Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Joachim Eastwood | 2003 | 95.79% | 1 | 11.11% |
Brian Norris | 41 | 1.96% | 4 | 44.44% |
Cyrille Pitchen | 30 | 1.43% | 1 | 11.11% |
Michal Suchanek | 6 | 0.29% | 1 | 11.11% |
Marek Vašut | 6 | 0.29% | 1 | 11.11% |
Alexey Khoroshilov | 5 | 0.24% | 1 | 11.11% |
Total | 2091 | 9 |
/* * SPI-NOR driver for NXP SPI Flash Interface (SPIFI) * * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> * * Based on Freescale QuadSPI driver: * Copyright (C) 2013 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/module.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/spi-nor.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> /* NXP SPIFI registers, bits and macros */ #define SPIFI_CTRL 0x000 #define SPIFI_CTRL_TIMEOUT(timeout) (timeout) #define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16) #define SPIFI_CTRL_MODE3 BIT(23) #define SPIFI_CTRL_DUAL BIT(28) #define SPIFI_CTRL_FBCLK BIT(30) #define SPIFI_CMD 0x004 #define SPIFI_CMD_DATALEN(dlen) ((dlen) & 0x3fff) #define SPIFI_CMD_DOUT BIT(15) #define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16) #define SPIFI_CMD_FIELDFORM(field) ((field) << 19) #define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0) #define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1) #define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21) #define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1) #define SPIFI_CMD_OPCODE(op) ((op) << 24) #define SPIFI_ADDR 0x008 #define SPIFI_IDATA 0x00c #define SPIFI_CLIMIT 0x010 #define SPIFI_DATA 0x014 #define SPIFI_MCMD 0x018 #define SPIFI_STAT 0x01c #define SPIFI_STAT_MCINIT BIT(0) #define SPIFI_STAT_CMD BIT(1) #define SPIFI_STAT_RESET BIT(4) #define SPI_NOR_MAX_ID_LEN 6 struct nxp_spifi { struct device *dev; struct clk *clk_spifi; struct clk *clk_reg; void __iomem *io_base; void __iomem *flash_base; struct spi_nor nor; bool memory_mode; u32 mcmd; }; static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi) { u8 stat; int ret; ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, !(stat & SPIFI_STAT_CMD), 10, 30); if (ret) dev_warn(spifi->dev, "command timed out\n"); return ret; } static int nxp_spifi_reset(struct nxp_spifi *spifi) { u8 stat; int ret; writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT); ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, !(stat & SPIFI_STAT_RESET), 10, 30); if (ret) dev_warn(spifi->dev, "state reset timed out\n"); return ret; } static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi) { int ret; if (!spifi->memory_mode) return 0; ret = nxp_spifi_reset(spifi); if (ret) dev_err(spifi->dev, "unable to enter command mode\n"); else spifi->memory_mode = false; return ret; } static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi) { u8 stat; int ret; if (spifi->memory_mode) return 0; writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD); ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, stat & SPIFI_STAT_MCINIT, 10, 30); if (ret) dev_err(spifi->dev, "unable to enter memory mode\n"); else spifi->memory_mode = true; return ret; } static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct nxp_spifi *spifi = nor->priv; u32 cmd; int ret; ret = nxp_spifi_set_memory_mode_off(spifi); if (ret) return ret; cmd = SPIFI_CMD_DATALEN(len) | SPIFI_CMD_OPCODE(opcode) | SPIFI_CMD_FIELDFORM_ALL_SERIAL | SPIFI_CMD_FRAMEFORM_OPCODE_ONLY; writel(cmd, spifi->io_base + SPIFI_CMD); while (len--) *buf++ = readb(spifi->io_base + SPIFI_DATA); return nxp_spifi_wait_for_cmd(spifi); } static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct nxp_spifi *spifi = nor->priv; u32 cmd; int ret; ret = nxp_spifi_set_memory_mode_off(spifi); if (ret) return ret; cmd = SPIFI_CMD_DOUT | SPIFI_CMD_DATALEN(len) | SPIFI_CMD_OPCODE(opcode) | SPIFI_CMD_FIELDFORM_ALL_SERIAL | SPIFI_CMD_FRAMEFORM_OPCODE_ONLY; writel(cmd, spifi->io_base + SPIFI_CMD); while (len--) writeb(*buf++, spifi->io_base + SPIFI_DATA); return nxp_spifi_wait_for_cmd(spifi); } static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { struct nxp_spifi *spifi = nor->priv; int ret; ret = nxp_spifi_set_memory_mode_on(spifi); if (ret) return ret; memcpy_fromio(buf, spifi->flash_base + from, len); return len; } static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len, const u_char *buf) { struct nxp_spifi *spifi = nor->priv; u32 cmd; int ret; size_t i; ret = nxp_spifi_set_memory_mode_off(spifi); if (ret) return ret; writel(to, spifi->io_base + SPIFI_ADDR); cmd = SPIFI_CMD_DOUT | SPIFI_CMD_DATALEN(len) | SPIFI_CMD_FIELDFORM_ALL_SERIAL | SPIFI_CMD_OPCODE(nor->program_opcode) | SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); writel(cmd, spifi->io_base + SPIFI_CMD); for (i = 0; i < len; i++) writeb(buf[i], spifi->io_base + SPIFI_DATA); ret = nxp_spifi_wait_for_cmd(spifi); if (ret) return ret; return len; } static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs) { struct nxp_spifi *spifi = nor->priv; u32 cmd; int ret; ret = nxp_spifi_set_memory_mode_off(spifi); if (ret) return ret; writel(offs, spifi->io_base + SPIFI_ADDR); cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL | SPIFI_CMD_OPCODE(nor->erase_opcode) | SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); writel(cmd, spifi->io_base + SPIFI_CMD); return nxp_spifi_wait_for_cmd(spifi); } static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi) { switch (spifi->nor.read_proto) { case SNOR_PROTO_1_1_1: spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL; break; case SNOR_PROTO_1_1_2: case SNOR_PROTO_1_1_4: spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA; break; default: dev_err(spifi->dev, "unsupported SPI read mode\n"); return -EINVAL; } /* Memory mode supports address length between 1 and 4 */ if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4) return -EINVAL; spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) | SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) | SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); return 0; } static void nxp_spifi_dummy_id_read(struct spi_nor *nor) { u8 id[SPI_NOR_MAX_ID_LEN]; nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); } static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, struct device_node *np) { struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_READ | SNOR_HWCAPS_READ_FAST | SNOR_HWCAPS_PP, }; u32 ctrl, property; u16 mode = 0; int ret; if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) { switch (property) { case 1: break; case 2: mode |= SPI_RX_DUAL; break; case 4: mode |= SPI_RX_QUAD; break; default: dev_err(spifi->dev, "unsupported rx-bus-width\n"); return -EINVAL; } } if (of_find_property(np, "spi-cpha", NULL)) mode |= SPI_CPHA; if (of_find_property(np, "spi-cpol", NULL)) mode |= SPI_CPOL; /* Setup control register defaults */ ctrl = SPIFI_CTRL_TIMEOUT(1000) | SPIFI_CTRL_CSHIGH(15) | SPIFI_CTRL_FBCLK; if (mode & SPI_RX_DUAL) { ctrl |= SPIFI_CTRL_DUAL; hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; } else if (mode & SPI_RX_QUAD) { ctrl &= ~SPIFI_CTRL_DUAL; hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; } else { ctrl |= SPIFI_CTRL_DUAL; } switch (mode & (SPI_CPHA | SPI_CPOL)) { case SPI_MODE_0: ctrl &= ~SPIFI_CTRL_MODE3; break; case SPI_MODE_3: ctrl |= SPIFI_CTRL_MODE3; break; default: dev_err(spifi->dev, "only mode 0 and 