| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ivo van Doorn | 2624 | 97.84% | 13 | 54.17% |
| Gertjan van Wingerde | 42 | 1.57% | 4 | 16.67% |
| Paul McQuade | 7 | 0.26% | 1 | 4.17% |
| Mattias Nissler | 3 | 0.11% | 1 | 4.17% |
| Eric Dumazet | 2 | 0.07% | 1 | 4.17% |
| Jeff Kirsher | 1 | 0.04% | 1 | 4.17% |
| Lalith Suresh | 1 | 0.04% | 1 | 4.17% |
| Luis Correia | 1 | 0.04% | 1 | 4.17% |
| André Goddard Rosa | 1 | 0.04% | 1 | 4.17% |
| Total | 2682 | 24 |
/* Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* Module: rt61pci Abstract: Data structures and registers for the rt61pci module. Supported chipsets: RT2561, RT2561s, RT2661. */ #ifndef RT61PCI_H #define RT61PCI_H /* * RT chip PCI IDs. */ #define RT2561s_PCI_ID 0x0301 #define RT2561_PCI_ID 0x0302 #define RT2661_PCI_ID 0x0401 /* * RF chip defines. */ #define RF5225 0x0001 #define RF5325 0x0002 #define RF2527 0x0003 #define RF2529 0x0004 /* * Signal information. * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 /* * Register layout information. */ #define CSR_REG_BASE 0x3000 #define CSR_REG_SIZE 0x04b0 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0100 #define BBP_BASE 0x0000 #define BBP_SIZE 0x0080 #define RF_BASE 0x0004 #define RF_SIZE 0x0010 /* * Number of TX queues. */ #define NUM_TX_QUEUES 4 /* * PCI registers. */ /* * HOST_CMD_CSR: For HOST to interrupt embedded processor */ #define HOST_CMD_CSR 0x0008 #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f) #define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080) /* * MCU_CNTL_CSR * SELECT_BANK: Select 8051 program bank. * RESET: Enable 8051 reset state. * READY: Ready state for 8051. */ #define MCU_CNTL_CSR 0x000c #define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001) #define MCU_CNTL_CSR_RESET FIELD32(0x00000002) #define MCU_CNTL_CSR_READY FIELD32(0x00000004) /* * SOFT_RESET_CSR * FORCE_CLOCK_ON: Host force MAC clock ON */ #define SOFT_RESET_CSR 0x0010 #define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002) /* * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register. */ #define MCU_INT_SOURCE_CSR 0x0014 #define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001) #define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002) #define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004) #define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008) #define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010) #define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020) #define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040) #define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080) #define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100) #define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200) /* * MCU_INT_MASK_CSR: MCU interrupt source/mask register. */ #define MCU_INT_MASK_CSR 0x0018 #define MCU_INT_MASK_CSR_0 FIELD32(0x00000001) #define MCU_INT_MASK_CSR_1 FIELD32(0x00000002) #define MCU_INT_MASK_CSR_2 FIELD32(0x00000004) #define MCU_INT_MASK_CSR_3 FIELD32(0x00000008) #define MCU_INT_MASK_CSR_4 FIELD32(0x00000010) #define MCU_INT_MASK_CSR_5 FIELD32(0x00000020) #define MCU_INT_MASK_CSR_6 FIELD32(0x00000040) #define MCU_INT_MASK_CSR_7 FIELD32(0x00000080) #define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100) #define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200) /* * PCI_USEC_CSR */ #define PCI_USEC_CSR 0x001c /* * Security key table memory. * 16 entries 32-byte for shared key table * 64 entries 32-byte for pairwise key table * 64 entries 8-byte for pairwise ta key table */ #define SHARED_KEY_TABLE_BASE 0x1000 #define PAIRWISE_KEY_TABLE_BASE 0x1200 #define PAIRWISE_TA_TABLE_BASE 0x1a00 #define SHARED_KEY_ENTRY(__idx) \ (SHARED_KEY_TABLE_BASE + \ ((__idx) * sizeof(struct hw_key_entry))) #define PAIRWISE_KEY_ENTRY(__idx) \ (PAIRWISE_KEY_TABLE_BASE + \ ((__idx) * sizeof(struct hw_key_entry))) #define PAIRWISE_TA_ENTRY(__idx) \ (PAIRWISE_TA_TABLE_BASE + \ ((__idx) * sizeof(struct hw_pairwise_ta_entry))) struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; u8 rx_mic[8]; } __packed; struct hw_pairwise_ta_entry { u8 address[6]; u8 cipher; u8 reserved; } __packed; /* * Other on-chip shared memory space. */ #define HW_CIS_BASE 0x2000 #define HW_NULL_BASE 0x2b00 /* * Since NULL frame won't be that long (256 byte), * We steal 16 tail bytes to save debugging settings. */ #define HW_DEBUG_SETTING_BASE 0x2bf0 /* * On-chip BEACON frame space. */ #define HW_BEACON_BASE0 0x2c00 #define HW_BEACON_BASE1 0x2d00 #define HW_BEACON_BASE2 0x2e00 #define HW_BEACON_BASE3 0x2f00 #define HW_BEACON_OFFSET(__index) \ (HW_BEACON_BASE0 + (__index * 0x0100)) /* * HOST-MCU shared memory. */ /* * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. */ #define H2M_MAILBOX_CSR 0x2100 #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) /* * MCU_LEDCS: LED control for MCU Mailbox. */ #define MCU_LEDCS_LED_MODE FIELD16(0x001f) #define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) #define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) #define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) #define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) #define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) #define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) #define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) #define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) #define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) #define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) #define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) /* * M2H_CMD_DONE_CSR. */ #define M2H_CMD_DONE_CSR 0x2104 /* * MCU_TXOP_ARRAY_BASE. */ #define MCU_TXOP_ARRAY_BASE 0x2110 /* * MAC Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ /* * MAC_CSR0: ASIC revision number. */ #define MAC_CSR0 0x3000 #define MAC_CSR0_REVISION FIELD32(0x0000000f) #define MAC_CSR0_CHIPSET FIELD32(0x000ffff0) /* * MAC_CSR1: System control register. * SOFT_RESET: Software reset bit, 1: reset, 0: normal. * BBP_RESET: Hardware reset BBP. * HOST_READY: Host is ready after initialization, 1: ready. */ #define MAC_CSR1 0x3004 #define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) #define MAC_CSR1_BBP_RESET FIELD32(0x00000002) #define MAC_CSR1_HOST_READY FIELD32(0x00000004) /* * MAC_CSR2: STA MAC register 0. */ #define MAC_CSR2 0x3008 #define MAC_CSR2_BYTE0 FIELD32(0x000000ff) #define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) #define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) #define MAC_CSR2_BYTE3 FIELD32(0xff000000) /* * MAC_CSR3: STA MAC register 1. * UNICAST_TO_ME_MASK: * Used to mask off bits from byte 5 of the MAC address * to determine the UNICAST_TO_ME bit for RX frames. * The full mask is complemented by BSS_ID_MASK: * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK */ #define MAC_CSR3 0x300c #define MAC_CSR3_BYTE4 FIELD32(0x000000ff) #define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) #define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) /* * MAC_CSR4: BSSID register 0. */ #define MAC_CSR4 0x3010 #define MAC_CSR4_BYTE0 FIELD32(0x000000ff) #define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) #define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) #define MAC_CSR4_BYTE3 FIELD32(0xff000000) /* * MAC_CSR5: BSSID register 1. * BSS_ID_MASK: * This mask is used to mask off bits 0 and 1 of byte 5 of the * BSSID. This will make sure that those bits will be ignored * when determining the MY_BSS of RX frames. * 0: 1-BSSID mode (BSS index = 0) * 1: 2-BSSID mode (BSS index: Byte5, bit 0) * 2: 2-BSSID mode (BSS index: byte5, bit 1) * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1) */ #define MAC_CSR5 0x3014 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff) #define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) #define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) /* * MAC_CSR6: Maximum frame length register. */ #define MAC_CSR6 0x3018 #define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) /* * MAC_CSR7: Reserved */ #define MAC_CSR7 0x301c /* * MAC_CSR8: SIFS/EIFS register. * All units are in US. */ #define MAC_CSR8 0x3020 #define MAC_CSR8_SIFS FIELD32(0x000000ff) #define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) #define MAC_CSR8_EIFS FIELD32(0xffff0000) /* * MAC_CSR9: Back-Off control register. * SLOT_TIME: Slot time, default is 20us for 802.11BG. * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. */ #define MAC_CSR9 0x3024 #define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) #define MAC_CSR9_CWMIN FIELD32(0x00000f00) #define MAC_CSR9_CWMAX FIELD32(0x0000f000) #define MAC_CSR9_CW_SELECT FIELD32(0x00010000) /* * MAC_CSR10: Power state configuration. */ #define MAC_CSR10 0x3028 /* * MAC_CSR11: Power saving transition time register. * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. * WAKEUP_LATENCY: In unit of TU. */ #define MAC_CSR11 0x302c #define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) #define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) #define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) #define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) /* * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). * CURRENT_STATE: 0:sleep, 1:awake. * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. */ #define MAC_CSR12 0x3030 #define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) #define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) #define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) #define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) /* * MAC_CSR13: GPIO. * MAC_CSR13_VALx: GPIO value * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input */ #define MAC_CSR13 0x3034 #define MAC_CSR13_VAL0 FIELD32(0x00000001) #define MAC_CSR13_VAL1 FIELD32(0x00000002) #define MAC_CSR13_VAL2 FIELD32(0x00000004) #define MAC_CSR13_VAL3 FIELD32(0x00000008) #define MAC_CSR13_VAL4 FIELD32(0x00000010) #define MAC_CSR13_VAL5 FIELD32(0x00000020) #define MAC_CSR13_DIR0 FIELD32(0x00000100) #define MAC_CSR13_DIR1 FIELD32(0x00000200) #define MAC_CSR13_DIR2 FIELD32(0x00000400) #define MAC_CSR13_DIR3 FIELD32(0x00000800) #define MAC_CSR13_DIR4 FIELD32(0x00001000) #define MAC_CSR13_DIR5 FIELD32(0x00002000) /* * MAC_CSR14: LED control register. * ON_PERIOD: On period, default 70ms. * OFF_PERIOD: Off period, default 30ms. * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. * SW_LED: s/w LED, 1: ON, 0: OFF. * HW_LED_POLARITY: 0: active low, 1: active high. */ #define MAC_CSR14 0x3038 #define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) #define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) #define