Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dan Streetman | 2368 | 95.83% | 5 | 62.50% |
Herbert Xu | 101 | 4.09% | 1 | 12.50% |
Masanari Iida | 1 | 0.04% | 1 | 12.50% |
Haren Myneni | 1 | 0.04% | 1 | 12.50% |
Total | 2471 | 8 |
/* * Cryptographic API for the NX-842 hardware compression. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Copyright (C) IBM Corporation, 2011-2015 * * Designer of the Power data compression engine: * Bulent Abali <abali@us.ibm.com> * * Original Authors: Robert Jennings <rcj@linux.vnet.ibm.com> * Seth Jennings <sjenning@linux.vnet.ibm.com> * * Rewrite: Dan Streetman <ddstreet@ieee.org> * * This is an interface to the NX-842 compression hardware in PowerPC * processors. Most of the complexity of this drvier is due to the fact that * the NX-842 compression hardware requires the input and output data buffers * to be specifically aligned, to be a specific multiple in length, and within * specific minimum and maximum lengths. Those restrictions, provided by the * nx-842 driver via nx842_constraints, mean this driver must use bounce * buffers and headers to correct misaligned in or out buffers, and to split * input buffers that are too large. * * This driver will fall back to software decompression if the hardware * decompression fails, so this driver's decompression should never fail as * long as the provided compressed buffer is valid. Any compressed buffer * created by this driver will have a header (except ones where the input * perfectly matches the constraints); so users of this driver cannot simply * pass a compressed buffer created by this driver over to the 842 software * decompression library. Instead, users must use this driver to decompress; * if the hardware fails or is unavailable, the compressed buffer will be * parsed and the header removed, and the raw 842 buffer(s) passed to the 842 * software decompression library. * * This does not fall back to software compression, however, since the caller * of this function is specifically requesting hardware compression; if the * hardware compression fails, the caller can fall back to software * compression, and the raw 842 compressed buffer that the software compressor * creates can be passed to this driver for hardware decompression; any * buffer without our specific header magic is assumed to be a raw 842 buffer * and passed directly to the hardware. Note that the software compression * library will produce a compressed buffer that is incompatible with the * hardware decompressor if the original input buffer length is not a multiple * of 8; if such a compressed buffer is passed to this driver for * decompression, the hardware will reject it and this driver will then pass * it over to the software library for decompression. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/vmalloc.h> #include <linux/sw842.h> #include <linux/spinlock.h> #include "nx-842.h" /* The first 5 bits of this magic are 0x1f, which is an invalid 842 5-bit * template (see lib/842/842.h), so this magic number will never appear at * the start of a raw 842 compressed buffer. That is important, as any buffer * passed to us without this magic is assumed to be a raw 842 compressed * buffer, and passed directly to the hardware to decompress. */ #define NX842_CRYPTO_MAGIC (0xf842) #define NX842_CRYPTO_HEADER_SIZE(g) \ (sizeof(struct nx842_crypto_header) + \ sizeof(struct nx842_crypto_header_group) * (g)) #define NX842_CRYPTO_HEADER_MAX_SIZE \ NX842_CRYPTO_HEADER_SIZE(NX842_CRYPTO_GROUP_MAX) /* bounce