| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds (pre-git) | 2664 | 59.06% | 11 | 20.75% |
| Andrew Morton | 978 | 21.68% | 3 | 5.66% |
| Linus Torvalds | 449 | 9.95% | 6 | 11.32% |
| Stephen Hemminger | 239 | 5.30% | 3 | 5.66% |
| Ben Boeckel | 36 | 0.80% | 1 | 1.89% |
| Alan Cox | 28 | 0.62% | 1 | 1.89% |
| Jiri Pirko | 18 | 0.40% | 4 | 7.55% |
| Frans Pop | 18 | 0.40% | 1 | 1.89% |
| Jeff Garzik | 18 | 0.40% | 2 | 3.77% |
| Randy Dunlap | 12 | 0.27% | 2 | 3.77% |
| Herbert Xu | 9 | 0.20% | 2 | 3.77% |
| Florian Westphal | 6 | 0.13% | 1 | 1.89% |
| David Howells | 6 | 0.13% | 1 | 1.89% |
| Wang Chen | 6 | 0.13% | 1 | 1.89% |
| Patrick McHardy | 5 | 0.11% | 2 | 3.77% |
| Arnaldo Carvalho de Melo | 5 | 0.11% | 1 | 1.89% |
| Pradeep A. Dalvi | 3 | 0.07% | 1 | 1.89% |
| Joe Perches | 3 | 0.07% | 3 | 5.66% |
| Kai Germaschewski | 2 | 0.04% | 1 | 1.89% |
| Eric Dumazet | 1 | 0.02% | 1 | 1.89% |
| Hannes Eder | 1 | 0.02% | 1 | 1.89% |
| Al Viro | 1 | 0.02% | 1 | 1.89% |
| Adrian Bunk | 1 | 0.02% | 1 | 1.89% |
| Johannes Berg | 1 | 0.02% | 1 | 1.89% |
| Duan Jiong | 1 | 0.02% | 1 | 1.89% |
| Total | 4511 | 53 |
/*------------------------------------------------------------------------ . smc9194.c . This is a driver for SMC's 9000 series of Ethernet cards. . . Copyright (C) 1996 by Erik Stahlman . This software may be used and distributed according to the terms . of the GNU General Public License, incorporated herein by reference. . . "Features" of the SMC chip: . 4608 byte packet memory. ( for the 91C92. Others have more ) . EEPROM for configuration . AUI/TP selection ( mine has 10Base2/10BaseT select ) . . Arguments: . io = for the base address . irq = for the IRQ . ifport = 0 for autodetect, 1 for TP, 2 for AUI ( or 10base2 ) . . author: . Erik Stahlman ( erik@vt.edu ) . contributors: . Arnaldo Carvalho de Melo <acme@conectiva.com.br> . . Hardware multicast code from Peter Cammaert ( pc@denkart.be ) . . Sources: . o SMC databook . o skeleton.c by Donald Becker ( becker@scyld.com ) . o ( a LOT of advice from Becker as well ) . . History: . 12/07/95 Erik Stahlman written, got receive/xmit handled . 01/03/96 Erik Stahlman worked out some bugs, actually usable!!! :-) . 01/06/96 Erik Stahlman cleaned up some, better testing, etc . 01/29/96 Erik Stahlman fixed autoirq, added multicast . 02/01/96 Erik Stahlman 1. disabled all interrupts in smc_reset . 2. got rid of post-decrementing bug -- UGH. . 02/13/96 Erik Stahlman Tried to fix autoirq failure. Added more . descriptive error messages. . 02/15/96 Erik Stahlman Fixed typo that caused detection failure . 02/23/96 Erik Stahlman Modified it to fit into kernel tree . Added support to change hardware address . Cleared stats on opens . 02/26/96 Erik Stahlman Trial support for Kernel 1.2.13 . Kludge for automatic IRQ detection . 03/04/96 Erik Stahlman Fixed kernel 1.3.70 + . Fixed bug reported by Gardner Buchanan in . smc_enable, with outw instead of outb . 03/06/96 Erik Stahlman Added hardware multicast from Peter Cammaert . 04/14/00 Heiko Pruessing (SMA Regelsysteme) Fixed bug in chip memory . allocation . 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet . 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ" . 11/08/01 Matt Domsch Use common crc32 function ----------------------------------------------------------------------------*/ static const char version[] = "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)"; #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/fcntl.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/in.h> #include <linux/string.h> #include <linux/init.h> #include <linux/crc32.h> #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/bitops.h> #include <asm/io.h> #include "smc9194.h" #define DRV_NAME "smc9194" /*------------------------------------------------------------------------ . . Configuration options, for the experienced user to change. . -------------------------------------------------------------------------*/ /* . Do you want to use 32 bit xfers? This should work on all chips, as . the chipset is designed to accommodate them. */ #ifdef __sh__ #undef USE_32_BIT #else #define USE_32_BIT 1 #endif /* .the SMC9194 can be at any of the following port addresses. To change, .for a slightly different card, you can add it to the array. Keep in .mind that the array must end in zero. */ struct devlist { unsigned int port; unsigned int irq; }; static struct devlist smc_devlist[] __initdata = { {.port = 0x200, .irq = 0}, {.port = 0x220, .irq = 0}, {.port = 0x240, .irq = 0}, {.port = 0x260, .irq = 0}, {.port = 0x280, .irq = 0}, {.port = 0x2A0, .irq = 0}, {.port = 0x2C0, .irq = 0}, {.port = 0x2E0, .irq = 0}, {.port = 0x300, .irq = 0}, {.port = 0x320, .irq = 0}, {.port = 0x340, .irq = 0}, {.port = 0x360, .irq = 0}, {.port = 0x380, .irq = 0}, {.port = 0x3A0, .irq = 0}, {.port = 0x3C0, .irq = 0}, {.port = 0x3E0, .irq = 0}, {.port = 0, .irq = 0}, }; /* . Wait time for memory to be free. This probably shouldn't be . tuned that much, as waiting for this means nothing else happens . in the system */ #define MEMORY_WAIT_TIME 16 /* . DEBUGGING LEVELS . . 0 for normal operation . 1 for slightly more details . >2 for various levels of increasingly useless information . 