Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dustin McIntire | 2408 | 70.14% | 1 | 7.14% |
Magnus Damm | 800 | 23.30% | 2 | 14.29% |
Robert Jarzmik | 96 | 2.80% | 1 | 7.14% |
Russell King | 52 | 1.51% | 1 | 7.14% |
Guennadi Liakhovetski | 34 | 0.99% | 1 | 7.14% |
Markus Brunner | 19 | 0.55% | 1 | 7.14% |
Dmitry Eremin-Solenikov | 8 | 0.23% | 1 | 7.14% |
Matthew Leach | 8 | 0.23% | 1 | 7.14% |
Peter Korsgaard | 3 | 0.09% | 1 | 7.14% |
Tony Lindgren | 2 | 0.06% | 2 | 14.29% |
Paul Mundt | 2 | 0.06% | 1 | 7.14% |
Jeff Kirsher | 1 | 0.03% | 1 | 7.14% |
Total | 3433 | 14 |
/*------------------------------------------------------------------------ . smc911x.h - macros for SMSC's LAN911{5,6,7,8} single-chip Ethernet device. . . Copyright (C) 2005 Sensoria Corp. . Derived from the unified SMC91x driver by Nicolas Pitre . . This program is free software; you can redistribute it and/or modify . it under the terms of the GNU General Public License as published by . the Free Software Foundation; either version 2 of the License, or . (at your option) any later version. . . This program is distributed in the hope that it will be useful, . but WITHOUT ANY WARRANTY; without even the implied warranty of . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the . GNU General Public License for more details. . . You should have received a copy of the GNU General Public License . along with this program; if not, see <http://www.gnu.org/licenses/>. . . Information contained in this file was obtained from the LAN9118 . manual from SMC. To get a copy, if you really want one, you can find . information under www.smsc.com. . . Authors . Dustin McIntire <dustin@sensoria.com> . ---------------------------------------------------------------------------*/ #ifndef _SMC911X_H_ #define _SMC911X_H_ #include <linux/smc911x.h> /* * Use the DMA feature on PXA chips */ #ifdef CONFIG_ARCH_PXA #define SMC_USE_PXA_DMA 1 #define SMC_USE_16BIT 0 #define SMC_USE_32BIT 1 #define SMC_IRQ_SENSE IRQF_TRIGGER_FALLING #elif defined(CONFIG_SH_MAGIC_PANEL_R2) #define SMC_USE_16BIT 0 #define SMC_USE_32BIT 1 #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW #elif defined(CONFIG_ARCH_OMAP3) #define SMC_USE_16BIT 0 #define SMC_USE_32BIT 1 #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW #define SMC_MEM_RESERVED 1 #elif defined(CONFIG_ARCH_OMAP2) #define SMC_USE_16BIT 0 #define SMC_USE_32BIT 1 #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW #define SMC_MEM_RESERVED 1 #else /* * Default configuration */ #define SMC_DYNAMIC_BUS_CONFIG #endif #ifdef SMC_USE_PXA_DMA #define SMC_USE_DMA #endif /* store this information for the driver.. */ struct smc911x_local { /* * If I have to wait until the DMA is finished and ready to reload a * packet, I will store the skbuff here. Then, the DMA will send it * out and free it. */ struct sk_buff *pending_tx_skb; /* version/revision of the SMC911x chip */ u16 version; u16 revision; /* FIFO sizes */ int tx_fifo_kb; int tx_fifo_size; int rx_fifo_size; int afc_cfg; /* Contains the current active receive/phy mode */ int ctl_rfduplx; int ctl_rspeed; u32 msg_enable; u32 phy_type; struct mii_if_info mii; /* work queue */ struct work_struct phy_configure; int tx_throttle; spinlock_t lock; struct net_device *netdev; #ifdef SMC_USE_DMA /* DMA needs the physical address of the chip */ u_long physaddr; struct dma_chan *rxdma; struct dma_chan *txdma; int rxdma_active; int txdma_active; struct sk_buff *current_rx_skb; struct sk_buff *current_tx_skb; struct device *dev; #endif void __iomem *base; #ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata cfg; #endif }; /* * Define the bus width specific IO macros */ #ifdef SMC_DYNAMIC_BUS_CONFIG static inline unsigned int SMC_inl(struct smc911x_local *lp, int reg) { void __iomem *ioaddr = lp->base + reg; if (lp->cfg.flags & SMC911X_USE_32BIT) return readl(ioaddr); if (lp->cfg.flags & SMC911X_USE_16BIT) return readw(ioaddr) | (readw(ioaddr + 2) << 16); BUG(); } static