| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Christian Daudt | 1054 | 86.82% | 2 | 11.76% |
| Tim Kryger | 80 | 6.59% | 1 | 5.88% |
| Russell King | 20 | 1.65% | 4 | 23.53% |
| Kevin Hao | 19 | 1.57% | 2 | 11.76% |
| Jaehoon Chung | 13 | 1.07% | 1 | 5.88% |
| Wei Yongjun | 12 | 0.99% | 1 | 5.88% |
| Ulf Hansson | 11 | 0.91% | 2 | 11.76% |
| Julia Lawall | 2 | 0.16% | 1 | 5.88% |
| Javier Martinez Canillas | 1 | 0.08% | 1 | 5.88% |
| Sachin Kamat | 1 | 0.08% | 1 | 5.88% |
| Behan Webster | 1 | 0.08% | 1 | 5.88% |
| Total | 1214 | 17 |
/* * Copyright (C) 2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2. * * This program is distributed "as is" WITHOUT ANY WARRANTY of any * kind, whether express or implied; without even the implied warranty * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/highmem.h> #include <linux/platform_device.h> #include <linux/mmc/host.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/clk.h> #include <linux/regulator/consumer.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/mmc/slot-gpio.h> #include "sdhci-pltfm.h" #include "sdhci.h" #define SDHCI_SOFT_RESET 0x01000000 #define KONA_SDHOST_CORECTRL 0x8000 #define KONA_SDHOST_CD_PINCTRL 0x00000008 #define KONA_SDHOST_STOP_HCLK 0x00000004 #define KONA_SDHOST_RESET 0x00000002 #define KONA_SDHOST_EN 0x00000001 #define KONA_SDHOST_CORESTAT 0x8004 #define KONA_SDHOST_WP 0x00000002 #define KONA_SDHOST_CD_SW 0x00000001 #define KONA_SDHOST_COREIMR 0x8008 #define KONA_SDHOST_IP 0x00000001 #define KONA_SDHOST_COREISR 0x800C #define KONA_SDHOST_COREIMSR 0x8010 #define KONA_SDHOST_COREDBG1 0x8014 #define KONA_SDHOST_COREGPO_MASK 0x8018 #define SD_DETECT_GPIO_DEBOUNCE_128MS 128 #define KONA_MMC_AUTOSUSPEND_DELAY (50) struct sdhci_bcm_kona_dev { struct mutex write_lock; /* protect back to back writes */ }; static int sdhci_bcm_kona_sd_reset(struct sdhci_host *host) { unsigned int val; unsigned long timeout; /* This timeout should be sufficent for core to reset */ timeout = jiffies + msecs_to_jiffies(100); /* reset the host using the top level reset */ val = sdhci_readl(host, KONA_SDHOST_CORECTRL); val |= KONA_SDHOST_RESET; sdhci_writel(host, val, KONA_SDHOST_CORECTRL); while (!(sdhci_readl(host, KONA_SDHOST_CORECTRL) & KONA_SDHOST_RESET)) { if (time_is_before_jiffies(timeout)) { pr_err("Error: sd host is stuck in reset!!!\n"); return -EFAULT; } } /* bring the host out of reset */ val = sdhci_readl(host, KONA_SDHOST_CORECTRL); val &= ~KONA_SDHOST_RESET; /* * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) * Back-to-Back writes to same register needs delay when SD bus clock * is very low w.r.t AHB clock, mainly during boot-time and during card * insert-removal. */ usleep_range(1000, 5000); sdhci_writel(host, val, KONA_SDHOST_CORECTRL); return 0; } static void sdhci_bcm_kona_sd_init(struct sdhci_host *host) { unsigned int val; /* enable the interrupt from the IP core */ val = sdhci_readl(host, KONA_SDHOST_COREIMR); val |= KONA_SDHOST_IP; sdhci_writel(host, val, KONA_SDHOST_COREIMR); /* Enable the AHB clock gating module to the host */ val = sdhci_readl(host, KONA_SDHOST_CORECTRL); val |= KONA_SDHOST_EN; /* * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) * Back-to-Back writes to same register needs delay when SD bus clock * is very low w.r.t AHB clock, mainly during boot-time and during card * insert-removal. */ usleep_range(1000, 5000); sdhci_writel(host, val, KONA_SDHOST_CORECTRL); } /* * Software emulation of the SD card insertion/removal. Set insert=1 for insert * and insert=0 for removal. The card detection is done by GPIO. For Broadcom * IP to function properly the bit 0 of CORESTAT register needs to be set/reset * to generate the CD IRQ handled in sdhci.c which schedules card_tasklet. */ static int sdhci_bcm_kona_sd_card_emulate(struct sdhci_host *host, int insert) { struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv); u32 val; /* * Back-to-Back register write needs a delay of min 10uS. * Back-to-Back writes to same register needs delay when SD bus clock * is very low w.r.t AHB clock, mainly during boot-time and during card * insert-removal. * We keep 20uS */ mutex_lock(&kona_dev->write_lock); udelay(20); val = sdhci_readl(host, KONA_SDHOST_CORESTAT); if (insert) { int ret; ret = mmc_gpio_get_ro(host->mmc); if (ret >= 0) val = (val & ~KONA_SDHOST_WP) | ((ret) ? KONA_SDHOST_WP : 0); val |= KONA_SDHOST_CD_SW; sdhci_writel(host, val, KONA_SDHOST_CORESTAT); } else { val &= ~KONA_SDHOST_CD_SW; sdhci_writel(host, val, KONA_SDHOST_CORESTAT); } mutex_unlock(&kona_dev->write_lock); return 0; } /* * SD card interrupt event callback */ static void sdhci_bcm_kona_card_event(struct sdhci_host *host) { if (mmc_gpio_get_cd(host->mmc) > 0) { dev_dbg(mmc_dev(host->mmc), "card inserted\n"); sdhci_bcm_kona_sd_card_emulate(host, 1); } else { dev_dbg(mmc_dev(host->mmc), "card removed\n"); sdhci_bcm_kona_sd_card_emulate(host, 0); } } static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host, u8 power_mode) { /* * JEDEC and SD spec specify supplying 74 continuous clocks to * device after power up. With minimum bus (100KHz) that * that translates to 740us */ if (power_mode != MMC_POWER_OFF) udelay(740); } static const struct sdhci_ops sdhci_bcm_kona_ops = { .set_clock = sdhci_set_clock, .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, .platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .card_event = sdhci_bcm_kona_card_event, }; static const struct sdhci_pltfm_data sdhci_pltfm_data_kona = { .ops = &sdhci_bcm_kona_ops, .quirks = SDHCI_QUIRK_NO_CARD_NO_RESET | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_FORCE_BLK_SZ_2048 | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, }; static const struct of_device_id sdhci_bcm_kona_of_match[] = { { .compatible = "brcm,kona-sdhci"}, { .compatible = "bcm,kona-sdhci"}, /* deprecated name */ {} }; MODULE_DEVICE_TABLE(of, sdhci_bcm_kona_of_match); static int sdhci_bcm_kona_probe(struct platform_device *pdev) { struct sdhci_bcm_kona_dev *kona_dev = NULL; struct sdhci_pltfm_host *pltfm_priv; struct device *dev = &pdev->dev; struct sdhci_host *host; int ret; ret = 0; host = sdhci_pltfm_init(pdev, &sdhci_pltfm_data_kona, sizeof(*kona_dev)); if (IS_ERR(host)) return PTR_ERR(host); dev_dbg(dev, "%s: inited. IOADDR=%p\n", __func__, host->ioaddr); pltfm_priv = sdhci_priv(host); kona_dev = sdhci_pltfm_priv(pltfm_priv); mutex_init(&kona_dev->write_lock); ret = mmc_of_parse(host->mmc); if (ret) goto err_pltfm_free; if (!host->mmc->f_max) { dev_err(&pdev->dev, "Missing max-freq for SDHCI cfg\n"); ret = -ENXIO; goto err_pltfm_free; } /* Get and enable the core clock */ pltfm_priv->clk = devm_clk_get(dev, NULL); if (IS_ERR(pltfm_priv->clk)) { dev_err(dev, "Failed to get core clock\n"); ret = PTR_ERR(pltfm_priv->clk); goto err_pltfm_free; } ret = clk_set_rate(pltfm_priv->clk, host->mmc->f_max); if (ret) { dev_err(dev, "Failed to set rate core clock\n"); goto err_pltfm_free; } ret = clk_prepare_enable(pltfm_priv->clk); if (ret) { dev_err(dev, "Failed to enable core clock\n"); goto err_pltfm_free; } dev_dbg(dev, "non-removable=%c\n", mmc_card_is_removable(host->mmc) ? 'N' : 'Y'); dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n", (mmc_gpio_get_cd(host->mmc) != -ENOSYS) ? 'Y' : 'N', (mmc_gpio_get_ro(host->mmc) != -ENOSYS) ? 'Y' : 'N'); if (!mmc_card_is_removable(host->mmc)) host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; dev_dbg(dev, "is_8bit=%c\n", (host->mmc->caps & MMC_CAP_8_BIT_DATA) ? 'Y' : 'N'); ret = sdhci_bcm_kona_sd_reset(host); if (ret) goto err_clk_disable; sdhci_bcm_kona_sd_init(host); ret = sdhci_add_host(host); if (ret) goto err_reset; /* if device is eMMC, emulate card insert right here */ if (!mmc_card_is_removable(host->mmc)) { ret = sdhci_bcm_kona_sd_card_emulate(host, 1); if (ret) { dev_err(dev, "unable to emulate card insertion\n"); goto err_remove_host; } } /* * Since the card detection GPIO interrupt is configured to be * edge sensitive, check the initial GPIO value here, emulate * only if the card is present */ if (mmc_gpio_get_cd(host->mmc) > 0) sdhci_bcm_kona_sd_card_emulate(host, 1); dev_dbg(dev, "initialized properly\n"); return 0; err_remove_host: sdhci_remove_host(host, 0); err_reset: sdhci_bcm_kona_sd_reset(host); err_clk_disable: clk_disable_unprepare(pltfm_priv->clk); err_pltfm_free: sdhci_pltfm_free(pdev); dev_err(dev, "Probing of sdhci-pltfm failed: %d\n", ret); return ret; } static struct platform_driver sdhci_bcm_kona_driver = { .driver = { .name = "sdhci-kona", .pm = &sdhci_pltfm_pmops, .of_match_table = sdhci_bcm_kona_of_match, }, .probe = sdhci_bcm_kona_probe, .remove = sdhci_pltfm_unregister, }; module_platform_driver(sdhci_bcm_kona_driver); MODULE_DESCRIPTION("SDHCI driver for Broadcom Kona platform"); MODULE_AUTHOR("Broadcom"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1