2 for interrupt tracking, status flags . 3 for packet dumps, etc. */ #define SMC_DEBUG 0 #if (SMC_DEBUG > 2 ) #define PRINTK3(x) printk x #else #define PRINTK3(x) #endif #if SMC_DEBUG > 1 #define PRINTK2(x) printk x #else #define PRINTK2(x) #endif #ifdef SMC_DEBUG #define PRINTK(x) printk x #else #define PRINTK(x) #endif /*------------------------------------------------------------------------ . . The internal workings of the driver. If you are changing anything . here with the SMC stuff, you should have the datasheet and known . what you are doing. . -------------------------------------------------------------------------*/ #define CARDNAME "SMC9194" /* store this information for the driver.. */ struct smc_local { /* If I have to wait until memory is available to send a packet, I will store the skbuff here, until I get the desired memory. Then, I'll send it out and free it. */ struct sk_buff * saved_skb; /* . This keeps track of how many packets that I have . sent out. When an TX_EMPTY interrupt comes, I know . that all of these have been sent. */ int packets_waiting; }; /*----------------------------------------------------------------- . . The driver can be entered at any of the following entry points. . .------------------------------------------------------------------ */ /* . This is called by register_netdev(). It is responsible for . checking the portlist for the SMC9000 series chipset. If it finds . one, then it will initialize the device, find the hardware information, . and sets up the appropriate device parameters. . NOTE: Interrupts are *OFF* when this procedure is called. . . NB:This shouldn't be static since it is referred to externally. */ struct net_device *smc_init(int unit); /* . The kernel calls this function when someone wants to use the device, . typically 'ifconfig ethX up'. */ static int smc_open(struct net_device *dev); /* . Our watchdog timed out. Called by the networking layer */ static void smc_timeout(struct net_device *dev); /* . This is called by the kernel in response to 'ifconfig ethX down'. It . is responsible for cleaning up everything that the open routine . does, and maybe putting the card into a powerdown state. */ static int smc_close(struct net_device *dev); /* . Finally, a call to set promiscuous mode ( for TCPDUMP and related . programs ) and multicast modes. */ static void smc_set_multicast_list(struct net_device *dev); /*--------------------------------------------------------------- . . Interrupt level calls.. . ----------------------------------------------------------------*/ /* . Handles the actual interrupt */ static irqreturn_t smc_interrupt(int irq, void *); /* . This is a separate procedure to handle the receipt of a packet, to . leave the interrupt code looking slightly cleaner */ static inline void smc_rcv( struct net_device *dev ); /* . This handles a TX interrupt, which is only called when an error . relating to a packet is sent. */ static inline void smc_tx( struct net_device * dev ); /* ------------------------------------------------------------ . . Internal routines . ------------------------------------------------------------ */ /* . Test if a given location contains a chip, trying to cause as . little damage as possible if it's not a SMC chip. */ static int smc_probe(struct net_device *dev, int ioaddr); /* . A rather simple routine to print out a packet for debugging purposes. */ #if SMC_DEBUG > 2 static void print_packet( byte *, int ); #endif #define tx_done(dev) 1 /* this is called to actually send the packet to the chip */ static void smc_hardware_send_packet( struct net_device * dev ); /* Since I am not sure if I will have enough room in the chip's ram . to store the packet, I call this routine, which either sends it . now, or generates an interrupt when the card is ready for the . packet */ static netdev_tx_t smc_wait_to_send_packet( struct sk_buff * skb, struct net_device *dev ); /* this does a soft reset on the device */ static void smc_reset( int ioaddr ); /* Enable Interrupts, Receive, and Transmit */ static void smc_enable( int ioaddr ); /* this puts the device in an inactive state */ static void smc_shutdown( int ioaddr ); /* This routine will find the IRQ of the driver if one is not . specified in the input to the device. */ static int smc_findirq( int ioaddr ); /* . Function: smc_reset( int ioaddr ) . Purpose: . This sets the SMC91xx chip to its normal state, hopefully from whatever . mess that any other DOS driver has put it in. . . Maybe I should reset more registers to defaults in here? SOFTRESET should . do that for me. . . Method: . 1. send a SOFT RESET . 2. wait for it to finish . 3. enable autorelease mode . 4. reset the memory management unit . 