Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Archit Taneja | 1271 | 94.36% | 3 | 37.50% |
Benoit Parrot | 66 | 4.90% | 2 | 25.00% |
Bartlomiej Zolnierkiewicz | 6 | 0.45% | 1 | 12.50% |
Hans Verkuil | 3 | 0.22% | 1 | 12.50% |
Behan Webster | 1 | 0.07% | 1 | 12.50% |
Total | 1347 | 8 |
/* * Scaler library * * Copyright (c) 2013 Texas Instruments Inc. * * David Griego, <dagriego@biglakesoftware.com> * Dale Farnsworth, <dale@farnsworth.org> * Archit Taneja, <archit@ti.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> #include "sc.h" #include "sc_coeff.h" void sc_dump_regs(struct sc_data *sc) { struct device *dev = &sc->pdev->dev; #define DUMPREG(r) dev_dbg(dev, "%-35s %08x\n", #r, \ ioread32(sc->base + CFG_##r)) dev_dbg(dev, "SC Registers @ %pa:\n", &sc->res->start); DUMPREG(SC0); DUMPREG(SC1); DUMPREG(SC2); DUMPREG(SC3); DUMPREG(SC4); DUMPREG(SC5); DUMPREG(SC6); DUMPREG(SC8); DUMPREG(SC9); DUMPREG(SC10); DUMPREG(SC11); DUMPREG(SC12); DUMPREG(SC13); DUMPREG(SC17); DUMPREG(SC18); DUMPREG(SC19); DUMPREG(SC20); DUMPREG(SC21); DUMPREG(SC22); DUMPREG(SC23); DUMPREG(SC24); DUMPREG(SC25); #undef DUMPREG } EXPORT_SYMBOL(sc_dump_regs); /* * set the horizontal scaler coefficients according to the ratio of output to * input widths, after accounting for up to two levels of decimation */ void sc_set_hs_coeffs(struct sc_data *sc, void *addr, unsigned int src_w, unsigned int dst_w) { int sixteenths; int idx; int i, j; u16 *coeff_h = addr; const u16 *cp; if (dst_w > src_w) { idx = HS_UP_SCALE; } else { if ((dst_w << 1) < src_w) dst_w <<= 1; /* first level decimation */ if ((dst_w << 1) < src_w) dst_w <<= 1; /* second level decimation */ if (dst_w == src_w) { idx = HS_LE_16_16_SCALE; } else { sixteenths = (dst_w << 4) / src_w; if (sixteenths < 8) sixteenths = 8; idx = HS_LT_9_16_SCALE + sixteenths - 8; } } cp = scaler_hs_coeffs[idx]; for (i = 0; i < SC_NUM_PHASES * 2; i++) { for (j = 0; j < SC_H_NUM_TAPS; j++) *coeff_h++ = *cp++; /* * for each phase, the scaler expects space for 8 coefficients * in it's memory. For the horizontal scaler, we copy the first * 7 coefficients and skip the last slot to move to the next * row to hold coefficients for the next phase */ coeff_h += SC_NUM_TAPS_MEM_ALIGN - SC_H_NUM_TAPS; } sc->load_coeff_h = true; } EXPORT_SYMBOL(sc_set_hs_coeffs); /* * set the vertical scaler coefficients according to the ratio of output to * input heights */ void sc_set_vs_coeffs(struct sc_data *sc, void *addr, unsigned int src_h, unsigned int dst_h) { int sixteenths; int idx; int i, j; u16 *coeff_v = addr; const u16 *cp; if (dst_h > src_h) { idx = VS_UP_SCALE; } else if (dst_h == src_h) { idx = VS_1_TO_1_SCALE; } else { sixteenths = (dst_h << 4) / src_h; if (sixteenths < 8) sixteenths = 8; idx = VS_LT_9_16_SCALE + sixteenths - 8; } cp = scaler_vs_coeffs[idx]; for (i = 0; i < SC_NUM_PHASES * 2; i++) { for (j = 0; j < SC_V_NUM_TAPS; j++) *coeff_v++ = *cp++; /* * for the vertical scaler, we copy the first 5 coefficients and * skip the last 3 slots to move to the next row to hold * coefficients for the next phase */ coeff_v += SC_NUM_TAPS_MEM_ALIGN - SC_V_NUM_TAPS; } sc->load_coeff_v = true; } EXPORT_SYMBOL(sc_set_vs_coeffs); void sc_config_scaler(struct sc_data *sc, u32 *sc_reg0, u32 *sc_reg8, u32 *sc_reg17, unsigned int src_w, unsigned int src_h, unsigned int dst_w, unsigned int dst_h) { struct device *dev = &sc->pdev->dev; u32 val; int dcm_x, dcm_shift; bool use_rav; unsigned long lltmp; u32 lin_acc_inc, lin_acc_inc_u; u32 col_acc_offset; u16 factor = 0; int row_acc_init_rav = 0, row_acc_init_rav_b = 0; u32 row_acc_inc = 0, row_acc_offset = 0, row_acc_offset_b = 0; /* * location of SC register in payload memory with respect to the first * register in the mmr address data block */ u32 *sc_reg9 = sc_reg8 + 1; u32 *sc_reg12 = sc_reg8 + 4; u32 *sc_reg13 = sc_reg8 + 5; u32 *sc_reg24 = sc_reg17 + 7; val = sc_reg0[0]; /* clear all the features(they may get enabled elsewhere later) */ val &= ~(CFG_SELFGEN_FID | CFG_TRIM | CFG_ENABLE_SIN2_VER_INTP | CFG_INTERLACE_I | CFG_DCM_4X | CFG_DCM_2X | CFG_AUTO_HS | CFG_ENABLE_EV | CFG_USE_RAV | CFG_INVT_FID | CFG_SC_BYPASS | CFG_INTERLACE_O | CFG_Y_PK_EN | CFG_HP_BYPASS | CFG_LINEAR); if (src_w == dst_w && src_h == dst_h) { val |= CFG_SC_BYPASS; sc_reg0[0] = val; return; } /* we only support linear scaling for now */ val |= CFG_LINEAR; /* configure horizontal scaler */ /* enable 2X or 4X decimation */ dcm_x = src_w / dst_w; if (dcm_x > 4) { val |= CFG_DCM_4X; dcm_shift = 2; } else if (dcm_x > 2) { val |= CFG_DCM_2X; dcm_shift = 1; } else { dcm_shift = 0; } lltmp = dst_w - 1; lin_acc_inc = div64_u64(((u64)(src_w >> dcm_shift) - 1) << 24, lltmp); lin_acc_inc_u = 0; col_acc_offset = 0; dev_dbg(dev, "hs config: src_w = %d, dst_w = %d, decimation = %s, lin_acc_inc = %08x\n", src_w, dst_w, dcm_shift == 2 ? "4x" : (dcm_shift == 1 ? "2x" : "none"), lin_acc_inc); /* configure vertical scaler */ /* use RAV for vertical scaler if vertical downscaling is > 4x */ if (dst_h < (src_h >> 2)) { use_rav = true; val |= CFG_USE_RAV; } else { use_rav = false; } if (use_rav) { /* use RAV */ factor = (u16) ((dst_h << 10) / src_h); row_acc_init_rav = factor + ((1 + factor) >> 1); if (row_acc_init_rav >= 1024) row_acc_init_rav -= 1024; row_acc_init_rav_b = row_acc_init_rav + (1 + (row_acc_init_rav >> 1)) - (1024 >> 1); if (row_acc_init_rav_b < 0) { row_acc_init_rav_b += row_acc_init_rav; row_acc_init_rav *= 2; } dev_dbg(dev, "vs config(RAV): src_h = %d, dst_h = %d, factor = %d, acc_init = %08x, acc_init_b = %08x\n", src_h, dst_h, factor, row_acc_init_rav, row_acc_init_rav_b); } else { /* use polyphase */ row_acc_inc = ((src_h - 1) << 16) / (dst_h - 1); row_acc_offset = 0; row_acc_offset_b = 0; dev_dbg(dev, "vs config(POLY): src_h = %d, dst_h = %d,row_acc_inc = %08x\n", src_h, dst_h, row_acc_inc); } sc_reg0[0] = val; sc_reg0[1] = row_acc_inc; sc_reg0[2] = row_acc_offset; sc_reg0[3] = row_acc_offset_b; sc_reg0[4] = ((lin_acc_inc_u & CFG_LIN_ACC_INC_U_MASK) << CFG_LIN_ACC_INC_U_SHIFT) | (dst_w << CFG_TAR_W_SHIFT) | (dst_h << CFG_TAR_H_SHIFT); sc_reg0[5] = (src_w << CFG_SRC_W_SHIFT) | (src_h << CFG_SRC_H_SHIFT); sc_reg0[6] = (row_acc_init_rav_b << CFG_ROW_ACC_INIT_RAV_B_SHIFT) | (row_acc_init_rav << CFG_ROW_ACC_INIT_RAV_SHIFT); *sc_reg9 = lin_acc_inc; *sc_reg12 = col_acc_offset << CFG_COL_ACC_OFFSET_SHIFT; *sc_reg13 = factor; *sc_reg24 = (src_w << CFG_ORG_W_SHIFT) | (src_h << CFG_ORG_H_SHIFT); } EXPORT_SYMBOL(sc_config_scaler); struct sc_data *sc_create(struct platform_device *pdev, const char *res_name) { struct sc_data *sc; dev_dbg(&pdev->dev, "sc_create\n"); sc = devm_kzalloc(&pdev->dev, sizeof(*sc), GFP_KERNEL); if (!sc) { dev_err(&pdev->dev, "couldn't alloc sc_data\n"); return ERR_PTR(-ENOMEM); } sc->pdev = pdev; sc->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); if (!sc->res) { dev_err(&pdev->dev, "missing '%s' platform resources data\n", res_name); return ERR_PTR(-ENODEV); } sc->base = devm_ioremap_resource(&pdev->dev, sc->res); if (IS_ERR(sc->base)) { dev_err(&pdev->dev, "failed to ioremap\n"); return ERR_CAST(sc->base); } return sc; } EXPORT_SYMBOL(sc_create); MODULE_DESCRIPTION("TI VIP/VPE Scaler"); MODULE_AUTHOR("Texas Instruments Inc."); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1