Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Arend Van Spriel | 6416 | 82.90% | 13 | 19.12% |
Hauke Mehrtens | 279 | 3.61% | 9 | 13.24% |
Roland Vossen | 222 | 2.87% | 5 | 7.35% |
John W. Linville | 214 | 2.77% | 1 | 1.47% |
Ali MJ Al-Nasrawy | 159 | 2.05% | 2 | 2.94% |
Seth Forshee | 155 | 2.00% | 3 | 4.41% |
Piotr Haber | 63 | 0.81% | 7 | 10.29% |
Johannes Berg | 54 | 0.70% | 7 | 10.29% |
Emil Goode | 35 | 0.45% | 2 | 2.94% |
Sara Sharon | 33 | 0.43% | 1 | 1.47% |
Luis R. Rodriguez | 18 | 0.23% | 1 | 1.47% |
Joe Perches | 16 | 0.21% | 4 | 5.88% |
Alwin Beukers | 14 | 0.18% | 1 | 1.47% |
Takashi Iwai | 14 | 0.18% | 2 | 2.94% |
Jeff Mahoney | 11 | 0.14% | 1 | 1.47% |
Vladimir Zapolskiy | 9 | 0.12% | 1 | 1.47% |
Andrzej Zaborowski | 9 | 0.12% | 1 | 1.47% |
Thomas Huehn | 6 | 0.08% | 2 | 2.94% |
Emmanuel Grumbach | 5 | 0.06% | 1 | 1.47% |
Linus Torvalds | 3 | 0.04% | 1 | 1.47% |
Paul Gortmaker | 2 | 0.03% | 1 | 1.47% |
Rusty Russell | 1 | 0.01% | 1 | 1.47% |
Christophe Jaillet | 1 | 0.01% | 1 | 1.47% |
Total | 7739 | 68 |
/* * Copyright (c) 2010 Broadcom Corporation * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de> * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #define __UNDEF_NO_VERSION__ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/etherdevice.h> #include <linux/sched.h> #include <linux/firmware.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/bcma/bcma.h> #include <net/mac80211.h> #include <defs.h> #include "phy/phy_int.h" #include "d11.h" #include "channel.h" #include "scb.h" #include "pub.h" #include "ucode_loader.h" #include "mac80211_if.h" #include "main.h" #include "debug.h" #include "led.h" #define N_TX_QUEUES 4 /* #tx queues on mac80211<->driver interface */ #define BRCMS_FLUSH_TIMEOUT 500 /* msec */ /* Flags we support */ #define MAC_FILTERS (FIF_ALLMULTI | \ FIF_FCSFAIL | \ FIF_CONTROL | \ FIF_OTHER_BSS | \ FIF_BCN_PRBRESP_PROMISC | \ FIF_PSPOLL) #define CHAN2GHZ(channel, freqency, chflags) { \ .band = NL80211_BAND_2GHZ, \ .center_freq = (freqency), \ .hw_value = (channel), \ .flags = chflags, \ .max_antenna_gain = 0, \ .max_power = 19, \ } #define CHAN5GHZ(channel, chflags) { \ .band = NL80211_BAND_5GHZ, \ .center_freq = 5000 + 5*(channel), \ .hw_value = (channel), \ .flags = chflags, \ .max_antenna_gain = 0, \ .max_power = 21, \ } #define RATE(rate100m, _flags) { \ .bitrate = (rate100m), \ .flags = (_flags), \ .hw_value = (rate100m / 5), \ } struct firmware_hdr { __le32 offset; __le32 len; __le32 idx; }; static const char * const brcms_firmwares[MAX_FW_IMAGES] = { "brcm/bcm43xx", NULL }; static int n_adapters_found; MODULE_AUTHOR("Broadcom Corporation"); MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver."); MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); /* This needs to be adjusted when brcms_firmwares changes */ MODULE_FIRMWARE("brcm/bcm43xx-0.fw"); MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw"); /* recognized BCMA Core IDs */ static struct bcma_device_id brcms_coreid_table[] = { BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS), BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS), BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS), {}, }; MODULE_DEVICE_TABLE(bcma, brcms_coreid_table); #if defined(CONFIG_BRCMDBG) /* * Module parameter for setting the debug message level. Available * flags are specified by the BRCM_DL_* macros in * drivers/net/wireless/brcm80211/include/defs.h. */ module_param_named(debug, brcm_msg_level, uint, 0644); #endif static struct ieee80211_channel brcms_2ghz_chantable[] = { CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS), CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS), CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS), CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS), CHAN2GHZ(5, 2432, 0), CHAN2GHZ(6, 2437, 0), CHAN2GHZ(7, 2442, 0), CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(12, 2467, IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(13, 2472, IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(14, 2484, IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | IEEE80211_CHAN_NO_OFDM) }; static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { /* UNII-1 */ CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS), /* UNII-2 */ CHAN5GHZ(52, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(56, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(60, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(64, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), /* MID */ CHAN5GHZ(100, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(104, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(108, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(112, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(116, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(120, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(124, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(128, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(132, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(136, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(140, IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS), /* UNII-3 */ CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) }; /* * The rate table is used for both 2.4G and 5G rates. The * latter being a subset as it does not support CCK rates. */ static struct ieee80211_rate legacy_ratetable[] = { RATE(10, 0), RATE(20, IEEE80211_RATE_SHORT_PREAMBLE), RATE(55, IEEE80211_RATE_SHORT_PREAMBLE), RATE(110, IEEE80211_RATE_SHORT_PREAMBLE), RATE(60, 0), RATE(90, 0), RATE(120, 0), RATE(180, 0), RATE(240, 0), RATE(360, 0), RATE(480, 0), RATE(540, 0), }; static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = { .band = NL80211_BAND_2GHZ, .channels = brcms_2ghz_chantable, .n_channels = ARRAY_SIZE(brcms_2ghz_chantable), .bitrates = legacy_ratetable, .n_bitrates = ARRAY_SIZE(legacy_ratetable), .ht_cap = { /* from include/linux/ieee80211.h */ .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, .ampdu_density = AMPDU_DEF_MPDU_DENSITY, .mcs = { /* placeholders for now */ .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0}, .rx_highest = cpu_to_le16(500), .tx_params = IEEE80211_HT_MCS_TX_DEFINED} } }; static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = { .band = NL80211_BAND_5GHZ, .channels = brcms_5ghz_nphy_chantable, .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable), .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET, .n_bitrates = ARRAY_SIZE(legacy_ratetable) - BRCMS_LEGACY_5G_RATE_OFFSET, .ht_cap = { .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, .ampdu_density = AMPDU_DEF_MPDU_DENSITY, .mcs = { /* placeholders for now */ .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0}, .rx_highest = cpu_to_le16(500), .tx_params = IEEE80211_HT_MCS_TX_DEFINED} } }; /* flags the given rate in rateset as requested */ static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br) { u32 i; for (i = 0; i < rs->count; i++) { if (rate != (rs->rates[i] & 0x7f)) continue; if (is_br) rs->rates[i] |= BRCMS_RATE_FLAG; else rs->rates[i] &= BRCMS_RATE_MASK; return; } } /** * This function frees the WL per-device resources. * * This function frees resources owned by the WL device pointed to * by the wl parameter. * * precondition: can both be called locked and unlocked * */ static void brcms_free(struct brcms_info *wl) { struct brcms_timer *t, *next; /* free ucode data */ if (wl->fw.fw_cnt) brcms_ucode_data_free(&wl->ucode); if (wl->irq) free_irq(wl->irq, wl); /* kill dpc */ tasklet_kill(&wl->tasklet); if (wl->pub) { brcms_debugfs_detach(wl->pub); brcms_c_module_unregister(wl->pub, "linux", wl); } /* free common resources */ if (wl->wlc) { brcms_c_detach(wl->wlc); wl->wlc = NULL; wl->pub = NULL; } /* virtual interface deletion is deferred so we cannot spinwait */ /* wait for all pending callbacks to complete */ while (atomic_read(&wl->callbacks) > 0) schedule(); /* free timers */ for (t = wl->timers; t; t = next) { next = t->next; #ifdef DEBUG kfree(t->name); #endif kfree(t); } } /* * called from both kernel as from this kernel module (error flow on attach) * precondition: perimeter lock is not acquired. */ static void brcms_remove(struct bcma_device *pdev) { struct ieee80211_hw *hw = bcma_get_drvdata(pdev); struct brcms_info *wl = hw->priv; if (wl->wlc) { brcms_led_unregister(wl); wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false); wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); ieee80211_unregister_hw(hw); } brcms_free(wl); bcma_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); } /* * Precondition: Since this function is called in brcms_pci_probe() context, * no locking is required. */ static void brcms_release_fw(struct brcms_info *wl) { int i; for (i = 0; i < MAX_FW_IMAGES; i++) { release_firmware(wl->fw.fw_bin[i]); release_firmware(wl->fw.fw_hdr[i]); } } /* * Precondition: Since this function is called in brcms_pci_probe() context, * no locking is required. */ static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev) { int status; struct device *device = &pdev->dev; char fw_name[100]; int i; memset(&wl->fw, 0, sizeof(struct brcms_firmware)); for (i = 0; i < MAX_FW_IMAGES; i++) { if (brcms_firmwares[i] == NULL) break; sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i], UCODE_LOADER_API_VER); status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); if (status) { wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", KBUILD_MODNAME, fw_name); return status; } sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i], UCODE_LOADER_API_VER); status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); if (status) { wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", KBUILD_MODNAME, fw_name); return status; } wl->fw.hdr_num_entries[i] = wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr)); } wl->fw.fw_cnt = i; status = brcms_ucode_data_init(wl, &wl->ucode); brcms_release_fw(wl); return status; } static void