| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| David Gibson | 746 | 71.05% | 1 | 5.26% |
| Grant Erickson | 214 | 20.38% | 1 | 5.26% |
| Duc Dang | 14 | 1.33% | 1 | 5.26% |
| Valentine Barshak | 13 | 1.24% | 2 | 10.53% |
| Christian Lamparter | 11 | 1.05% | 1 | 5.26% |
| Victor Gallardo | 11 | 1.05% | 1 | 5.26% |
| Tony Breeds | 8 | 0.76% | 1 | 5.26% |
| Grant C. Likely | 6 | 0.57% | 1 | 5.26% |
| Josh Boyer | 6 | 0.57% | 1 | 5.26% |
| Benjamin Herrenschmidt | 6 | 0.57% | 2 | 10.53% |
| Kees Cook | 5 | 0.48% | 1 | 5.26% |
| Ivan Mikhaylov | 4 | 0.38% | 2 | 10.53% |
| Tejun Heo | 3 | 0.29% | 1 | 5.26% |
| Stephen Rothwell | 1 | 0.10% | 1 | 5.26% |
| Andrzej Hajda | 1 | 0.10% | 1 | 5.26% |
| Paul Gortmaker | 1 | 0.10% | 1 | 5.26% |
| Total | 1050 | 19 |
/* * drivers/net/ethernet/ibm/emac/core.h * * Driver for PowerPC 4xx on-chip ethernet controller. * * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. * <benh@kernel.crashing.org> * * Based on the arch/ppc version of the driver: * * Copyright (c) 2004, 2005 Zultys Technologies. * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * * Based on original work by * Armin Kuster <akuster@mvista.com> * Johnnie Peters <jpeters@mvista.com> * Copyright 2000, 2001 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #ifndef __IBM_NEWEMAC_CORE_H #define __IBM_NEWEMAC_CORE_H #include <linux/module.h> #include <linux/list.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/netdevice.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> #include <linux/of_platform.h> #include <linux/slab.h> #include <asm/io.h> #include <asm/dcr.h> #include "emac.h" #include "phy.h" #include "zmii.h" #include "rgmii.h" #include "mal.h" #include "tah.h" #include "debug.h" #define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB #define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB /* Simple sanity check */ #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 #error Invalid number of buffer descriptors (greater than 256) #endif #define EMAC_MIN_MTU 46 /* Maximum L2 header length (VLAN tagged, no FCS) */ #define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) /* RX BD size for the given MTU */ static inline int emac_rx_size(int mtu) { if (mtu > ETH_DATA_LEN) return MAL_MAX_RX_SIZE; else return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); } #define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) #define EMAC_RX_SKB_HEADROOM \ EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) /* Size of RX skb for the given MTU */ static inline int emac_rx_skb_size(int mtu) { int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; } /* RX DMA sync size */ static inline int emac_rx_sync_size(int mtu) { return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); } /* Driver statistcs is split into two parts to make it more cache friendly: * - normal statistics (packet count, etc) * - error statistics * * When statistics is requested by ethtool, these parts are concatenated, * normal one goes first. * * Please, keep these structures in sync with emac_stats_keys. */ /* Normal TX/RX Statistics */ struct emac_stats { u64 rx_packets; u64 rx_bytes; u64 tx_packets; u64 tx_bytes; u64 rx_packets_csum; u64 tx_packets_csum; }; /* Error statistics */ struct emac_error_stats { u64 tx_undo; /* Software RX Errors */ u64 rx_dropped_stack; u64 rx_dropped_oom; u64 rx_dropped_error; u64 rx_dropped_resize; u64 rx_dropped_mtu; u64 rx_stopped; /* BD reported RX errors */ u64 rx_bd_errors; u64 rx_bd_overrun; u64 rx_bd_bad_packet; u64 rx_bd_runt_packet; u64 rx_bd_short_event; u64 rx_bd_alignment_error; u64 rx_bd_bad_fcs; u64 rx_bd_packet_too_long; u64 rx_bd_out_of_range; u64 rx_bd_in_range; /* EMAC IRQ reported RX errors */ u64 rx_parity; u64 rx_fifo_overrun; u64 rx_overrun; u64 rx_bad_packet; u64 rx_runt_packet; u64 rx_short_event; u64 rx_alignment_error; u64 rx_bad_fcs; u64 rx_packet_too_long; u64 