Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Thierry Reding | 1477 | 99.80% | 15 | 88.24% |
Ville Syrjälä | 2 | 0.14% | 1 | 5.88% |
Daniel Vetter | 1 | 0.07% | 1 | 5.88% |
Total | 1480 | 17 |
/* * Copyright (C) 2012 Avionic Design GmbH * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <linux/clk.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_panel.h> #include "drm.h" #include "dc.h" struct tegra_rgb { struct tegra_output output; struct tegra_dc *dc; struct clk *clk_parent; struct clk *clk; }; static inline struct tegra_rgb *to_rgb(struct tegra_output *output) { return container_of(output, struct tegra_rgb, output); } struct reg_entry { unsigned long offset; unsigned long value; }; static const struct reg_entry rgb_enable[] = { { DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 }, { DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 }, { DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 }, { DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 }, { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, { DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 }, { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, { DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 }, { DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 }, { DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 }, { DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 }, { DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 }, { DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 }, }; static const struct reg_entry rgb_disable[] = { { DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, { DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa }, { DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa }, { DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa }, { DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa }, { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, { DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 }, { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, { DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 }, { DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 }, { DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 }, { DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 }, }; static void tegra_dc_write_regs(struct tegra_dc *dc, const struct reg_entry *table, unsigned int num) { unsigned int i; for (i = 0; i < num; i++) tegra_dc_writel(dc, table[i].value, table[i].offset); } static const struct drm_connector_funcs tegra_rgb_connector_funcs = { .reset = drm_atomic_helper_connector_reset, .detect = tegra_output_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = tegra_output_connector_destroy, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; static enum drm_mode_status tegra_rgb_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { /* * FIXME: For now, always assume that the mode is okay. There are * unresolved issues with clk_round_rate(), which doesn't always * reliably report whether a frequency can be set or not. */ return MODE_OK; } static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = { .get_modes = tegra_output_connector_get_modes, .mode_valid = tegra_rgb_connector_mode_valid, }; static const struct drm_encoder_funcs tegra_rgb_encoder_funcs = { .destroy = tegra_output_encoder_destroy, }; static void tegra_rgb_encoder_disable(struct drm_encoder *encoder) { struct tegra_output *output = encoder_to_output(encoder); struct tegra_rgb *rgb = to_rgb(output); if (output->panel) drm_panel_disable(output->panel); tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); tegra_dc_commit(rgb->dc); if (output->panel) drm_panel_unprepare(output->panel); } static void tegra_rgb_encoder_enable(struct drm_encoder *encoder) { struct tegra_output *output = encoder_to_output(encoder); struct tegra_rgb *rgb = to_rgb(output); u32 value; if (output->panel) drm_panel_prepare(output->panel); tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL; tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS); /* XXX: parameterize? */ value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1)); value &= ~LVS_OUTPUT_POLARITY_LOW; value &= ~LHS_OUTPUT_POLARITY_LOW; tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1)); /* XXX: parameterize? */ value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB | DISP_ORDER_RED_BLUE; tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL); /* XXX: parameterize? */ value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE; tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS); tegra_dc_commit(rgb->dc); if (output->panel) drm_panel_enable(output->panel); } static int tegra_rgb_encoder_atomic_check(struct drm_encoder *encoder, struct drm_crtc_state *crtc_state, struct drm_connector_state *conn_state) { struct tegra_output *output = encoder_to_output(encoder); struct tegra_dc *dc = to_tegra_dc(conn_state->crtc); unsigned long pclk = crtc_state->mode.clock * 1000; struct tegra_rgb *rgb = to_rgb(output); unsigned int div; int err; /* * We may not want to change the frequency of the parent clock, since * it may be a parent for other peripherals. This is due to the fact * that on Tegra20 there's only a single clock dedicated to display * (pll_d_out0), whereas later generations have a second one that can * be used to independently drive a second output (pll_d2_out0). * * As a way to support multiple outputs on Tegra20 as well, pll_p is * typically used as the parent clock for the display controllers. * But this comes at a cost: pll_p is the parent of several other * peripherals, so its frequency shouldn't change out of the blue. * * The best we can do at this point is to use the shift clock divider * and hope that the desired frequency can be matched (or at least * matched sufficiently close that the panel will still work). */ div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2; pclk = 0; err = tegra_dc_state_setup_clock(dc, crtc_state, rgb->clk_parent, pclk, div); if (err < 0) { dev_err(output->dev, "failed to setup CRTC state: %d\n", err); return err; } return err; } static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = { .disable = tegra_rgb_encoder_disable, .enable = tegra_rgb_encoder_enable, .atomic_check = tegra_rgb_encoder_atomic_check, }; int tegra_dc_rgb_probe(struct tegra_dc *dc) { struct device_node *np; struct tegra_rgb *rgb; int err; np = of_get_child_by_name(dc->dev->of_node, "rgb"); if (!np || !of_device_is_available(np)) return -ENODEV; rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL); if (!rgb) return -ENOMEM; rgb->output.dev = dc->dev; rgb->output.of_node = np; rgb->dc = dc; err = tegra_output_probe(&rgb->output); if (err < 0) return err; rgb->clk = devm_clk_get(dc->dev, NULL); if (IS_ERR(rgb->clk)) { dev_err(dc->dev, "failed to get clock\n"); return PTR_ERR(rgb->clk); } rgb->clk_parent = devm_clk_get(dc->dev, "parent"); if (IS_ERR(rgb->clk_parent)) { dev_err(dc->dev, "failed to get parent clock\n"); return PTR_ERR(rgb->clk_parent); } err = clk_set_parent(rgb->clk, rgb->clk_parent); if (err < 0) { dev_err(dc->dev, "failed to set parent clock: %d\n", err); return err; } dc->rgb = &rgb->output; return 0; } int tegra_dc_rgb_remove(struct tegra_dc *dc) { if (!dc->rgb) return 0; tegra_output_remove(dc->rgb); dc->rgb = NULL; return 0; } int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc) { struct tegra_output *output = dc->rgb; int err; if (!dc->rgb) return -ENODEV; drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs, DRM_MODE_CONNECTOR_LVDS); drm_connector_helper_add(&output->connector, &tegra_rgb_connector_helper_funcs); output->connector.dpms = DRM_MODE_DPMS_OFF; drm_encoder_init(drm, &output->encoder, &tegra_rgb_encoder_funcs, DRM_MODE_ENCODER_LVDS, NULL); drm_encoder_helper_add(&output->encoder, &tegra_rgb_encoder_helper_funcs); drm_connector_attach_encoder(&output->connector, &output->encoder); drm_connector_register(&output->connector); err = tegra_output_init(drm, output); if (err < 0) { dev_err(output->dev, "failed to initialize output: %d\n", err); return err; } /* * Other outputs can be attached to either display controller. The RGB * outputs are an exception and work only with their parent display * controller. */ output->encoder.possible_crtcs = drm_crtc_mask(&dc->base); return 0; } int tegra_dc_rgb_exit(struct tegra_dc *dc) { if (dc->rgb) tegra_output_exit(dc->rgb); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1