Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vadim Pasternak | 2710 | 99.85% | 11 | 84.62% |
Geert Uytterhoeven | 2 | 0.07% | 1 | 7.69% |
Kees Cook | 2 | 0.07% | 1 | 7.69% |
Total | 2714 | 13 |
/* * Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved. * Copyright (c) 2016-2018 Vadim Pasternak <vadimp@mellanox.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include <linux/bitops.h> #include <linux/device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_data/mlxreg.h> #include <linux/platform_device.h> #include <linux/spinlock.h> #include <linux/regmap.h> #include <linux/workqueue.h> /* Offset of event and mask registers from status register. */ #define MLXREG_HOTPLUG_EVENT_OFF 1 #define MLXREG_HOTPLUG_MASK_OFF 2 #define MLXREG_HOTPLUG_AGGR_MASK_OFF 1 /* ASIC good health mask. */ #define MLXREG_HOTPLUG_GOOD_HEALTH_MASK 0x02 #define MLXREG_HOTPLUG_ATTRS_MAX 24 #define MLXREG_HOTPLUG_NOT_ASSERT 3 /** * struct mlxreg_hotplug_priv_data - platform private data: * @irq: platform device interrupt number; * @dev: basic device; * @pdev: platform device; * @plat: platform data; * @regmap: register map handle; * @dwork_irq: delayed work template; * @lock: spin lock; * @hwmon: hwmon device; * @mlxreg_hotplug_attr: sysfs attributes array; * @mlxreg_hotplug_dev_attr: sysfs sensor device attribute array; * @group: sysfs attribute group; * @groups: list of sysfs attribute group for hwmon registration; * @cell: location of top aggregation interrupt register; * @mask: top aggregation interrupt common mask; * @aggr_cache: last value of aggregation register status; * @after_probe: flag indication probing completion; * @not_asserted: number of entries in workqueue with no signal assertion; */ struct mlxreg_hotplug_priv_data { int irq; struct device *dev; struct platform_device *pdev; struct mlxreg_hotplug_platform_data *plat; struct regmap *regmap; struct delayed_work dwork_irq; spinlock_t lock; /* sync with interrupt */ struct device *hwmon; struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1]; struct sensor_device_attribute_2 mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_MAX]; struct attribute_group group; const struct attribute_group *groups[2]; u32 cell; u32 mask; u32 aggr_cache; bool after_probe; u8 not_asserted; }; static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv, struct mlxreg_core_data *data) { struct mlxreg_core_hotplug_platform_data *pdata; /* Notify user by sending hwmon uevent. */ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE); /* * Return if adapter number is negative. It could be in case hotplug * event is not associated with hotplug device. */ if (data->hpdev.nr < 0) return 0; pdata = dev_get_platdata(&priv->pdev->dev); data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr + pdata->shift_nr); if (!data->hpdev.adapter) { dev_err(priv->dev, "Failed to get adapter for bus %d\n", data->hpdev.nr + pdata->shift_nr); return -EFAULT; } data->hpdev.client = i2c_new_device(data->hpdev.adapter, data->hpdev.brdinfo); if (!data->hpdev.client) { dev_err(priv->dev, "Failed to create client %s at bus %d at addr 0x%02x\n", data->hpdev.brdinfo->type, data->hpdev.nr + pdata->shift_nr, data->hpdev.brdinfo->addr); i2c_put_adapter(data->hpdev.adapter); data->hpdev.adapter = NULL; return -EFAULT; } return 0; } static void mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv, struct mlxreg_core_data *data) { /* Notify user by sending hwmon uevent. */ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE); if (data->hpdev.client) { i2c_unregister_device(data->hpdev.client); data->hpdev.client = NULL; } if (data->hpdev.adapter) { i2c_put_adapter(data->hpdev.adapter); data->hpdev.adapter = NULL; } } static ssize_t mlxreg_hotplug_attr_show(struct device *dev, struct device_attribute *attr, char *buf) { struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(dev); struct mlxreg_core_hotplug_platform_data *pdata; int index = to_sensor_dev_attr_2(attr)->index; int nr = to_sensor_dev_attr_2(attr)->nr; struct mlxreg_core_item *item; struct mlxreg_core_data *data; u32 regval; int ret; pdata = dev_get_platdata(&priv->pdev->dev); item = pdata->items + nr; data = item->data + index; ret = regmap_read(priv->regmap, data->reg, ®val); if (ret) return ret; if (item->health) { regval &= data->mask; } else { /* Bit = 0 : functional if item->inversed is true. */ if (item->inversed) regval = !