Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Michael Ira Krufky | 1293 | 52.73% | 12 | 25.00% |
Mike Isely | 1049 | 42.78% | 26 | 54.17% |
Tim Gardner | 40 | 1.63% | 1 | 2.08% |
Mauro Carvalho Chehab | 30 | 1.22% | 2 | 4.17% |
Steven Toth | 25 | 1.02% | 3 | 6.25% |
Gary Francis | 6 | 0.24% | 1 | 2.08% |
Adrian Bunk | 5 | 0.20% | 1 | 2.08% |
Paul Gortmaker | 3 | 0.12% | 1 | 2.08% |
Sakari Ailus | 1 | 0.04% | 1 | 2.08% |
Total | 2452 | 48 |
/* * * * Copyright (C) 2007 Mike Isely <isely@pobox.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ /* This source file should encompass ALL per-device type information for the driver. To define a new device, add elements to the pvr2_device_table and pvr2_device_desc structures. */ #include "pvrusb2-devattr.h" #include <linux/usb.h> #include <linux/module.h> /* This is needed in order to pull in tuner type ids... */ #include <linux/i2c.h> #include <media/tuner.h> #ifdef CONFIG_VIDEO_PVRUSB2_DVB #include "pvrusb2-hdw-internal.h" #include "lgdt330x.h" #include "s5h1409.h" #include "s5h1411.h" #include "tda10048.h" #include "tda18271.h" #include "tda8290.h" #include "tuner-simple.h" #endif /*------------------------------------------------------------------------*/ /* Hauppauge PVR-USB2 Model 29xxx */ static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = { { .module_id = PVR2_CLIENT_ID_SAA7115 }, { .module_id = PVR2_CLIENT_ID_MSP3400 }, { .module_id = PVR2_CLIENT_ID_TUNER }, { .module_id = PVR2_CLIENT_ID_DEMOD }, }; #define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw" static const char *pvr2_fw1_names_29xxx[] = { PVR2_FIRMWARE_29xxx, }; static const struct pvr2_device_desc pvr2_device_29xxx = { .description = "WinTV PVR USB2 Model 29xxx", .shortname = "29xxx", .client_table.lst = pvr2_cli_29xxx, .client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx), .fx2_firmware.lst = pvr2_fw1_names_29xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), .flag_has_hauppauge_rom = !0, .flag_has_analogtuner = !0, .flag_has_fmradio = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, .ir_scheme = PVR2_IR_SCHEME_29XXX, }; /*------------------------------------------------------------------------*/ /* Hauppauge PVR-USB2 Model 24xxx */ static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = { { .module_id = PVR2_CLIENT_ID_CX25840 }, { .module_id = PVR2_CLIENT_ID_TUNER }, { .module_id = PVR2_CLIENT_ID_WM8775 }, { .module_id = PVR2_CLIENT_ID_DEMOD }, }; #define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw" static const char *pvr2_fw1_names_24xxx[] = { PVR2_FIRMWARE_24xxx, }; static const struct pvr2_device_desc pvr2_device_24xxx = { .description = "WinTV PVR USB2 Model 24xxx", .shortname = "24xxx", .client_table.lst = pvr2_cli_24xxx, .client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx), .fx2_firmware.lst = pvr2_fw1_names_24xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), .flag_has_cx25840 = !0, .flag_has_wm8775 = !0, .flag_has_hauppauge_rom = !0, .flag_has_analogtuner = !0, .flag_has_fmradio = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, .ir_scheme = PVR2_IR_SCHEME_24XXX, }; /*------------------------------------------------------------------------*/ /* GOTVIEW USB2.0 DVD2 */ static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = { { .module_id = PVR2_CLIENT_ID_CX25840 }, { .module_id = PVR2_CLIENT_ID_TUNER }, { .module_id = PVR2_CLIENT_ID_DEMOD }, }; static const struct pvr2_device_desc pvr2_device_gotview_2 = { .description = "Gotview USB 2.0 DVD 2", .shortname = "gv2", .client_table.lst = pvr2_cli_gotview_2, .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), .flag_has_cx25840 = !0, .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .flag_has_analogtuner = !0, .flag_has_fmradio = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, }; /*------------------------------------------------------------------------*/ /* GOTVIEW USB2.0 DVD Deluxe */ /* (same module list as gotview_2) */ static const struct pvr2_device_desc pvr2_device_gotview_2d = { .description = "Gotview USB 2.0 DVD Deluxe", .shortname = "gv2d", .client_table.lst = pvr2_cli_gotview_2, .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), .flag_has_cx25840 = !0, .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, }; /*------------------------------------------------------------------------*/ /* Terratec Grabster AV400 */ static const struct pvr2_device_client_desc pvr2_cli_av400[] = { { .module_id = PVR2_CLIENT_ID_CX25840 }, }; static const struct pvr2_device_desc pvr2_device_av400 = { .description = "Terratec Grabster AV400", .shortname = "av400", .flag_is_experimental = 1, .client_table.lst = pvr2_cli_av400, .client_table.cnt = ARRAY_SIZE(pvr2_cli_av400), .flag_has_cx25840 = !0, .flag_has_analogtuner = 0, .flag_has_composite = !0, .