inline void SMC_outl(unsigned int value, struct smc911x_local *lp, int reg) { void __iomem *ioaddr = lp->base + reg; if (lp->cfg.flags & SMC911X_USE_32BIT) { writel(value, ioaddr); return; } if (lp->cfg.flags & SMC911X_USE_16BIT) { writew(value & 0xffff, ioaddr); writew(value >> 16, ioaddr + 2); return; } BUG(); } static inline void SMC_insl(struct smc911x_local *lp, int reg, void *addr, unsigned int count) { void __iomem *ioaddr = lp->base + reg; if (lp->cfg.flags & SMC911X_USE_32BIT) { ioread32_rep(ioaddr, addr, count); return; } if (lp->cfg.flags & SMC911X_USE_16BIT) { ioread16_rep(ioaddr, addr, count * 2); return; } BUG(); } static inline void SMC_outsl(struct smc911x_local *lp, int reg, void *addr, unsigned int count) { void __iomem *ioaddr = lp->base + reg; if (lp->cfg.flags & SMC911X_USE_32BIT) { iowrite32_rep(ioaddr, addr, count); return; } if (lp->cfg.flags & SMC911X_USE_16BIT) { iowrite16_rep(ioaddr, addr, count * 2); return; } BUG(); } #else #if SMC_USE_16BIT #define SMC_inl(lp, r) ((readw((lp)->base + (r)) & 0xFFFF) + (readw((lp)->base + (r) + 2) << 16)) #define SMC_outl(v, lp, r) \ do{ \ writew(v & 0xFFFF, (lp)->base + (r)); \ writew(v >> 16, (lp)->base + (r) + 2); \ } while (0) #define SMC_insl(lp, r, p, l) ioread16_rep((short*)((lp)->base + (r)), p, l*2) #define SMC_outsl(lp, r, p, l) iowrite16_rep((short*)((lp)->base + (r)), p, l*2) #elif SMC_USE_32BIT #define SMC_inl(lp, r) readl((lp)->base + (r)) #define SMC_outl(v, lp, r) writel(v, (lp)->base + (r)) #define SMC_insl(lp, r, p, l) ioread32_rep((int*)((lp)->base + (r)), p, l) #define SMC_outsl(lp, r, p, l) iowrite32_rep((int*)((lp)->base + (r)), p, l) #endif /* SMC_USE_16BIT */ #endif /* SMC_DYNAMIC_BUS_CONFIG */ #ifdef SMC_USE_PXA_DMA /* * Use a DMA for RX and TX packets. */ #include <linux/dma-mapping.h> static dma_addr_t rx_dmabuf, tx_dmabuf; static int rx_dmalen, tx_dmalen; static void smc911x_rx_dma_irq(void *data); static void smc911x_tx_dma_irq(void *data); #ifdef SMC_insl #undef SMC_insl #define SMC_insl(lp, r, p, l) \ smc_pxa_dma_insl(lp, lp->physaddr, r, lp->rxdma, p, l) static inline void smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr, int reg, struct dma_chan *dma, u_char *buf, int len) { struct dma_async_tx_descriptor *tx; /* 64 bit alignment is required for memory to memory DMA */ if ((long)buf & 4) { *((u32 *)buf) = SMC_inl(lp, reg); buf += 4; len--; } len *= 4; rx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_FROM_DEVICE); rx_dmalen = len; tx = dmaengine_prep_slave_single(dma, rx_dmabuf, rx_dmalen, DMA_DEV_TO_MEM, 0); if (tx) { tx->callback = smc911x_rx_dma_irq; tx->callback_param = lp; dmaengine_submit(tx); dma_async_issue_pending(dma); } } #endif #ifdef SMC_outsl #undef SMC_outsl #define SMC_outsl(lp, r, p, l) \ smc_pxa_dma_outsl(lp, lp->physaddr, r, lp->txdma, p, l) static inline void smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr, int reg, struct dma_chan *dma, u_char *buf, int len) { struct dma_async_tx_descriptor *tx; /* 64 bit alignment is required for memory to memory DMA */ if ((long)buf & 4) { SMC_outl(*((u32 *)buf), lp, reg); buf += 4; len--; } len *= 4; tx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_TO_DEVICE); tx_dmalen = len; tx = dmaengine_prep_slave_single(dma, tx_dmabuf, tx_dmalen, DMA_DEV_TO_MEM, 0); if (tx) { tx->callback = smc911x_tx_dma_irq; tx->callback_param = lp; dmaengine_submit(tx); dma_async_issue_pending(dma); } } #endif #endif /* SMC_USE_PXA_DMA */ /* Chip Parameters and Register Definitions */ #define SMC911X_TX_FIFO_LOW_THRESHOLD (1536*2) #define SMC911X_IO_EXTENT 0x100 #define SMC911X_EEPROM_LEN 7 /* Below are the register offsets and bit definitions * of the Lan911x memory space */ #define RX_DATA_FIFO (0x00) #define TX_DATA_FIFO (0x20) #define TX_CMD_A_INT_ON_COMP_ (0x80000000) #define TX_CMD_A_INT_BUF_END_ALGN_ (0x03000000) #define TX_CMD_A_INT_4_BYTE_ALGN_ (0x00000000) #define TX_CMD_A_INT_16_BYTE_ALGN_ (0x01000000) #define TX_CMD_A_INT_32_BYTE_ALGN_ (0x02000000) #define TX_CMD_A_INT_DATA_OFFSET_ (0x001F0000) #define TX_CMD_A_INT_FIRST_SEG_ (0x00002000) #define TX_CMD_A_INT_LAST_SEG_ (0x00001000) #define TX_CMD_A_BUF_SIZE_ (0x000007FF) #define TX_CMD_B_PKT_TAG_ (0xFFFF0000) #define TX_CMD_B_ADD_CRC_DISABLE_ (0x00002000) #define TX_CMD_B_DISABLE_PADDING_ (0x00001000) #define TX_CMD_B_PKT_BYTE_LENGTH_ (0x000007FF) #define RX_STATUS_FIFO (0x40) #define RX_STS_PKT_LEN_ (0x3FFF0000) #define RX_STS_ES_ (0x00008000) #define RX_STS_BCST_ (0x00002000) #define RX_STS_LEN_ERR_ (0x00001000) #define RX_STS_RUNT_ERR_ (0x00000800) #define RX_STS_MCAST_ (0x00000400) #define RX_STS_TOO_LONG_ (0x00000080) #define RX_STS_COLL_ (0x00000040) #define RX_STS_ETH_TYPE_ (0x00000020) #define RX_STS_WDOG_TMT_ (0x00000010) #define RX_STS_MII_ERR_ (0x00000008) #define RX_STS_DRIBBLING_ (0x00000004) #define RX_STS_CRC_ERR_ (0x00000002) #define RX_STATUS_FIFO_PEEK (0x44) #define TX_STATUS_FIFO (0x48) #define TX_STS_TAG_ (0xFFFF0000) #define TX_STS_ES_ (0x00008000) #define TX_STS_LOC_ (0x00000800) #define TX_STS_NO_CARR_ (0x00000400) #define TX_STS_LATE_COLL_ (0x00000200) #define TX_STS_MANY_COLL_ (0x00000100) #define TX_STS_COLL_CNT_ (0x00000078) #define TX_STS_MANY_DEFER_ (0x00000004) #define TX_STS_UNDERRUN_ (0x00000002) #define TX_STS_DEFERRED_ (0x00000001) #define TX_STATUS_FIFO_PEEK (0x4C) #define ID_REV (0x50) #define ID_REV_CHIP_ID_ (0xFFFF0000) /* RO */ #define ID_REV_REV_ID_ (0x0000FFFF) /* RO */ #define INT_CFG (0x54) #define INT_CFG_INT_DEAS_ (0xFF000000) /* R/W */ #define INT_CFG_INT_DEAS_CLR_ (0x00004000) #define INT_CFG_INT_DEAS_STS_ (0x00002000) #define INT_CFG_IRQ_INT_ (0x00001000) /* RO */ #define INT_CFG_IRQ_EN_ (0x00000100) /* R/W */ #define INT_CFG_IRQ_POL_ (0x00000010) /* R/W Not Affected by SW Reset */ #define INT_CFG_IRQ_TYPE_ (0x00000001) /* R/W Not Affected by SW Reset */ #define INT_STS (0x58) #define INT_STS_SW_INT_ (0x80000000) /* R/WC */ #define INT_STS_TXSTOP_INT_ (0x02000000) /* R/WC */ #define INT_STS_RXSTOP_INT_ (0x01000000) /* R/WC */ #define INT_STS_RXDFH_INT_ (0x00800000) /* R/WC */ #define INT_STS_RXDF_INT_ (0x00400000) /* R/WC */ #define INT_STS_TX_IOC_ (0x00200000) /* R/WC */ #define INT_STS_RXD_INT_ (0x00100000) /* R/WC */ #define INT_STS_GPT_INT_ (0x00080000) /* R/WC */ #define INT_STS_PHY_INT_ (0x00040000) /* RO */ #define INT_STS_PME_INT_ (0x00020000) /* R/WC */ #define INT_STS_TXSO_ (0x00010000) /* R/WC */ #define INT_STS_RWT_ (0x00008000) /* R/WC */ #define INT_STS_RXE_ (0x00004000) /* R/WC */ #define INT_STS_TXE_ (0x00002000) /* R/WC */ //#define INT_STS_ERX_ (0x00001000) /* R/WC */ #define INT_STS_TDFU_ (0x00000800) /* R/WC */ #define INT_STS_TDFO_ (0x00000400) /* R/WC */ #define INT_STS_TDFA_ (0x00000200) /* R/WC */ #define INT_STS_TSFF_ (0x00000100) /* R/WC */ #define INT_STS_TSFL_ (0x00000080) /* R/WC */ //#define INT_STS_RXDF_ (0x00000040) /* R/WC */ #define INT_STS_RDFO_ (0x00000040) /* R/WC */ #define INT_STS_RDFL_ (0x00000020) /* R/WC */ #define INT_STS_RSFF_ (0x00000010) /* R/WC */ #define INT_STS_RSFL_ (0x00000008) /* R/WC */ #define INT_STS_GPIO2_INT_ (0x00000004) /* R/WC */ #define INT_STS_GPIO1_INT_ (0x00000002) /* R/WC */ #define INT_STS_GPIO0_INT_ (0x00000001) /* R/WC */ #define INT_EN (0x5C) #define INT_EN_SW_INT_EN_ (0x80000000) /* R/W */ #define INT_EN_TXSTOP_INT_EN_ (0x02000000) /* R/W */ #define INT_EN_RXSTOP_INT_EN_ (0x01000000) /* R/W */ #define INT_EN_RXDFH_INT_EN_ (0x00800000) /* R/W */ //#define INT_EN_RXDF_INT_EN_ (0x00400000) /* R/W */ #define INT_EN_TIOC_INT_EN_ (0x00200000) /* R/W */ #define INT_EN_RXD_INT_EN_ (0x00100000) /* R/W */ #define INT_EN_GPT_INT_EN_ (0x00080000) /* R/W */ #define INT_EN_PHY_INT_EN_ (0x00040000) /* R/W */ #define INT_EN_PME_INT_EN_ (0x00020000) /* R/W */ #define INT_EN_TXSO_EN_ (0x00010000) /* R/W */ #define INT_EN_RWT_EN_ (0x00008000) /* R/W */ #define INT_EN_RXE_EN_ (0x00004000) /* R/W */ #define INT_EN_TXE_EN_ (0x00002000) /* R/W */ //#define INT_EN_ERX_EN_ (0x00001000) /* R/W */ #define