Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Benjamin Collins | 1333 | 97.66% | 2 | 20.00% |
Krzysztof Hałasa | 16 | 1.17% | 2 | 20.00% |
Hans Verkuil | 6 | 0.44% | 2 | 20.00% |
facugaich | 5 | 0.37% | 1 | 10.00% |
Ingo Molnar | 3 | 0.22% | 1 | 10.00% |
Dan Carpenter | 1 | 0.07% | 1 | 10.00% |
Mauro Carvalho Chehab | 1 | 0.07% | 1 | 10.00% |
Total | 1365 | 10 |
/* * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com> * * Original author: * Ben Collins <bcollins@ubuntu.com> * * Additional work by: * John Brooks <john.brooks@bluecherry.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* XXX: The SOLO6x10 i2c does not have separate interrupts for each i2c * channel. The bus can only handle one i2c event at a time. The below handles * this all wrong. We should be using the status registers to see if the bus * is in use, and have a global lock to check the status register. Also, * the bulk of the work should be handled out-of-interrupt. The ugly loops * that occur during interrupt scare me. The ISR should merely signal * thread context, ACK the interrupt, and move on. -- BenC */ #include <linux/kernel.h> #include <linux/sched/signal.h> #include "solo6x10.h" u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off) { struct i2c_msg msgs[2]; u8 data; msgs[0].flags = 0; msgs[0].addr = addr; msgs[0].len = 1; msgs[0].buf = &off; msgs[1].flags = I2C_M_RD; msgs[1].addr = addr; msgs[1].len = 1; msgs[1].buf = &data; i2c_transfer(&solo_dev->i2c_adap[id], msgs, 2); return data; } void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off, u8 data) { struct i2c_msg msgs; u8 buf[2]; buf[0] = off; buf[1] = data; msgs.flags = 0; msgs.addr = addr; msgs.len = 2; msgs.buf = buf; i2c_transfer(&solo_dev->i2c_adap[id], &msgs, 1); } static void solo_i2c_flush(struct solo_dev *solo_dev, int wr) { u32 ctrl; ctrl = SOLO_IIC_CH_SET(solo_dev->i2c_id); if (solo_dev->i2c_state == IIC_STATE_START) ctrl |= SOLO_IIC_START; if (wr) { ctrl |= SOLO_IIC_WRITE; } else { ctrl |= SOLO_IIC_READ; if (!(solo_dev->i2c_msg->flags & I2C_M_NO_RD_ACK)) ctrl |= SOLO_IIC_ACK_EN; } if (solo_dev->i2c_msg_ptr == solo_dev->i2c_msg->len) ctrl |= SOLO_IIC_STOP; solo_reg_write(solo_dev, SOLO_IIC_CTRL, ctrl); } static void solo_i2c_start(struct solo_dev *solo_dev) { u32 addr = solo_dev->i2c_msg->addr << 1; if (solo_dev->i2c_msg->flags & I2C_M_RD) addr |= 1; solo_dev->i2c_state = IIC_STATE_START; solo_reg_write(solo_dev, SOLO_IIC_TXD, addr); solo_i2c_flush(solo_dev, 1); } static void solo_i2c_stop(struct solo_dev *solo_dev) { solo_irq_off(solo_dev, SOLO_IRQ_IIC); solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0); solo_dev->i2c_state = IIC_STATE_STOP; wake_up(&solo_dev->i2c_wait); } static int solo_i2c_handle_read(struct solo_dev *solo_dev) { prepare_read: if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) { solo_i2c_flush(solo_dev, 0); return 0; } solo_dev->i2c_msg_ptr = 0; solo_dev->i2c_msg++; solo_dev->i2c_msg_num--; if (solo_dev->i2c_msg_num == 0) { solo_i2c_stop(solo_dev); return 0; } if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) { solo_i2c_start(solo_dev); } else { if (solo_dev->i2c_msg->flags & I2C_M_RD) goto prepare_read; else solo_i2c_stop(solo_dev); } return 0; } static int solo_i2c_handle_write(struct solo_dev *solo_dev) { retry_write: if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) { solo_reg_write(solo_dev, SOLO_IIC_TXD, solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr]); solo_dev->i2c_msg_ptr++; solo_i2c_flush(solo_dev, 1); return 0; } solo_dev->i2c_msg_ptr = 