5. clear all interrupts . */ static void smc_reset( int ioaddr ) { /* This resets the registers mostly to defaults, but doesn't affect EEPROM. That seems unnecessary */ SMC_SELECT_BANK( 0 ); outw( RCR_SOFTRESET, ioaddr + RCR ); /* this should pause enough for the chip to be happy */ SMC_DELAY( ); /* Set the transmit and receive configuration registers to default values */ outw( RCR_CLEAR, ioaddr + RCR ); outw( TCR_CLEAR, ioaddr + TCR ); /* set the control register to automatically release successfully transmitted packets, to make the best use out of our limited memory */ SMC_SELECT_BANK( 1 ); outw( inw( ioaddr + CONTROL ) | CTL_AUTO_RELEASE , ioaddr + CONTROL ); /* Reset the MMU */ SMC_SELECT_BANK( 2 ); outw( MC_RESET, ioaddr + MMU_CMD ); /* Note: It doesn't seem that waiting for the MMU busy is needed here, but this is a place where future chipsets _COULD_ break. Be wary of issuing another MMU command right after this */ outb( 0, ioaddr + INT_MASK ); } /* . Function: smc_enable . Purpose: let the chip talk to the outside work . Method: . 1. Enable the transmitter . 2. Enable the receiver . 3. Enable interrupts */ static void smc_enable( int ioaddr ) { SMC_SELECT_BANK( 0 ); /* see the header file for options in TCR/RCR NORMAL*/ outw( TCR_NORMAL, ioaddr + TCR ); outw( RCR_NORMAL, ioaddr + RCR ); /* now, enable interrupts */ SMC_SELECT_BANK( 2 ); outb( SMC_INTERRUPT_MASK, ioaddr + INT_MASK ); } /* . Function: smc_shutdown . Purpose: closes down the SMC91xxx chip. . Method: . 1. zero the interrupt mask . 2. clear the enable receive flag . 3. clear the enable xmit flags . . TODO: . (1) maybe utilize power down mode. . Why not yet? Because while the chip will go into power down mode, . the manual says that it will wake up in response to any I/O requests . in the register space. Empirical results do not show this working. */ static void smc_shutdown( int ioaddr ) { /* no more interrupts for me */ SMC_SELECT_BANK( 2 ); outb( 0, ioaddr + INT_MASK ); /* and tell the card to stay away from that nasty outside world */ SMC_SELECT_BANK( 0 ); outb( RCR_CLEAR, ioaddr + RCR ); outb( TCR_CLEAR, ioaddr + TCR ); #if 0 /* finally, shut the chip down */ SMC_SELECT_BANK( 1 ); outw( inw( ioaddr + CONTROL ), CTL_POWERDOWN, ioaddr + CONTROL ); #endif } /* . Function: smc_setmulticast( int ioaddr, struct net_device *dev ) . Purpose: . This sets the internal hardware table to filter out unwanted multicast . packets before they take up memory. . . The SMC chip uses a hash table where the high 6 bits of the CRC of . address are the offset into the table. If that bit is 1, then the . multicast packet is accepted. Otherwise, it's dropped silently. . . To use the 6 bits as an offset into the table, the high 3 bits are the . number of the 8 bit register, while the low 3 bits are the bit within . that register. . . This routine is based very heavily on the one provided by Peter Cammaert. */ static void smc_setmulticast(int ioaddr, struct net_device *dev) { int i; unsigned char multicast_table[ 8 ]; struct netdev_hw_addr *ha; /* table for flipping the order of 3 bits */ unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 }; /* start with a table of all zeros: reject all */ memset( multicast_table, 0, sizeof( multicast_table ) ); netdev_for_each_mc_addr(ha, dev) { int position; /* only use the low order bits */ position = ether_crc_le(6, ha->addr) & 0x3f; /* do some messy swapping to put the bit in the right spot */ multicast_table[invert3[position&7]] |= (1<<invert3[(position>>3)&7]); } /* now, the table can be loaded into the chipset */ SMC_SELECT_BANK( 3 ); for ( i = 0; i < 8 ; i++ ) { outb( multicast_table[i], ioaddr + MULTICAST1 + i ); } } /* . Function: smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * ) . Purpose: . Attempt to allocate memory for a packet, if chip-memory is not . available, then tell the card to generate an interrupt when it . is available. . . Algorithm: . . o if the saved_skb is not currently null, then drop this packet . on the floor. This should never happen, because of TBUSY. . o if the saved_skb is null, then replace it with the current packet, . o See if I can sending it now. . o (NO): Enable interrupts and let the interrupt handler deal with it. . o (YES):Send it now. */ static netdev_tx_t smc_wait_to_send_packet(struct sk_buff *skb, struct net_device *dev) { struct smc_local *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; word length; unsigned short numPages; word time_out; netif_stop_queue(dev); /* Well, I want to send the packet.. but I don't know if I can send it right now... */ if ( lp->saved_skb) { /* THIS SHOULD NEVER HAPPEN. */ dev->stats.tx_aborted_errors++; printk(CARDNAME": Bad Craziness - sent packet while busy.\n" ); return NETDEV_TX_BUSY; } lp->saved_skb = skb; length = skb->len; if (length < ETH_ZLEN) { if (skb_padto(skb, ETH_ZLEN)) { netif_wake_queue(dev); return NETDEV_TX_OK; } length = ETH_ZLEN; } /* ** The MMU wants the number of pages to be the number of 256 bytes ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) ) ** ** Pkt size for allocating is data length +6 (for additional status words, ** length and ctl!) If odd size last byte is included in this header. */ numPages = ((length & 0xfffe) + 6) / 256; if (numPages > 7 ) { printk(CARDNAME": Far too big packet error.