| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Mark Brown | 811 | 98.30% | 2 | 28.57% |
| Axel Lin | 7 | 0.85% | 1 | 14.29% |
| Wolfram Sang | 3 | 0.36% | 1 | 14.29% |
| JJ Ding | 2 | 0.24% | 1 | 14.29% |
| André Goddard Rosa | 1 | 0.12% | 1 | 14.29% |
| Thomas Gleixner | 1 | 0.12% | 1 | 14.29% |
| Total | 825 | 7 |
/* * zylonite-wm97xx.c -- Zylonite Continuous Touch screen driver * * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC. * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> * Parts Copyright : Ian Molton <spyro@f2s.com> * Andrew Zabolotny <zap@homelink.ru> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * Notes: * This is a wm97xx extended touch driver supporting interrupt driven * and continuous operation on Marvell Zylonite development systems * (which have a WM9713 on board). */ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/wm97xx.h> #include <mach/hardware.h> #include <mach/mfp.h> #include <mach/regs-ac97.h> struct continuous { u16 id; /* codec id */ u8 code; /* continuous code */ u8 reads; /* number of coord reads per read cycle */ u32 speed; /* number of coords per second */ }; #define WM_READS(sp) ((sp / HZ) + 1) static const struct continuous cinfo[] = { { WM9713_ID2, 0, WM_READS(94), 94 }, { WM9713_ID2, 1, WM_READS(120), 120 }, { WM9713_ID2, 2, WM_READS(154), 154 }, { WM9713_ID2, 3, WM_READS(188), 188 }, }; /* continuous speed index */ static int sp_idx; /* * Pen sampling frequency (Hz) in continuous mode. */ static int cont_rate = 200; module_param(cont_rate, int, 0); MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); /* * Pressure readback. * * Set to 1 to read back pen down pressure */ static int pressure; module_param(pressure, int, 0); MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); /* * AC97 touch data slot. * * Touch screen readback data ac97 slot */ static int ac97_touch_slot = 5; module_param(ac97_touch_slot, int, 0); MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); /* flush AC97 slot 5 FIFO machines */ static void wm97xx_acc_pen_up(struct wm97xx *wm) { int i; msleep(1); for (i = 0; i < 16; i++) MODR; } static int wm97xx_acc_pen_down(struct wm97xx *wm) { u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; int reads = 0; static u16 last, tries; /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low * threshold set to use the notifications it gives. */ msleep(1); if (tries > 5) { tries = 0; return RC_PENUP; } x = MODR; if (x == last) { tries++; return RC_AGAIN; } last = x; do { if (reads) x = MODR; y = MODR; if (pressure) p = MODR; dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n", x, y, p); /* are samples valid */ if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X || (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y || (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES) goto up; /* coordinate is good */ tries = 0; input_report_abs(wm->input_dev, ABS_X, x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); input_sync(wm->input_dev); reads++; } while (reads < cinfo[sp_idx].reads); up: return RC_PENDOWN | RC_AGAIN; } static int wm97xx_acc_startup(struct wm97xx *wm) { int idx; /* check we have a codec */ if (wm->ac97 == NULL) return -ENODEV; /* Go you big red fire engine */ for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { if (wm->id != cinfo[idx].id) continue; sp_idx = idx; if (cont_rate <= cinfo[idx].speed) break; } wm->acc_rate = cinfo[sp_idx].code; wm->acc_slot = ac97_touch_slot; dev_info(wm->dev, "zylonite accelerated touchscreen driver, %d samples/sec\n", cinfo[sp_idx].speed); return 0; } static void wm97xx_irq_enable(struct wm97xx *wm, int enable) { if (enable) enable_irq(wm->pen_irq); else disable_irq_nosync(wm->pen_irq); } static struct wm97xx_mach_ops zylonite_mach_ops = { .acc_enabled = 1, .acc_pen_up = wm97xx_acc_pen_up, .acc_pen_down = wm97xx_acc_pen_down, .acc_startup = wm97xx_acc_startup, .irq_enable = wm97xx_irq_enable, .irq_gpio = WM97XX_GPIO_2, }; static int zylonite_wm97xx_probe(struct platform_device *pdev) { struct wm97xx *wm = platform_get_drvdata(pdev); int gpio_touch_irq; if (cpu_is_pxa320()) gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15); else gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26); wm->pen_irq = gpio_to_irq(gpio_touch_irq); irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH); wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, WM97XX_GPIO_POL_HIGH, WM97XX_GPIO_STICKY, WM97XX_GPIO_WAKE); wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, WM97XX_GPIO_POL_HIGH, WM97XX_GPIO_NOTSTICKY, WM97XX_GPIO_NOWAKE); return wm97xx_register_mach_ops(wm, &zylonite_mach_ops); } static int zylonite_wm97xx_remove(struct platform_device *pdev) { struct wm97xx *wm = platform_get_drvdata(pdev); wm97xx_unregister_mach_ops(wm); return 0; } static struct platform_driver zylonite_wm97xx_driver = { .probe = zylonite_wm97xx_probe, .remove = zylonite_wm97xx_remove, .driver = { .name = "wm97xx-touch", }, }; module_platform_driver(zylonite_wm97xx_driver); /* Module information */ MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1