MAC_CSR14_HW_LED FIELD32(0x00010000) #define MAC_CSR14_SW_LED FIELD32(0x00020000) #define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) #define MAC_CSR14_SW_LED2 FIELD32(0x00080000) /* * MAC_CSR15: NAV control. */ #define MAC_CSR15 0x303c /* * TXRX control registers. * Some values are set in TU, whereas 1 TU == 1024 us. */ /* * TXRX_CSR0: TX/RX configuration register. * TSF_OFFSET: Default is 24. * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. * DISABLE_RX: Disable Rx engine. * DROP_CRC: Drop CRC error. * DROP_PHYSICAL: Drop physical error. * DROP_CONTROL: Drop control frame. * DROP_NOT_TO_ME: Drop not to me unicast frame. * DROP_TO_DS: Drop fram ToDs bit is true. * DROP_VERSION_ERROR: Drop version error frame. * DROP_MULTICAST: Drop multicast frames. * DROP_BORADCAST: Drop broadcast frames. * DROP_ACK_CTS: Drop received ACK and CTS. */ #define TXRX_CSR0 0x3040 #define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) #define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) #define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) #define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) #define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) #define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) #define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) #define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) #define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) #define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) #define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) #define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000) #define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) #define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) /* * TXRX_CSR1 */ #define TXRX_CSR1 0x3044 #define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) #define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) #define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) #define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) #define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) #define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) #define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) #define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) /* * TXRX_CSR2 */ #define TXRX_CSR2 0x3048 #define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) #define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) #define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) #define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) #define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) #define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) #define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) #define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) /* * TXRX_CSR3 */ #define TXRX_CSR3 0x304c #define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) #define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) #define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) #define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) #define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) #define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) #define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) #define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) /* * TXRX_CSR4: Auto-Responder/Tx-retry register. * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. * OFDM_TX_RATE_DOWN: 1:enable. * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. */ #define TXRX_CSR4 0x3050 #define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) #define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) #define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) #define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) #define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) #define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) #define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) #define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) #define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) #define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) /* * TXRX_CSR5 */ #define TXRX_CSR5 0x3054 /* * TXRX_CSR6: ACK/CTS payload consumed time */ #define TXRX_CSR6 0x3058 /* * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. */ #define TXRX_CSR7 0x305c #define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) #define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) #define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) #define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) /* * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. */ #define TXRX_CSR8 0x3060 #define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) #define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) #define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) #define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) /* * TXRX_CSR9: Synchronization control register. * BEACON_INTERVAL: In unit of 1/16 TU. * TSF_TICKING: Enable TSF auto counting. * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. * BEACON_GEN: Enable beacon generator. */ #define TXRX_CSR9 0x3064 #define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) #define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) #define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) #define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) #define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) #define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) /* * TXRX_CSR10: BEACON alignment. */ #define TXRX_CSR10 0x3068 /* * TXRX_CSR11: AES mask. */ #define TXRX_CSR11 0x306c /* * TXRX_CSR12: TSF low 32. */ #define TXRX_CSR12 0x3070 #define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) /* * TXRX_CSR13: TSF high 32. */ #define TXRX_CSR13 0x3074 #define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) /* * TXRX_CSR14: TBTT timer. */ #define TXRX_CSR14 0x3078 /* * TXRX_CSR15: TKIP MIC priority byte "AND" mask. */ #define TXRX_CSR15 0x307c /* * PHY control registers. * Some values are set in TU, whereas 1 TU == 1024 us. */ /* * PHY_CSR0: RF/PS control. */ #define PHY_CSR0 0x3080 #define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) #define PHY_CSR0_PA_PE_A FIELD32(0x00020000) /* * PHY_CSR1 */ #define PHY_CSR1 0x3084 /* * PHY_CSR2: Pre-TX BBP control. */ #define PHY_CSR2 0x3088 /* * PHY_CSR3: BBP serial control register. * VALUE: Register value to program into BBP. * REG_NUM: Selected BBP register. * READ_CONTROL: 0: Write BBP, 1: Read BBP. * BUSY: 1: ASIC is busy execute BBP programming. */ #define PHY_CSR3 0x308c #define PHY_CSR3_VALUE FIELD32(0x000000ff) #define PHY_CSR3_REGNUM FIELD32(0x00007f00) #define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) #define PHY_CSR3_BUSY FIELD32(0x00010000) /* * PHY_CSR4: RF serial control register * VALUE: Register value (include register id) serial out to RF/IF chip. * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). * IF_SELECT: 1: select IF to program, 0: select RF to program. * PLL_LD: RF PLL_LD status. * BUSY: 1: ASIC is busy execute RF programming. */ #define PHY_CSR4 0x3090 #define PHY_CSR4_VALUE FIELD32(0x00ffffff) #define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) #define PHY_CSR4_IF_SELECT FIELD32(0x20000000) #define PHY_CSR4_PLL_LD FIELD32(0x40000000) #define PHY_CSR4_BUSY FIELD32(0x80000000) /* * PHY_CSR5: RX to TX signal switch timing control. */ #define PHY_CSR5 0x3094 #define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) /* * PHY_CSR6: TX to RX signal timing control. */ #define PHY_CSR6 0x3098 #define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) /* * PHY_CSR7: TX DAC switching timing control. */ #define PHY_CSR7 0x309c /* * Security control register. */ /* * SEC_CSR0: Shared key table control. */ #define SEC_CSR0 0x30a0 #define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) #define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) #define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) #define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) #define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) #define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) #define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) #define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) #define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) #define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) #define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) #define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) #define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) #define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) #define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) #define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) /* * SEC_CSR1: Shared key table security mode register. */ #define SEC_CSR1 0x30a4 #define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) #define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) #define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) #define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) #define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) #define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) #define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) #define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) /* * Pairwise key table valid bitmap registers. * SEC_CSR2: pairwise key table valid bitmap 0. * SEC_CSR3: pairwise key table valid bitmap 1. */ #define SEC_CSR2 0x30a8 #define SEC_CSR3 0x30ac /* * SEC_CSR4: Pairwise key table lookup control. */ #define SEC_CSR4 0x30b0 #define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) #define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) #define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) #define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) /* * SEC_CSR5: shared key table security mode register. */ #define SEC_CSR5 0x30b4 #define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) #define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) #define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) #define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) #define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) #define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) #define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) #define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) /* * STA