\n"); /* freeing the packet is a good thing here... but should . any packets of this size get down here? */ dev_kfree_skb (skb); lp->saved_skb = NULL; /* this IS an error, but, i don't want the skb saved */ netif_wake_queue(dev); return NETDEV_TX_OK; } /* either way, a packet is waiting now */ lp->packets_waiting++; /* now, try to allocate the memory */ SMC_SELECT_BANK( 2 ); outw( MC_ALLOC | numPages, ioaddr + MMU_CMD ); /* . Performance Hack . . wait a short amount of time.. if I can send a packet now, I send . it now. Otherwise, I enable an interrupt and wait for one to be . available. . . I could have handled this a slightly different way, by checking to . see if any memory was available in the FREE MEMORY register. However, . either way, I need to generate an allocation, and the allocation works . no matter what, so I saw no point in checking free memory. */ time_out = MEMORY_WAIT_TIME; do { word status; status = inb( ioaddr + INTERRUPT ); if ( status & IM_ALLOC_INT ) { /* acknowledge the interrupt */ outb( IM_ALLOC_INT, ioaddr + INTERRUPT ); break; } } while ( -- time_out ); if ( !time_out ) { /* oh well, wait until the chip finds memory later */ SMC_ENABLE_INT( IM_ALLOC_INT ); PRINTK2((CARDNAME": memory allocation deferred.\n")); /* it's deferred, but I'll handle it later */ return NETDEV_TX_OK; } /* or YES! I can send the packet now.. */ smc_hardware_send_packet(dev); netif_wake_queue(dev); return NETDEV_TX_OK; } /* . Function: smc_hardware_send_packet(struct net_device * ) . Purpose: . This sends the actual packet to the SMC9xxx chip. . . Algorithm: . First, see if a saved_skb is available. . ( this should NOT be called if there is no 'saved_skb' . Now, find the packet number that the chip allocated . Point the data pointers at it in memory . Set the length word in the chip's memory . Dump the packet to chip memory . Check if a last byte is needed ( odd length packet ) . if so, set the control flag right . Tell the card to send it . Enable the transmit interrupt, so I know if it failed . Free the kernel data if I actually sent it. */ static void smc_hardware_send_packet( struct net_device * dev ) { struct smc_local *lp = netdev_priv(dev); byte packet_no; struct sk_buff * skb = lp->saved_skb; word length; unsigned int ioaddr; byte * buf; ioaddr = dev->base_addr; if ( !skb ) { PRINTK((CARDNAME": In XMIT with no packet to send\n")); return; } length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; buf = skb->data; /* If I get here, I _know_ there is a packet slot waiting for me */ packet_no = inb( ioaddr + PNR_ARR + 1 ); if ( packet_no & 0x80 ) { /* or isn't there? BAD CHIP! */ netdev_dbg(dev, CARDNAME": Memory allocation failed.\n"); dev_kfree_skb_any(skb); lp->saved_skb = NULL; netif_wake_queue(dev); return; } /* we have a packet address, so tell the card to use it */ outb( packet_no, ioaddr + PNR_ARR ); /* point to the beginning of the packet */ outw( PTR_AUTOINC , ioaddr + POINTER ); PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length)); #if SMC_DEBUG > 2 print_packet( buf, length ); #endif /* send the packet length ( +6 for status, length and ctl byte ) and the status word ( set to zeros ) */ #ifdef USE_32_BIT outl( (length +6 ) << 16 , ioaddr + DATA_1 ); #else outw( 0, ioaddr + DATA_1 ); /* send the packet length ( +6 for status words, length, and ctl*/ outb( (length+6) & 0xFF,ioaddr + DATA_1 ); outb( (length+6) >> 8 , ioaddr + DATA_1 ); #endif /* send the actual data . I _think_ it's faster to send the longs first, and then . mop up by sending the last word. It depends heavily . on alignment, at least on the 486. Maybe it would be . a good idea to check which is optimal? But that could take . almost as much time as is saved? */ #ifdef USE_32_BIT if ( length & 0x2 ) { outsl(ioaddr + DATA_1, buf, length >> 2 ); outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1); } else outsl(ioaddr + DATA_1, buf, length >> 2 ); #else outsw(ioaddr + DATA_1 , buf, (length ) >> 1); #endif /* Send the last byte, if there is one. */ if ( (length & 1) == 0 ) { outw( 0, ioaddr + DATA_1 ); } else { outb( buf[length -1 ], ioaddr + DATA_1 ); outb( 0x20, ioaddr + DATA_1); } /* enable the interrupts */ SMC_ENABLE_INT( (IM_TX_INT | IM_TX_EMPTY_INT) ); /* and let the chipset deal with it */ outw( MC_ENQUEUE , ioaddr + MMU_CMD ); PRINTK2((CARDNAME": Sent packet of length %d\n", length)); lp->saved_skb = NULL; dev_kfree_skb_any (skb); netif_trans_update(dev); /* we can send another packet */ netif_wake_queue(dev); } /*------------------------------------------------------------------------- | | smc_init(int unit) | Input parameters: | dev->base_addr == 0, try to find all possible locations | dev->base_addr == 1, return failure code | dev->base_addr == 2, always allocate space, and return success | dev->base_addr == <anything else> this is the address to check | | Output: | pointer to net_device or ERR_PTR(error) | --------------------------------------------------------------------------- */ static int io; static int irq; static int ifport; struct net_device * __init smc_init(int unit) { struct net_device *dev = alloc_etherdev(sizeof(struct smc_local)); struct devlist *smcdev = smc_devlist; int err = 0; if (!dev) return ERR_PTR(-ENODEV); if (unit >= 0) { sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); io = dev->base_addr; irq = dev->irq; } if (io > 0x1ff) { /* Check a single specified location. */ err = smc_probe(dev, io); } else if (io != 0) { /* Don't probe at all. */ err = -ENXIO; } else { for (;smcdev->port; smcdev++) { if (smc_probe(dev, smcdev->port) == 0) break; } if (!smcdev->port) err = -ENODEV; } if (err) goto out; err = register_netdev(dev); if (err) goto