INT_EN_TDFU_EN_ (0x00000800) /* R/W */ #define INT_EN_TDFO_EN_ (0x00000400) /* R/W */ #define INT_EN_TDFA_EN_ (0x00000200) /* R/W */ #define INT_EN_TSFF_EN_ (0x00000100) /* R/W */ #define INT_EN_TSFL_EN_ (0x00000080) /* R/W */ //#define INT_EN_RXDF_EN_ (0x00000040) /* R/W */ #define INT_EN_RDFO_EN_ (0x00000040) /* R/W */ #define INT_EN_RDFL_EN_ (0x00000020) /* R/W */ #define INT_EN_RSFF_EN_ (0x00000010) /* R/W */ #define INT_EN_RSFL_EN_ (0x00000008) /* R/W */ #define INT_EN_GPIO2_INT_ (0x00000004) /* R/W */ #define INT_EN_GPIO1_INT_ (0x00000002) /* R/W */ #define INT_EN_GPIO0_INT_ (0x00000001) /* R/W */ #define BYTE_TEST (0x64) #define FIFO_INT (0x68) #define FIFO_INT_TX_AVAIL_LEVEL_ (0xFF000000) /* R/W */ #define FIFO_INT_TX_STS_LEVEL_ (0x00FF0000) /* R/W */ #define FIFO_INT_RX_AVAIL_LEVEL_ (0x0000FF00) /* R/W */ #define FIFO_INT_RX_STS_LEVEL_ (0x000000FF) /* R/W */ #define RX_CFG (0x6C) #define RX_CFG_RX_END_ALGN_ (0xC0000000) /* R/W */ #define RX_CFG_RX_END_ALGN4_ (0x00000000) /* R/W */ #define RX_CFG_RX_END_ALGN16_ (0x40000000) /* R/W */ #define RX_CFG_RX_END_ALGN32_ (0x80000000) /* R/W */ #define RX_CFG_RX_DMA_CNT_ (0x0FFF0000) /* R/W */ #define RX_CFG_RX_DUMP_ (0x00008000) /* R/W */ #define RX_CFG_RXDOFF_ (0x00001F00) /* R/W */ //#define RX_CFG_RXBAD_ (0x00000001) /* R/W */ #define TX_CFG (0x70) //#define TX_CFG_TX_DMA_LVL_ (0xE0000000) /* R/W */ //#define TX_CFG_TX_DMA_CNT_ (0x0FFF0000) /* R/W Self Clearing */ #define TX_CFG_TXS_DUMP_ (0x00008000) /* Self Clearing */ #define TX_CFG_TXD_DUMP_ (0x00004000) /* Self Clearing */ #define TX_CFG_TXSAO_ (0x00000004) /* R/W */ #define TX_CFG_TX_ON_ (0x00000002) /* R/W */ #define TX_CFG_STOP_TX_ (0x00000001) /* Self Clearing */ #define HW_CFG (0x74) #define HW_CFG_TTM_ (0x00200000) /* R/W */ #define HW_CFG_SF_ (0x00100000) /* R/W */ #define HW_CFG_TX_FIF_SZ_ (0x000F0000) /* R/W */ #define HW_CFG_TR_ (0x00003000) /* R/W */ #define HW_CFG_PHY_CLK_SEL_ (0x00000060) /* R/W */ #define HW_CFG_PHY_CLK_SEL_INT_PHY_ (0x00000000) /* R/W */ #define HW_CFG_PHY_CLK_SEL_EXT_PHY_ (0x00000020) /* R/W */ #define HW_CFG_PHY_CLK_SEL_CLK_DIS_ (0x00000040) /* R/W */ #define HW_CFG_SMI_SEL_ (0x00000010) /* R/W */ #define HW_CFG_EXT_PHY_DET_ (0x00000008) /* RO */ #define HW_CFG_EXT_PHY_EN_ (0x00000004) /* R/W */ #define HW_CFG_32_16_BIT_MODE_ (0x00000004) /* RO */ #define HW_CFG_SRST_TO_ (0x00000002) /* RO */ #define HW_CFG_SRST_ (0x00000001) /* Self Clearing */ #define RX_DP_CTRL (0x78) #define RX_DP_CTRL_RX_FFWD_ (0x80000000) /* R/W */ #define RX_DP_CTRL_FFWD_BUSY_ (0x80000000) /* RO */ #define RX_FIFO_INF (0x7C) #define RX_FIFO_INF_RXSUSED_ (0x00FF0000) /* RO */ #define RX_FIFO_INF_RXDUSED_ (0x0000FFFF) /* RO */ #define TX_FIFO_INF (0x80) #define TX_FIFO_INF_TSUSED_ (0x00FF0000) /* RO */ #define TX_FIFO_INF_TDFREE_ (0x0000FFFF) /* RO */ #define PMT_CTRL (0x84) #define PMT_CTRL_PM_MODE_ (0x00003000) /* Self Clearing */ #define PMT_CTRL_PHY_RST_ (0x00000400) /* Self Clearing */ #define PMT_CTRL_WOL_EN_ (0x00000200) /* R/W */ #define PMT_CTRL_ED_EN_ (0x00000100) /* R/W */ #define PMT_CTRL_PME_TYPE_ (0x00000040) /* R/W Not Affected by SW Reset */ #define PMT_CTRL_WUPS_ (0x00000030) /* R/WC */ #define PMT_CTRL_WUPS_NOWAKE_ (0x00000000) /* R/WC */ #define PMT_CTRL_WUPS_ED_ (0x00000010) /* R/WC */ #define PMT_CTRL_WUPS_WOL_ (0x00000020) /* R/WC */ #define PMT_CTRL_WUPS_MULTI_ (0x00000030) /* R/WC */ #define PMT_CTRL_PME_IND_ (0x00000008) /* R/W */ #define PMT_CTRL_PME_POL_ (0x00000004) /* R/W */ #define PMT_CTRL_PME_EN_ (0x00000002) /* R/W Not Affected by SW Reset */ #define PMT_CTRL_READY_ (0x00000001) /* RO */ #define GPIO_CFG (0x88) #define GPIO_CFG_LED3_EN_ (0x40000000) /* R/W */ #define GPIO_CFG_LED2_EN_ (0x20000000) /* R/W */ #define GPIO_CFG_LED1_EN_ (0x10000000) /* R/W */ #define GPIO_CFG_GPIO2_INT_POL_ (0x04000000) /* R/W */ #define GPIO_CFG_GPIO1_INT_POL_ (0x02000000) /* R/W */ #define GPIO_CFG_GPIO0_INT_POL_ (0x01000000) /* R/W */ #define GPIO_CFG_EEPR_EN_ (0x00700000) /* R/W */ #define GPIO_CFG_GPIOBUF2_ (0x00040000) /* R/W */ #define GPIO_CFG_GPIOBUF1_ (0x00020000) /* R/W */ #define GPIO_CFG_GPIOBUF0_ (0x00010000) /* R/W */ #define GPIO_CFG_GPIODIR2_ (0x00000400) /* R/W */ #define GPIO_CFG_GPIODIR1_ (0x00000200) /* R/W */ #define GPIO_CFG_GPIODIR0_ (0x00000100) /* R/W */ #define GPIO_CFG_GPIOD4_ (0x00000010) /* R/W */ #define GPIO_CFG_GPIOD3_ (0x00000008) /* R/W */ #define GPIO_CFG_GPIOD2_ (0x00000004) /* R/W */ #define GPIO_CFG_GPIOD1_ (0x00000002) /* R/W */ #define GPIO_CFG_GPIOD0_ (0x00000001) /* R/W */ #define GPT_CFG (0x8C) #define GPT_CFG_TIMER_EN_ (0x20000000) /* R/W */ #define GPT_CFG_GPT_LOAD_ (0x0000FFFF) /* R/W */ #define GPT_CNT (0x90) #define GPT_CNT_GPT_CNT_ (0x0000FFFF) /* RO */ #define ENDIAN (0x98) #define FREE_RUN (0x9C) #define RX_DROP (0xA0) #define MAC_CSR_CMD (0xA4) #define MAC_CSR_CMD_CSR_BUSY_ (0x80000000) /* Self Clearing */ #define MAC_CSR_CMD_R_NOT_W_ (0x40000000) /* R/W */ #define MAC_CSR_CMD_CSR_ADDR_ (0x000000FF) /* R/W */ #define MAC_CSR_DATA (0xA8) #define AFC_CFG (0xAC) #define AFC_CFG_AFC_HI_ (0x00FF0000) /* R/W */ #define AFC_CFG_AFC_LO_ (0x0000FF00) /* R/W */ #define AFC_CFG_BACK_DUR_ (0x000000F0) /* R/W */ #define AFC_CFG_FCMULT_ (0x00000008) /* R/W */ #define AFC_CFG_FCBRD_ (0x00000004) /* R/W */ #define AFC_CFG_FCADD_ (0x00000002) /* R/W */ #define AFC_CFG_FCANY_ (0x00000001) /* R/W */ #define E2P_CMD (0xB0) #define E2P_CMD_EPC_BUSY_ (0x80000000) /* Self Clearing */ #define E2P_CMD_EPC_CMD_ (0x70000000) /* R/W */ #define E2P_CMD_EPC_CMD_READ_ (0x00000000) /* R/W */ #define E2P_CMD_EPC_CMD_EWDS_ (0x10000000) /* R/W */ #define E2P_CMD_EPC_CMD_EWEN_ (0x20000000) /* R/W */ #define E2P_CMD_EPC_CMD_WRITE_ (0x30000000) /* R/W */ #define E2P_CMD_EPC_CMD_WRAL_ (0x40000000) /* R/W */ #define E2P_CMD_EPC_CMD_ERASE_ (0x50000000) /* R/W */ #define E2P_CMD_EPC_CMD_ERAL_ (0x60000000) /* R/W */ #define E2P_CMD_EPC_CMD_RELOAD_ (0x70000000) /* R/W */ #define E2P_CMD_EPC_TIMEOUT_ (0x00000200) /* RO */ #define E2P_CMD_MAC_ADDR_LOADED_ (0x00000100) /* RO */ #define E2P_CMD_EPC_ADDR_ (0x000000FF) /* R/W */ #define E2P_DATA (0xB4) #define E2P_DATA_EEPROM_DATA_ (0x000000FF) /* R/W */ /* end of LAN register offsets and bit definitions */ /* **************************************************************************** **************************************************************************** * MAC Control and Status Register (Indirect Address) * Offset (through the MAC_CSR CMD and DATA port) **************************************************************************** **************************************************************************** * */ #define MAC_CR (0x01) /* R/W */ /* MAC_CR - MAC Control Register */ #define MAC_CR_RXALL_ (0x80000000) // TODO: delete this bit? It is not described in the data sheet. #define MAC_CR_HBDIS_ (0x10000000) #define MAC_CR_RCVOWN_ (0x00800000) #define MAC_CR_LOOPBK_ (0x00200000) #define MAC_CR_FDPX_ (0x00100000) #define MAC_CR_MCPAS_ (0x00080000) #define MAC_CR_PRMS_ (0x00040000) #define MAC_CR_INVFILT_ (0x00020000) #define MAC_CR_PASSBAD_ (0x00010000) #define MAC_CR_HFILT_ (0x00008000) #define MAC_CR_HPFILT_ (0x00002000) #define MAC_CR_LCOLL_ (0x00001000) #define MAC_CR_BCAST_ (0x00000800) #define MAC_CR_DISRTY_ (0x00000400) #define MAC_CR_PADSTR_ (0x00000100) #define MAC_CR_BOLMT_MASK_ (0x000000C0) #define MAC_CR_DFCHK_ (0x00000020) #define MAC_CR_TXEN_ (0x00000008) #define MAC_CR_RXEN_ (0x00000004) #define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ #define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ #define HASHH (0x04) /* R/W */ #define HASHL (0x05) /* R/W */ #define MII_ACC (0x06) /* R/W */ #define MII_ACC_PHY_ADDR_ (0x0000F800) #define MII_ACC_MIIRINDA_ (0x000007C0) #define MII_ACC_MII_WRITE_ (0x00000002) #define MII_ACC_MII_BUSY_ (0x00000001) #define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ #define FLOW (0x08) /* R/W */ #define FLOW_FCPT_ (0xFFFF0000) #define FLOW_FCPASS_ (0x00000004) #define