpoint->dev = dev; endpoint->ephw = ephw; endpoint->msg_counter = 0x0b; endpoint->failed_messages = 0; endpoint->fatal_error = 0; init_waitqueue_head(&endpoint->ep_wait); mutex_init(&endpoint->register_mutex); return endpoint; } EXPORT_SYMBOL(xillybus_init_endpoint); static int xilly_quiesce(struct xilly_endpoint *endpoint) { long t; endpoint->idtlen = -1; iowrite32((u32) (endpoint->dma_using_dac & 0x0001), endpoint->registers + fpga_dma_control_reg); t = wait_event_interruptible_timeout(endpoint->ep_wait, (endpoint->idtlen >= 0), XILLY_TIMEOUT); if (t <= 0) { dev_err(endpoint->dev, "Failed to quiesce the device on exit.\n"); return -ENODEV; } return 0; } int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint) { int rc; long t; void *bootstrap_resources; int idtbuffersize = (1 << PAGE_SHIFT); struct device *dev = endpoint->dev; /* * The bogus IDT is used during bootstrap for allocating the initial * message buffer, and then the message buffer and space for the IDT * itself. The initial message buffer is of a single page's size, but * it's soon replaced with a more modest one (and memory is freed). */ unsigned char bogus_idt[8] = { 1, 224, (PAGE_SHIFT)-2, 0, 3, 192, PAGE_SHIFT, 0 }; struct xilly_idt_handle idt_handle; /* * Writing the value 0x00000001 to Endianness register signals which * endianness this processor is using, so the FPGA can swap words as * necessary. */ iowrite32(1, endpoint->registers + fpga_endian_reg); /* Bootstrap phase I: Allocate temporary message buffer */ bootstrap_resources = devres_open_group(dev, NULL, GFP_KERNEL); if (!bootstrap_resources) return -ENOMEM; endpoint->num_channels = 0; rc = xilly_setupchannels(endpoint, bogus_idt, 1); if (rc) return rc; /* Clear the message subsystem (and counter in particular) */ iowrite32(0x04, endpoint->registers + fpga_msg_ctrl_reg); endpoint->idtlen = -1; /* * Set DMA 32/64 bit mode, quiesce the device (?!) and get IDT * buffer size. */ iowrite32((u32) (endpoint->dma_using_dac & 0x0001), endpoint->registers + fpga_dma_control_reg); t = wait_event_interruptible_timeout(endpoint->ep_wait, (endpoint->idtlen >= 0), XILLY_TIMEOUT); if (t <= 0) { dev_err(endpoint->dev, "No response from FPGA. Aborting.\n"); return -ENODEV; } /* Enable DMA */ iowrite32((u32) (0x0002 | (endpoint->dma_using_dac & 0x0001)), endpoint->registers + fpga_dma_control_reg); /* Bootstrap phase II: Allocate buffer for IDT and obtain it */ while (endpoint->idtlen >= idtbuffersize) { idtbuffersize *= 2; bogus_idt[6]++; } endpoint->num_channels = 1; rc = xilly_setupchannels(endpoint, bogus_idt, 2); if (rc) goto failed_idt; rc = xilly_obtain_idt(endpoint); if (rc) goto failed_idt; rc = xilly_scan_idt(endpoint, &idt_handle); if (rc) goto failed_idt; devres_close_group(dev, bootstrap_resources); /* Bootstrap phase III: Allocate buffers according to IDT */ rc = xilly_setupchannels(endpoint, idt_handle.chandesc, idt_handle.entries); if (rc) goto failed_idt; /* * endpoint is now completely configured. We put it on the list * available to open() before registering the char device(s) */ mutex_lock(&ep_list_lock); list_add_tail(&endpoint->ep_list, &list_of_endpoints); mutex_unlock(&ep_list_lock); rc = xillybus_init_chrdev(endpoint, idt_handle.idt); if (rc) goto failed_chrdevs; devres_release_group(dev, bootstrap_resources); return 0; failed_chrdevs: mutex_lock(&ep_list_lock); list_del(&endpoint->ep_list); mutex_unlock(&ep_list_lock); failed_idt: xilly_quiesce(endpoint); flush_workqueue(xillybus_wq); return rc; } EXPORT_SYMBOL(xillybus_endpoint_discovery); void xillybus_endpoint_remove(struct xilly_endpoint *endpoint) { xillybus_cleanup_chrdev(endpoint); mutex_lock(&ep_list_lock); list_del(&endpoint->ep_list); mutex_unlock(&ep_list_lock); xilly_quiesce(endpoint); /* * Flushing is done upon endpoint release to prevent access to memory * just about to be released. This makes the quiesce complete. */ flush_workqueue(xillybus_wq); } EXPORT_SYMBOL(xillybus_endpoint_remove); static int __init xillybus_init(void) { mutex_init(&ep_list_lock); xillybus_class = class_create(THIS_MODULE, xillyname); if (IS_ERR(xillybus_class)) return PTR_ERR(xillybus_class); xillybus_wq = alloc_workqueue(xillyname, 0, 0); if (!xillybus_wq) { class_destroy(xillybus_class); return -ENOMEM; } return 0; } static void __exit xillybus_exit(void) { /* flush_workqueue() was called for each endpoint released */ destroy_workqueue(xillybus_wq); class_destroy(xillybus_class); } module_init(xillybus_init); module_exit(xillybus_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1