out1; return dev; out1: free_irq(dev->irq, dev); release_region(dev->base_addr, SMC_IO_EXTENT); out: free_netdev(dev); return ERR_PTR(err); } /*---------------------------------------------------------------------- . smc_findirq . . This routine has a simple purpose -- make the SMC chip generate an . interrupt, so an auto-detect routine can detect it, and find the IRQ, ------------------------------------------------------------------------ */ static int __init smc_findirq(int ioaddr) { #ifndef NO_AUTOPROBE int timeout = 20; unsigned long cookie; cookie = probe_irq_on(); /* * What I try to do here is trigger an ALLOC_INT. This is done * by allocating a small chunk of memory, which will give an interrupt * when done. */ SMC_SELECT_BANK(2); /* enable ALLOCation interrupts ONLY */ outb( IM_ALLOC_INT, ioaddr + INT_MASK ); /* . Allocate 512 bytes of memory. Note that the chip was just . reset so all the memory is available */ outw( MC_ALLOC | 1, ioaddr + MMU_CMD ); /* . Wait until positive that the interrupt has been generated */ while ( timeout ) { byte int_status; int_status = inb( ioaddr + INTERRUPT ); if ( int_status & IM_ALLOC_INT ) break; /* got the interrupt */ timeout--; } /* there is really nothing that I can do here if timeout fails, as probe_irq_off will return a 0 anyway, which is what I want in this case. Plus, the clean up is needed in both cases. */ /* DELAY HERE! On a fast machine, the status might change before the interrupt is given to the processor. This means that the interrupt was never detected, and probe_irq_off fails to report anything. This should fix probe_irq_* problems. */ SMC_DELAY(); SMC_DELAY(); /* and disable all interrupts again */ outb( 0, ioaddr + INT_MASK ); /* and return what I found */ return probe_irq_off(cookie); #else /* NO_AUTOPROBE */ struct devlist *smcdev; for (smcdev = smc_devlist; smcdev->port; smcdev++) { if (smcdev->port == ioaddr) return smcdev->irq; } return 0; #endif } static const struct net_device_ops smc_netdev_ops = { .ndo_open = smc_open, .ndo_stop = smc_close, .ndo_start_xmit = smc_wait_to_send_packet, .ndo_tx_timeout = smc_timeout, .ndo_set_rx_mode = smc_set_multicast_list, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, }; /*---------------------------------------------------------------------- . Function: smc_probe( int ioaddr ) . . Purpose: . Tests to see if a given ioaddr points to an SMC9xxx chip. . Returns a 0 on success . . Algorithm: . (1) see if the high byte of BANK_SELECT is 0x33 . (2) compare the ioaddr with the base register's address . (3) see if I recognize the chip ID in the appropriate register . .--------------------------------------------------------------------- */ /*--------------------------------------------------------------- . Here I do typical initialization tasks. . . o Initialize the structure if needed . o print out my vanity message if not done so already . o print out what type of hardware is detected . o print out the ethernet address . o find the IRQ . o set up my private data . o configure the dev structure with my subroutines . o actually GRAB the irq. . o GRAB the region .----------------------------------------------------------------- */ static int __init smc_probe(struct net_device *dev, int ioaddr) { int i, memory, retval; unsigned int bank; const char *version_string; const char *if_string; /* registers */ word revision_register; word base_address_register; word configuration_register; word memory_info_register; word memory_cfg_register; /* Grab the region so that no one else tries to probe our ioports. */ if (!request_region(ioaddr, SMC_IO_EXTENT, DRV_NAME)) return -EBUSY; dev->irq = irq; dev->if_port = ifport; /* First, see if the high byte is 0x33 */ bank = inw( ioaddr + BANK_SELECT ); if ( (bank & 0xFF00) != 0x3300 ) { retval = -ENODEV; goto err_out; } /* The above MIGHT indicate a device, but I need to write to further test this. */ outw( 0x0, ioaddr + BANK_SELECT ); bank = inw( ioaddr + BANK_SELECT ); if ( (bank & 0xFF00 ) != 0x3300 ) { retval = -ENODEV; goto err_out; } /* well, we've already written once, so hopefully another time won't hurt. This time, I need to switch the bank register to bank 1, so I can access the base address register */ SMC_SELECT_BANK(1); base_address_register = inw( ioaddr + BASE ); if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) ) { printk(CARDNAME ": IOADDR %x doesn't match configuration (%x). " "Probably not a SMC chip\n", ioaddr, base_address_register >> 3 & 0x3E0 ); /* well, the base address register didn't match. Must not have been a SMC chip after all. */ retval = -ENODEV; goto err_out; } /* check if the revision register is something that I recognize. These might need to be added to later, as future revisions could be added. */ SMC_SELECT_BANK(3); revision_register = inw( ioaddr + REVISION ); if ( !chip_ids[ ( revision_register >> 4 ) & 0xF ] ) { /* I don't recognize this chip, so... */ printk(CARDNAME ": IO %x: Unrecognized revision register:" " %x, Contact author.