FLOW_FCEN_ (0x00000002) #define FLOW_FCBSY_ (0x00000001) #define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ #define VLAN1_VTI1_ (0x0000ffff) #define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ #define VLAN2_VTI2_ (0x0000ffff) #define WUFF (0x0B) /* WO */ #define WUCSR (0x0C) /* R/W */ #define WUCSR_GUE_ (0x00000200) #define WUCSR_WUFR_ (0x00000040) #define WUCSR_MPR_ (0x00000020) #define WUCSR_WAKE_EN_ (0x00000004) #define WUCSR_MPEN_ (0x00000002) /* **************************************************************************** * Chip Specific MII Defines **************************************************************************** * * Phy register offsets and bit definitions * */ #define PHY_MODE_CTRL_STS ((u32)17) /* Mode Control/Status Register */ //#define MODE_CTRL_STS_FASTRIP_ ((u16)0x4000) #define MODE_CTRL_STS_EDPWRDOWN_ ((u16)0x2000) //#define MODE_CTRL_STS_LOWSQEN_ ((u16)0x0800) //#define MODE_CTRL_STS_MDPREBP_ ((u16)0x0400) //#define MODE_CTRL_STS_FARLOOPBACK_ ((u16)0x0200) //#define MODE_CTRL_STS_FASTEST_ ((u16)0x0100) //#define MODE_CTRL_STS_REFCLKEN_ ((u16)0x0010) //#define MODE_CTRL_STS_PHYADBP_ ((u16)0x0008) //#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004) #define MODE_CTRL_STS_ENERGYON_ ((u16)0x0002) #define PHY_INT_SRC ((u32)29) #define PHY_INT_SRC_ENERGY_ON_ ((u16)0x0080) #define PHY_INT_SRC_ANEG_COMP_ ((u16)0x0040) #define PHY_INT_SRC_REMOTE_FAULT_ ((u16)0x0020) #define PHY_INT_SRC_LINK_DOWN_ ((u16)0x0010) #define PHY_INT_SRC_ANEG_LP_ACK_ ((u16)0x0008) #define PHY_INT_SRC_PAR_DET_FAULT_ ((u16)0x0004) #define PHY_INT_SRC_ANEG_PGRX_ ((u16)0x0002) #define PHY_INT_MASK ((u32)30) #define PHY_INT_MASK_ENERGY_ON_ ((u16)0x0080) #define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040) #define PHY_INT_MASK_REMOTE_FAULT_ ((u16)0x0020) #define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010) #define PHY_INT_MASK_ANEG_LP_ACK_ ((u16)0x0008) #define PHY_INT_MASK_PAR_DET_FAULT_ ((u16)0x0004) #define PHY_INT_MASK_ANEG_PGRX_ ((u16)0x0002) #define PHY_SPECIAL ((u32)31) #define PHY_SPECIAL_ANEG_DONE_ ((u16)0x1000) #define PHY_SPECIAL_RES_ ((u16)0x0040) #define PHY_SPECIAL_RES_MASK_ ((u16)0x0FE1) #define PHY_SPECIAL_SPD_ ((u16)0x001C) #define PHY_SPECIAL_SPD_10HALF_ ((u16)0x0004) #define PHY_SPECIAL_SPD_10FULL_ ((u16)0x0014) #define PHY_SPECIAL_SPD_100HALF_ ((u16)0x0008) #define PHY_SPECIAL_SPD_100FULL_ ((u16)0x0018) #define LAN911X_INTERNAL_PHY_ID (0x0007C000) /* Chip ID values */ #define CHIP_9115 0x0115 #define CHIP_9116 0x0116 #define CHIP_9117 0x0117 #define CHIP_9118 0x0118 #define CHIP_9211 0x9211 #define CHIP_9215 0x115A #define CHIP_9217 0x117A #define CHIP_9218 0x118A struct chip_id { u16 id; char *name; }; static const struct chip_id chip_ids[] = { { CHIP_9115, "LAN9115" }, { CHIP_9116, "LAN9116" }, { CHIP_9117, "LAN9117" }, { CHIP_9118, "LAN9118" }, { CHIP_9211, "LAN9211" }, { CHIP_9215, "LAN9215" }, { CHIP_9217, "LAN9217" }, { CHIP_9218, "LAN9218" }, { 0, NULL }, }; #define IS_REV_A(x) ((x & 0xFFFF)==0) /* * Macros to abstract register access according to the data bus * capabilities. Please use those and not the in/out primitives. */ /* FIFO read/write macros */ #define SMC_PUSH_DATA(lp, p, l) SMC_outsl( lp, TX_DATA_FIFO, p, (l) >> 2 ) #define SMC_PULL_DATA(lp, p, l) SMC_insl ( lp, RX_DATA_FIFO, p, (l) >> 2 ) #define SMC_SET_TX_FIFO(lp, x) SMC_outl( x, lp, TX_DATA_FIFO ) #define SMC_GET_RX_FIFO(lp) SMC_inl( lp, RX_DATA_FIFO ) /* I/O mapped register read/write macros */ #define SMC_GET_TX_STS_FIFO(lp) SMC_inl( lp, TX_STATUS_FIFO ) #define SMC_GET_RX_STS_FIFO(lp) SMC_inl( lp, RX_STATUS_FIFO ) #define SMC_GET_RX_STS_FIFO_PEEK(lp) SMC_inl( lp, RX_STATUS_FIFO_PEEK ) #define SMC_GET_PN(lp) (SMC_inl( lp, ID_REV ) >> 16) #define SMC_GET_REV(lp) (SMC_inl( lp, ID_REV ) & 0xFFFF) #define SMC_GET_IRQ_CFG(lp) SMC_inl( lp, INT_CFG ) #define SMC_SET_IRQ_CFG(lp, x) SMC_outl( x, lp, INT_CFG ) #define SMC_GET_INT(lp) SMC_inl( lp, INT_STS ) #define SMC_ACK_INT(lp, x) SMC_outl( x, lp, INT_STS ) #define SMC_GET_INT_EN(lp) SMC_inl( lp, INT_EN ) #define SMC_SET_INT_EN(lp, x) SMC_outl( x, lp, INT_EN ) #define SMC_GET_BYTE_TEST(lp) SMC_inl( lp, BYTE_TEST ) #define SMC_SET_BYTE_TEST(lp, x) SMC_outl( x, lp, BYTE_TEST ) #define SMC_GET_FIFO_INT(lp) SMC_inl( lp, FIFO_INT ) #define SMC_SET_FIFO_INT(lp, x) SMC_outl( x, lp, FIFO_INT ) #define SMC_SET_FIFO_TDA(lp, x) \ do { \ unsigned long __flags; \ int __mask; \ local_irq_save(__flags); \ __mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<24); \ SMC_SET_FIFO_INT( (lp), __mask | (x)<<24 ); \ local_irq_restore(__flags); \ } while (0) #define SMC_SET_FIFO_TSL(lp, x) \ do { \ unsigned long __flags; \ int __mask; \ local_irq_save(__flags); \ __mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<16); \ SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<16)); \ local_irq_restore(__flags); \ } while (0) #define SMC_SET_FIFO_RSA(lp, x) \ do { \ unsigned long __flags; \ int __mask; \ local_irq_save(__flags); \ __mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<8); \ SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<8)); \ local_irq_restore(__flags); \ } while (0) #define SMC_SET_FIFO_RSL(lp, x) \ do { \ unsigned long __flags; \ int __mask; \ local_irq_save(__flags); \ __mask = SMC_GET_FIFO_INT((lp)) & ~0xFF; \ SMC_SET_FIFO_INT( (lp),__mask | ((x) & 0xFF)); \ local_irq_restore(__flags); \ } while (0) #define SMC_GET_RX_CFG(lp) SMC_inl( lp, RX_CFG ) #define SMC_SET_RX_CFG(lp, x) SMC_outl( x, lp, RX_CFG ) #define SMC_GET_TX_CFG(lp) SMC_inl( lp, TX_CFG ) #define SMC_SET_TX_CFG(lp, x) SMC_outl( x, lp, TX_CFG ) #define SMC_GET_HW_CFG(lp) SMC_inl( lp, HW_CFG ) #define SMC_SET_HW_CFG(lp, x) SMC_outl( x, lp, HW_CFG ) #define SMC_GET_RX_DP_CTRL(lp) SMC_inl( lp, RX_DP_CTRL ) #define SMC_SET_RX_DP_CTRL(lp, x) SMC_outl( x, lp, RX_DP_CTRL ) #define SMC_GET_PMT_CTRL(lp) SMC_inl( lp, PMT_CTRL ) #define SMC_SET_PMT_CTRL(lp, x) SMC_outl( x, lp, PMT_CTRL ) #define SMC_GET_GPIO_CFG(lp) SMC_inl( lp, GPIO_CFG ) #define SMC_SET_GPIO_CFG(lp, x) SMC_outl( x, lp, GPIO_CFG ) #define SMC_GET_RX_FIFO_INF(lp) SMC_inl( lp, RX_FIFO_INF ) #define SMC_SET_RX_FIFO_INF(lp, x) SMC_outl( x, lp, RX_FIFO_INF ) #define SMC_GET_TX_FIFO_INF(lp) SMC_inl( lp, TX_FIFO_INF ) #define SMC_SET_TX_FIFO_INF(lp, x) SMC_outl( x, lp, TX_FIFO_INF ) #define SMC_GET_GPT_CFG(lp) SMC_inl( lp, GPT_CFG ) #define SMC_SET_GPT_CFG(lp, x) SMC_outl( x, lp, GPT_CFG ) #define SMC_GET_RX_DROP(lp) SMC_inl( lp, RX_DROP ) #define SMC_SET_RX_DROP(lp, x) SMC_outl( x, lp, RX_DROP ) #define SMC_GET_MAC_CMD(lp) SMC_inl( lp, MAC_CSR_CMD ) #define SMC_SET_MAC_CMD(lp, x) SMC_outl( x, lp, MAC_CSR_CMD ) #define SMC_GET_MAC_DATA(lp) SMC_inl( lp, MAC_CSR_DATA ) #define SMC_SET_MAC_DATA(lp, x) SMC_outl( x, lp, MAC_CSR_DATA ) #define SMC_GET_AFC_CFG(lp) SMC_inl( lp, AFC_CFG ) #define SMC_SET_AFC_CFG(lp, x) SMC_outl( x, lp, AFC_CFG ) #define SMC_GET_E2P_CMD(lp) SMC_inl( lp, E2P_CMD ) #define SMC_SET_E2P_CMD(lp, x) SMC_outl( x, lp, E2P_CMD ) #define SMC_GET_E2P_DATA(lp) SMC_inl( lp, E2P_DATA ) #define SMC_SET_E2P_DATA(lp, x) SMC_outl( x, lp, E2P_DATA ) /* MAC register read/write macros */ #define SMC_GET_MAC_CSR(lp,a,v) \ do { \ while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ SMC_SET_MAC_CMD((lp),MAC_CSR_CMD_CSR_BUSY_ | \ MAC_CSR_CMD_R_NOT_W_ | (a) ); \ while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ v = SMC_GET_MAC_DATA((lp)); \ } while (0) #define SMC_SET_MAC_CSR(lp,a,v) \ do { \ while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ SMC_SET_MAC_DATA((lp), v); \ SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_CSR_BUSY_ | (a) ); \ while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ } while (0) #define SMC_GET_MAC_CR(lp, x) SMC_GET_MAC_CSR( (lp), MAC_CR, x ) #define SMC_SET_MAC_CR(lp, x) SMC_SET_MAC_CSR( (lp), MAC_CR, x ) #define SMC_GET_ADDRH(lp, x) SMC_GET_MAC_CSR( (lp), ADDRH, x ) #define SMC_SET_ADDRH(lp, x) SMC_SET_MAC_CSR( (lp), ADDRH, x ) #define