| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Yaniv Gardi | 750 | 100.00% | 1 | 100.00% |
| Total | 750 | 1 |
/* * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef UFS_QCOM_PHY_QMP_14NM_H_ #define UFS_QCOM_PHY_QMP_14NM_H_ #include "phy-qcom-ufs-i.h" /* QCOM UFS PHY control registers */ #define COM_OFF(x) (0x000 + x) #define PHY_OFF(x) (0xC00 + x) #define TX_OFF(n, x) (0x400 + (0x400 * n) + x) #define RX_OFF(n, x) (0x600 + (0x400 * n) + x) /* UFS PHY QSERDES COM registers */ #define QSERDES_COM_BG_TIMER COM_OFF(0x0C) #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) #define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) #define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) #define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) #define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) #define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) #define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) #define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) #define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) #define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) #define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) #define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) #define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) #define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) #define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) #define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) #define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) #define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) #define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) #define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) #define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) #define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) #define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) #define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) #define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) #define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) #define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) #define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) #define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) #define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) #define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) #define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) #define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) #define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) #define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) #define QSERDES_COM_CLK_SELECT COM_OFF(0x174) #define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) #define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) #define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) #define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) #define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) #define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) /* UFS PHY registers */ #define UFS_PHY_PHY_START PHY_OFF(0x00) #define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) #define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) /* UFS PHY TX registers */ #define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) #define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) /* UFS PHY RX registers */ #define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) #define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) #define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) #define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) #define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) #define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) #define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) #define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) #define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) #define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) /* * This structure represents the 14nm specific phy. * common_cfg MUST remain the first field in this structure * in case extra fields are added. This way, when calling * get_ufs_qcom_phy() of generic phy, we can extract the * common phy structure (struct ufs_qcom_phy) out of it * regardless of the relevant specific phy. */ struct ufs_qcom_phy_qmp_14nm { struct ufs_qcom_phy common_cfg; }; static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), }; static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), }; #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1