brcms_ops_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, struct sk_buff *skb) { struct brcms_info *wl = hw->priv; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); spin_lock_bh(&wl->lock); if (!wl->pub->up) { brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n"); kfree_skb(skb); goto done; } if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw)) tx_info->rate_driver_data[0] = control->sta; done: spin_unlock_bh(&wl->lock); } static int brcms_ops_start(struct ieee80211_hw *hw) { struct brcms_info *wl = hw->priv; bool blocked; int err; if (!wl->ucode.bcm43xx_bomminor) { err = brcms_request_fw(wl, wl->wlc->hw->d11core); if (err) return -ENOENT; } ieee80211_wake_queues(hw); spin_lock_bh(&wl->lock); blocked = brcms_rfkill_set_hw_state(wl); spin_unlock_bh(&wl->lock); if (!blocked) wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); spin_lock_bh(&wl->lock); /* avoid acknowledging frames before a non-monitor device is added */ wl->mute_tx = true; if (!wl->pub->up) if (!blocked) err = brcms_up(wl); else err = -ERFKILL; else err = -ENODEV; spin_unlock_bh(&wl->lock); if (err != 0) brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n", __func__, err); bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true); return err; } static void brcms_ops_stop(struct ieee80211_hw *hw) { struct brcms_info *wl = hw->priv; int status; ieee80211_stop_queues(hw); if (wl->wlc == NULL) return; spin_lock_bh(&wl->lock); status = brcms_c_chipmatch(wl->wlc->hw->d11core); spin_unlock_bh(&wl->lock); if (!status) { brcms_err(wl->wlc->hw->d11core, "wl: brcms_ops_stop: chipmatch failed\n"); return; } bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false); /* put driver in down state */ spin_lock_bh(&wl->lock); brcms_down(wl); spin_unlock_bh(&wl->lock); } static int brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct brcms_info *wl = hw->priv; /* Just STA, AP and ADHOC for now */ if (vif->type != NL80211_IFTYPE_STATION && vif->type != NL80211_IFTYPE_AP && vif->type != NL80211_IFTYPE_ADHOC) { brcms_err(wl->wlc->hw->d11core, "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n", __func__, vif->type); return -EOPNOTSUPP; } spin_lock_bh(&wl->lock); wl->wlc->vif = vif; wl->mute_tx = false; brcms_c_mute(wl->wlc, false); if (vif->type == NL80211_IFTYPE_STATION) brcms_c_start_station(wl->wlc, vif->addr); else if (vif->type == NL80211_IFTYPE_AP) brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid, vif->bss_conf.ssid, vif->bss_conf.ssid_len); else if (vif->type == NL80211_IFTYPE_ADHOC) brcms_c_start_adhoc(wl->wlc, vif->addr); spin_unlock_bh(&wl->lock); return 0; } static void brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct brcms_info *wl = hw->priv; spin_lock_bh(&wl->lock); wl->wlc->vif = NULL; spin_unlock_bh(&wl->lock); } static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed) { struct ieee80211_conf *conf = &hw->conf; struct brcms_info *wl = hw->priv; struct bcma_device *core = wl->wlc->hw->d11core; int err = 0; int new_int; spin_lock_bh(&wl->lock); if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { brcms_c_set_beacon_listen_interval(wl->wlc, conf->listen_interval); } if (changed & IEEE80211_CONF_CHANGE_MONITOR) brcms_dbg_info(core, "%s: change monitor mode: %s\n", __func__, conf->flags & IEEE80211_CONF_MONITOR ? "true" : "false"); if (changed & IEEE80211_CONF_CHANGE_PS) brcms_err(core, "%s: change power-save mode: %s (implement)\n", __func__, conf->flags & IEEE80211_CONF_PS ? "true" : "false"); if (changed & IEEE80211_CONF_CHANGE_POWER) { err = brcms_c_set_tx_power(wl->wlc, conf->power_level); if (err < 0) { brcms_err(core, "%s: Error setting power_level\n", __func__); goto config_out; } new_int = brcms_c_get_tx_power(wl->wlc); if (new_int != conf->power_level) brcms_err(core, "%s: Power level req != actual, %d %d\n", __func__, conf->power_level, new_int); } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { if (conf->chandef.width == NL80211_CHAN_WIDTH_20 || conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT) err = brcms_c_set_channel(wl->wlc, conf->chandef.chan->hw_value); else err = -ENOTSUPP; } if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) err = brcms_c_set_rate_limit(wl->wlc, conf->short_frame_max_tx_count, conf->long_frame_max_tx_count); config_out: spin_unlock_bh(&wl->lock); return err; } static void brcms_ops_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, u32 changed) { struct brcms_info *wl = hw->priv; struct bcma_device *core = wl->wlc->hw->d11core; if (changed & BSS_CHANGED_ASSOC) { /* association status changed (associated/disassociated) * also implies a change in the AID. */ brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME, __func__, info->assoc ? "" : "dis"); spin_lock_bh(&wl->lock); brcms_c_associate_upd(wl->wlc, info->assoc); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_ERP_SLOT) { s8 val; /* slot timing changed */ if (info->use_short_slot) val = 1; else val = 0; spin_lock_bh(&wl->lock); brcms_c_set_shortslot_override(wl->wlc, val); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_HT) { /* 