Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Richard Pospesel | 1140 | 66.82% | 1 | 20.00% |
Chris Diamand | 534 | 31.30% | 2 | 40.00% |
Kees Cook | 31 | 1.82% | 1 | 20.00% |
Colin Ian King | 1 | 0.06% | 1 | 20.00% |
Total | 1706 | 5 |
/* * BYD TouchPad PS/2 mouse driver * * Copyright (C) 2015 Chris Diamand <chris@diamand.org> * Copyright (C) 2015 Richard Pospesel * Copyright (C) 2015 Tai Chi Minh Ralph Eastwood * Copyright (C) 2015 Martin Wimpress * Copyright (C) 2015 Jay Kuri * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ #include <linux/delay.h> #include <linux/input.h> #include <linux/libps2.h> #include <linux/serio.h> #include <linux/slab.h> #include "psmouse.h" #include "byd.h" /* PS2 Bits */ #define PS2_Y_OVERFLOW BIT_MASK(7) #define PS2_X_OVERFLOW BIT_MASK(6) #define PS2_Y_SIGN BIT_MASK(5) #define PS2_X_SIGN BIT_MASK(4) #define PS2_ALWAYS_1 BIT_MASK(3) #define PS2_MIDDLE BIT_MASK(2) #define PS2_RIGHT BIT_MASK(1) #define PS2_LEFT BIT_MASK(0) /* * BYD pad constants */ /* * True device resolution is unknown, however experiments show the * resolution is about 111 units/mm. * Absolute coordinate packets are in the range 0-255 for both X and Y * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in * the right ballpark given the touchpad's physical dimensions and estimate * resolution per spec sheet, device active area dimensions are * 101.6 x 60.1 mm. */ #define BYD_PAD_WIDTH 11264 #define BYD_PAD_HEIGHT 6656 #define BYD_PAD_RESOLUTION 111 /* * Given the above dimensions, relative packets velocity is in multiples of * 1 unit / 11 milliseconds. We use this dt to estimate distance traveled */ #define BYD_DT 11 /* Time in jiffies used to timeout various touch events (64 ms) */ #define BYD_TOUCH_TIMEOUT msecs_to_jiffies(64) /* BYD commands reverse engineered from windows driver */ /* * Swipe gesture from off-pad to on-pad * 0 : disable * 1 : enable */ #define BYD_CMD_SET_OFFSCREEN_SWIPE 0x10cc /* * Tap and drag delay time * 0 : disable * 1 - 8 : least to most delay */ #define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0x10cf /* * Physical buttons function mapping * 0 : enable * 4 : normal * 5 : left button custom command * 6 : right button custom command * 8 : disable */ #define BYD_CMD_SET_PHYSICAL_BUTTONS 0x10d0 /* * Absolute mode (1 byte X/Y resolution) * 0 : disable * 2 : enable */ #define BYD_CMD_SET_ABSOLUTE_MODE 0x10d1 /* * Two finger scrolling * 1 : vertical * 2 : horizontal * 3 : vertical + horizontal * 4 : disable */ #define BYD_CMD_SET_TWO_FINGER_SCROLL 0x10d2 /* * Handedness * 1 : right handed * 2 : left handed */ #define BYD_CMD_SET_HANDEDNESS 0x10d3 /* * Tap to click * 1 : enable * 2 : disable */ #define BYD_CMD_SET_TAP 0x10d4 /* * Tap and drag * 1 : tap and hold to drag * 2 : tap and hold to drag + lock * 3 : disable */ #define BYD_CMD_SET_TAP_DRAG 0x10d5 /* * Touch sensitivity * 1 - 7 : least to most sensitive */ #define BYD_CMD_SET_TOUCH_SENSITIVITY 0x10d6 /* * One finger scrolling * 1 : vertical * 2 : horizontal * 3 : vertical + horizontal * 4 : disable */ #define BYD_CMD_SET_ONE_FINGER_SCROLL 0x10d7 /* * One finger scrolling function * 1 : free scrolling * 2 : edge motion * 3 : free scrolling + edge motion * 4 : disable */ #define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0x10d8 /* * Sliding speed * 1 - 5 : slowest to fastest */ #define BYD_CMD_SET_SLIDING_SPEED 0x10da /* * Edge motion * 1 : disable * 2 : enable when dragging * 3 : enable when dragging and pointing */ #define BYD_CMD_SET_EDGE_MOTION 0x10db /* * Left edge region size * 0 - 7 : smallest to largest width */ #define BYD_CMD_SET_LEFT_EDGE_REGION 0x10dc /* * Top edge region size * 0 - 9 : smallest to largest height */ #define BYD_CMD_SET_TOP_EDGE_REGION 0x10dd /* * Disregard palm press as clicks * 1 - 6 : smallest to largest */ #define BYD_CMD_SET_PALM_CHECK 0x10de /* * Right edge region size * 0 - 7 : smallest to largest width */ #define BYD_CMD_SET_RIGHT_EDGE_REGION 0x10df /* * Bottom edge region size * 0 - 9 : smallest to largest height */ #define BYD_CMD_SET_BOTTOM_EDGE_REGION 0x10e1 /* * Multitouch gestures * 1 : enable * 2 : disable */ #define BYD_CMD_SET_MULTITOUCH 0x10e3 /* * Edge motion speed * 0 : control with finger pressure * 1 - 9 : slowest to fastest */ #define BYD_CMD_SET_EDGE_MOTION_SPEED 0x10e4 /* * Two finger scolling