3 supported\n"); return -EINVAL; } writel(ctrl, spifi->io_base + SPIFI_CTRL); spifi->nor.dev = spifi->dev; spi_nor_set_flash_node(&spifi->nor, np); spifi->nor.priv = spifi; spifi->nor.read = nxp_spifi_read; spifi->nor.write = nxp_spifi_write; spifi->nor.erase = nxp_spifi_erase; spifi->nor.read_reg = nxp_spifi_read_reg; spifi->nor.write_reg = nxp_spifi_write_reg; /* * The first read on a hard reset isn't reliable so do a * dummy read of the id before calling spi_nor_scan(). * The reason for this problem is unknown. * * The official NXP spifilib uses more or less the same * workaround that is applied here by reading the device * id multiple times. */ nxp_spifi_dummy_id_read(&spifi->nor); ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps); if (ret) { dev_err(spifi->dev, "device scan failed\n"); return ret; } ret = nxp_spifi_setup_memory_cmd(spifi); if (ret) { dev_err(spifi->dev, "memory command setup failed\n"); return ret; } ret = mtd_device_register(&spifi->nor.mtd, NULL, 0); if (ret) { dev_err(spifi->dev, "mtd device parse failed\n"); return ret; } return 0; } static int nxp_spifi_probe(struct platform_device *pdev) { struct device_node *flash_np; struct nxp_spifi *spifi; struct resource *res; int ret; spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL); if (!spifi) return -ENOMEM; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi"); spifi->io_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(spifi->io_base)) return PTR_ERR(spifi->io_base); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash"); spifi->flash_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(spifi->flash_base)) return PTR_ERR(spifi->flash_base); spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi"); if (IS_ERR(spifi->clk_spifi)) { dev_err(&pdev->dev, "spifi clock not found\n"); return PTR_ERR(spifi->clk_spifi); } spifi->clk_reg = devm_clk_get(&pdev->dev, "reg"); if (IS_ERR(spifi->clk_reg)) { dev_err(&pdev->dev, "reg clock not found\n"); return PTR_ERR(spifi->clk_reg); } ret = clk_prepare_enable(spifi->clk_reg); if (ret) { dev_err(&pdev->dev, "unable to enable reg clock\n"); return ret; } ret = clk_prepare_enable(spifi->clk_spifi); if (ret) { dev_err(&pdev->dev, "unable to enable spifi clock\n"); goto dis_clk_reg; } spifi->dev = &pdev->dev; platform_set_drvdata(pdev, spifi); /* Initialize and reset device */ nxp_spifi_reset(spifi); writel(0, spifi->io_base + SPIFI_IDATA); writel(0, spifi->io_base + SPIFI_MCMD); nxp_spifi_reset(spifi); flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); if (!flash_np) { dev_err(&pdev->dev, "no SPI flash device to configure\n"); ret = -ENODEV; goto dis_clks; } ret = nxp_spifi_setup_flash(spifi, flash_np); of_node_put(flash_np); if (ret) { dev_err(&pdev->dev, "unable to setup flash chip\n"); goto dis_clks; } return 0; dis_clks: clk_disable_unprepare(spifi->clk_spifi); dis_clk_reg: clk_disable_unprepare(spifi->clk_reg); return ret; } static int nxp_spifi_remove(struct platform_device *pdev) { struct nxp_spifi *spifi = platform_get_drvdata(pdev); mtd_device_unregister(&spifi->nor.mtd); clk_disable_unprepare(spifi->clk_spifi); clk_disable_unprepare(spifi->clk_reg); return 0; } static const struct of_device_id nxp_spifi_match[] = { {.compatible = "nxp,lpc1773-spifi"}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, nxp_spifi_match); static struct platform_driver nxp_spifi_driver = { .probe = nxp_spifi_probe, .remove = nxp_spifi_remove, .driver = { .name = "nxp-spifi", .of_match_table = nxp_spifi_match, }, }; module_platform_driver(nxp_spifi_driver); MODULE_DESCRIPTION("NXP SPI Flash Interface driver"); MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1