802.11n parameters changed */ u16 mode = info->ht_operation_mode; spin_lock_bh(&wl->lock); brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG, mode & IEEE80211_HT_OP_MODE_PROTECTION); brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF, mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS, mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_BASIC_RATES) { struct ieee80211_supported_band *bi; u32 br_mask, i; u16 rate; struct brcm_rateset rs; int error; /* retrieve the current rates */ spin_lock_bh(&wl->lock); brcms_c_get_current_rateset(wl->wlc, &rs); spin_unlock_bh(&wl->lock); br_mask = info->basic_rates; bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)]; for (i = 0; i < bi->n_bitrates; i++) { /* convert to internal rate value */ rate = (bi->bitrates[i].bitrate << 1) / 10; /* set/clear basic rate flag */ brcms_set_basic_rate(&rs, rate, br_mask & 1); br_mask >>= 1; } /* update the rate set */ spin_lock_bh(&wl->lock); error = brcms_c_set_rateset(wl->wlc, &rs); spin_unlock_bh(&wl->lock); if (error) brcms_err(core, "changing basic rates failed: %d\n", error); } if (changed & BSS_CHANGED_BEACON_INT) { /* Beacon interval changed */ spin_lock_bh(&wl->lock); brcms_c_set_beacon_period(wl->wlc, info->beacon_int); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_BSSID) { /* BSSID changed, for whatever reason (IBSS and managed mode) */ spin_lock_bh(&wl->lock); brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_SSID) { /* BSSID changed, for whatever reason (IBSS and managed mode) */ spin_lock_bh(&wl->lock); brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_BEACON) { /* Beacon data changed, retrieve new beacon (beaconing modes) */ struct sk_buff *beacon; u16 tim_offset = 0; spin_lock_bh(&wl->lock); beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL); brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset, info->dtim_period); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_AP_PROBE_RESP) { struct sk_buff *probe_resp; spin_lock_bh(&wl->lock); probe_resp = ieee80211_proberesp_get(hw, vif); brcms_c_set_new_probe_resp(wl->wlc, probe_resp); spin_unlock_bh(&wl->lock); } if (changed & BSS_CHANGED_BEACON_ENABLED) { /* Beaconing should be enabled/disabled (beaconing modes) */ brcms_err(core, "%s: Beacon enabled: %s\n", __func__, info->enable_beacon ? "true" : "false"); if (info->enable_beacon && hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) { brcms_c_enable_probe_resp(wl->wlc, true); } else { brcms_c_enable_probe_resp(wl->wlc, false); } } if (changed & BSS_CHANGED_CQM) { /* Connection quality monitor config changed */ brcms_err(core, "%s: cqm change: threshold %d, hys %d " " (implement)\n", __func__, info->cqm_rssi_thold, info->cqm_rssi_hyst); } if (changed & BSS_CHANGED_IBSS) { /* IBSS join status changed */ brcms_err(core, "%s: IBSS joined: %s (implement)\n", __func__, info->ibss_joined ? "true" : "false"); } if (changed & BSS_CHANGED_ARP_FILTER) { /* Hardware ARP filter address list or state changed */ brcms_err(core, "%s: arp filtering: %d addresses" " (implement)\n", __func__, info->arp_addr_cnt); } if (changed & BSS_CHANGED_QOS) { /* * QoS for this association was enabled/disabled. * Note that it is only ever disabled for station mode. */ brcms_err(core, "%s: qos enabled: %s (implement)\n", __func__, info->qos ? "true" : "false"); } return; } static void brcms_ops_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, u64 multicast) { struct brcms_info *wl = hw->priv; struct bcma_device *core = wl->wlc->hw->d11core; changed_flags &= MAC_FILTERS; *total_flags &= MAC_FILTERS; if (changed_flags & FIF_ALLMULTI) brcms_dbg_info(core, "FIF_ALLMULTI\n"); if (changed_flags & FIF_FCSFAIL) brcms_dbg_info(core, "FIF_FCSFAIL\n"); if (changed_flags & FIF_CONTROL) brcms_dbg_info(core, "FIF_CONTROL\n"); if (changed_flags & FIF_OTHER_BSS) brcms_dbg_info(core, "FIF_OTHER_BSS\n"); if (changed_flags & FIF_PSPOLL) brcms_dbg_info(core, "FIF_PSPOLL\n"); if (changed_flags & FIF_BCN_PRBRESP_PROMISC) brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n"); spin_lock_bh(&wl->lock); brcms_c_mac_promisc(wl->wlc, *total_flags); spin_unlock_bh(&wl->lock); return; } static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const u8 *mac_addr) { struct brcms_info *wl = hw->priv; spin_lock_bh(&wl->lock); brcms_c_scan_start(wl->wlc); spin_unlock_bh(&wl->lock); return; } static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct brcms_info *wl = hw->priv; spin_lock_bh(&wl->lock); brcms_c_scan_stop(wl->wlc); spin_unlock_bh(&wl->lock); return; } static int brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) { struct brcms_info *wl = hw->priv; spin_lock_bh(&wl->lock); brcms_c_wme_setparams(wl->wlc, queue, params, true); spin_unlock_bh(&wl->lock); return 0; } static int brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta) { struct brcms_info *wl = hw->priv; struct scb *scb = &wl->wlc->pri_scb; brcms_c_init_scb(scb); wl->pub->global_ampdu = &(scb->scb_ampdu); wl->pub->global_ampdu->scb = scb; wl->pub->global_ampdu->max_pdu = 16; /* * minstrel_ht initiates addBA on our behalf by calling * ieee80211_start_tx_ba_session() */ return 0; } static int brcms_ops_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_ampdu_params *params) { struct brcms_info *wl = hw->priv; struct scb *scb = &wl->wlc->pri_scb; int status; struct ieee80211_sta *sta = params->sta; enum ieee80211_ampdu_mlme_action action = params->action; u16 tid = params->tid; u8 buf_size = params->buf_size; if (WARN_ON(scb->magic != SCB_MAGIC)) return -EIDRM; switch (action) { case IEEE80211_AMPDU_RX_START: break; case IEEE80211_AMPDU_RX_STOP: break; case IEEE80211_AMPDU_TX_START: spin_lock_bh(&wl->lock); status = brcms_c_aggregatable(wl->wlc, tid); spin_unlock_bh(&wl->lock); if (!status) { brcms_dbg_ht(wl->wlc->hw->d11core, "START: tid %d is not agg\'able\n", tid); return -EINVAL; } ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_STOP_CONT: case IEEE80211_AMPDU_TX_STOP_FLUSH: case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: spin_lock_bh(&wl->lock); brcms_c_ampdu_flush(wl->wlc, sta, tid); spin_unlock_bh(&wl->lock); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_OPERATIONAL: /* * BA window size from ADDBA response ('buf_size') defines how * many outstanding MPDUs are allowed for the BA stream by * recipient and traffic class. 'ampdu_factor' gives maximum * AMPDU size. */ spin_lock_bh(&wl->lock); brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size, (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor)) - 1); spin_unlock_bh(&wl->lock); /* Power save wakeup */ break; default: brcms_err(wl->wlc->hw->d11core, "%s: Invalid command, ignoring\n", __func__); } return 0; } static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw) { struct brcms_info *wl = hw->priv; bool blocked; spin_lock_bh(&wl->lock); blocked = brcms_c_check_radio_disabled(wl->wlc); spin_unlock_bh(&wl->lock); wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); } static bool brcms_tx_flush_completed(struct brcms_info *wl) { bool result; spin_lock_bh(&wl->lock); result = brcms_c_tx_flush_completed(wl->wlc); spin_unlock_bh(&wl->lock); return result; } static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u32 queues, bool drop) { struct brcms_info *wl = hw->priv; int ret; no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false"); ret = wait_event_timeout(wl->tx_flush_wq, brcms_tx_flush_completed(wl), msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT)); brcms_dbg_mac80211(wl->wlc->hw->d11core, "ret=%d\n", jiffies_to_msecs(ret)); } static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct brcms_info *wl = hw->priv; u64 tsf; spin_lock_bh(&wl->lock); tsf = brcms_c_tsf_get(wl->wlc); spin_unlock_bh(&wl->lock); return tsf; } static void brcms_ops_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf) { struct brcms_info *wl = hw->priv; spin_lock_bh(&wl->lock); brcms_c_tsf_set(wl->wlc, tsf); spin_unlock_bh(&wl->lock); } static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set) { struct brcms_info *wl = hw->priv; struct sk_buff *beacon = NULL; u16 tim_offset = 0; spin_lock_bh(&wl->lock); if (wl->wlc->vif) beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif, &tim_offset, NULL); if (beacon) brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset, wl->wlc->vif->bss_conf.dtim_period); spin_unlock_bh(&wl->lock); return 0; } static const struct ieee80211_ops brcms_ops = { .tx = brcms_ops_tx, .start = brcms_ops_start, .stop = brcms_ops_stop, .add_interface = brcms_ops_add_interface, .remove_interface = brcms_ops_remove_interface, .config = brcms_ops_config, .bss_info_changed = brcms_ops_bss_info_changed, .configure_filter = brcms_ops_configure_filter, .sw_scan_start = brcms_ops_sw_scan_start, .sw_scan_complete = brcms_ops_sw_scan_complete, .conf_tx = brcms_ops_conf_tx, .sta_add = brcms_ops_sta_add, .ampdu_action = brcms_ops_ampdu_action, .rfkill_poll = brcms_ops_rfkill_poll, .flush = brcms_ops_flush, .get_tsf = brcms_ops_get_tsf, .set_tsf = brcms_ops_set_tsf, .set_tim = brcms_ops_beacon_set_tim, }; void brcms_dpc(unsigned long data) { struct brcms_info *wl; wl = (struct brcms_info *) data; spin_lock_bh(&wl->lock); /* call the common second level interrupt handler */ if (wl->pub->up) { if (wl->resched) { unsigned long flags; spin_lock_irqsave(&wl->isr_lock, flags); brcms_c_intrsupd(wl->wlc); spin_unlock_irqrestore(&wl->isr_lock, flags); } wl->resched = brcms_c_dpc(wl->wlc, true); } /* brcms_c_dpc() may bring the driver down */ if (!wl->pub->up) goto done; /* re-schedule dpc */ if (wl->resched) tasklet_schedule(&wl->tasklet); else /* re-enable interrupts */ brcms_intrson(wl); done: spin_unlock_bh(&wl->lock); wake_up(&wl->tx_flush_wq); } static irqreturn_t brcms_isr(int irq, void *dev_id) { struct brcms_info *wl; irqreturn_t ret = IRQ_NONE; wl = (struct brcms_info *) dev_id; spin_lock(&wl->isr_lock); /* call common first level interrupt handler */ if (brcms_c_isr(wl->wlc)) { /* schedule second level handler */ tasklet_schedule(&wl->tasklet); ret = IRQ_HANDLED; } spin_unlock(&wl->isr_lock); return ret; } /* * is called in brcms_pci_probe() context, therefore no locking required. */ static int ieee_hw_rate_init(struct ieee80211_hw *hw) { struct brcms_info *wl = hw->priv; struct brcms_c_info *wlc = wl->wlc; struct ieee80211_supported_band *band; int has_5g = 0; u16 phy_type; hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL; hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL; phy_type = brcms_c_get_phy_type(wl->wlc, 0); if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) { band = &wlc->bandstate[BAND_2G_INDEX]->band; *band = brcms_band_2GHz_nphy_template; if (phy_type == PHY_TYPE_LCN) { /* Single stream */ band->ht_cap.mcs.rx_mask[1] = 0; band->ht_cap.mcs.rx_highest = cpu_to_le16(72); } hw->wiphy->bands[NL80211_BAND_2GHZ] = band; } else { return -EPERM; } /* Assume all bands use the same phy. True for 11n devices. */ if (wl->pub->_nbands > 1) { has_5g++; if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) { band = &wlc->bandstate[BAND_5G_INDEX]->band; *band = brcms_band_5GHz_nphy_template; hw->wiphy->bands[NL80211_BAND_5GHZ] = band; } else { return -EPERM; } } return 0; } /* * is called in brcms_pci_probe() context, therefore no locking required. */ static int ieee_hw_init(struct ieee80211_hw *hw) { ieee80211_hw_set(hw, AMPDU_AGGREGATION); ieee80211_hw_set(hw, SIGNAL_DBM); ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); hw->extra_tx_headroom = brcms_c_get_header_len(); hw->queues = N_TX_QUEUES; hw->max_rates = 2; /* Primary rate and 1 fallback rate */ /* channel change time is dependent on chip and band */ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_ADHOC); /* * deactivate sending probe responses by ucude, because this will * cause problems when WPS is used. * * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; */ wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); hw->rate_control_algorithm = "minstrel_ht"; hw->sta_data_size = 0; return ieee_hw_rate_init(hw); } /** * attach to the WL device. * * Attach to the WL device identified by vendor and device parameters. * regs is a host accessible memory address pointing to WL device registers. * * is called in brcms_bcma_probe() context, therefore no locking required. */ static struct brcms_info *brcms_attach(struct bcma_device *pdev) { struct brcms_info *wl = NULL; int unit, err; struct ieee80211_hw *hw; u8 perm[ETH_ALEN]; unit = n_adapters_found; err = 0; if (unit < 0) return NULL; /* allocate private info */ hw = bcma_get_drvdata(pdev); if (hw != NULL) wl = hw->priv; if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL)) return NULL; wl->wiphy = hw->wiphy; atomic_set(&wl->callbacks, 0); init_waitqueue_head(&wl->tx_flush_wq); /* setup the bottom half handler */ tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl); spin_lock_init(&wl->lock); spin_lock_init(&wl->isr_lock); /* common load-time initialization */ wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err); if (!wl->wlc) { wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n", KBUILD_MODNAME, err); goto fail; } wl->pub = brcms_c_pub(wl->wlc); wl->pub->ieee_hw = hw; /* register our interrupt handler */ if (request_irq(pdev->irq, brcms_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) { wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); goto fail; } wl->irq = pdev->irq; /* register module */ brcms_c_module_register(wl->pub, "linux", wl, NULL); if (ieee_hw_init(hw)) { wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit, __func__); goto fail; } brcms_c_regd_init(wl->wlc); memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN); if (WARN_ON(!is_valid_ether_addr(perm))) goto fail; SET_IEEE80211_PERM_ADDR(hw, perm); err = ieee80211_register_hw(hw); if (err) wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status" "%d\n", __func__, err); if (wl->pub->srom_ccode[0] && regulatory_hint(wl->wiphy, wl->pub->srom_ccode)) wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__); brcms_debugfs_attach(wl->pub); brcms_debugfs_create_files(wl->pub); n_adapters_found++; return wl; fail: brcms_free(wl); return NULL; } /** * determines if a device is a WL device, and if so, attaches it. * * This function determines if a device pointed to by pdev is a WL device, * and if so, performs a brcms_attach() on it. * * Perimeter lock is initialized in the course of this function. */ static int brcms_bcma_probe(struct bcma_device *pdev) { struct brcms_info *wl; struct ieee80211_hw *hw; dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, pdev->irq); if ((pdev->id.manuf != BCMA_MANUF_BCM) || (pdev->id.id != BCMA_CORE_80211)) return -ENODEV; hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops); if (!hw) { pr_err("%s: ieee80211_alloc_hw failed\n", __func__); return -ENOMEM; } SET_IEEE80211_DEV(hw, &pdev->dev); bcma_set_drvdata(pdev, hw); memset(hw->priv, 0, sizeof(*wl)); wl = brcms_attach(pdev); if (!wl) { pr_err("%s: brcms_attach failed!