| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Greg Kroah-Hartman | 1833 | 92.86% | 5 | 33.33% |
| Irene Zubarev | 97 | 4.91% | 2 | 13.33% |
| Lukas Wunner | 26 | 1.32% | 2 | 13.33% |
| Alexander Chiang | 7 | 0.35% | 1 | 6.67% |
| Bogicevic Sasa | 5 | 0.25% | 1 | 6.67% |
| Björn Helgaas | 4 | 0.20% | 2 | 13.33% |
| Adrian Bunk | 1 | 0.05% | 1 | 6.67% |
| Steven Cole | 1 | 0.05% | 1 | 6.67% |
| Total | 1974 | 15 |
/* SPDX-License-Identifier: GPL-2.0+ */ #ifndef __IBMPHP_H #define __IBMPHP_H /* * IBM Hot Plug Controller Driver * * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation * * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2001-2003 IBM Corp. * * All rights reserved. * * Send feedback to <gregkh@us.ibm.com> * */ #include <linux/pci_hotplug.h> extern int ibmphp_debug; #if !defined(MODULE) #define MY_NAME "ibmphpd" #else #define MY_NAME THIS_MODULE->name #endif #define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0) #define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0) #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg) #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) /* EBDA stuff */ /*********************************************************** * SLOT CAPABILITY * ***********************************************************/ #define EBDA_SLOT_133_MAX 0x20 #define EBDA_SLOT_100_MAX 0x10 #define EBDA_SLOT_66_MAX 0x02 #define EBDA_SLOT_PCIX_CAP 0x08 /************************************************************ * RESOURCE TYPE * ************************************************************/ #define EBDA_RSRC_TYPE_MASK 0x03 #define EBDA_IO_RSRC_TYPE 0x00 #define EBDA_MEM_RSRC_TYPE 0x01 #define EBDA_PFM_RSRC_TYPE 0x03 #define EBDA_RES_RSRC_TYPE 0x02 /************************************************************* * IO RESTRICTION TYPE * *************************************************************/ #define EBDA_IO_RESTRI_MASK 0x0c #define EBDA_NO_RESTRI 0x00 #define EBDA_AVO_VGA_ADDR 0x04 #define EBDA_AVO_VGA_ADDR_AND_ALIA 0x08 #define EBDA_AVO_ISA_ADDR 0x0c /************************************************************** * DEVICE TYPE DEF * **************************************************************/ #define EBDA_DEV_TYPE_MASK 0x10 #define EBDA_PCI_DEV 0x10 #define EBDA_NON_PCI_DEV 0x00 /*************************************************************** * PRIMARY DEF DEFINITION * ***************************************************************/ #define EBDA_PRI_DEF_MASK 0x20 #define EBDA_PRI_PCI_BUS_INFO 0x20 #define EBDA_NORM_DEV_RSRC_INFO 0x00 //-------------------------------------------------------------- // RIO TABLE DATA STRUCTURE //-------------------------------------------------------------- struct rio_table_hdr { u8 ver_num; u8 scal_count; u8 riodev_count; u16 offset; }; //------------------------------------------------------------- // SCALABILITY DETAIL //------------------------------------------------------------- struct scal_detail { u8 node_id; u32 cbar; u8 port0_node_connect; u8 port0_port_connect; u8 port1_node_connect; u8 port1_port_connect; u8 port2_node_connect; u8 port2_port_connect; u8 chassis_num; // struct list_head scal_detail_list; }; //-------------------------------------------------------------- // RIO DETAIL //-------------------------------------------------------------- struct rio_detail { u8 rio_node_id; u32 bbar; u8 rio_type; u8 owner_id; u8 port0_node_connect; u8 port0_port_connect; u8 port1_node_connect; u8 port1_port_connect; u8 first_slot_num; u8 status; u8 wpindex; u8 chassis_num; struct list_head rio_detail_list; }; struct opt_rio { u8 rio_type; u8 chassis_num; u8 first_slot_num; u8 middle_num; struct list_head opt_rio_list; }; struct opt_rio_lo { u8 