(regval & data->mask); else regval = !!(regval & data->mask); } return sprintf(buf, "%u\n", regval); } #define PRIV_ATTR(i) priv->mlxreg_hotplug_attr[i] #define PRIV_DEV_ATTR(i) priv->mlxreg_hotplug_dev_attr[i] static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv) { struct mlxreg_core_hotplug_platform_data *pdata; struct mlxreg_core_item *item; struct mlxreg_core_data *data; int num_attrs = 0, id = 0, i, j; pdata = dev_get_platdata(&priv->pdev->dev); item = pdata->items; /* Go over all kinds of items - psu, pwr, fan. */ for (i = 0; i < pdata->counter; i++, item++) { num_attrs += item->count; data = item->data; /* Go over all units within the item. */ for (j = 0; j < item->count; j++, data++, id++) { PRIV_ATTR(id) = &PRIV_DEV_ATTR(id).dev_attr.attr; PRIV_ATTR(id)->name = devm_kasprintf(&priv->pdev->dev, GFP_KERNEL, data->label); if (!PRIV_ATTR(id)->name) { dev_err(priv->dev, "Memory allocation failed for attr %d.\n", id); return -ENOMEM; } PRIV_DEV_ATTR(id).dev_attr.attr.name = PRIV_ATTR(id)->name; PRIV_DEV_ATTR(id).dev_attr.attr.mode = 0444; PRIV_DEV_ATTR(id).dev_attr.show = mlxreg_hotplug_attr_show; PRIV_DEV_ATTR(id).nr = i; PRIV_DEV_ATTR(id).index = j; sysfs_attr_init(&PRIV_DEV_ATTR(id).dev_attr.attr); } } priv->group.attrs = devm_kcalloc(&priv->pdev->dev, num_attrs, sizeof(struct attribute *), GFP_KERNEL); if (!priv->group.attrs) return -ENOMEM; priv->group.attrs = priv->mlxreg_hotplug_attr; priv->groups[0] = &priv->group; priv->groups[1] = NULL; return 0; } static void mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv, struct mlxreg_core_item *item) { struct mlxreg_core_data *data; u32 asserted, regval, bit; int ret; /* * Validate if item related to received signal type is valid. * It should never happen, excepted the situation when some * piece of hardware is broken. In such situation just produce * error message and return. Caller must continue to handle the * signals from other devices if any. */ if (unlikely(!item)) { dev_err(priv->dev, "False signal: at offset:mask 0x%02x:0x%02x.\n", item->reg, item->mask); return; } /* Mask event. */ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, 0); if (ret) goto out; /* Read status. */ ret = regmap_read(priv->regmap, item->reg, ®val); if (ret) goto out; /* Set asserted bits and save last status. */ regval &= item->mask; asserted = item->cache ^ regval; item->cache = regval; for_each_set_bit(bit, (unsigned long *)&asserted, 8) { data = item->data + bit; if (regval & BIT(bit)) { if (item->inversed) mlxreg_hotplug_device_destroy(priv, data); else mlxreg_hotplug_device_create(priv, data); } else { if (item->inversed) mlxreg_hotplug_device_create(priv, data); else mlxreg_hotplug_device_destroy(priv, data); } } /* Acknowledge event. */ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF, 0); if (ret) goto out; /* Unmask event. */ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, item->mask); out: if (ret) dev_err(priv->dev, "Failed to complete workqueue.\n"); } static void mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv, struct mlxreg_core_item *item) { struct mlxreg_core_data *data = item->data; u32 regval; int i, ret = 0; for (i = 0; i < item->count; i++, data++) { /* Mask event. */ ret = regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF, 0); if (ret) goto out; /* Read status. */ ret = regmap_read(priv->regmap, data->reg, ®val); if (ret) goto out; regval &= data->mask; if (item->cache == regval) goto ack_event; /* * ASIC health indication is provided through two bits. Bits * value 0x2 indicates that ASIC reached the good health, value * 0x0 indicates ASIC the bad health or dormant state and value * 0x3 indicates the booting state. During ASIC reset it should * pass the following states: dormant -> booting -> good. */ if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) { if (!data->attached) { /* * ASIC is in steady state. Connect associated * device, if configured. */ mlxreg_hotplug_device_create(priv, data); data->attached = true; } } else { if (data->attached) { /* * ASIC health is failed after ASIC has been * in steady state. Disconnect associated * device, if it has been connected. */ mlxreg_hotplug_device_destroy(priv, data); data->attached = false; data->health_cntr = 0; } } item->cache = regval; ack_event: /* Acknowledge event. */ ret = regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_EVENT_OFF, 0); if (ret) goto out; /* Unmask event. */ ret = regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF, data->mask); if (ret) goto out; } out: if (ret) dev_err(priv->dev, "Failed to complete workqueue.