\n", ioaddr, revision_register); retval = -ENODEV; goto err_out; } /* at this point I'll assume that the chip is an SMC9xxx. It might be prudent to check a listing of MAC addresses against the hardware address, or do some other tests. */ pr_info_once("%s\n", version); /* fill in some of the fields */ dev->base_addr = ioaddr; /* . Get the MAC address ( bank 1, regs 4 - 9 ) */ SMC_SELECT_BANK( 1 ); for ( i = 0; i < 6; i += 2 ) { word address; address = inw( ioaddr + ADDR0 + i ); dev->dev_addr[ i + 1] = address >> 8; dev->dev_addr[ i ] = address & 0xFF; } /* get the memory information */ SMC_SELECT_BANK( 0 ); memory_info_register = inw( ioaddr + MIR ); memory_cfg_register = inw( ioaddr + MCR ); memory = ( memory_cfg_register >> 9 ) & 0x7; /* multiplier */ memory *= 256 * ( memory_info_register & 0xFF ); /* Now, I want to find out more about the chip. This is sort of redundant, but it's cleaner to have it in both, rather than having one VERY long probe procedure. */ SMC_SELECT_BANK(3); revision_register = inw( ioaddr + REVISION ); version_string = chip_ids[ ( revision_register >> 4 ) & 0xF ]; if ( !version_string ) { /* I shouldn't get here because this call was done before.... */ retval = -ENODEV; goto err_out; } /* is it using AUI or 10BaseT ? */ if ( dev->if_port == 0 ) { SMC_SELECT_BANK(1); configuration_register = inw( ioaddr + CONFIG ); if ( configuration_register & CFG_AUI_SELECT ) dev->if_port = 2; else dev->if_port = 1; } if_string = interfaces[ dev->if_port - 1 ]; /* now, reset the chip, and put it into a known state */ smc_reset( ioaddr ); /* . If dev->irq is 0, then the device has to be banged on to see . what the IRQ is. . . This banging doesn't always detect the IRQ, for unknown reasons. . a workaround is to reset the chip and try again. . . Interestingly, the DOS packet driver *SETS* the IRQ on the card to . be what is requested on the command line. I don't do that, mostly . because the card that I have uses a non-standard method of accessing . the IRQs, and because this _should_ work in most configurations. . . Specifying an IRQ is done with the assumption that the user knows . what (s)he is doing. No checking is done!!!! . */ if ( dev->irq < 2 ) { int trials; trials = 3; while ( trials-- ) { dev->irq = smc_findirq( ioaddr ); if ( dev->irq ) break; /* kick the card and try again */ smc_reset( ioaddr ); } } if (dev->irq == 0 ) { printk(CARDNAME": Couldn't autodetect your IRQ. Use irq=xx.\n"); retval = -ENODEV; goto err_out; } /* now, print out the card info, in a short format.. */ netdev_info(dev, "%s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", version_string, revision_register & 0xF, ioaddr, dev->irq, if_string, memory); /* . Print the Ethernet address */ netdev_info(dev, "ADDR: %pM\n", dev->dev_addr); /* Grab the IRQ */ retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev); if (retval) { netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME, dev->irq, retval); goto err_out; } dev->netdev_ops = &smc_netdev_ops; dev->watchdog_timeo = HZ/20; return 0; err_out: release_region(ioaddr, SMC_IO_EXTENT); return retval; } #if SMC_DEBUG > 2 static void print_packet( byte * buf, int length ) { #if 0 print_hex_dump_debug(DRV_NAME, DUMP_PREFIX_OFFSET, 16, 1, buf, length, true); #endif } #endif /* * Open and Initialize the board * * Set up everything, reset the card, etc .. * */ static int smc_open(struct net_device *dev) { int ioaddr = dev->base_addr; int i; /* used to set hw ethernet address */ /* clear out all the junk that was put here before... */ memset(netdev_priv(dev), 0, sizeof(struct smc_local)); /* reset the hardware */ smc_reset( ioaddr ); smc_enable( ioaddr ); /* Select which interface to use */ SMC_SELECT_BANK( 1 ); if ( dev->if_port == 1 ) { outw( inw( ioaddr + CONFIG ) & ~CFG_AUI_SELECT, ioaddr + CONFIG ); } else if ( dev->if_port == 2 ) { outw( inw( ioaddr + CONFIG ) | CFG_AUI_SELECT, ioaddr + CONFIG ); } /* According to Becker, I have to set the hardware address at this point, because the (l)user can set it with an ioctl. Easily done... */ SMC_SELECT_BANK( 1 ); for ( i = 0; i < 6; i += 2 ) { word address; address = dev->dev_addr[ i + 1 ] << 8 ; address |= dev->dev_addr[ i ]; outw( address, ioaddr + ADDR0 + i ); } netif_start_queue(dev); return 0; } /*-------------------------------------------------------- . Called by the kernel to send a packet out into the void . of the net. This routine is largely based on . skeleton.c, from Becker. .-------------------------------------------------------- */ static void smc_timeout(struct net_device *dev) { /* If we get here, some higher level has decided we are broken. There should really be a "kick me" function call instead. */ netdev_warn(dev, CARDNAME": transmit timed out, %s?\n", tx_done(dev) ? "IRQ conflict" : "network cable problem"); /* "kick" the adaptor */ smc_reset( dev->base_addr ); smc_enable( dev->base_addr ); netif_trans_update(dev); /* prevent tx timeout */ /* clear anything saved */ ((struct smc_local *)netdev_priv(dev))->saved_skb = NULL; netif_wake_queue(dev); } /*------------------------------------------------------------- . . smc_rcv - receive a packet from the card . . There is ( at least ) a packet waiting to be read from . chip-memory. . . o Read the status . o If an error, record it . o otherwise, read in the packet -------------------------------------------------------------- */ static void smc_rcv(struct net_device *dev) { int ioaddr = dev->base_addr; int packet_number; word status; word packet_length; /* assume bank 2 */ packet_number = inw( ioaddr + FIFO_PORTS ); if ( packet_number & FP_RXEMPTY ) { /* we got called , but nothing was on the FIFO */ PRINTK((CARDNAME ": WARNING: smc_rcv with nothing on FIFO.