\n", __func__); return -ENODEV; } brcms_led_register(wl); return 0; } static int brcms_suspend(struct bcma_device *pdev) { struct brcms_info *wl; struct ieee80211_hw *hw; hw = bcma_get_drvdata(pdev); wl = hw->priv; if (!wl) { pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME, __func__); return -ENODEV; } /* only need to flag hw is down for proper resume */ spin_lock_bh(&wl->lock); wl->pub->hw_up = false; spin_unlock_bh(&wl->lock); brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n"); return 0; } static int brcms_resume(struct bcma_device *pdev) { return 0; } static struct bcma_driver brcms_bcma_driver = { .name = KBUILD_MODNAME, .probe = brcms_bcma_probe, .suspend = brcms_suspend, .resume = brcms_resume, .remove = brcms_remove, .id_table = brcms_coreid_table, }; /** * This is the main entry point for the brcmsmac driver. * * This function is scheduled upon module initialization and * does the driver registration, which result in brcms_bcma_probe() * call resulting in the driver bringup. */ static void brcms_driver_init(struct work_struct *work) { int error; error = bcma_driver_register(&brcms_bcma_driver); if (error) pr_err("%s: register returned %d\n", __func__, error); } static DECLARE_WORK(brcms_driver_work, brcms_driver_init); static int __init brcms_module_init(void) { brcms_debugfs_init(); if (!schedule_work(&brcms_driver_work)) return -EBUSY; return 0; } /** * This function unloads the brcmsmac driver from the system. * * This function unconditionally unloads the brcmsmac driver module from the * system. * */ static void __exit brcms_module_exit(void) { cancel_work_sync(&brcms_driver_work); bcma_driver_unregister(&brcms_bcma_driver); brcms_debugfs_exit(); } module_init(brcms_module_init); module_exit(brcms_module_exit); /* * precondition: perimeter lock has been acquired */ void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif, bool state, int prio) { brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__); } /* * precondition: perimeter lock has been acquired */ void brcms_init(struct brcms_info *wl) { brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n", wl->pub->unit); brcms_reset(wl); brcms_c_init(wl->wlc, wl->mute_tx); } /* * precondition: perimeter lock has been acquired */ uint brcms_reset(struct brcms_info *wl) { brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit); brcms_c_reset(wl->wlc); /* dpc will not be rescheduled */ wl->resched = false; /* inform publicly that interface is down */ wl->pub->up = false; return 0; } void brcms_fatal_error(struct brcms_info *wl) { brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n", wl->wlc->pub->unit); brcms_reset(wl); ieee80211_restart_hw(wl->pub->ieee_hw); } /* * These are interrupt on/off entry points. Disable interrupts * during interrupt state transition. */ void brcms_intrson(struct brcms_info *wl) { unsigned long flags; spin_lock_irqsave(&wl->isr_lock, flags); brcms_c_intrson(wl->wlc); spin_unlock_irqrestore(&wl->isr_lock, flags); } u32 brcms_intrsoff(struct brcms_info *wl) { unsigned long flags; u32 status; spin_lock_irqsave(&wl->isr_lock, flags); status = brcms_c_intrsoff(wl->wlc); spin_unlock_irqrestore(&wl->isr_lock, flags); return status; } void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask) { unsigned long flags; spin_lock_irqsave(&wl->isr_lock, flags); brcms_c_intrsrestore(wl->wlc, macintmask); spin_unlock_irqrestore(&wl->isr_lock, flags); } /* * precondition: perimeter lock has been acquired */ int brcms_up(struct brcms_info *wl) { int error = 0; if (wl->pub->up) return 0; error = brcms_c_up(wl->wlc); return error; } /* * precondition: perimeter lock has been acquired */ void brcms_down(struct brcms_info *wl) { uint callbacks, ret_val = 0; /* call common down function */ ret_val = brcms_c_down(wl->wlc); callbacks = atomic_read(&wl->callbacks) - ret_val; /* wait for down callbacks to complete */ spin_unlock_bh(&wl->lock); /* For HIGH_only driver, it's important to actually schedule other work, * not just spin wait since everything runs at schedule level */ SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000); spin_lock_bh(&wl->lock); } /* * precondition: perimeter lock is not acquired */ static void _brcms_timer(struct work_struct *work) { struct brcms_timer *t = container_of(work, struct brcms_timer, dly_wrk.work); spin_lock_bh(&t->wl->lock); if (t->set) { if (t->periodic) { atomic_inc(&t->wl->callbacks); ieee80211_queue_delayed_work(t->wl->pub->ieee_hw, &t->dly_wrk, msecs_to_jiffies(t->ms)); } else { t->set = false; } t->fn(t->arg); } atomic_dec(&t->wl->callbacks); spin_unlock_bh(&t->wl->lock); } /* * Adds a timer to the list. Caller supplies a timer function. * Is called from wlc. * * precondition: perimeter lock has been acquired */ struct brcms_timer *brcms_init_timer(struct brcms_info *wl, void (*fn) (void *arg), void *arg, const char *name) { struct brcms_timer *t; t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC); if (!t) return