rx_out_of_range; u64 rx_in_range; /* Software TX Errors */ u64 tx_dropped; /* BD reported TX errors */ u64 tx_bd_errors; u64 tx_bd_bad_fcs; u64 tx_bd_carrier_loss; u64 tx_bd_excessive_deferral; u64 tx_bd_excessive_collisions; u64 tx_bd_late_collision; u64 tx_bd_multple_collisions; u64 tx_bd_single_collision; u64 tx_bd_underrun; u64 tx_bd_sqe; /* EMAC IRQ reported TX errors */ u64 tx_parity; u64 tx_underrun; u64 tx_sqe; u64 tx_errors; }; #define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct emac_stats) + \ sizeof(struct emac_error_stats)) \ / sizeof(u64)) struct emac_instance { struct net_device *ndev; struct emac_regs __iomem *emacp; struct platform_device *ofdev; struct device_node **blist; /* bootlist entry */ /* MAL linkage */ u32 mal_ph; struct platform_device *mal_dev; u32 mal_rx_chan; u32 mal_tx_chan; struct mal_instance *mal; struct mal_commac commac; /* PHY infos */ int phy_mode; u32 phy_map; u32 phy_address; u32 phy_feat_exc; struct mii_phy phy; struct mutex link_lock; struct delayed_work link_work; int link_polling; /* GPCS PHY infos */ u32 gpcs_address; /* Shared MDIO if any */ u32 mdio_ph; struct platform_device *mdio_dev; struct emac_instance *mdio_instance; struct mutex mdio_lock; /* Device-tree based phy configuration */ struct mii_bus *mii_bus; struct phy_device *phy_dev; /* ZMII infos if any */ u32 zmii_ph; u32 zmii_port; struct platform_device *zmii_dev; /* RGMII infos if any */ u32 rgmii_ph; u32 rgmii_port; struct platform_device *rgmii_dev; /* TAH infos if any */ u32 tah_ph; u32 tah_port; struct platform_device *tah_dev; /* IRQs */ int wol_irq; int emac_irq; /* OPB bus frequency in Mhz */ u32 opb_bus_freq; /* Cell index within an ASIC (for clk mgmnt) */ u32 cell_index; /* Max supported MTU */ u32 max_mtu; /* Feature bits (from probe table) */ unsigned int features; /* Tx and Rx fifo sizes & other infos in bytes */ u32 tx_fifo_size; u32 tx_fifo_size_gige; u32 rx_fifo_size; u32 rx_fifo_size_gige; u32 fifo_entry_size; u32 mal_burst_size; /* move to MAL ? */ /* IAHT and GAHT filter parameterization */ u32 xaht_slots_shift; u32 xaht_width_shift; /* Descriptor management */ struct mal_descriptor *tx_desc; int tx_cnt; int tx_slot; int ack_slot; struct mal_descriptor *rx_desc; int rx_slot; struct sk_buff *rx_sg_skb; /* 1 */ int rx_skb_size; int rx_sync_size; struct sk_buff *tx_skb[NUM_TX_BUFF]; struct sk_buff *rx_skb[NUM_RX_BUFF]; /* Stats */ struct emac_error_stats estats; struct emac_stats stats; /* Misc */ int reset_failed; int stop_timeout; /* in us */ int no_mcast; int mcast_pending; int opened; struct work_struct reset_work; spinlock_t lock; }; /* * Features of various EMAC implementations */ /* * No flow control on 40x according to the original driver */ #define EMAC_FTR_NO_FLOW_CONTROL_40x 0x00000001 /* * Cell is an EMAC4 */ #define EMAC_FTR_EMAC4 0x00000002 /* * For the 440SPe, AMCC inexplicably changed the polarity of * the "operation complete" bit in the MII control register. */ #define EMAC_FTR_STACR_OC_INVERT 0x00000004 /* * Set if we have a TAH. */ #define EMAC_FTR_HAS_TAH 0x00000008 /* * Set if we have a ZMII. */ #define EMAC_FTR_HAS_ZMII 0x00000010 /* * Set if we have a RGMII. */ #define EMAC_FTR_HAS_RGMII 0x00000020 /* * Set if we have new type STACR with STAOPC */ #define EMAC_FTR_HAS_NEW_STACR 0x00000040 /* * Set if we need phy clock workaround for 440gx */ #define EMAC_FTR_440GX_PHY_CLK_FIX 0x00000080 /* * Set if we need phy clock workaround for 440ep or 440gr */ #define EMAC_FTR_440EP_PHY_CLK_FIX 0x00000100 /* * The 405EX and 460EX contain the EMAC4SYNC core */ #define EMAC_FTR_EMAC4SYNC 0x00000200 /* * Set if we need phy clock workaround for 460ex or 460gt */ #define EMAC_FTR_460EX_PHY_CLK_FIX 0x00000400 /* * APM821xx requires Jumbo frame size set explicitly */ #define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE 0x00000800 /* * APM821xx does not support Half Duplex mode */ #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX 0x00001000 /* Right now, we don't quite handle the always/possible masks on the * most optimal way as we don't have a way to say something like * always EMAC4. Patches welcome. */ enum { EMAC_FTRS_ALWAYS = 0, EMAC_FTRS_POSSIBLE = #ifdef CONFIG_IBM_EMAC_EMAC4 EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC | EMAC_FTR_HAS_NEW_STACR | EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX | #endif #ifdef CONFIG_IBM_EMAC_TAH EMAC_FTR_HAS_TAH | #endif #ifdef CONFIG_IBM_EMAC_ZMII EMAC_FTR_HAS_ZMII | #endif #ifdef CONFIG_IBM_EMAC_RGMII EMAC_FTR_HAS_RGMII | #endif #ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL EMAC_FTR_NO_FLOW_CONTROL_40x | #endif EMAC_FTR_460EX_PHY_CLK_FIX | EMAC_FTR_440EP_PHY_CLK_FIX | EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE | EMAC_FTR_APM821XX_NO_HALF_DUPLEX, }; static inline int emac_has_feature(struct emac_instance *dev, unsigned long feature) { return (EMAC_FTRS_ALWAYS & feature) || (EMAC_FTRS_POSSIBLE & dev->features & feature); } /* * Various instances of the EMAC core have varying 1) number of * address match slots, 2) width of the registers for handling address * match slots, 3) number of registers for handling address match * slots and 4) base offset for those registers. * * These macros and inlines handle these differences based on * parameters supplied by the device structure which are, in turn, * initialized based on the "compatible" entry in the device tree. */ #define EMAC4_XAHT_SLOTS_SHIFT 6 #define EMAC4_XAHT_WIDTH_SHIFT 4 #define EMAC4SYNC_XAHT_SLOTS_SHIFT 8 #define EMAC4SYNC_XAHT_WIDTH_SHIFT 5 /* The largest span between slots and widths above is 3 */ #define EMAC_XAHT_MAX_REGS (1 << 3) #define EMAC_XAHT_SLOTS(dev) (1 << (dev)->xaht_slots_shift) #define EMAC_XAHT_WIDTH(dev) (1 << (dev)->xaht_width_shift) #define EMAC_XAHT_REGS(dev) (1 << ((dev)->xaht_slots_shift - \ (dev)->xaht_width_shift)) #define EMAC_XAHT_CRC_TO_SLOT(dev, crc) \ ((EMAC_XAHT_SLOTS(dev) - 1) - \ ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) - \ (dev)->xaht_slots_shift))) #define EMAC_XAHT_SLOT_TO_REG(dev, slot) \ ((slot) >> (dev)->xaht_width_shift) #define EMAC_XAHT_SLOT_TO_MASK(dev, slot) \ ((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >> \ ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1))) static inline u32 *emac_xaht_base(struct emac_instance *dev) { struct emac_regs __iomem *p = dev->emacp; int offset; /* The first IAHT entry always is the base of the block of * IAHT and GAHT registers. */ if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC)) offset = offsetof(struct emac_regs, u1.emac4sync.iaht1); else offset = offsetof(struct emac_regs, u0.emac4.iaht1); return (u32 *)((ptrdiff_t)p + offset); } static inline u32 *emac_gaht_base(struct emac_instance *dev) { /* GAHT registers always come after an identical number of * IAHT registers. */ return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev); } static inline u32 *emac_iaht_base(struct emac_instance *dev) { /* IAHT registers always come before an identical number of * GAHT registers. */ return emac_xaht_base(dev); } /* Ethtool get_regs complex data. * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH * when available. * * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. * Each register component is preceded with emac_ethtool_regs_subhdr. * Order of the optional headers follows their relative bit posititions * in emac_ethtool_regs_hdr.components */ #define EMAC_ETHTOOL_REGS_ZMII 0x00000001 #define EMAC_ETHTOOL_REGS_RGMII 0x00000002 #define EMAC_ETHTOOL_REGS_TAH 0x00000004 struct emac_ethtool_regs_hdr { u32 components; }; struct emac_ethtool_regs_subhdr { u32 version; u32 index; }; #define EMAC_ETHTOOL_REGS_VER 3 #define EMAC4_ETHTOOL_REGS_VER 4 #define EMAC4SYNC_ETHTOOL_REGS_VER 5 #endif /* __IBM_NEWEMAC_CORE_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1