\n")); /* don't need to restore anything */ return; } /* start reading from the start of the packet */ outw( PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER ); /* First two words are status and packet_length */ status = inw( ioaddr + DATA_1 ); packet_length = inw( ioaddr + DATA_1 ); packet_length &= 0x07ff; /* mask off top bits */ PRINTK2(("RCV: STATUS %4x LENGTH %4x\n", status, packet_length )); /* . the packet length contains 3 extra words : . status, length, and an extra word with an odd byte . */ packet_length -= 6; if ( !(status & RS_ERRORS ) ){ /* do stuff to make a new packet */ struct sk_buff * skb; byte * data; /* read one extra byte */ if ( status & RS_ODDFRAME ) packet_length++; /* set multicast stats */ if ( status & RS_MULTICAST ) dev->stats.multicast++; skb = netdev_alloc_skb(dev, packet_length + 5); if ( skb == NULL ) { dev->stats.rx_dropped++; goto done; } /* ! This should work without alignment, but it could be ! in the worse case */ skb_reserve( skb, 2 ); /* 16 bit alignment */ data = skb_put( skb, packet_length); #ifdef USE_32_BIT /* QUESTION: Like in the TX routine, do I want to send the DWORDs or the bytes first, or some mixture. A mixture might improve already slow PIO performance */ PRINTK3((" Reading %d dwords (and %d bytes)\n", packet_length >> 2, packet_length & 3 )); insl(ioaddr + DATA_1 , data, packet_length >> 2 ); /* read the left over bytes */ insb( ioaddr + DATA_1, data + (packet_length & 0xFFFFFC), packet_length & 0x3 ); #else PRINTK3((" Reading %d words and %d byte(s)\n", (packet_length >> 1 ), packet_length & 1 )); insw(ioaddr + DATA_1 , data, packet_length >> 1); if ( packet_length & 1 ) { data += packet_length & ~1; *(data++) = inb( ioaddr + DATA_1 ); } #endif #if SMC_DEBUG > 2 print_packet( data, packet_length ); #endif skb->protocol = eth_type_trans(skb, dev ); netif_rx(skb); dev->stats.rx_packets++; dev->stats.rx_bytes += packet_length; } else { /* error ... */ dev->stats.rx_errors++; if ( status & RS_ALGNERR ) dev->stats.rx_frame_errors++; if ( status & (RS_TOOSHORT | RS_TOOLONG ) ) dev->stats.rx_length_errors++; if ( status & RS_BADCRC) dev->stats.rx_crc_errors++; } done: /* error or good, tell the card to get rid of this packet */ outw( MC_RELEASE, ioaddr + MMU_CMD ); } /************************************************************************* . smc_tx . . Purpose: Handle a transmit error message. This will only be called . when an error, because of the AUTO_RELEASE mode. . . Algorithm: . Save pointer and packet no . Get the packet no from the top of the queue . check if it's valid ( if not, is this an error??? ) . read the status word . record the error . ( resend? Not really, since we don't want old packets around ) . Restore saved values ************************************************************************/ static void smc_tx( struct net_device * dev ) { int ioaddr = dev->base_addr; struct smc_local *lp = netdev_priv(dev); byte saved_packet; byte packet_no; word tx_status; /* assume bank 2 */ saved_packet = inb( ioaddr + PNR_ARR ); packet_no = inw( ioaddr + FIFO_PORTS ); packet_no &= 0x7F; /* select this as the packet to read from */ outb( packet_no, ioaddr + PNR_ARR ); /* read the first word from this packet */ outw( PTR_AUTOINC | PTR_READ, ioaddr + POINTER ); tx_status = inw( ioaddr + DATA_1 ); PRINTK3((CARDNAME": TX DONE STATUS: %4x\n", tx_status)); dev->stats.tx_errors++; if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++; if ( tx_status & TS_LATCOL ) { netdev_dbg(dev, CARDNAME": Late collision occurred on last xmit.\n"); dev->stats.tx_window_errors++; } #if 0 if ( tx_status & TS_16COL ) { ... } #endif if ( tx_status & TS_SUCCESS ) { netdev_info(dev, CARDNAME": Successful packet caused interrupt\n"); } /* re-enable transmit */ SMC_SELECT_BANK( 0 ); outw( inw( ioaddr + TCR ) | TCR_ENABLE, ioaddr + TCR ); /* kill the packet */ SMC_SELECT_BANK( 2 ); outw( MC_FREEPKT, ioaddr + MMU_CMD ); /* one less packet waiting for me */ lp->packets_waiting--; outb( saved_packet, ioaddr + PNR_ARR ); } /*-------------------------------------------------------------------- . . This is the main routine of the driver, to handle the device when . it needs some attention. . . So: . first, save state of the chipset . branch off into routines to handle each case, and acknowledge . each to the interrupt register . and finally restore state. . ---------------------------------------------------------------------*/ static irqreturn_t smc_interrupt(int irq, void * dev_id) { struct net_device *dev = dev_id; int ioaddr = dev->base_addr; struct smc_local *lp = netdev_priv(dev); byte status; word card_stats; byte mask; int timeout; /* state registers */ word saved_bank; word saved_pointer; int handled = 0; PRINTK3((CARDNAME": SMC interrupt started\n")); saved_bank = inw( ioaddr + BANK_SELECT ); SMC_SELECT_BANK(2); saved_pointer = inw( ioaddr + POINTER ); mask = inb( ioaddr + INT_MASK ); /* clear all interrupts */ outb( 0, ioaddr + INT_MASK ); /* set