rio_type; u8 chassis_num; u8 first_slot_num; u8 middle_num; u8 pack_count; struct list_head opt_rio_lo_list; }; /**************************************************************** * HPC DESCRIPTOR NODE * ****************************************************************/ struct ebda_hpc_list { u8 format; u16 num_ctlrs; short phys_addr; // struct list_head ebda_hpc_list; }; /***************************************************************** * IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS * * STRUCTURE * *****************************************************************/ struct ebda_hpc_slot { u8 slot_num; u32 slot_bus_num; u8 ctl_index; u8 slot_cap; }; struct ebda_hpc_bus { u32 bus_num; u8 slots_at_33_conv; u8 slots_at_66_conv; u8 slots_at_66_pcix; u8 slots_at_100_pcix; u8 slots_at_133_pcix; }; /******************************************************************** * THREE TYPE OF HOT PLUG CONTROLLER * ********************************************************************/ struct isa_ctlr_access { u16 io_start; u16 io_end; }; struct pci_ctlr_access { u8 bus; u8 dev_fun; }; struct wpeg_i2c_ctlr_access { ulong wpegbbar; u8 i2c_addr; }; #define HPC_DEVICE_ID 0x0246 #define HPC_SUBSYSTEM_ID 0x0247 #define HPC_PCI_OFFSET 0x40 /************************************************************************* * RSTC DESCRIPTOR NODE * *************************************************************************/ struct ebda_rsrc_list { u8 format; u16 num_entries; u16 phys_addr; struct ebda_rsrc_list *next; }; /*************************************************************************** * PCI RSRC NODE * ***************************************************************************/ struct ebda_pci_rsrc { u8 rsrc_type; u8 bus_num; u8 dev_fun; u32 start_addr; u32 end_addr; u8 marked; /* for NVRAM */ struct list_head ebda_pci_rsrc_list; }; /*********************************************************** * BUS_INFO DATE STRUCTURE * ***********************************************************/ struct bus_info { u8 slot_min; u8 slot_max; u8 slot_count; u8 busno; u8 controller_id; u8 current_speed; u8 current_bus_mode; u8 index; u8 slots_at_33_conv; u8 slots_at_66_conv; u8 slots_at_66_pcix; u8 slots_at_100_pcix; u8 slots_at_133_pcix; struct list_head bus_info_list; }; /*********************************************************** * GLOBAL VARIABLES * ***********************************************************/ extern struct list_head ibmphp_ebda_pci_rsrc_head; extern struct list_head ibmphp_slot_head; /*********************************************************** * FUNCTION PROTOTYPES * ***********************************************************/ void ibmphp_free_ebda_hpc_queue(void); int ibmphp_access_ebda(void); struct slot *ibmphp_get_slot_from_physical_num(u8); int ibmphp_get_total_hp_slots(void); void ibmphp_free_ibm_slot(struct slot *); void ibmphp_free_bus_info_queue(void); void ibmphp_free_ebda_pci_rsrc_queue(void); struct bus_info *ibmphp_find_same_bus_num(u32); int ibmphp_get_bus_index(u8); u16 ibmphp_get_total_controllers(void); int ibmphp_register_pci(void); /* passed parameters */ #define MEM 0 #define IO 1 #define PFMEM 2 /* bit masks */ #define RESTYPE 0x03 #define IOMASK 0x00 /* will need to take its complement */ #define MMASK 0x01 #define PFMASK 0x03 #define PCIDEVMASK 0x10 /* we should always have PCI devices */ #define PRIMARYBUSMASK 0x20 /* pci specific defines */ #define PCI_VENDOR_ID_NOTVALID 0xFFFF #define PCI_HEADER_TYPE_MULTIDEVICE 0x80 #define PCI_HEADER_TYPE_MULTIBRIDGE 0x81 #define LATENCY 0x64 #define CACHE 64 #define DEVICEENABLE 0x015F /* CPQ has 0x0157 */ #define IOBRIDGE 0x1000 /* 4k */ #define MEMBRIDGE 0x100000 /* 1M */ /* irqs */ #define SCSI_IRQ 0x09 #define LAN_IRQ 0x0A #define OTHER_IRQ 0x0B /* Data Structures */ /* type is of the form x x xx xx * | | | |_ 00 - I/O, 01 - Memory, 11 - PFMemory * | | - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid * | | VGA and their aliases, 11 - Avoid ISA * | - 1 - PCI device, 0 - non pci device * - 1 - Primary PCI Bus Information (0 if Normal device) * the IO restrictions [2:3] are only for primary buses */ /* we need this struct because there could be several resource blocks * allocated per primary bus in the EBDA */ struct range_node { int rangeno; u32 start; u32 end; struct range_node *next; }; struct bus_node { u8 busno; int noIORanges; struct range_node *rangeIO; int noMemRanges; struct range_node *rangeMem; int noPFMemRanges; struct range_node *rangePFMem; int needIOUpdate; int needMemUpdate; int needPFMemUpdate; struct resource_node *firstIO; /* first IO resource on the Bus */ struct resource_node *firstMem; /* first memory resource on the Bus */ struct resource_node *firstPFMem; /* first prefetchable memory resource on the Bus */ struct resource_node *firstPFMemFromMem; /* when run out of pfmem available, taking from Mem */ struct list_head bus_list; }; struct resource_node { int rangeno; u8 busno; u8 devfunc; u32 start; u32 end; u32 len; int type; /* MEM, IO, PFMEM */ u8 fromMem; /* this is to indicate that the range is from * from the Memory bucket rather than from PFMem */ struct resource_node *next; struct resource_node *nextRange; /* for the other mem range on bus */ }; struct res_needed { u32 mem; u32 pfmem; u32 io; u8 not_correct; /* needed for return */ int devices[32]; /* for device numbers behind this bridge */ }; /* functions */ int ibmphp_rsrc_init(void); int ibmphp_add_resource(struct resource_node *); int ibmphp_remove_resource(struct resource_node *); int ibmphp_find_resource(struct bus_node *, u32, struct resource_node **, int); int ibmphp_check_resource(struct resource_node *, u8); int ibmphp_remove_bus(struct bus_node *, u8); void ibmphp_free_resources(void); int ibmphp_add_pfmem_from_mem(struct resource_node *); struct bus_node *ibmphp_find_res_bus(u8); void ibmphp_print_test(void); /* for debugging purposes */ void ibmphp_hpc_initvars(void); int ibmphp_hpc_readslot(struct slot *, u8, u8 *); int ibmphp_hpc_writeslot(struct slot *, u8); void ibmphp_lock_operations(void); void ibmphp_unlock_operations(void); int ibmphp_hpc_start_poll_thread(void); void ibmphp_hpc_stop_poll_thread(void); //---------------------------------------------------------------------------- //---------------------------------------------------------------------------- // HPC return codes //---------------------------------------------------------------------------- #define HPC_ERROR 0xFF //----------------------------------------------------------------------------- // BUS INFO //----------------------------------------------------------------------------- #define BUS_SPEED 0x30 #define BUS_MODE 0x40 #define BUS_MODE_PCIX 0x01 #define BUS_MODE_PCI 0x00 #define BUS_SPEED_2 0x20 #define BUS_SPEED_1 0x10 #define BUS_SPEED_33 0x00 #define BUS_SPEED_66 0x01 #define BUS_SPEED_100 0x02 #define BUS_SPEED_133 0x03 #define BUS_SPEED_66PCIX 0x04 #define BUS_SPEED_66UNKNOWN 0x05 #define BUS_STATUS_AVAILABLE 0x01 #define BUS_CONTROL_AVAILABLE 0x02 #define SLOT_LATCH_REGS_SUPPORTED 0x10 #define PRGM_MODEL_REV_LEVEL 0xF0 #define MAX_ADAPTER_NONE 0x09 //---------------------------------------------------------------------------- // HPC 'write' operations/commands //---------------------------------------------------------------------------- // Command Code State Write to reg // Machine at index //------------------------- ---- ------- ------------ #define HPC_CTLR_ENABLEIRQ 0x00 // N 15 #define HPC_CTLR_DISABLEIRQ 0x01 // N 15 #define HPC_SLOT_OFF 0x02 // Y 0-14 #define HPC_SLOT_ON 0x03 // Y 0-14 #define HPC_SLOT_ATTNOFF 0x04 // N 0-14 #define HPC_SLOT_ATTNON 0x05 // N 0-14 #define HPC_CTLR_CLEARIRQ 0x06 // N 15 #define HPC_CTLR_RESET 0x07 // Y 15 #define HPC_CTLR_IRQSTEER 0x08 // N 15 #define HPC_BUS_33CONVMODE 0x09 // Y 31-34 #define HPC_BUS_66CONVMODE 0x0A // Y 31-34 #define HPC_BUS_66PCIXMODE 0x0B // Y 31-34 #define HPC_BUS_100PCIXMODE 0x0C // Y 31-34 #define HPC_BUS_133PCIXMODE 0x0D // Y 31-34 #define HPC_ALLSLOT_OFF 0x11 // Y 15 #define HPC_ALLSLOT_ON 0x12 // Y 15 #define HPC_SLOT_BLINKLED 0x13 // N 0-14 //---------------------------------------------------------------------------- // read commands //---------------------------------------------------------------------------- #define READ_SLOTSTATUS 0x01 #define READ_EXTSLOTSTATUS 0x02 #define READ_BUSSTATUS 0x03 #define READ_CTLRSTATUS 0x04 #define READ_ALLSTAT 0x05 #define READ_ALLSLOT 0x06 #define READ_SLOTLATCHLOWREG 0x07 #define READ_REVLEVEL 0x08 #define READ_HPCOPTIONS 0x09 //---------------------------------------------------------------------------- // slot status //---------------------------------------------------------------------------- #define HPC_SLOT_POWER 0x01 #define HPC_SLOT_CONNECT 0x02 #define HPC_SLOT_ATTN 0x04 #define HPC_SLOT_PRSNT2 0x08 #define HPC_SLOT_PRSNT1 0x10 #define HPC_SLOT_PWRGD 0x20 #define HPC_SLOT_BUS_SPEED 0x40 #define HPC_SLOT_LATCH 0x80 //---------------------------------------------------------------------------- // HPC_SLOT_POWER status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_POWER_OFF 0x00 #define HPC_SLOT_POWER_ON 0x01 //---------------------------------------------------------------------------- // HPC_SLOT_CONNECT status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_CONNECTED 0x00 #define HPC_SLOT_DISCONNECTED 0x01 //---------------------------------------------------------------------------- // HPC_SLOT_ATTN status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_ATTN_OFF 0x00 #define HPC_SLOT_ATTN_ON 0x01 #define HPC_SLOT_ATTN_BLINK 0x02 //---------------------------------------------------------------------------- // HPC_SLOT_PRSNT status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_EMPTY 0x00 #define HPC_SLOT_PRSNT_7 0x01 #define HPC_SLOT_PRSNT_15 0x02 #define HPC_SLOT_PRSNT_25 0x03 //---------------------------------------------------------------------------- // HPC_SLOT_PWRGD status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_PWRGD_FAULT_NONE 0x00 #define HPC_SLOT_PWRGD_GOOD 0x01 //---------------------------------------------------------------------------- // HPC_SLOT_BUS_SPEED status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_BUS_SPEED_OK 0x00 #define HPC_SLOT_BUS_SPEED_MISM 0x01 //---------------------------------------------------------------------------- // HPC_SLOT_LATCH status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_LATCH_OPEN 0x01 // NOTE : in PCI spec bit off = open #define HPC_SLOT_LATCH_CLOSED 0x00 // NOTE : in PCI spec bit on = closed //---------------------------------------------------------------------------- // extended slot status //---------------------------------------------------------------------------- #define HPC_SLOT_PCIX 0x01 #define HPC_SLOT_SPEED1 0x02 #define HPC_SLOT_SPEED2 0x04 #define HPC_SLOT_BLINK_ATTN 0x08 #define HPC_SLOT_RSRVD1 0x10 #define HPC_SLOT_RSRVD2 0x20 #define HPC_SLOT_BUS_MODE 0x40 #define HPC_SLOT_RSRVD3 0x80 //---------------------------------------------------------------------------- // HPC_XSLOT_PCIX_CAP