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400, }; /*------------------------------------------------------------------------*/ /* OnAir Creator */ #ifdef CONFIG_VIDEO_PVRUSB2_DVB static struct lgdt330x_config pvr2_lgdt3303_config = { .demod_chip = LGDT3303, .clock_polarity_flip = 1, }; static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap) { adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config, 0x0e, &adap->channel.hdw->i2c_adap); if (adap->fe) return 0; return -EIO; } static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap) { dvb_attach(simple_tuner_attach, adap->fe, &adap->channel.hdw->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); return 0; } static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = { .frontend_attach = pvr2_lgdt3303_attach, .tuner_attach = pvr2_lgh06xf_attach, }; #endif static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = { { .module_id = PVR2_CLIENT_ID_SAA7115 }, { .module_id = PVR2_CLIENT_ID_CS53L32A }, { .module_id = PVR2_CLIENT_ID_TUNER }, }; static const struct pvr2_device_desc pvr2_device_onair_creator = { .description = "OnAir Creator Hybrid USB tuner", .shortname = "oac", .client_table.lst = pvr2_cli_onair_creator, .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator), .default_tuner_type = TUNER_LG_TDVS_H06XF, .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .flag_digital_requires_cx23416 = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, .default_std_mask = V4L2_STD_NTSC_M, #ifdef CONFIG_VIDEO_PVRUSB2_DVB .dvb_props = &pvr2_onair_creator_fe_props, #endif }; /*------------------------------------------------------------------------*/ /* OnAir USB 2.0 */ #ifdef CONFIG_VIDEO_PVRUSB2_DVB static struct lgdt330x_config pvr2_lgdt3302_config = { .demod_chip = LGDT3302, }; static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap) { adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config, 0x0e, &adap->channel.hdw->i2c_adap); if (adap->fe) return 0; return -EIO; } static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap) { dvb_attach(simple_tuner_attach, adap->fe, &adap->channel.hdw->i2c_adap, 0x61, TUNER_PHILIPS_FCV1236D); return 0; } static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = { .frontend_attach = pvr2_lgdt3302_attach, .tuner_attach = pvr2_fcv1236d_attach, }; #endif static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = { { .module_id = PVR2_CLIENT_ID_SAA7115 }, { .module_id = PVR2_CLIENT_ID_CS53L32A }, { .module_id = PVR2_CLIENT_ID_TUNER }, }; static const struct pvr2_device_desc pvr2_device_onair_usb2 = { .description = "OnAir USB2 Hybrid USB tuner", .shortname = "oa2", .client_table.lst = pvr2_cli_onair_usb2, .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2), .default_tuner_type = TUNER_PHILIPS_FCV1236D, .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .flag_digital_requires_cx23416 = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, .default_std_mask = V4L2_STD_NTSC_M, #ifdef CONFIG_VIDEO_PVRUSB2_DVB .dvb_props = &pvr2_onair_usb2_fe_props, #endif }; /*------------------------------------------------------------------------*/ /* Hauppauge PVR-USB2 Model 73xxx */ #ifdef CONFIG_VIDEO_PVRUSB2_DVB static struct tda10048_config hauppauge_tda10048_config = { .demod_address = 0x10 >> 1, .output_mode = TDA10048_PARALLEL_OUTPUT, .fwbulkwritelen = TDA10048_BULKWRITE_50, .inversion = TDA10048_INVERSION_ON, .dtv6_if_freq_khz = TDA10048_IF_3300, .dtv7_if_freq_khz = TDA10048_IF_3800, .dtv8_if_freq_khz = TDA10048_IF_4300, .clk_freq_khz = TDA10048_CLK_16000, .disable_gate_access = 1, }; static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, .if_lvl = 1, .rfagc_top = 0x37, }, .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, .if_lvl = 1, .rfagc_top = 0x37, }, .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, .if_lvl = 1, .rfagc_top = 0x37, }, }; static struct tda18271_config hauppauge_tda18271_dvb_config = { .std_map = &hauppauge_tda18271_dvbt_std_map, .gate = TDA18271_GATE_ANALOG, .output_opt = TDA18271_OUTPUT_LT_OFF, }; static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) { adap->fe = dvb_attach(tda10048_attach, &hauppauge_tda10048_config, &adap->channel.hdw->i2c_adap); if (adap->fe) return 0; return -EIO; } static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) { dvb_attach(tda829x_attach, adap->fe, &adap->channel.hdw->i2c_adap, 0x42, &tda829x_no_probe); dvb_attach(tda18271_attach, adap->fe, 0x60, &adap->channel.hdw->i2c_adap, &hauppauge_tda18271_dvb_config); return 0; } static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = { .frontend_attach = pvr2_tda10048_attach, .tuner_attach = pvr2_73xxx_tda18271_8295_attach, }; #endif static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = { { .module_id = PVR2_CLIENT_ID_CX25840 }, { .module_id = PVR2_CLIENT_ID_TUNER, .i2c_address_list = "\x42"}, }; #define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw" static const char *pvr2_fw1_names_73xxx[] = { PVR2_FIRMWARE_73xxx, }; static const struct pvr2_device_desc pvr2_device_73xxx = { .description = "WinTV HVR-1900 Model 73xxx", .shortname = "73xxx", .client_table.lst = pvr2_cli_73xxx, .