function * 0 : free scrolling * 1 : free scrolling (with momentum) * 2 : edge motion * 3 : free scrolling (with momentum) + edge motion * 4 : disable */ #define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0x10e5 /* * The touchpad generates a mixture of absolute and relative packets, indicated * by the the last byte of each packet being set to one of the following: */ #define BYD_PACKET_ABSOLUTE 0xf8 #define BYD_PACKET_RELATIVE 0x00 /* Multitouch gesture packets */ #define BYD_PACKET_PINCH_IN 0xd8 #define BYD_PACKET_PINCH_OUT 0x28 #define BYD_PACKET_ROTATE_CLOCKWISE 0x29 #define BYD_PACKET_ROTATE_ANTICLOCKWISE 0xd7 #define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT 0x2a #define BYD_PACKET_TWO_FINGER_SCROLL_DOWN 0x2b #define BYD_PACKET_TWO_FINGER_SCROLL_UP 0xd5 #define BYD_PACKET_TWO_FINGER_SCROLL_LEFT 0xd6 #define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT 0x2c #define BYD_PACKET_THREE_FINGER_SWIPE_DOWN 0x2d #define BYD_PACKET_THREE_FINGER_SWIPE_UP 0xd3 #define BYD_PACKET_THREE_FINGER_SWIPE_LEFT 0xd4 #define BYD_PACKET_FOUR_FINGER_DOWN 0x33 #define BYD_PACKET_FOUR_FINGER_UP 0xcd #define BYD_PACKET_REGION_SCROLL_RIGHT 0x35 #define BYD_PACKET_REGION_SCROLL_DOWN 0x36 #define BYD_PACKET_REGION_SCROLL_UP 0xca #define BYD_PACKET_REGION_SCROLL_LEFT 0xcb #define BYD_PACKET_RIGHT_CORNER_CLICK 0xd2 #define BYD_PACKET_LEFT_CORNER_CLICK 0x2e #define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK 0x2f #define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT 0x37 #define BYD_PACKET_ONTO_PAD_SWIPE_DOWN 0x30 #define BYD_PACKET_ONTO_PAD_SWIPE_UP 0xd0 #define BYD_PACKET_ONTO_PAD_SWIPE_LEFT 0xc9 struct byd_data { struct timer_list timer; struct psmouse *psmouse; s32 abs_x; s32 abs_y; typeof(jiffies) last_touch_time; bool btn_left; bool btn_right; bool touch; }; static void byd_report_input(struct psmouse *psmouse) { struct byd_data *priv = psmouse->private; struct input_dev *dev = psmouse->dev; input_report_key(dev, BTN_TOUCH, priv->touch); input_report_key(dev, BTN_TOOL_FINGER, priv->touch); input_report_abs(dev, ABS_X, priv->abs_x); input_report_abs(dev, ABS_Y, priv->abs_y); input_report_key(dev, BTN_LEFT, priv->btn_left); input_report_key(dev, BTN_RIGHT, priv->btn_right); input_sync(dev); } static void byd_clear_touch(struct timer_list *t) { struct byd_data *priv = from_timer(priv, t, timer); struct psmouse *psmouse = priv->psmouse; serio_pause_rx(psmouse->ps2dev.serio); priv->touch = false; byd_report_input(psmouse); serio_continue_rx(psmouse->ps2dev.serio); /* * Move cursor back to center of pad when we lose touch - this * specifically improves user experience when moving cursor with one * finger, and pressing a button with another. */ priv->abs_x = BYD_PAD_WIDTH / 2; priv->abs_y = BYD_PAD_HEIGHT / 2; } static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) { struct byd_data *priv = psmouse->private; u8 *pkt = psmouse->packet; if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) { psmouse_warn(psmouse, "Always_1 bit not 1. pkt[0] = %02x\n", pkt[0]); return PSMOUSE_BAD_DATA; } if (psmouse->pktcnt < psmouse->pktsize) return PSMOUSE_GOOD_DATA; /* Otherwise, a full packet has been received */ switch (pkt[3]) { case BYD_PACKET_ABSOLUTE: /* Only use absolute packets for the start of movement. */ if (!priv->touch) { /* needed to detect tap */ typeof(jiffies) tap_time = priv->last_touch_time + BYD_TOUCH_TIMEOUT; priv->touch = time_after(jiffies, tap_time); /* init abs position */ priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256); priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256); } break; case BYD_PACKET_RELATIVE: { /* Standard packet */ /* Sign-extend if a sign bit is set. */ u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0; u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0; s32 dx = signx | (int) pkt[1]; s32 dy = signy | (int) pkt[2]; /* Update position based on velocity */ priv->abs_x += dx * BYD_DT; priv->abs_y -= dy * BYD_DT; priv->touch = true; break; } default: psmouse_warn(psmouse, "Unrecognized Z: pkt = %02x %02x %02x %02x\n", psmouse->packet[0], psmouse->packet[1], psmouse->packet[2], psmouse->packet[3]); return PSMOUSE_BAD_DATA; } priv->btn_left = pkt[0] & PS2_LEFT; priv->btn_right = pkt[0] & PS2_RIGHT; byd_report_input(psmouse); /* Reset time since last touch. */ if (priv->touch) { priv->last_touch_time = jiffies; mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT); } return PSMOUSE_FULL_PACKET; } static int byd_reset_touchpad(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; u8 param[4]; size_t i; static const struct { u16 command; u8 arg; } seq[] = { /* * Intellimouse initialization sequence, to get 4-byte instead * of 3-byte packets. */ { PSMOUSE_CMD_SETRATE, 0xC8 }, { PSMOUSE_CMD_SETRATE, 0x64 }, { PSMOUSE_CMD_SETRATE, 0x50 }, { PSMOUSE_CMD_GETID, 0 }, { PSMOUSE_CMD_ENABLE, 0 }, /* * BYD-specific initialization, which enables absolute mode and * (if desired), the touchpad's built-in gesture detection. */ { 0x10E2, 0x00 }, { 0x10E0, 0x02 }, /* The touchpad should reply with 4 seemingly-random bytes */ { 0x14E0, 0x01 }, /* Pairs of parameters and values. */ { BYD_CMD_SET_HANDEDNESS, 0x01 }, { BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 }, { BYD_CMD_SET_TAP, 0x02 }, { BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 }, { BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 }, { BYD_CMD_SET_EDGE_MOTION, 0x01 }, { BYD_CMD_SET_PALM_CHECK, 0x00 }, { BYD_CMD_SET_MULTITOUCH, 0x02 }, { BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 }, { BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 }, { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 }, { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 }, { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 }, { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 }, { BYD_CMD_SET_ABSOLUTE_MODE, 0x02 }, /* Finalize initialization. */ { 0x10E0, 0x00 }, { 0x10E2, 0x01 }, }; for (i = 0; i < ARRAY_SIZE(seq); ++i) { memset(param, 0, sizeof(param)); param[0] = seq[i].arg; if (ps2_command(ps2dev, param, seq[i].command)) return -EIO; } psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); return 0; } static int byd_reconnect(struct psmouse *psmouse) { int retry = 0, error = 0; psmouse_dbg(psmouse, "Reconnect\n"); do { psmouse_reset(psmouse); if (retry) ssleep(1); error = byd_detect(psmouse, 0); } while (error && ++retry < 3); if (error) return error; psmouse_dbg(psmouse, "Reconnected after %d attempts\n", retry); error = byd_reset_touchpad(psmouse); if (error) { psmouse_err(psmouse, "Unable to initialize device\n"); return error; } return 0; } static void byd_disconnect(struct psmouse *psmouse) { struct byd_data *priv = psmouse->private; if (priv) { del_timer(&priv->timer); kfree(psmouse->private); psmouse->private = NULL; } } int byd_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; u8 param[4] = {0x03, 0x00, 0x00, 0x00}; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) return -1; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) return -1; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) return -1; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) return -1; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return -1; if (param[1] != 0x03 || param[2] != 0x64) return -ENODEV; psmouse_dbg(psmouse, "BYD touchpad detected\n"); if (set_properties) { psmouse->vendor = "BYD"; psmouse->name = "TouchPad"; } return 0; } int byd_init(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct byd_data *priv; if (psmouse_reset(psmouse)) return -EIO; if (byd_reset_touchpad(psmouse)) return -EIO; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->psmouse = psmouse; timer_setup(&priv->timer, byd_clear_touch, 0); psmouse->private = priv; psmouse->disconnect = byd_disconnect; psmouse->reconnect = byd_reconnect; psmouse->protocol_handler = byd_process_byte; psmouse->pktsize = 4; psmouse->resync_time = 0; __set_bit(INPUT_PROP_POINTER, dev->propbit); /* Touchpad */ __set_bit(BTN_TOUCH, dev->keybit); __set_bit(BTN_TOOL_FINGER, dev->keybit); /* Buttons */ __set_bit(BTN_LEFT, dev->keybit); __set_bit(BTN_RIGHT, dev->keybit); __clear_bit(BTN_MIDDLE, dev->keybit); /* Absolute position */ __set_bit(EV_ABS, dev->evbit); input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0); input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0); input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION); input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION); /* No relative support */ __clear_bit(EV_REL, dev->evbit); __clear_bit(REL_X, dev->relbit); __clear_bit(REL_Y, dev->relbit); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1