buffer size */ #define BOUNCE_BUFFER_ORDER (2) #define BOUNCE_BUFFER_SIZE \ ((unsigned int)(PAGE_SIZE << BOUNCE_BUFFER_ORDER)) /* try longer on comp because we can fallback to sw decomp if hw is busy */ #define COMP_BUSY_TIMEOUT (250) /* ms */ #define DECOMP_BUSY_TIMEOUT (50) /* ms */ struct nx842_crypto_param { u8 *in; unsigned int iremain; u8 *out; unsigned int oremain; unsigned int ototal; }; static int update_param(struct nx842_crypto_param *p, unsigned int slen, unsigned int dlen) { if (p->iremain < slen) return -EOVERFLOW; if (p->oremain < dlen) return -ENOSPC; p->in += slen; p->iremain -= slen; p->out += dlen; p->oremain -= dlen; p->ototal += dlen; return 0; } int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver) { struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); spin_lock_init(&ctx->lock); ctx->driver = driver; ctx->wmem = kmalloc(driver->workmem_size, GFP_KERNEL); ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER); ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER); if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) { kfree(ctx->wmem); free_page((unsigned long)ctx->sbounce); free_page((unsigned long)ctx->dbounce); return -ENOMEM; } return 0; } EXPORT_SYMBOL_GPL(nx842_crypto_init); void nx842_crypto_exit(struct crypto_tfm *tfm) { struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); kfree(ctx->wmem); free_page((unsigned long)ctx->sbounce); free_page((unsigned long)ctx->dbounce); } EXPORT_SYMBOL_GPL(nx842_crypto_exit); static void check_constraints(struct nx842_constraints *c) { /* limit maximum, to always have enough bounce buffer to decompress */ if (c->maximum > BOUNCE_BUFFER_SIZE) c->maximum = BOUNCE_BUFFER_SIZE; } static int nx842_crypto_add_header(struct nx842_crypto_header *hdr, u8 *buf) { int s = NX842_CRYPTO_HEADER_SIZE(hdr->groups); /* compress should have added space for header */ if (s > be16_to_cpu(hdr->group[0].padding)) { pr_err("Internal error: no space for header\n"); return -EINVAL; } memcpy(buf, hdr, s); print_hex_dump_debug("header ", DUMP_PREFIX_OFFSET, 16, 1, buf, s, 0); return 0; } static int compress(struct nx842_crypto_ctx *ctx, struct nx842_crypto_param *p, struct nx842_crypto_header_group *g, struct nx842_constraints *c, u16 *ignore, unsigned int hdrsize) { unsigned int slen = p->iremain, dlen = p->oremain, tmplen; unsigned int adj_slen = slen; u8 *src = p->in, *dst = p->out; int ret, dskip = 0; ktime_t timeout; if (p->iremain == 0) return -EOVERFLOW; if (p->oremain == 0 || hdrsize + c->minimum > dlen) return -ENOSPC; if (slen % c->multiple) adj_slen = round_up(slen, c->multiple); if (slen < c->minimum) adj_slen = c->minimum; if (slen > c->maximum) adj_slen = slen = c->maximum; if (adj_slen > slen || (u64)src % c->alignment) { adj_slen = min(adj_slen, BOUNCE_BUFFER_SIZE); slen = min(slen, BOUNCE_BUFFER_SIZE); if (adj_slen > slen) memset(ctx->sbounce + slen, 0, adj_slen - slen); memcpy(ctx->sbounce, src, slen); src = ctx->sbounce; slen = adj_slen; pr_debug("using comp sbounce buffer, len %x\n", slen); } dst += hdrsize; dlen -= hdrsize; if ((u64)dst % c->alignment) { dskip = (int)(PTR_ALIGN(dst, c->alignment) - dst); dst += dskip; dlen -= dskip; } if (dlen % c->multiple) dlen = round_down(dlen, c->multiple); if (dlen < c->minimum) { nospc: dst = ctx->dbounce; dlen = min(p->oremain, BOUNCE_BUFFER_SIZE); dlen = round_down(dlen, c->multiple); dskip = 0; pr_debug("using comp dbounce buffer, len %x\n", dlen); } if (dlen > c->maximum) dlen = c->maximum; tmplen = dlen; timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT); do { dlen = tmplen; /* reset dlen, if we're retrying */ ret = ctx->driver->compress(src, slen, dst, &dlen, ctx->wmem); /* possibly we should reduce the slen here, instead of * retrying with the dbounce buffer? */ if (ret == -ENOSPC && dst != ctx->dbounce) goto nospc; } while (ret == -EBUSY && ktime_before(ktime_get(), timeout)); if (ret) return ret; dskip += hdrsize; if (dst == ctx->dbounce) memcpy(p->out + dskip, dst, dlen); g->padding = cpu_to_be16(dskip); g->compressed_length = cpu_to_be32(dlen); g->uncompressed_length = cpu_to_be32(slen); if (p->iremain < slen) { *ignore = slen - p->iremain; slen = p->iremain; } pr_debug("compress slen %x ignore %x dlen %x padding %x\n", slen, *ignore, dlen, dskip); return update_param(p, slen, dskip + dlen); } int nx842_crypto_compress(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) { struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); struct nx842_crypto_header *hdr = &ctx->header; struct nx842_crypto_param p; struct nx842_constraints c = *ctx->driver->constraints; unsigned int groups, hdrsize, h; int ret, n; bool add_header; u16 ignore = 0; check_constraints(&c); p.in = (u8 *)src; p.iremain = slen; p.out = dst; p.oremain = *dlen; p.ototal = 0; *dlen = 0; groups = min_t(unsigned int, NX842_CRYPTO_GROUP_MAX, DIV_ROUND_UP(p.iremain, c.maximum)); hdrsize = NX842_CRYPTO_HEADER_SIZE(groups); spin_lock_bh(&ctx->lock); /* skip adding header if the buffers meet all constraints */ add_header = (p.iremain % c.multiple || p.iremain < c.minimum || p.iremain > c.maximum || (u64)p.in % c.alignment || p.oremain % c.multiple || p.oremain < c.minimum || p.oremain > c.maximum || (u64)p.out % c.alignment); hdr->magic = cpu_to_be16(NX842_CRYPTO_MAGIC); hdr->groups = 0; hdr->ignore = 0; while (p.iremain > 0) { n = hdr->groups++; ret = -ENOSPC; if (hdr->groups > NX842_CRYPTO_GROUP_MAX) goto unlock; /* header goes before first group */ h = !n && add_header ? hdrsize : 0; if (ignore) pr_warn("internal error, ignore is set %x\n", ignore); ret = compress(ctx, &p, &hdr->group[n], &c, &ignore, h); if (ret) goto unlock; } if (!add_header && hdr->groups > 1) { pr_err("Internal error: No header but multiple groups\n"); ret = -EINVAL; goto unlock; } /* ignore indicates the input stream needed to be padded */ hdr->ignore = cpu_to_be16(ignore); if (ignore) pr_debug("marked %d bytes as ignore\n", ignore); if (add_header) ret = nx842_crypto_add_header(hdr, dst); if (ret) goto unlock; *dlen = p.ototal; pr_debug("compress total slen %x dlen %x\n", slen, *dlen); unlock: spin_unlock_bh(&ctx->lock); return ret; } EXPORT_SYMBOL_GPL(nx842_crypto_compress); static int decompress(struct nx842_crypto_ctx *ctx, struct nx842_crypto_param *p, struct nx842_crypto_header_group *g, struct nx842_constraints *c, u16 ignore) { unsigned int slen = be32_to_cpu(g->compressed_length); unsigned int required_len = be32_to_cpu(g->uncompressed_length); unsigned int dlen = p->oremain, tmplen; unsigned int adj_slen = slen; u8 *src = p->in, *dst = p->out; u16 padding = be16_to_cpu(g->padding); int ret, spadding = 0, dpadding = 0; ktime_t timeout; if (!slen || !required_len) return -EINVAL; if (p->iremain <= 0 || padding + slen > p->iremain) return -EOVERFLOW; if (p->oremain <= 0 || required_len - ignore > p->oremain) return -ENOSPC; src += padding; if (slen % c->multiple) adj_slen = round_up(slen, c->multiple); if (slen < c->minimum) adj_slen = c->minimum; if (slen > c->maximum) goto usesw; if (slen < adj_slen || (u64)src % c->alignment) { /* we can append padding bytes because the 842 format defines * an "end" template (see lib/842/842_decompress.c) and will * ignore any bytes following it. */ if (slen < adj_slen) memset(ctx->sbounce + slen, 0, adj_slen - slen); memcpy(ctx->sbounce, src, slen); src = ctx->sbounce; spadding = adj_slen - slen; slen = adj_slen; pr_debug("using decomp sbounce buffer, len %x\n", slen); } if (dlen % c->multiple) dlen = round_down(dlen, c->multiple); if (dlen < required_len || (u64)dst % c->alignment) { dst = ctx->dbounce; dlen = min(required_len, BOUNCE_BUFFER_SIZE); pr_debug("using decomp dbounce buffer, len %x\n", dlen); } if (dlen < c->minimum) goto usesw; if (dlen > c->maximum) dlen = c->maximum; tmplen = dlen; timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT); do { dlen = tmplen; /* reset dlen, if we're retrying */ ret = ctx->driver->decompress(src, slen, dst, &dlen, ctx->wmem); } while (ret == -EBUSY && ktime_before(ktime_get(), timeout)); if (ret) { usesw: /* reset everything, sw doesn't have constraints */ src = p->in + padding; slen = be32_to_cpu(g->compressed_length); spadding = 0; dst = p->out; dlen = p->oremain; dpadding = 0; if (dlen < required_len) { /* have ignore bytes */ dst = ctx->dbounce; dlen = BOUNCE_BUFFER_SIZE; } pr_info_ratelimited("using software 842 decompression\n"); ret = sw842_decompress(src, slen, dst, &dlen); } if (ret) return ret; slen -= spadding; dlen -= ignore; if (ignore) pr_debug("ignoring last %x bytes\n", ignore); if (dst == ctx->dbounce) memcpy(p->out, dst, dlen); pr_debug("decompress slen %x padding %x dlen %x ignore %x\n", slen, padding, dlen, ignore); return update_param(p, slen + padding, dlen); } int nx842_crypto_decompress(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) { struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); struct nx842_crypto_header *hdr; struct nx842_crypto_param p; struct nx842_constraints c = *ctx->driver->constraints; int n, ret, hdr_len; u16 ignore = 0; check_constraints(&c); p.in = (u8 *)src; p.iremain = slen; p.out = dst; p.oremain = *dlen; p.ototal = 0; *dlen = 0; hdr = (struct nx842_crypto_header *)src; spin_lock_bh(&ctx->lock); /* If it doesn't start with our header magic number, assume it's a raw * 842 compressed buffer and pass it directly to the hardware driver */ if (be16_to_cpu(hdr->magic) != NX842_CRYPTO_MAGIC) { struct nx842_crypto_header_group g = { .padding = 0, .compressed_length = cpu_to_be32(p.iremain), .uncompressed_length = cpu_to_be32(p.oremain), }; ret = decompress(ctx, &p, &g, &c, 0); if (ret) goto unlock; goto success; } if (!hdr->groups) { pr_err("header has no groups\n"); ret = -EINVAL; goto unlock; } if (hdr->groups > NX842_CRYPTO_GROUP_MAX) { pr_err("header has too many groups %x, max %x\n", hdr->groups, NX842_CRYPTO_GROUP_MAX); ret = -EINVAL; goto unlock; } hdr_len = NX842_CRYPTO_HEADER_SIZE(hdr->groups); if (hdr_len > slen) { ret = -EOVERFLOW; goto unlock; } memcpy(&ctx->header, src, hdr_len); hdr = &ctx->header; for (n = 0; n < hdr->groups; n++) { /* ignore applies to last group */ if (n + 1 == hdr->groups) ignore = be16_to_cpu(hdr->ignore); ret = decompress(ctx, &p, &hdr->group[n], &c, ignore); if (ret) goto unlock; } success: *dlen = p.ototal; pr_debug("decompress total slen %x dlen %x\n", slen, *dlen); ret = 0; unlock: spin_unlock_bh(&ctx->lock); return ret; } EXPORT_SYMBOL_GPL(nx842_crypto_decompress); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver"); MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1