status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_PCIX_NO 0x00 #define HPC_SLOT_PCIX_YES 0x01 //---------------------------------------------------------------------------- // HPC_XSLOT_SPEED status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_SPEED_33 0x00 #define HPC_SLOT_SPEED_66 0x01 #define HPC_SLOT_SPEED_133 0x02 //---------------------------------------------------------------------------- // HPC_XSLOT_ATTN_BLINK status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_ATTN_BLINK_OFF 0x00 #define HPC_SLOT_ATTN_BLINK_ON 0x01 //---------------------------------------------------------------------------- // HPC_XSLOT_BUS_MODE status return codes //---------------------------------------------------------------------------- #define HPC_SLOT_BUS_MODE_OK 0x00 #define HPC_SLOT_BUS_MODE_MISM 0x01 //---------------------------------------------------------------------------- // Controller status //---------------------------------------------------------------------------- #define HPC_CTLR_WORKING 0x01 #define HPC_CTLR_FINISHED 0x02 #define HPC_CTLR_RESULT0 0x04 #define HPC_CTLR_RESULT1 0x08 #define HPC_CTLR_RESULE2 0x10 #define HPC_CTLR_RESULT3 0x20 #define HPC_CTLR_IRQ_ROUTG 0x40 #define HPC_CTLR_IRQ_PENDG 0x80 //---------------------------------------------------------------------------- // HPC_CTLR_WORKING status return codes //---------------------------------------------------------------------------- #define HPC_CTLR_WORKING_NO 0x00 #define HPC_CTLR_WORKING_YES 0x01 //---------------------------------------------------------------------------- // HPC_CTLR_FINISHED status return codes //---------------------------------------------------------------------------- #define HPC_CTLR_FINISHED_NO 0x00 #define HPC_CTLR_FINISHED_YES 0x01 //---------------------------------------------------------------------------- // HPC_CTLR_RESULT status return codes //---------------------------------------------------------------------------- #define HPC_CTLR_RESULT_SUCCESS 0x00 #define HPC_CTLR_RESULT_FAILED 0x01 #define HPC_CTLR_RESULT_RSVD 0x02 #define HPC_CTLR_RESULT_NORESP 0x03 //---------------------------------------------------------------------------- // macro for slot info //---------------------------------------------------------------------------- #define SLOT_POWER(s) ((u8) ((s & HPC_SLOT_POWER) \ ? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF)) #define SLOT_CONNECT(s) ((u8) ((s & HPC_SLOT_CONNECT) \ ? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED)) #define SLOT_ATTN(s, es) ((u8) ((es & HPC_SLOT_BLINK_ATTN) \ ? HPC_SLOT_ATTN_BLINK \ : ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF))) #define SLOT_PRESENT(s) ((u8) ((s & HPC_SLOT_PRSNT1) \ ? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \ : ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7))) #define SLOT_PWRGD(s) ((u8) ((s & HPC_SLOT_PWRGD) \ ? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE)) #define SLOT_BUS_SPEED(s) ((u8) ((s & HPC_SLOT_BUS_SPEED) \ ? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK)) #define SLOT_LATCH(s) ((u8) ((s & HPC_SLOT_LATCH) \ ? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN)) #define SLOT_PCIX(es) ((u8) ((es & HPC_SLOT_PCIX) \ ? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO)) #define SLOT_SPEED(es) ((u8) ((es & HPC_SLOT_SPEED2) \ ? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133 \ : HPC_SLOT_SPEED_66) \ : HPC_SLOT_SPEED_33)) #define SLOT_BUS_MODE(es) ((u8) ((es & HPC_SLOT_BUS_MODE) \ ? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK)) //-------------------------------------------------------------------------- // macro for bus info //--------------------------------------------------------------------------- #define CURRENT_BUS_SPEED(s) ((u8) (s & BUS_SPEED_2) \ ? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \ : ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33)) #define CURRENT_BUS_MODE(s) ((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI) #define READ_BUS_STATUS(s) ((u8) (s->options & BUS_STATUS_AVAILABLE)) #define READ_BUS_MODE(s) ((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20) #define SET_BUS_STATUS(s) ((u8) (s->options & BUS_CONTROL_AVAILABLE)) #define READ_SLOT_LATCH(s) ((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED)) //---------------------------------------------------------------------------- // macro for controller info //---------------------------------------------------------------------------- #define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \ ? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO)) #define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \ ? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO)) #define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1) \ ? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \ : HPC_CTLR_RESULT_RSVD) \ : ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \ : HPC_CTLR_RESULT_SUCCESS))) // command that affect the state machine of HPC #define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF) || \ (c == HPC_SLOT_ON) || \ (c == HPC_CTLR_RESET) || \ (c == HPC_BUS_33CONVMODE) || \ (c == HPC_BUS_66CONVMODE) || \ (c == HPC_BUS_66PCIXMODE) || \ (c == HPC_BUS_100PCIXMODE) || \ (c == HPC_BUS_133PCIXMODE) || \ (c == HPC_ALLSLOT_OFF) || \ (c == HPC_ALLSLOT_ON)) /* Core part of the driver */ #define ENABLE 1 #define DISABLE 0 #define CARD_INFO 0x07 #define PCIX133 0x07 #define PCIX66 0x05 #define PCI66 0x04 extern struct pci_bus *ibmphp_pci_bus; /* Variables */ struct pci_func { struct pci_dev *dev; /* from the OS */ u8 busno; u8 device; u8 function; struct resource_node *io[6]; struct resource_node *mem[6]; struct resource_node *pfmem[6]; struct pci_func *next; int devices[32]; /* for bridge config */ u8 irq[4]; /* for interrupt config */ u8 bus; /* flag for unconfiguring, to say if PPB */ }; struct slot { u8 bus; u8 device; u8 number; u8 real_physical_slot_num; u32 capabilities; u8 supported_speed; u8 supported_bus_mode; u8 flag; /* this is for disable slot and polling */ u8 ctlr_index; struct hotplug_slot hotplug_slot; struct controller *ctrl; struct pci_func *func; u8 irq[4]; int bit_mode; /* 0 = 32, 1 = 64 */ struct bus_info *bus_on; struct list_head ibm_slot_list; u8 status; u8 ext_status; u8 busstatus; }; struct controller { struct ebda_hpc_slot *slots; struct ebda_hpc_bus *buses; struct pci_dev *ctrl_dev; /* in case where controller is PCI */ u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/ u8 ending_slot_num; u8 revision; u8 options; /* which options HPC supports */ u8 status; u8 ctlr_id; u8 slot_count; u8 bus_count; u8 ctlr_relative_id; u32 irq; union { struct isa_ctlr_access isa_ctlr; struct pci_ctlr_access pci_ctlr; struct wpeg_i2c_ctlr_access wpeg_ctlr; } u; u8 ctlr_type; struct list_head ebda_hpc_list; }; /* Functions */ int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */ int ibmphp_do_disable_slot(struct slot *slot_cur); int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be be static */ int ibmphp_configure_card(struct pci_func *, u8); int ibmphp_unconfigure_card(struct slot **, int); extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops; static inline struct slot *to_slot(struct hotplug_slot *hotplug_slot) { return container_of(hotplug_slot, struct slot, hotplug_slot); } #endif //__IBMPHP_H
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1