Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jeff Garzik | 1378 | 91.14% | 2 | 9.09% |
Hauke Mehrtens | 24 | 1.59% | 5 | 22.73% |
Pavel Machek | 21 | 1.39% | 1 | 4.55% |
Gary Zambrano | 20 | 1.32% | 2 | 9.09% |
Michael Buesch | 18 | 1.19% | 1 | 4.55% |
François Romieu | 16 | 1.06% | 1 | 4.55% |
John W. Linville | 8 | 0.53% | 1 | 4.55% |
Florian Fainelli | 6 | 0.40% | 1 | 4.55% |
Al Viro | 5 | 0.33% | 1 | 4.55% |
Kevin Groeneveld | 5 | 0.33% | 1 | 4.55% |
Stephen Hemminger | 4 | 0.26% | 1 | 4.55% |
Eric Dumazet | 3 | 0.20% | 1 | 4.55% |
Michael Hayes | 1 | 0.07% | 1 | 4.55% |
Thadeu Lima de Souza Cascardo | 1 | 0.07% | 1 | 4.55% |
Greg Kroah-Hartman | 1 | 0.07% | 1 | 4.55% |
Pekka Pietikäinen | 1 | 0.07% | 1 | 4.55% |
Total | 1512 | 22 |
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _B44_H #define _B44_H #include <linux/brcmphy.h> /* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */ #define B44_DEVCTRL 0x0000UL /* Device Control */ #define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */ #define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */ #define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */ #define DEVCTRL_EPR 0x00008000 /* EPHY Reset */ #define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */ #define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */ #define DEVCTRL_PADDR 0x0007c000 /* PHY Address */ #define DEVCTRL_PADDR_SHIFT 18 #define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */ #define B44_WKUP_LEN 0x0010UL /* Wakeup Length */ #define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */ #define WKUP_LEN_D0 0x00000080 #define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */ #define WKUP_LEN_P1_SHIFT 8 #define WKUP_LEN_D1 0x00008000 #define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */ #define WKUP_LEN_P2_SHIFT 16 #define WKUP_LEN_D2 0x00000000 #define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */ #define WKUP_LEN_P3_SHIFT 24 #define WKUP_LEN_D3 0x80000000 #define WKUP_LEN_DISABLE 0x80808080 #define WKUP_LEN_ENABLE_TWO 0x80800000 #define WKUP_LEN_ENABLE_THREE 0x80000000 #define B44_ISTAT 0x0020UL /* Interrupt Status */ #define ISTAT_LS 0x00000020 /* Link Change (B0 only) */ #define ISTAT_PME 0x00000040 /* Power Management Event */ #define ISTAT_TO 0x00000080 /* General Purpose Timeout */ #define ISTAT_DSCE 0x00000400 /* Descriptor Error */ #define ISTAT_DATAE 0x00000800 /* Data Error */ #define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */ #define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */ #define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */ #define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */ #define ISTAT_RX 0x00010000 /* RX Interrupt */ #define ISTAT_TX 0x01000000 /* TX Interrupt */ #define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */ #define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */ #define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */ #define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU) #define B44_IMASK 0x0024UL /* Interrupt Mask */ #define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX) #define B44_GPTIMER 0x0028UL /* General Purpose Timer */ #define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */ #define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */ #define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */ #define B44_FILT_DATA 0x0094UL /* ENET Filter Data */ #define B44_TXBURST 0x00A0UL /* TX Max Burst Length */ #define B44_RXBURST 0x00A4UL /* RX Max Burst Length */ #define B44_MAC_CTRL 0x00A8UL /* MAC Control */ #define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */ #define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */ #define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */ #define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */ #define MAC_CTRL_PHY_LEDCTRL_SHIFT 5 #define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */ #define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */ #define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */ #define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */ #define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */ #define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */ #define RCV_LAZY_FC_SHIFT 24 #define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */ #define DMATX_CTRL_ENABLE 0x00000001 /* Enable */ #define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */ #define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */ #define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */ #define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */ #define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */ #define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */ #define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */ #define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ #define DMATX_STAT_SMASK 0x0000f000 /* State Mask */ #define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */ #define DMATX_STAT_SACTIVE 0x00001000 /* State Active */ #define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */ #define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */ #define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */ #define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */ #define DMATX_STAT_ENONE 0x00000000 /* Error None */ #define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ #define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */ #define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */ #define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ #define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */ #define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */ #define DMARX_CTRL_ENABLE 0x00000001 /* Enable */ #define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */ #define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */ #define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */ #define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */ #define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */ #define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ #define DMARX_STAT_SMASK 0x0000f000 /* State Mask */ #define DMARX_STAT_SDISABLED 0x00000000 /* State Disabled */ #define DMARX_STAT_SACTIVE 0x00001000 /* State Active */ #define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */ #define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */ #define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */ #define DMARX_STAT_ENONE 0x00000000 /* Error None */ #define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ #define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */ #define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */ #define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ #define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */ #define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */ #define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */ #define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */ #define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */ #define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */ #define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */ #define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */ #define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */ #define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */ #define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */ #define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */ #define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */ #define B44_RXCONFIG 0x0400UL /* EMAC RX Config */ #define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */ #define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */ #define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */ #define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */ #define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */ #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ #define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */ #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ #define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */ #define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */ #define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */ #define MDIO_DATA_DATA 0x0000ffff /* R/W Data */ #define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */ #define MDIO_DATA_TA_SHIFT 16 #define MDIO_TA_VALID 2 #define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */ #define MDIO_DATA_RA_SHIFT 18 #define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */ #define MDIO_DATA_PMD_SHIFT 23 #define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */ #define MDIO_DATA_OP_SHIFT 28 #define MDIO_OP_WRITE 1 #define MDIO_OP_READ 2 #define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */ #define MDIO_DATA_SB_SHIFT 30 #define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */ #define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */ #define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */ #define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */ #define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */ #define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */ #define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */ #define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */ #define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */ #define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */ #define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */ #define CAM_CTRL_MSEL 0x00000002 /* Mask Select */ #define CAM_CTRL_READ 0x00000004 /* Read */ #define CAM_CTRL_WRITE 0x00000008 /* Read */ #define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */ #define CAM_CTRL_INDEX_SHIFT 16 #define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */ #define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */ #define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */ #define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */ #define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */ #define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */ #define B44_TX_CTRL 0x0430UL /* EMAC TX Control */ #define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */ #define TX_CTRL_FMODE 0x00000002 /* Flow Mode */ #define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */ #define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */ #define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */ #define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */ #define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */ #define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */ #define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */ #define B44_TX_O 0x0508UL /* MIB TX Octets */ #define B44_TX_P 0x050CUL /* MIB TX Packets */ #define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */ #define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */ #define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */ #define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */ #define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */ #define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */ #define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */ #define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */ #define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */ #define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */ #define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */ #define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */ #define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */ #define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */ #define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */ #define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */ #define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */ #define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */ #define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */ #define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */ #define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */ #define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */ #define B44_RX_O 0x0588UL /* MIB RX Octets */ #define B44_RX_P 0x058CUL /* MIB RX Packets */ #define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */ #define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */ #define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */ #define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */ #define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */ #define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */ #define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */ #define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */ #define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */ #define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */ #define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */ #define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */ #define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */ #define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */ #define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */ #define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */ #define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */ #define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ #define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ /* 4400 PHY registers */ #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ #define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ #define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */ #define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */ #define B44_MII_ALEDCTRL 26 /* Activity LED */ #define MII_ALEDCTRL_ALLMSK 0x7fff #define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */ #define MII_TLEDCTRL_ENABLE 0x0040 struct dma_desc { __le32 ctrl; __le32 addr; }; /* There are only 12 bits in the DMA engine for descriptor offsetting * so the table must be aligned on a boundary of this. */ #define DMA_TABLE_BYTES 4096 #define DESC_CTRL_LEN 0x00001fff #define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */ #define DESC_CTRL_EOT 0x10000000 /* End of Table */ #define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */ #define DESC_CTRL_EOF 0x40000000 /* End of Frame */ #define DESC_CTRL_SOF 0x80000000 /* Start of Frame */ #define RX_COPY_THRESHOLD 256 struct rx_header { __le16 len; __le16 flags; __le16 pad[12]; }; #define RX_HEADER_LEN 28 #define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */ #define RX_FLAG_CRCERR 0x00000002 /* CRC Error */ #define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */ #define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */ #define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */ #define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */ #define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */ #define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */ #define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */ #define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO) struct ring_info { struct sk_buff *skb; dma_addr_t mapping; }; #define B44_MCAST_TABLE_SIZE 32 /* no local phy regs, e.g: Broadcom switches pseudo-PHY */ #define B44_PHY_ADDR_NO_LOCAL_PHY BRCM_PSEUDO_PHY_ADDR /* no phy present at all */ #define B44_PHY_ADDR_NO_PHY 31 #define B44_MDC_RATIO 5000000 #define B44_STAT_REG_DECLARE \ _B44(tx_good_octets) \ _B44(tx_good_pkts) \ _B44(tx_octets) \ _B44(tx_pkts) \ _B44(tx_broadcast_pkts) \ _B44(tx_multicast_pkts) \ _B44(tx_len_64) \ _B44(tx_len_65_to_127) \ _B44(tx_len_128_to_255) \ _B44(tx_len_256_to_511) \ _B44(tx_len_512_to_1023) \ _B44(tx_len_1024_to_max) \ _B44(tx_jabber_pkts) \ _B44(tx_oversize_pkts) \ _B44(tx_fragment_pkts) \ _B44(tx_underruns) \ _B44(tx_total_cols) \ _B44(tx_single_cols) \ _B44(tx_multiple_cols) \ _B44(tx_excessive_cols) \ _B44(tx_late_cols) \ _B44(tx_defered) \ _B44(tx_carrier_lost) \ _B44(tx_pause_pkts) \ _B44(rx_good_octets) \ _B44(rx_good_pkts) \ _B44(rx_octets) \ _B44(rx_pkts) \ _B44(rx_broadcast_pkts) \ _B44(rx_multicast_pkts) \ _B44(rx_len_64) \ _B44(rx_len_65_to_127) \ _B44(rx_len_128_to_255) \ _B44(rx_len_256_to_511) \ _B44(rx_len_512_to_1023) \ _B44(rx_len_1024_to_max) \ _B44(rx_jabber_pkts) \ _B44(rx_oversize_pkts) \ _B44(rx_fragment_pkts) \ _B44(rx_missed_pkts) \ _B44(rx_crc_align_errs) \ _B44(rx_undersize) \ _B44(rx_crc_errs) \ _B44(rx_align_errs) \ _B44(rx_symbol_errs) \ _B44(rx_pause_pkts) \ _B44(rx_nonpause_pkts) /* SW copy of device statistics, kept up to date by periodic timer * which probes HW values. Check b44_stats_update if you mess with * the layout */ struct b44_hw_stats { #define _B44(x) u64 x; B44_STAT_REG_DECLARE #undef _B44 struct u64_stats_sync syncp; }; #define B44_BOARDFLAG_ROBO 0x0010 /* Board has robo switch */ #define B44_BOARDFLAG_ADM 0x0080 /* Board has ADMtek switch */ struct ssb_device; struct b44 { spinlock_t lock; u32 imask, istat; struct dma_desc *rx_ring, *tx_ring; u32 tx_prod, tx_cons; u32 rx_prod, rx_cons; struct ring_info *rx_buffers; struct ring_info *tx_buffers; struct napi_struct napi; u32 dma_offset; u32 flags; #define B44_FLAG_B0_ANDLATER 0x00000001 #define B44_FLAG_BUGGY_TXPTR 0x00000002 #define B44_FLAG_REORDER_BUG 0x00000004 #define B44_FLAG_PAUSE_AUTO 0x00008000 #define B44_FLAG_FULL_DUPLEX 0x00010000 #define B44_FLAG_100_BASE_T 0x00020000 #define B44_FLAG_TX_PAUSE 0x00040000 #define B44_FLAG_RX_PAUSE 0x00080000 #define B44_FLAG_FORCE_LINK 0x00100000 #define B44_FLAG_ADV_10HALF 0x01000000 #define B44_FLAG_ADV_10FULL 0x02000000 #define B44_FLAG_ADV_100HALF 0x04000000 #define B44_FLAG_ADV_100FULL 0x08000000 #define B44_FLAG_EXTERNAL_PHY 0x10000000 #define B44_FLAG_RX_RING_HACK 0x20000000 #define B44_FLAG_TX_RING_HACK 0x40000000 #define B44_FLAG_WOL_ENABLE 0x80000000 u32 msg_enable; struct timer_list timer; struct b44_hw_stats hw_stats; struct ssb_device *sdev; struct net_device *dev; dma_addr_t rx_ring_dma, tx_ring_dma; u32 rx_pending; u32 tx_pending; u8 phy_addr; u8 force_copybreak; struct mii_bus *mii_bus; int old_link; struct mii_if_info mii_if; }; #endif /* _B44_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1