control registers. */ /* * STA_CSR0: RX PLCP error count & RX FCS error count. */ #define STA_CSR0 0x30c0 #define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) #define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) /* * STA_CSR1: RX False CCA count & RX LONG frame count. */ #define STA_CSR1 0x30c4 #define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) #define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) /* * STA_CSR2: TX Beacon count and RX FIFO overflow count. */ #define STA_CSR2 0x30c8 #define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) #define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) /* * STA_CSR3: TX Beacon count. */ #define STA_CSR3 0x30cc #define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) /* * STA_CSR4: TX Result status register. * VALID: 1:This register contains a valid TX result. */ #define STA_CSR4 0x30d0 #define STA_CSR4_VALID FIELD32(0x00000001) #define STA_CSR4_TX_RESULT FIELD32(0x0000000e) #define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0) #define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00) #define STA_CSR4_PID_TYPE FIELD32(0x0000e000) #define STA_CSR4_TXRATE FIELD32(0x000f0000) /* * QOS control registers. */ /* * QOS_CSR0: TXOP holder MAC address register. */ #define QOS_CSR0 0x30e0 #define QOS_CSR0_BYTE0 FIELD32(0x000000ff) #define QOS_CSR0_BYTE1 FIELD32(0x0000ff00) #define QOS_CSR0_BYTE2 FIELD32(0x00ff0000) #define QOS_CSR0_BYTE3 FIELD32(0xff000000) /* * QOS_CSR1: TXOP holder MAC address register. */ #define QOS_CSR1 0x30e4 #define QOS_CSR1_BYTE4 FIELD32(0x000000ff) #define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) /* * QOS_CSR2: TXOP holder timeout register. */ #define QOS_CSR2 0x30e8 /* * RX QOS-CFPOLL MAC address register. * QOS_CSR3: RX QOS-CFPOLL MAC address 0. * QOS_CSR4: RX QOS-CFPOLL MAC address 1. */ #define QOS_CSR3 0x30ec #define QOS_CSR4 0x30f0 /* * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. */ #define QOS_CSR5 0x30f4 /* * Host DMA registers. */ /* * AC0_BASE_CSR: AC_VO base address. */ #define AC0_BASE_CSR 0x3400 #define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) /* * AC1_BASE_CSR: AC_VI base address. */ #define AC1_BASE_CSR 0x3404 #define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) /* * AC2_BASE_CSR: AC_BE base address. */ #define AC2_BASE_CSR 0x3408 #define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) /* * AC3_BASE_CSR: AC_BK base address. */ #define AC3_BASE_CSR 0x340c #define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) /* * MGMT_BASE_CSR: MGMT ring base address. */ #define MGMT_BASE_CSR 0x3410 #define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) /* * TX_RING_CSR0: TX Ring size for AC_VO, AC_VI, AC_BE, AC_BK. */ #define TX_RING_CSR0 0x3418 #define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff) #define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00) #define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000) #define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000) /* * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring * TXD_SIZE: In unit of 32-bit. */ #define TX_RING_CSR1 0x341c #define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff) #define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00) #define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000) /* * AIFSN_CSR: AIFSN for each EDCA AC. * AIFSN0: For AC_VO. * AIFSN1: For AC_VI. * AIFSN2: For AC_BE. * AIFSN3: For AC_BK. */ #define AIFSN_CSR 0x3420 #define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) #define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) #define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) #define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) /* * CWMIN_CSR: CWmin for each EDCA AC. * CWMIN0: For AC_VO. * CWMIN1: For AC_VI. * CWMIN2: For AC_BE. * CWMIN3: For AC_BK. */ #define CWMIN_CSR 0x3424 #define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) #define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) #define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) #define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) /* * CWMAX_CSR: CWmax for each EDCA AC. * CWMAX0: For AC_VO. * CWMAX1: For AC_VI. * CWMAX2: For AC_BE. * CWMAX3: For AC_BK. */ #define CWMAX_CSR 0x3428 #define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) #define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) #define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) #define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) /* * TX_DMA_DST_CSR: TX DMA destination * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid */ #define TX_DMA_DST_CSR 0x342c #define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003) #define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c) #define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030) #define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0) #define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300) /* * TX_CNTL_CSR: KICK/Abort TX. * KICK_TX_AC0: For AC_VO. * KICK_TX_AC1: For AC_VI. * KICK_TX_AC2: For AC_BE. * KICK_TX_AC3: For AC_BK. * ABORT_TX_AC0: For AC_VO. * ABORT_TX_AC1: For AC_VI. * ABORT_TX_AC2: For AC_BE. * ABORT_TX_AC3: For AC_BK. */ #define TX_CNTL_CSR 0x3430 #define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001) #define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002) #define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004) #define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008) #define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010) #define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000) #define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000) #define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000) #define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000) #define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000) /* * LOAD_TX_RING_CSR: Load RX desriptor */ #define LOAD_TX_RING_CSR 0x3434 #define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001) #define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002) #define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004) #define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008) #define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010) /* * Several read-only registers, for debugging. */ #define AC0_TXPTR_CSR 0x3438 #define AC1_TXPTR_CSR 0x343c #define AC2_TXPTR_CSR 0x3440 #define AC3_TXPTR_CSR 0x3444 #define MGMT_TXPTR_CSR 0x3448 /* * RX_BASE_CSR */ #define RX_BASE_CSR 0x3450 #define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) /* * RX_RING_CSR. * RXD_SIZE: In unit of 32-bit. */ #define RX_RING_CSR 0x3454 #define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff) #define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00) #define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000) /* * RX_CNTL_CSR */ #define RX_CNTL_CSR 0x3458 #define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001) #define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002) /* * RXPTR_CSR: Read-only, for debugging. */ #define RXPTR_CSR 0x345c /* * PCI_CFG_CSR */ #define PCI_CFG_CSR 0x3460 /* * BUF_FORMAT_CSR */ #define BUF_FORMAT_CSR 0x3464 /* * INT_SOURCE_CSR: Interrupt source register. * Write one to clear corresponding bit. */ #define INT_SOURCE_CSR 0x3468 #define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001) #define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002) #define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004) #define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010) #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000) #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000) #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000) #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000) #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000) #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000) /* * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock. */ #define INT_MASK_CSR 0x346c #define INT_MASK_CSR_TXDONE FIELD32(0x00000001) #define INT_MASK_CSR_RXDONE FIELD32(0x00000002) #define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004) #define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010) #define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080) #define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00) #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000) #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000) #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000) #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000) #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000) #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000) /* * E2PROM_CSR: EEPROM control register. * RELOAD: Write 1 to reload eeprom content. * TYPE_93C46: 1: 93c46, 0:93c66. * LOAD_STATUS: 1:loading, 0:done. */ #define E2PROM_CSR 0x3470 #define E2PROM_CSR_RELOAD FIELD32(0x00000001) #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002) #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004) #define E2PROM_CSR_DATA_IN FIELD32(0x00000008) #define E2PROM_CSR_DATA_OUT FIELD32(0x00000010) #define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020) #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) /* * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register. * AC0_TX_OP: For AC_VO, in unit of 32us. * AC1_TX_OP: For AC_VI, in unit of 32us. */ #define AC_TXOP_CSR0 0x3474 #define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) #define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) /* * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register. * AC2_TX_OP: For AC_BE, in unit of 32us. * AC3_TX_OP: For AC_BK, in unit of 32us. */ #define AC_TXOP_CSR1 0x3478 #define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) #define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) /* * DMA_STATUS_CSR */ #define DMA_STATUS_CSR 0x3480 /* * TEST_MODE_CSR */ #define TEST_MODE_CSR 0x3484 /* * UART0_TX_CSR */ #define UART0_TX_CSR 0x3488 /* * UART0_RX_CSR */ #define UART0_RX_CSR 0x348c /* * UART0_FRAME_CSR */ #define UART0_FRAME_CSR 0x3490 /* * UART0_BUFFER_CSR */ #define UART0_BUFFER_CSR 0x3494 /* * IO_CNTL_CSR * RF_PS: Set RF interface value to power save */ #define IO_CNTL_CSR 0x3498 #define IO_CNTL_CSR_RF_PS FIELD32(0x00000004) /* * UART_INT_SOURCE_CSR */ #define UART_INT_SOURCE_CSR 0x34a8 /* * UART_INT_MASK_CSR */ #define UART_INT_MASK_CSR 0x34ac /* * PBF_QUEUE_CSR */ #define PBF_QUEUE_CSR 0x34b0 /* * Firmware DMA registers. * Firmware DMA registers are