\n"); } /* * mlxreg_hotplug_work_handler - performs traversing of device interrupt * registers according to the below hierarchy schema: * * Aggregation registers (status/mask) * PSU registers: *---* * *-----------------* | | * |status/event/mask|-----> | * | * *-----------------* | | * Power registers: | | * *-----------------* | | * |status/event/mask|-----> | * | * *-----------------* | | * FAN registers: | |--> CPU * *-----------------* | | * |status/event/mask|-----> | * | * *-----------------* | | * ASIC registers: | | * *-----------------* | | * |status/event/mask|-----> | * | * *-----------------* | | * *---* * * In case some system changed are detected: FAN in/out, PSU in/out, power * cable attached/detached, ASIC health good/bad, relevant device is created * or destroyed. */ static void mlxreg_hotplug_work_handler(struct work_struct *work) { struct mlxreg_core_hotplug_platform_data *pdata; struct mlxreg_hotplug_priv_data *priv; struct mlxreg_core_item *item; u32 regval, aggr_asserted; unsigned long flags; int i, ret; priv = container_of(work, struct mlxreg_hotplug_priv_data, dwork_irq.work); pdata = dev_get_platdata(&priv->pdev->dev); item = pdata->items; /* Mask aggregation event. */ ret = regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); if (ret < 0) goto out; /* Read aggregation status. */ ret = regmap_read(priv->regmap, pdata->cell, ®val); if (ret) goto out; regval &= pdata->mask; aggr_asserted = priv->aggr_cache ^ regval; priv->aggr_cache = regval; /* * Handler is invoked, but no assertion is detected at top aggregation * status level. Set aggr_asserted to mask value to allow handler extra * run over all relevant signals to recover any missed signal. */ if (priv->not_asserted == MLXREG_HOTPLUG_NOT_ASSERT) { priv->not_asserted = 0; aggr_asserted = pdata->mask; } if (!aggr_asserted) goto unmask_event; /* Handle topology and health configuration changes. */ for (i = 0; i < pdata->counter; i++, item++) { if (aggr_asserted & item->aggr_mask) { if (item->health) mlxreg_hotplug_health_work_helper(priv, item); else mlxreg_hotplug_work_helper(priv, item); } } spin_lock_irqsave(&priv->lock, flags); /* * It is possible, that some signals have been inserted, while * interrupt has been masked by mlxreg_hotplug_work_handler. In this * case such signals will be missed. In order to handle these signals * delayed work is canceled and work task re-scheduled for immediate * execution. It allows to handle missed signals, if any. In other case * work handler just validates that no new signals have been received * during masking. */ cancel_delayed_work(&priv->dwork_irq); schedule_delayed_work(&priv->dwork_irq, 0); spin_unlock_irqrestore(&priv->lock, flags); return; unmask_event: priv->not_asserted++; /* Unmask aggregation event (no need acknowledge). */ ret = regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask); out: if (ret) dev_err(priv->dev, "Failed to complete workqueue.\n"); } static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv) { struct mlxreg_core_hotplug_platform_data *pdata; struct mlxreg_core_item *item; int i, ret; pdata = dev_get_platdata(&priv->pdev->dev); item = pdata->items; for (i = 0; i < pdata->counter; i++, item++) { /* Clear group presense event. */ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF, 0); if (ret) goto out; /* Set group initial status as mask and unmask group event. */ if (item->inversed) { item->cache = item->mask; ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, item->mask); if (ret) goto out; } } /* Keep aggregation initial status as zero and unmask events. */ ret = regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask); if (ret) goto out; /* Keep low aggregation initial status as zero and unmask events. */ if (pdata->cell_low) { ret = regmap_write(priv->regmap, pdata->cell_low + MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask_low); if (ret) goto out; } /* Invoke work handler for initializing hot plug devices setting. */ mlxreg_hotplug_work_handler(&priv->dwork_irq.work); out: if (ret) dev_err(priv->dev, "Failed to set interrupts.