a timeout value, so I don't stay here forever */ timeout = 4; PRINTK2((KERN_WARNING CARDNAME ": MASK IS %x\n", mask)); do { /* read the status flag, and mask it */ status = inb( ioaddr + INTERRUPT ) & mask; if (!status ) break; handled = 1; PRINTK3((KERN_WARNING CARDNAME ": Handling interrupt status %x\n", status)); if (status & IM_RCV_INT) { /* Got a packet(s). */ PRINTK2((KERN_WARNING CARDNAME ": Receive Interrupt\n")); smc_rcv(dev); } else if (status & IM_TX_INT ) { PRINTK2((KERN_WARNING CARDNAME ": TX ERROR handled\n")); smc_tx(dev); outb(IM_TX_INT, ioaddr + INTERRUPT ); } else if (status & IM_TX_EMPTY_INT ) { /* update stats */ SMC_SELECT_BANK( 0 ); card_stats = inw( ioaddr + COUNTER ); /* single collisions */ dev->stats.collisions += card_stats & 0xF; card_stats >>= 4; /* multiple collisions */ dev->stats.collisions += card_stats & 0xF; /* these are for when linux supports these statistics */ SMC_SELECT_BANK( 2 ); PRINTK2((KERN_WARNING CARDNAME ": TX_BUFFER_EMPTY handled\n")); outb( IM_TX_EMPTY_INT, ioaddr + INTERRUPT ); mask &= ~IM_TX_EMPTY_INT; dev->stats.tx_packets += lp->packets_waiting; lp->packets_waiting = 0; } else if (status & IM_ALLOC_INT ) { PRINTK2((KERN_DEBUG CARDNAME ": Allocation interrupt\n")); /* clear this interrupt so it doesn't happen again */ mask &= ~IM_ALLOC_INT; smc_hardware_send_packet( dev ); /* enable xmit interrupts based on this */ mask |= ( IM_TX_EMPTY_INT | IM_TX_INT ); /* and let the card send more packets to me */ netif_wake_queue(dev); PRINTK2((CARDNAME": Handoff done successfully.\n")); } else if (status & IM_RX_OVRN_INT ) { dev->stats.rx_errors++; dev->stats.rx_fifo_errors++; outb( IM_RX_OVRN_INT, ioaddr + INTERRUPT ); } else if (status & IM_EPH_INT ) { PRINTK((CARDNAME ": UNSUPPORTED: EPH INTERRUPT\n")); } else if (status & IM_ERCV_INT ) { PRINTK((CARDNAME ": UNSUPPORTED: ERCV INTERRUPT\n")); outb( IM_ERCV_INT, ioaddr + INTERRUPT ); } } while ( timeout -- ); /* restore state register */ SMC_SELECT_BANK( 2 ); outb( mask, ioaddr + INT_MASK ); PRINTK3((KERN_WARNING CARDNAME ": MASK is now %x\n", mask)); outw( saved_pointer, ioaddr + POINTER ); SMC_SELECT_BANK( saved_bank ); PRINTK3((CARDNAME ": Interrupt done\n")); return IRQ_RETVAL(handled); } /*---------------------------------------------------- . smc_close . . this makes the board clean up everything that it can . and not talk to the outside world. Caused by . an 'ifconfig ethX down' . -----------------------------------------------------*/ static int smc_close(struct net_device *dev) { netif_stop_queue(dev); /* clear everything */ smc_shutdown( dev->base_addr ); /* Update the statistics here. */ return 0; } /*----------------------------------------------------------- . smc_set_multicast_list . . This routine will, depending on the values passed to it, . either make it accept multicast packets, go into . promiscuous mode ( for TCPDUMP and cousins ) or accept . a select set of multicast packets */ static void smc_set_multicast_list(struct net_device *dev) { short ioaddr = dev->base_addr; SMC_SELECT_BANK(0); if ( dev->flags & IFF_PROMISC ) outw( inw(ioaddr + RCR ) | RCR_PROMISC, ioaddr + RCR ); /* BUG? I never disable promiscuous mode if multicasting was turned on. Now, I turn off promiscuous mode, but I don't do anything to multicasting when promiscuous mode is turned on. */ /* Here, I am setting this to accept all multicast packets. I don't need to zero the multicast table, because the flag is checked before the table is */ else if (dev->flags & IFF_ALLMULTI) outw( inw(ioaddr + RCR ) | RCR_ALMUL, ioaddr + RCR ); /* We just get all multicast packets even if we only want them . from one source. This will be changed at some future . point. */ else if (!netdev_mc_empty(dev)) { /* support hardware multicasting */ /* be sure I get rid of flags I might have set */ outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL), ioaddr + RCR ); /* NOTE: this has to set the bank, so make sure it is the last thing called. The bank is set to zero at the top */ smc_setmulticast(ioaddr, dev); } else { outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL), ioaddr + RCR ); /* since I'm disabling all multicast entirely, I need to clear the multicast list */ SMC_SELECT_BANK( 3 ); outw( 0, ioaddr + MULTICAST1 ); outw( 0, ioaddr + MULTICAST2 ); outw( 0, ioaddr + MULTICAST3 ); outw( 0, ioaddr + MULTICAST4 ); } } #ifdef MODULE static struct net_device *devSMC9194; MODULE_LICENSE("GPL"); module_param_hw(io, int, ioport, 0); module_param_hw(irq, int, irq, 0); module_param(ifport, int, 0); MODULE_PARM_DESC(io, "SMC 99194 I/O base address"); MODULE_PARM_DESC(irq, "SMC 99194 IRQ number"); MODULE_PARM_DESC(ifport, "SMC 99194 interface port (0-default, 1-TP, 2-AUI)"); int __init init_module(void) { if (io == 0) printk(KERN_WARNING CARDNAME": You shouldn't use auto-probing with insmod!\n" ); /* copy the parameters from insmod into the device structure */ devSMC9194 = smc_init(-1); return PTR_ERR_OR_ZERO(devSMC9194); } void __exit cleanup_module(void) { unregister_netdev(devSMC9194); free_irq(devSMC9194->irq, devSMC9194); release_region(devSMC9194->base_addr, SMC_IO_EXTENT); free_netdev(devSMC9194); } #endif /* MODULE */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1