0; solo_dev->i2c_msg++; solo_dev->i2c_msg_num--; if (solo_dev->i2c_msg_num == 0) { solo_i2c_stop(solo_dev); return 0; } if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) { solo_i2c_start(solo_dev); } else { if (solo_dev->i2c_msg->flags & I2C_M_RD) solo_i2c_stop(solo_dev); else goto retry_write; } return 0; } int solo_i2c_isr(struct solo_dev *solo_dev) { u32 status = solo_reg_read(solo_dev, SOLO_IIC_CTRL); int ret = -EINVAL; if (CHK_FLAGS(status, SOLO_IIC_STATE_TRNS | SOLO_IIC_STATE_SIG_ERR) || solo_dev->i2c_id < 0) { solo_i2c_stop(solo_dev); return -ENXIO; } switch (solo_dev->i2c_state) { case IIC_STATE_START: if (solo_dev->i2c_msg->flags & I2C_M_RD) { solo_dev->i2c_state = IIC_STATE_READ; ret = solo_i2c_handle_read(solo_dev); break; } solo_dev->i2c_state = IIC_STATE_WRITE; /* fall through */ case IIC_STATE_WRITE: ret = solo_i2c_handle_write(solo_dev); break; case IIC_STATE_READ: solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr] = solo_reg_read(solo_dev, SOLO_IIC_RXD); solo_dev->i2c_msg_ptr++; ret = solo_i2c_handle_read(solo_dev); break; default: solo_i2c_stop(solo_dev); } return ret; } static int solo_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct solo_dev *solo_dev = adap->algo_data; unsigned long timeout; int ret; int i; DEFINE_WAIT(wait); for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { if (&solo_dev->i2c_adap[i] == adap) break; } if (i == SOLO_I2C_ADAPTERS) return num; /* XXX Right return value for failure? */ mutex_lock(&solo_dev->i2c_mutex); solo_dev->i2c_id = i; solo_dev->i2c_msg = msgs; solo_dev->i2c_msg_num = num; solo_dev->i2c_msg_ptr = 0; solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0); solo_irq_on(solo_dev, SOLO_IRQ_IIC); solo_i2c_start(solo_dev); timeout = HZ / 2; for (;;) { prepare_to_wait(&solo_dev->i2c_wait, &wait, TASK_INTERRUPTIBLE); if (solo_dev->i2c_state == IIC_STATE_STOP) break; timeout = schedule_timeout(timeout); if (!timeout) break; if (signal_pending(current)) break; } finish_wait(&solo_dev->i2c_wait, &wait); ret = num - solo_dev->i2c_msg_num; solo_dev->i2c_state = IIC_STATE_IDLE; solo_dev->i2c_id = -1; mutex_unlock(&solo_dev->i2c_mutex); return ret; } static u32 solo_i2c_functionality(struct i2c_adapter *adap) { return I2C_FUNC_I2C; } static const struct i2c_algorithm solo_i2c_algo = { .master_xfer = solo_i2c_master_xfer, .functionality = solo_i2c_functionality, }; int solo_i2c_init(struct solo_dev *solo_dev) { int i; int ret; solo_reg_write(solo_dev, SOLO_IIC_CFG, SOLO_IIC_PRESCALE(8) | SOLO_IIC_ENABLE); solo_dev->i2c_id = -1; solo_dev->i2c_state = IIC_STATE_IDLE; init_waitqueue_head(&solo_dev->i2c_wait); mutex_init(&solo_dev->i2c_mutex); for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { struct i2c_adapter *adap = &solo_dev->i2c_adap[i]; snprintf(adap->name, I2C_NAME_SIZE, "%s I2C %d", SOLO6X10_NAME, i); adap->algo = &solo_i2c_algo; adap->algo_data = solo_dev; adap->retries = 1; adap->dev.parent = &solo_dev->pdev->dev; ret = i2c_add_adapter(adap); if (ret) { adap->algo_data = NULL; break; } } if (ret) { for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { if (!solo_dev->i2c_adap[i].algo_data) break; i2c_del_adapter(&solo_dev->i2c_adap[i]); solo_dev->i2c_adap[i].algo_data = NULL; } return ret; } return 0; } void solo_i2c_exit(struct solo_dev *solo_dev) { int i; for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { if (!solo_dev->i2c_adap[i].algo_data) continue; i2c_del_adapter(&solo_dev->i2c_adap[i]); solo_dev->i2c_adap[i].algo_data = NULL; } }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1