\n"); enable_irq(priv->irq); return ret; } static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv) { struct mlxreg_core_hotplug_platform_data *pdata; struct mlxreg_core_item *item; struct mlxreg_core_data *data; int count, i, j; pdata = dev_get_platdata(&priv->pdev->dev); item = pdata->items; disable_irq(priv->irq); cancel_delayed_work_sync(&priv->dwork_irq); /* Mask low aggregation event, if defined. */ if (pdata->cell_low) regmap_write(priv->regmap, pdata->cell_low + MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); /* Mask aggregation event. */ regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); /* Clear topology configurations. */ for (i = 0; i < pdata->counter; i++, item++) { data = item->data; /* Mask group presense event. */ regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF, 0); /* Clear group presense event. */ regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_EVENT_OFF, 0); /* Remove all the attached devices in group. */ count = item->count; for (j = 0; j < count; j++, data++) mlxreg_hotplug_device_destroy(priv, data); } } static irqreturn_t mlxreg_hotplug_irq_handler(int irq, void *dev) { struct mlxreg_hotplug_priv_data *priv; priv = (struct mlxreg_hotplug_priv_data *)dev; /* Schedule work task for immediate execution.*/ schedule_delayed_work(&priv->dwork_irq, 0); return IRQ_HANDLED; } static int mlxreg_hotplug_probe(struct platform_device *pdev) { struct mlxreg_core_hotplug_platform_data *pdata; struct mlxreg_hotplug_priv_data *priv; struct i2c_adapter *deferred_adap; int err; pdata = dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "Failed to get platform data.\n"); return -EINVAL; } /* Defer probing if the necessary adapter is not configured yet. */ deferred_adap = i2c_get_adapter(pdata->deferred_nr); if (!deferred_adap) return -EPROBE_DEFER; i2c_put_adapter(deferred_adap); priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; if (pdata->irq) { priv->irq = pdata->irq; } else { priv->irq = platform_get_irq(pdev, 0); if (priv->irq < 0) { dev_err(&pdev->dev, "Failed to get platform irq: %d\n", priv->irq); return priv->irq; } } priv->regmap = pdata->regmap; priv->dev = pdev->dev.parent; priv->pdev = pdev; err = devm_request_irq(&pdev->dev, priv->irq, mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING | IRQF_SHARED, "mlxreg-hotplug", priv); if (err) { dev_err(&pdev->dev, "Failed to request irq: %d\n", err); return err; } disable_irq(priv->irq); spin_lock_init(&priv->lock); INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler); dev_set_drvdata(&pdev->dev, priv); err = mlxreg_hotplug_attr_init(priv); if (err) { dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", err); return err; } priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "mlxreg_hotplug", priv, priv->groups); if (IS_ERR(priv->hwmon)) { dev_err(&pdev->dev, "Failed to register hwmon device %ld\n", PTR_ERR(priv->hwmon)); return PTR_ERR(priv->hwmon); } /* Perform initial interrupts setup. */ mlxreg_hotplug_set_irq(priv); priv->after_probe = true; return 0; } static int mlxreg_hotplug_remove(struct platform_device *pdev) { struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(&pdev->dev); /* Clean interrupts setup. */ mlxreg_hotplug_unset_irq(priv); return 0; } static struct platform_driver mlxreg_hotplug_driver = { .driver = { .name = "mlxreg-hotplug", }, .probe = mlxreg_hotplug_probe, .remove = mlxreg_hotplug_remove, }; module_platform_driver(mlxreg_hotplug_driver); MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); MODULE_DESCRIPTION("Mellanox regmap hotplug platform driver"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_ALIAS("platform:mlxreg-hotplug");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1