dedicated for MCU usage * and should not be touched by host driver. * Therefore we skip the definition of these registers. */ #define FW_TX_BASE_CSR 0x34c0 #define FW_TX_START_CSR 0x34c4 #define FW_TX_LAST_CSR 0x34c8 #define FW_MODE_CNTL_CSR 0x34cc #define FW_TXPTR_CSR 0x34d0 /* * 8051 firmware image. */ #define FIRMWARE_RT2561 "rt2561.bin" #define FIRMWARE_RT2561s "rt2561s.bin" #define FIRMWARE_RT2661 "rt2661.bin" #define FIRMWARE_IMAGE_BASE 0x4000 /* * BBP registers. * The wordsize of the BBP is 8 bits. */ /* * R2 */ #define BBP_R2_BG_MODE FIELD8(0x20) /* * R3 */ #define BBP_R3_SMART_MODE FIELD8(0x01) /* * R4: RX antenna control * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) */ /* * ANTENNA_CONTROL semantics (guessed): * 0x1: Software controlled antenna switching (fixed or SW diversity) * 0x2: Hardware diversity. */ #define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03) #define BBP_R4_RX_FRAME_END FIELD8(0x20) /* * R77 */ #define BBP_R77_RX_ANTENNA FIELD8(0x03) /* * RF registers */ /* * RF 3 */ #define RF3_TXPOWER FIELD32(0x00003e00) /* * RF 4 */ #define RF4_FREQ_OFFSET FIELD32(0x0003f000) /* * EEPROM content. * The wordsize of the EEPROM is 16 bits. */ /* * HW MAC address. */ #define EEPROM_MAC_ADDR_0 0x0002 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) #define EEPROM_MAC_ADDR1 0x0003 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) #define EEPROM_MAC_ADDR_2 0x0004 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) /* * EEPROM antenna. * ANTENNA_NUM: Number of antenna's. * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. * DYN_TXAGC: Dynamic TX AGC control. * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. * RF_TYPE: Rf_type of this adapter. */ #define EEPROM_ANTENNA 0x0010 #define EEPROM_ANTENNA_NUM FIELD16(0x0003) #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) #define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) /* * EEPROM NIC config. * ENABLE_DIVERSITY: 1:enable, 0:disable. * EXTERNAL_LNA_BG: External LNA enable for 2.4G. * CARDBUS_ACCEL: 0:enable, 1:disable. * EXTERNAL_LNA_A: External LNA enable for 5G. */ #define EEPROM_NIC 0x0011 #define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001) #define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002) #define EEPROM_NIC_RX_FIXED FIELD16(0x0004) #define EEPROM_NIC_TX_FIXED FIELD16(0x0008) #define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010) #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020) #define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040) /* * EEPROM geography. * GEO_A: Default geographical setting for 5GHz band * GEO: Default geographical setting. */ #define EEPROM_GEOGRAPHY 0x0012 #define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) #define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) /* * EEPROM BBP. */ #define EEPROM_BBP_START 0x0013 #define EEPROM_BBP_SIZE 16 #define EEPROM_BBP_VALUE FIELD16(0x00ff) #define EEPROM_BBP_REG_ID FIELD16(0xff00) /* * EEPROM TXPOWER 802.11G */ #define EEPROM_TXPOWER_G_START 0x0023 #define EEPROM_TXPOWER_G_SIZE 7 #define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) #define EEPROM_TXPOWER_G_2 FIELD16(0xff00) /* * EEPROM Frequency */ #define EEPROM_FREQ 0x002f #define EEPROM_FREQ_OFFSET FIELD16(0x00ff) #define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) #define EEPROM_FREQ_SEQ FIELD16(0x0300) /* * EEPROM LED. * POLARITY_RDY_G: Polarity RDY_G setting. * POLARITY_RDY_A: Polarity RDY_A setting. * POLARITY_ACT: Polarity ACT setting. * POLARITY_GPIO_0: Polarity GPIO0 setting. * POLARITY_GPIO_1: Polarity GPIO1 setting. * POLARITY_GPIO_2: Polarity GPIO2 setting. * POLARITY_GPIO_3: Polarity GPIO3 setting. * POLARITY_GPIO_4: Polarity GPIO4 setting. * LED_MODE: Led mode. */ #define EEPROM_LED 0x0030 #define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) #define EEPROM_LED_LED_MODE FIELD16(0x1f00) /* * EEPROM TXPOWER 802.11A */ #define EEPROM_TXPOWER_A_START 0x0031 #define EEPROM_TXPOWER_A_SIZE 12 #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) #define EEPROM_TXPOWER_A_2 FIELD16(0xff00) /* * EEPROM RSSI offset 802.11BG */ #define EEPROM_RSSI_OFFSET_BG 0x004d #define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) #define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) /* * EEPROM RSSI offset 802.11A */ #define EEPROM_RSSI_OFFSET_A 0x004e #define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) #define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) /* * MCU mailbox commands. */ #define MCU_SLEEP 0x30 #define MCU_WAKEUP 0x31 #define MCU_LED 0x50 #define MCU_LED_STRENGTH 0x52 /* * DMA descriptor defines. */ #define TXD_DESC_SIZE (16 * sizeof(__le32)) #define TXINFO_SIZE (6 * sizeof(__le32)) #define RXD_DESC_SIZE (16 * sizeof(__le32)) /* * TX descriptor format for TX, PRIO and Beacon Ring. */ /* * Word0 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. * KEY_TABLE: Use per-client pairwise KEY table. * KEY_INDEX: * Key index (0~31) to the pairwise KEY table. * 0~3 to shared KEY table 0 (BSS0). * 4~7 to shared KEY table 1 (BSS1). * 8~11 to shared KEY table 2 (BSS2). * 12~15 to shared KEY table 3 (BSS3). * BURST: Next frame belongs to same "burst" event. */ #define TXD_W0_OWNER_NIC FIELD32(0x00000001) #define TXD_W0_VALID FIELD32(0x00000002) #define TXD_W0_MORE_FRAG