NULL; INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer); t->wl = wl; t->fn = fn; t->arg = arg; t->next = wl->timers; wl->timers = t; #ifdef DEBUG t->name = kstrdup(name, GFP_ATOMIC); #endif return t; } /* * adds only the kernel timer since it's going to be more accurate * as well as it's easier to make it periodic * * precondition: perimeter lock has been acquired */ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) { struct ieee80211_hw *hw = t->wl->pub->ieee_hw; #ifdef DEBUG if (t->set) brcms_dbg_info(t->wl->wlc->hw->d11core, "%s: Already set. Name: %s, per %d\n", __func__, t->name, periodic); #endif t->ms = ms; t->periodic = (bool) periodic; if (!t->set) { t->set = true; atomic_inc(&t->wl->callbacks); } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } /* * return true if timer successfully deleted, false if still pending * * precondition: perimeter lock has been acquired */ bool brcms_del_timer(struct brcms_timer *t) { if (t->set) { t->set = false; if (!cancel_delayed_work(&t->dly_wrk)) return false; atomic_dec(&t->wl->callbacks); } return true; } /* * precondition: perimeter lock has been acquired */ void brcms_free_timer(struct brcms_timer *t) { struct brcms_info *wl = t->wl; struct brcms_timer *tmp; /* delete the timer in case it is active */ brcms_del_timer(t); if (wl->timers == t) { wl->timers = wl->timers->next; #ifdef DEBUG kfree(t->name); #endif kfree(t); return; } tmp = wl->timers; while (tmp) { if (tmp->next == t) { tmp->next = t->next; #ifdef DEBUG kfree(t->name); #endif kfree(t); return; } tmp = tmp->next; } } /* * precondition: no locking required */ int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx) { int i, entry; const u8 *pdata; struct firmware_hdr *hdr; for (i = 0; i < wl->fw.fw_cnt; i++) { hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data; for (entry = 0; entry < wl->fw.hdr_num_entries[i]; entry++, hdr++) { u32 len = le32_to_cpu(hdr->len); if (le32_to_cpu(hdr->idx) == idx) { pdata = wl->fw.fw_bin[i]->data + le32_to_cpu(hdr->offset); *pbuf = kvmalloc(len, GFP_KERNEL); if (*pbuf == NULL) goto fail; memcpy(*pbuf, pdata, len); return 0; } } } brcms_err(wl->wlc->hw->d11core, "ERROR: ucode buf tag:%d can not be found!\n", idx); *pbuf = NULL; fail: return -ENODATA; } /* * Precondition: Since this function is called in brcms_bcma_probe() context, * no locking is required. */ int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx) { int i, entry; const u8 *pdata; struct firmware_hdr *hdr; for (i = 0; i < wl->fw.fw_cnt; i++) { hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data; for (entry = 0; entry < wl->fw.hdr_num_entries[i]; entry++, hdr++) { if (le32_to_cpu(hdr->idx) == idx) { pdata = wl->fw.fw_bin[i]->data + le32_to_cpu(hdr->offset); if (le32_to_cpu(hdr->len) != 4) { brcms_err(wl->wlc->hw->d11core, "ERROR: fw hdr len\n"); return -ENOMSG; } *n_bytes = le32_to_cpu(*((__le32 *) pdata)); return 0; } } } brcms_err(wl->wlc->hw->d11core, "ERROR: ucode tag:%d can not be found!\n", idx); return -ENOMSG; } /* * precondition: can both be called locked and unlocked */ void brcms_ucode_free_buf(void *p) { kvfree(p); } /* * checks validity of all firmware images loaded from user space * * Precondition: Since this function is called in brcms_bcma_probe() context, * no locking is required. */ int brcms_check_firmwares(struct brcms_info *wl) { int i; int entry; int rc = 0; const struct firmware *fw; const struct firmware *fw_hdr; struct firmware_hdr *ucode_hdr; for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) { fw = wl->fw.fw_bin[i]; fw_hdr = wl->fw.fw_hdr[i]; if (fw == NULL && fw_hdr == NULL) { break; } else if (fw == NULL || fw_hdr == NULL) { wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n", __func__); rc = -EBADF; } else if (fw_hdr->size % sizeof(struct firmware_hdr)) { wiphy_err(wl->wiphy, "%s: non integral fw hdr file " "size %zu/%zu\n", __func__, fw_hdr->size, sizeof(struct firmware_hdr)); rc = -EBADF; } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) { wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n", __func__, fw->size); rc = -EBADF; } else { /* check if ucode section overruns firmware image */ ucode_hdr = (struct firmware_hdr *)fw_hdr->data; for (entry = 0; entry < wl->fw.hdr_num_entries[i] && !rc; entry++, ucode_hdr++) { if (le32_to_cpu(ucode_hdr->offset) + le32_to_cpu(ucode_hdr->len) > fw->size) { wiphy_err(wl->wiphy, "%s: conflicting bin/hdr\n", __func__); rc = -EBADF; } } } } if (rc == 0 && wl->fw.fw_cnt != i) { wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__, wl->fw.fw_cnt); rc = -EBADF; } return rc; } /* * precondition: perimeter lock has been acquired */ bool brcms_rfkill_set_hw_state(struct brcms_info *wl) { bool blocked = brcms_c_check_radio_disabled(wl->wlc); spin_unlock_bh(&wl->lock); wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); if (blocked) wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy); spin_lock_bh(&wl->lock); return blocked; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1