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), .fx2_firmware.lst = pvr2_fw1_names_73xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), .flag_has_cx25840 = !0, .flag_has_hauppauge_rom = !0, .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .flag_fx2_16kb = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, .ir_scheme = PVR2_IR_SCHEME_ZILOG, #ifdef CONFIG_VIDEO_PVRUSB2_DVB .dvb_props = &pvr2_73xxx_dvb_props, #endif }; /*------------------------------------------------------------------------*/ /* Hauppauge PVR-USB2 Model 75xxx */ #ifdef CONFIG_VIDEO_PVRUSB2_DVB static struct s5h1409_config pvr2_s5h1409_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_PARALLEL_OUTPUT, .gpio = S5H1409_GPIO_OFF, .qam_if = 4000, .inversion = S5H1409_INVERSION_ON, .status_mode = S5H1409_DEMODLOCKING, }; static struct s5h1411_config pvr2_s5h1411_config = { .output_mode = S5H1411_PARALLEL_OUTPUT, .gpio = S5H1411_GPIO_OFF, .vsb_if = S5H1411_IF_44000, .qam_if = S5H1411_IF_4000, .inversion = S5H1411_INVERSION_ON, .status_mode = S5H1411_DEMODLOCKING, }; static struct tda18271_std_map hauppauge_tda18271_std_map = { .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, .if_lvl = 6, .rfagc_top = 0x37, }, .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, .if_lvl = 6, .rfagc_top = 0x37, }, }; static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, .output_opt = TDA18271_OUTPUT_LT_OFF, }; static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) { adap->fe = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config, &adap->channel.hdw->i2c_adap); if (adap->fe) return 0; return -EIO; } static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap) { adap->fe = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config, &adap->channel.hdw->i2c_adap); if (adap->fe) return 0; return -EIO; } static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) { dvb_attach(tda829x_attach, adap->fe, &adap->channel.hdw->i2c_adap, 0x42, &tda829x_no_probe); dvb_attach(tda18271_attach, adap->fe, 0x60, &adap->channel.hdw->i2c_adap, &hauppauge_tda18271_config); return 0; } static const struct pvr2_dvb_props pvr2_750xx_dvb_props = { .frontend_attach = pvr2_s5h1409_attach, .tuner_attach = pvr2_tda18271_8295_attach, }; static const struct pvr2_dvb_props pvr2_751xx_dvb_props = { .frontend_attach = pvr2_s5h1411_attach, .tuner_attach = pvr2_tda18271_8295_attach, }; #endif #define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw" static const char *pvr2_fw1_names_75xxx[] = { PVR2_FIRMWARE_75xxx, }; static const struct pvr2_device_desc pvr2_device_750xx = { .description = "WinTV HVR-1950 Model 750xx", .shortname = "750xx", .client_table.lst = pvr2_cli_73xxx, .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), .fx2_firmware.lst = pvr2_fw1_names_75xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), .flag_has_cx25840 = !0, .flag_has_hauppauge_rom = !0, .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .flag_fx2_16kb = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, .default_std_mask = V4L2_STD_NTSC_M, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, .ir_scheme = PVR2_IR_SCHEME_ZILOG, #ifdef CONFIG_VIDEO_PVRUSB2_DVB .dvb_props = &pvr2_750xx_dvb_props, #endif }; static const struct pvr2_device_desc pvr2_device_751xx = { .description = "WinTV HVR-1950 Model 751xx", .shortname = "751xx", .client_table.lst = pvr2_cli_73xxx, .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), .fx2_firmware.lst = pvr2_fw1_names_75xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), .flag_has_cx25840 = !0, .flag_has_hauppauge_rom = !0, .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .flag_fx2_16kb = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, .default_std_mask = V4L2_STD_NTSC_M, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, .ir_scheme = PVR2_IR_SCHEME_ZILOG, #ifdef CONFIG_VIDEO_PVRUSB2_DVB .dvb_props = &pvr2_751xx_dvb_props, #endif }; /*------------------------------------------------------------------------*/ struct usb_device_id pvr2_device_table[] = { { USB_DEVICE(0x2040, 0x2900), .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */ .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, { USB_DEVICE(0x2040, 0x2400), .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, { USB_DEVICE(0x1164, 0x0622), .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, { USB_DEVICE(0x1164, 0x0602), .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d}, { USB_DEVICE(0x11ba, 0x1003), .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, { USB_DEVICE(0x11ba, 0x1001), .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, { USB_DEVICE(0x2040, 0x7300), .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, { USB_DEVICE(0x2040, 0x7500), .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, { USB_DEVICE(0x2040, 0x7501), .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, { USB_DEVICE(0x0ccd, 0x0039), .driver_info = (kernel_ulong_t)&pvr2_device_av400}, { } }; MODULE_DEVICE_TABLE(usb, pvr2_device_table); MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1