FIELD32(0x00000004) #define TXD_W0_ACK FIELD32(0x00000008) #define TXD_W0_TIMESTAMP FIELD32(0x00000010) #define TXD_W0_OFDM FIELD32(0x00000020) #define TXD_W0_IFS FIELD32(0x00000040) #define TXD_W0_RETRY_MODE FIELD32(0x00000080) #define TXD_W0_TKIP_MIC FIELD32(0x00000100) #define TXD_W0_KEY_TABLE FIELD32(0x00000200) #define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) #define TXD_W0_BURST FIELD32(0x10000000) #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) /* * Word1 * HOST_Q_ID: EDCA/HCCA queue ID. * HW_SEQUENCE: MAC overwrites the frame sequence number. * BUFFER_COUNT: Number of buffers in this TXD. */ #define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) #define TXD_W1_AIFSN FIELD32(0x000000f0) #define TXD_W1_CWMIN FIELD32(0x00000f00) #define TXD_W1_CWMAX FIELD32(0x0000f000) #define TXD_W1_IV_OFFSET FIELD32(0x003f0000) #define TXD_W1_PIGGY_BACK FIELD32(0x01000000) #define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) #define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) /* * Word2: PLCP information */ #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) /* * Word3 */ #define TXD_W3_IV FIELD32(0xffffffff) /* * Word4 */ #define TXD_W4_EIV FIELD32(0xffffffff) /* * Word5 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler. * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler. * WAITING_DMA_DONE_INT: TXD been filled with data * and waiting for TxDoneISR housekeeping. */ #define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) #define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00) #define TXD_W5_PID_TYPE FIELD32(0x0000e000) #define TXD_W5_TX_POWER FIELD32(0x00ff0000) #define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) /* * the above 24-byte is called TXINFO and will be DMAed to MAC block * through TXFIFO. MAC block use this TXINFO to control the transmission * behavior of this frame. * The following fields are not used by MAC block. * They are used by DMA block and HOST driver only. * Once a frame has been DMA to ASIC, all the following fields are useless * to ASIC. */ /* * Word6-10: Buffer physical address */ #define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) #define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) #define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) #define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) #define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) /* * Word11-13: Buffer length */ #define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff) #define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000) #define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff) #define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000) #define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff) /* * Word14 */ #define TXD_W14_SK_BUFFER FIELD32(0xffffffff) /* * Word15 */ #define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff) /* * RX descriptor format for RX Ring. */ /* * Word0 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. * KEY_INDEX: Decryption key actually used. */ #define RXD_W0_OWNER_NIC FIELD32(0x00000001) #define RXD_W0_DROP FIELD32(0x00000002) #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) #define RXD_W0_MULTICAST FIELD32(0x00000008) #define RXD_W0_BROADCAST FIELD32(0x00000010) #define RXD_W0_MY_BSS FIELD32(0x00000020) #define RXD_W0_CRC_ERROR FIELD32(0x00000040) #define RXD_W0_OFDM FIELD32(0x00000080) #define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) #define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) /* * Word1 * SIGNAL: RX raw data rate reported by BBP. */ #define RXD_W1_SIGNAL FIELD32(0x000000ff) #define RXD_W1_RSSI_AGC FIELD32(0x00001f00) #define RXD_W1_RSSI_LNA FIELD32(0x00006000) #define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) /* * Word2 * IV: Received IV of originally encrypted. */ #define RXD_W2_IV FIELD32(0xffffffff) /* * Word3 * EIV: Received EIV of originally encrypted. */ #define RXD_W3_EIV FIELD32(0xffffffff) /* * Word4 * ICV: Received ICV of originally encrypted. * NOTE: This is a guess, the official definition is "reserved" */ #define RXD_W4_ICV FIELD32(0xffffffff) /* * the above 20-byte is called RXINFO and will be DMAed to MAC RX block * and passed to the HOST driver. * The following fields are for DMA block and HOST usage only. * Can't be touched by ASIC MAC block. */ /* * Word5 */ #define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) /* * Word6-15: Reserved */ #define RXD_W6_RESERVED FIELD32(0xffffffff) #define RXD_W7_RESERVED FIELD32(0xffffffff) #define RXD_W8_RESERVED FIELD32(0xffffffff) #define RXD_W9_RESERVED FIELD32(0xffffffff) #define RXD_W10_RESERVED FIELD32(0xffffffff) #define RXD_W11_RESERVED FIELD32(0xffffffff) #define RXD_W12_RESERVED FIELD32(0xffffffff) #define RXD_W13_RESERVED FIELD32(0xffffffff) #define RXD_W14_RESERVED FIELD32(0xffffffff) #define RXD_W15_RESERVED FIELD32(0xffffffff) /* * Macros for converting txpower from EEPROM to mac80211 value * and from mac80211 value to register value. */ #define MIN_TXPOWER 0 #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 #define TXPOWER_FROM_DEV(__txpower) \ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_TO_DEV(__txpower) \ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT61PCI_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1