Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dinh Nguyen | 419 | 25.35% | 2 | 8.00% |
Tien Hock Loh | 408 | 24.68% | 1 | 4.00% |
Joachim Eastwood | 340 | 20.57% | 8 | 32.00% |
Ley Foon Tan | 220 | 13.31% | 1 | 4.00% |
Phil Reid | 93 | 5.63% | 2 | 8.00% |
Peter Chen | 68 | 4.11% | 1 | 4.00% |
Johan Hovold | 58 | 3.51% | 2 | 8.00% |
Marek Vašut | 12 | 0.73% | 1 | 4.00% |
Stephan Gatzka | 12 | 0.73% | 1 | 4.00% |
Wei Yongjun | 10 | 0.60% | 2 | 8.00% |
Vince Bridgers | 6 | 0.36% | 1 | 4.00% |
Andy Shevchenko | 3 | 0.18% | 1 | 4.00% |
Philippe Reynes | 2 | 0.12% | 1 | 4.00% |
Joao Pinto | 2 | 0.12% | 1 | 4.00% |
Total | 1653 | 25 |
/* Copyright Altera Corporation (C) 2014. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2, * as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * * Adopted from dwmac-sti.c */ #include <linux/mfd/syscon.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_net.h> #include <linux/phy.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/stmmac.h> #include "stmmac.h" #include "stmmac_platform.h" #include "altr_tse_pcs.h" #define SGMII_ADAPTER_CTRL_REG 0x00 #define SGMII_ADAPTER_DISABLE 0x0001 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 #define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2 #define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003 #define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010 #define SYSMGR_FPGAGRP_MODULE_REG 0x00000028 #define SYSMGR_FPGAGRP_MODULE_EMAC 0x00000004 #define EMAC_SPLITTER_CTRL_REG 0x0 #define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3 #define EMAC_SPLITTER_CTRL_SPEED_10 0x2 #define EMAC_SPLITTER_CTRL_SPEED_100 0x3 #define EMAC_SPLITTER_CTRL_SPEED_1000 0x0 struct socfpga_dwmac { int interface; u32 reg_offset; u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; struct reset_control *stmmac_rst; struct reset_control *stmmac_ocp_rst; void __iomem *splitter_base; bool f2h_ptp_ref_clk; struct tse_pcs pcs; }; static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed) { struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv; void __iomem *splitter_base = dwmac->splitter_base; void __iomem *tse_pcs_base = dwmac->pcs.tse_pcs_base; void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base; struct device *dev = dwmac->dev; struct net_device *ndev = dev_get_drvdata(dev); struct phy_device *phy_dev = ndev->phydev; u32 val; if ((tse_pcs_base) && (sgmii_adapter_base)) writew(SGMII_ADAPTER_DISABLE, sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); if (splitter_base) { val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG); val &= ~EMAC_SPLITTER_CTRL_SPEED_MASK; switch (speed) { case 1000: val |= EMAC_SPLITTER_CTRL_SPEED_1000; break; case 100: val |= EMAC_SPLITTER_CTRL_SPEED_100; break; case 10: val |= EMAC_SPLITTER_CTRL_SPEED_10; break; default: return; } writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG); } if (tse_pcs_base && sgmii_adapter_base) tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed); } static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev) { struct device_node *np = dev->of_node; struct regmap *sys_mgr_base_addr; u32 reg_offset, reg_shift; int ret, index; struct device_node *np_splitter = NULL; struct device_node *np_sgmii_adapter = NULL; struct resource res_splitter; struct resource res_tse_pcs; struct resource res_sgmii_adapter; dwmac->interface = of_get_phy_mode(np); sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); if (IS_ERR(sys_mgr_base_addr)) { dev_info(dev, "No sysmgr-syscon node found\n"); return PTR_ERR(sys_mgr_base_addr); } ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, ®_offset); if (ret) { dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n"); return -EINVAL; } ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, ®_shift); if (ret) { dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n"); return -EINVAL; } dwmac->f2h_ptp_ref_clk = of_property_read_bool(np, "altr,f2h_ptp_ref_clk"); np_splitter = of_parse_phandle(np, "altr,emac-splitter", 0); if (np_splitter) { ret = of_address_to_resource(np_splitter, 0, &res_splitter); of_node_put(np_splitter); if (ret) { dev_info(dev, "Missing emac splitter address\n"); return -EINVAL; } dwmac->splitter_base = devm_ioremap_resource(dev, &res_splitter); if (IS_ERR(dwmac->splitter_base)) { dev_info(dev, "Failed to mapping emac splitter\n"); return PTR_ERR(dwmac->splitter_base); } } np_sgmii_adapter = of_parse_phandle(np, "altr,gmii-to-sgmii-converter", 0); if (np_sgmii_adapter) { index = of_property_match_string(np_sgmii_adapter, "reg-names", "hps_emac_interface_splitter_avalon_slave"); if (index >= 0) { if (of_address_to_resource(np_sgmii_adapter, index, &res_splitter)) { dev_err(dev, "%s: ERROR: missing emac splitter address\n", __func__); ret = -EINVAL; goto err_node_put; } dwmac->splitter_base = devm_ioremap_resource(dev, &res_splitter); if (IS_ERR(dwmac->splitter_base)) { ret = PTR_ERR(dwmac->splitter_base); goto err_node_put; } } index = of_property_match_string(np_sgmii_adapter, "reg-names", "gmii_to_sgmii_adapter_avalon_slave"); if (index >= 0) { if (of_address_to_resource(np_sgmii_adapter, index, &res_sgmii_adapter)) { dev_err(dev, "%s: ERROR: failed mapping adapter\n", __func__); ret = -EINVAL; goto err_node_put; } dwmac->pcs.sgmii_adapter_base = devm_ioremap_resource(dev, &res_sgmii_adapter); if (IS_ERR(dwmac->pcs.sgmii_adapter_base)) { ret = PTR_ERR(dwmac->pcs.sgmii_adapter_base); goto err_node_put; } } index = of_property_match_string(np_sgmii_adapter, "reg-names", "eth_tse_control_port"); if (index >= 0) { if (of_address_to_resource(np_sgmii_adapter, index, &res_tse_pcs)) { dev_err(dev, "%s: ERROR: failed mapping tse control port\n", __func__); ret = -EINVAL; goto err_node_put; } dwmac->pcs.tse_pcs_base = devm_ioremap_resource(dev, &res_tse_pcs); if (IS_ERR(dwmac->pcs.tse_pcs_base)) { ret = PTR_ERR(dwmac->pcs.tse_pcs_base); goto err_node_put; } } } dwmac->reg_offset = reg_offset; dwmac->reg_shift = reg_shift; dwmac->sys_mgr_base_addr = sys_mgr_base_addr; dwmac->dev = dev; of_node_put(np_sgmii_adapter); return 0; err_node_put: of_node_put(np_sgmii_adapter); return ret; } static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) { struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr; int phymode = dwmac->interface; u32 reg_offset = dwmac->reg_offset; u32 reg_shift = dwmac->reg_shift; u32 ctrl, val, module; switch (phymode) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; break; case PHY_INTERFACE_MODE_MII: case PHY_INTERFACE_MODE_GMII: case PHY_INTERFACE_MODE_SGMII: val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; break; default: dev_err(dwmac->dev, "bad phy mode %d\n", phymode); return -EINVAL; } /* Overwrite val to GMII if splitter core is enabled. The phymode here * is the actual phy mode on phy hardware, but phy interface from * EMAC core is GMII. */ if (dwmac->splitter_base) val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; /* Assert reset to the enet controller before changing the phy mode */ reset_control_assert(dwmac->stmmac_ocp_rst); reset_control_assert(dwmac->stmmac_rst); regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); ctrl |= val << reg_shift; if (dwmac->f2h_ptp_ref_clk || phymode == PHY_INTERFACE_MODE_MII || phymode == PHY_INTERFACE_MODE_GMII || phymode == PHY_INTERFACE_MODE_SGMII) { ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2); regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, &module); module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2)); regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, module); } else { ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2)); } regmap_write(sys_mgr_base_addr, reg_offset, ctrl); /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ reset_control_deassert(dwmac->stmmac_ocp_rst); reset_control_deassert(dwmac->stmmac_rst); if (phymode == PHY_INTERFACE_MODE_SGMII) { if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) { dev_err(dwmac->dev, "Unable to initialize TSE PCS"); return -EINVAL; } } return 0; } static int socfpga_dwmac_probe(struct platform_device *pdev) { struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res; struct device *dev = &pdev->dev; int ret; struct socfpga_dwmac *dwmac; struct net_device *ndev; struct stmmac_priv *stpriv; ret = stmmac_get_platform_resources(pdev, &stmmac_res); if (ret) return ret; plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); if (IS_ERR(plat_dat)) return PTR_ERR(plat_dat); dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL); if (!dwmac) { ret = -ENOMEM; goto err_remove_config_dt; } dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp"); if (IS_ERR(dwmac->stmmac_ocp_rst)) { ret = PTR_ERR(dwmac->stmmac_ocp_rst); dev_err(dev, "error getting reset control of ocp %d\n", ret); goto err_remove_config_dt; } reset_control_deassert(dwmac->stmmac_ocp_rst); ret = socfpga_dwmac_parse_data(dwmac, dev); if (ret) { dev_err(dev, "Unable to parse OF data\n"); goto err_remove_config_dt; } plat_dat->bsp_priv = dwmac; plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed; ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (ret) goto err_remove_config_dt; ndev = platform_get_drvdata(pdev); stpriv = netdev_priv(ndev); /* The socfpga driver needs to control the stmmac reset to set the phy * mode. Create a copy of the core reset handle so it can be used by * the driver later. */ dwmac->stmmac_rst = stpriv->plat->stmmac_rst; ret = socfpga_dwmac_set_phy_mode(dwmac); if (ret) goto err_dvr_remove; return 0; err_dvr_remove: stmmac_dvr_remove(&pdev->dev); err_remove_config_dt: stmmac_remove_config_dt(pdev, plat_dat); return ret; } #ifdef CONFIG_PM_SLEEP static int socfpga_dwmac_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); socfpga_dwmac_set_phy_mode(priv->plat->bsp_priv); /* Before the enet controller is suspended, the phy is suspended. * This causes the phy clock to be gated. The enet controller is * resumed before the phy, so the clock is still gated "off" when * the enet controller is resumed. This code makes sure the phy * is "resumed" before reinitializing the enet controller since * the enet controller depends on an active phy clock to complete * a DMA reset. A DMA reset will "time out" if executed * with no phy clock input on the Synopsys enet controller. * Verified through Synopsys Case #8000711656. * * Note that the phy clock is also gated when the phy is isolated. * Phy "suspend" and "isolate" controls are located in phy basic * control register 0, and can be modified by the phy driver * framework. */ if (ndev->phydev) phy_resume(ndev->phydev); return stmmac_resume(dev); } #endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(socfpga_dwmac_pm_ops, stmmac_suspend, socfpga_dwmac_resume); static const struct of_device_id socfpga_dwmac_match[] = { { .compatible = "altr,socfpga-stmmac" }, { } }; MODULE_DEVICE_TABLE(of, socfpga_dwmac_match); static struct platform_driver socfpga_dwmac_driver = { .probe = socfpga_dwmac_probe, .remove = stmmac_pltfr_remove, .driver = { .name = "socfpga-dwmac", .pm = &socfpga_dwmac_pm_ops, .of_match_table = socfpga_dwmac_match, }, }; module_platform_driver(socfpga_dwmac_driver); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1