SMC_GET_ADDRL(lp, x) SMC_GET_MAC_CSR( (lp), ADDRL, x ) #define SMC_SET_ADDRL(lp, x) SMC_SET_MAC_CSR( (lp), ADDRL, x ) #define SMC_GET_HASHH(lp, x) SMC_GET_MAC_CSR( (lp), HASHH, x ) #define SMC_SET_HASHH(lp, x) SMC_SET_MAC_CSR( (lp), HASHH, x ) #define SMC_GET_HASHL(lp, x) SMC_GET_MAC_CSR( (lp), HASHL, x ) #define SMC_SET_HASHL(lp, x) SMC_SET_MAC_CSR( (lp), HASHL, x ) #define SMC_GET_MII_ACC(lp, x) SMC_GET_MAC_CSR( (lp), MII_ACC, x ) #define SMC_SET_MII_ACC(lp, x) SMC_SET_MAC_CSR( (lp), MII_ACC, x ) #define SMC_GET_MII_DATA(lp, x) SMC_GET_MAC_CSR( (lp), MII_DATA, x ) #define SMC_SET_MII_DATA(lp, x) SMC_SET_MAC_CSR( (lp), MII_DATA, x ) #define SMC_GET_FLOW(lp, x) SMC_GET_MAC_CSR( (lp), FLOW, x ) #define SMC_SET_FLOW(lp, x) SMC_SET_MAC_CSR( (lp), FLOW, x ) #define SMC_GET_VLAN1(lp, x) SMC_GET_MAC_CSR( (lp), VLAN1, x ) #define SMC_SET_VLAN1(lp, x) SMC_SET_MAC_CSR( (lp), VLAN1, x ) #define SMC_GET_VLAN2(lp, x) SMC_GET_MAC_CSR( (lp), VLAN2, x ) #define SMC_SET_VLAN2(lp, x) SMC_SET_MAC_CSR( (lp), VLAN2, x ) #define SMC_SET_WUFF(lp, x) SMC_SET_MAC_CSR( (lp), WUFF, x ) #define SMC_GET_WUCSR(lp, x) SMC_GET_MAC_CSR( (lp), WUCSR, x ) #define SMC_SET_WUCSR(lp, x) SMC_SET_MAC_CSR( (lp), WUCSR, x ) /* PHY register read/write macros */ #define SMC_GET_MII(lp,a,phy,v) \ do { \ u32 __v; \ do { \ SMC_GET_MII_ACC((lp), __v); \ } while ( __v & MII_ACC_MII_BUSY_ ); \ SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) | \ MII_ACC_MII_BUSY_); \ do { \ SMC_GET_MII_ACC( (lp), __v); \ } while ( __v & MII_ACC_MII_BUSY_ ); \ SMC_GET_MII_DATA((lp), v); \ } while (0) #define SMC_SET_MII(lp,a,phy,v) \ do { \ u32 __v; \ do { \ SMC_GET_MII_ACC((lp), __v); \ } while ( __v & MII_ACC_MII_BUSY_ ); \ SMC_SET_MII_DATA((lp), v); \ SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) | \ MII_ACC_MII_BUSY_ | \ MII_ACC_MII_WRITE_ ); \ do { \ SMC_GET_MII_ACC((lp), __v); \ } while ( __v & MII_ACC_MII_BUSY_ ); \ } while (0) #define SMC_GET_PHY_BMCR(lp,phy,x) SMC_GET_MII( (lp), MII_BMCR, phy, x ) #define SMC_SET_PHY_BMCR(lp,phy,x) SMC_SET_MII( (lp), MII_BMCR, phy, x ) #define SMC_GET_PHY_BMSR(lp,phy,x) SMC_GET_MII( (lp), MII_BMSR, phy, x ) #define SMC_GET_PHY_ID1(lp,phy,x) SMC_GET_MII( (lp), MII_PHYSID1, phy, x ) #define SMC_GET_PHY_ID2(lp,phy,x) SMC_GET_MII( (lp), MII_PHYSID2, phy, x ) #define SMC_GET_PHY_MII_ADV(lp,phy,x) SMC_GET_MII( (lp), MII_ADVERTISE, phy, x ) #define SMC_SET_PHY_MII_ADV(lp,phy,x) SMC_SET_MII( (lp), MII_ADVERTISE, phy, x ) #define SMC_GET_PHY_MII_LPA(lp,phy,x) SMC_GET_MII( (lp), MII_LPA, phy, x ) #define SMC_SET_PHY_MII_LPA(lp,phy,x) SMC_SET_MII( (lp), MII_LPA, phy, x ) #define SMC_GET_PHY_CTRL_STS(lp,phy,x) SMC_GET_MII( (lp), PHY_MODE_CTRL_STS, phy, x ) #define SMC_SET_PHY_CTRL_STS(lp,phy,x) SMC_SET_MII( (lp), PHY_MODE_CTRL_STS, phy, x ) #define SMC_GET_PHY_INT_SRC(lp,phy,x) SMC_GET_MII( (lp), PHY_INT_SRC, phy, x ) #define SMC_SET_PHY_INT_SRC(lp,phy,x) SMC_SET_MII( (lp), PHY_INT_SRC, phy, x ) #define SMC_GET_PHY_INT_MASK(lp,phy,x) SMC_GET_MII( (lp), PHY_INT_MASK, phy, x ) #define SMC_SET_PHY_INT_MASK(lp,phy,x) SMC_SET_MII( (lp), PHY_INT_MASK, phy, x ) #define SMC_GET_PHY_SPECIAL(lp,phy,x) SMC_GET_MII( (lp), PHY_SPECIAL, phy, x ) /* Misc read/write macros */ #ifndef SMC_GET_MAC_ADDR #define SMC_GET_MAC_ADDR(lp, addr) \ do { \ unsigned int __v; \ \ SMC_GET_MAC_CSR((lp), ADDRL, __v); \ addr[0] = __v; addr[1] = __v >> 8; \ addr[2] = __v >> 16; addr[3] = __v >> 24; \ SMC_GET_MAC_CSR((lp), ADDRH, __v); \ addr[4] = __v; addr[5] = __v >> 8; \ } while (0) #endif #define SMC_SET_MAC_ADDR(lp, addr) \ do { \ SMC_SET_MAC_CSR((lp), ADDRL, \ addr[0] | \ (addr[1] << 8) | \ (addr[2] << 16) | \ (addr[3] << 24)); \ SMC_SET_MAC_CSR((lp), ADDRH, addr[4]|(addr[5] << 8));\ } while (0) #define SMC_WRITE_EEPROM_CMD(lp, cmd, addr) \ do { \ while (SMC_GET_E2P_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_R_NOT_W_ | a ); \ while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ } while (0) #endif /* _SMC911X_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1