| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds (pre-git) | 1015 | 81.92% | 8 | 34.78% |
| Russell King | 159 | 12.83% | 9 | 39.13% |
| Henrik Kretzschmar | 26 | 2.10% | 1 | 4.35% |
| Al Viro | 12 | 0.97% | 1 | 4.35% |
| Christoph Hellwig | 8 | 0.65% | 1 | 4.35% |
| Boaz Harrosh | 8 | 0.65% | 1 | 4.35% |
| Jeff Garzik | 6 | 0.48% | 1 | 4.35% |
| Lucas De Marchi | 5 | 0.40% | 1 | 4.35% |
| Total | 1239 | 23 |
/* * linux/drivers/acorn/scsi/fas216.h * * Copyright (C) 1997-2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * FAS216 generic driver */ #ifndef FAS216_H #define FAS216_H #include <scsi/scsi_eh.h> #include "queue.h" #include "msgqueue.h" /* FAS register definitions */ /* transfer count low */ #define REG_CTCL (0) #define REG_STCL (0) /* transfer count medium */ #define REG_CTCM (1) #define REG_STCM (1) /* fifo data */ #define REG_FF (2) /* command */ #define REG_CMD (3) #define CMD_NOP 0x00 #define CMD_FLUSHFIFO 0x01 #define CMD_RESETCHIP 0x02 #define CMD_RESETSCSI 0x03 #define CMD_TRANSFERINFO 0x10 #define CMD_INITCMDCOMPLETE 0x11 #define CMD_MSGACCEPTED 0x12 #define CMD_PADBYTES 0x18 #define CMD_SETATN 0x1a #define CMD_RSETATN 0x1b #define CMD_SELECTWOATN 0x41 #define CMD_SELECTATN 0x42 #define CMD_SELECTATNSTOP 0x43 #define CMD_ENABLESEL 0x44 #define CMD_DISABLESEL 0x45 #define CMD_SELECTATN3 0x46 #define CMD_RESEL3 0x47 #define CMD_WITHDMA 0x80 /* status register (read) */ #define REG_STAT (4) #define STAT_IO (1 << 0) /* IO phase */ #define STAT_CD (1 << 1) /* CD phase */ #define STAT_MSG (1 << 2) /* MSG phase */ #define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */ #define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */ #define STAT_PARITYERROR (1 << 5) /* Parity error */ #define STAT_REALBAD (1 << 6) /* Something bad */ #define STAT_INT (1 << 7) /* Interrupt */ #define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO) #define STAT_DATAOUT (0) /* Data out */ #define STAT_DATAIN (STAT_IO) /* Data in */ #define STAT_COMMAND (STAT_CD) /* Command out */ #define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */ #define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */ #define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */ /* bus ID for select / reselect */ #define REG_SDID (4) #define BUSID(target) ((target) & 7) /* Interrupt status register (read) */ #define REG_INST (5) #define INST_SELWOATN (1 << 0) /* Select w/o ATN */ #define INST_SELATN (1 << 1) /* Select w/ATN */ #define INST_RESELECTED (1 << 2) /* Reselected */ #define INST_FUNCDONE (1 << 3) /* Function done */ #define INST_BUSSERVICE (1 << 4) /* Bus service */ #define INST_DISCONNECT (1 << 5) /* Disconnect */ #define INST_ILLEGALCMD (1 << 6) /* Illegal command */ #define INST_BUSRESET (1 << 7) /* SCSI Bus reset */ /* Timeout register (write) */ #define REG_STIM (5) /* Sequence step register (read) */ #define REG_IS (6) #define IS_BITS 0x07 #define IS_SELARB 0x00 /* Select & Arb ok */ #define IS_MSGBYTESENT 0x01 /* One byte message sent*/ #define IS_NOTCOMMAND 0x02 /* Not in command state */ #define IS_EARLYPHASE 0x03 /* Early phase change */ #define IS_COMPLETE 0x04 /* Command ok */ #define IS_SOF 0x08 /* Sync off flag */ /* Transfer period step (write) */ #define REG_STP (6) /* Synchronous Offset (write) */ #define REG_SOF (7) /* Fifo state register (read) */ #define REG_CFIS (7) #define CFIS_CF 0x1f /* Num bytes in FIFO */ #define CFIS_IS 0xe0 /* Step */ /* config register 1 */ #define REG_CNTL1 (8) #define CNTL1_CID (7 << 0) /* Chip ID */ #define CNTL1_STE (1 << 3) /* Self test enable */ #define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */ #define CNTL1_PTE (1 << 5) /* Parity test enable */ #define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */ #define CNTL1_ETM (1 << 7) /* Extended Timing Mode */ /* Clock conversion factor (read) */ #define REG_CLKF (9) #define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */ #define CLKF_F10MHZ 0x02 /* 10 MHz */ #define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */ #define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */ #define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */ #define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */ #define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */ /* Chip test register (write) */ #define REG_FTM (10) #define TEST_FTM 0x01 /* Force target mode */ #define TEST_FIM 0x02 /* Force initiator mode */ #define TEST_FHI 0x04 /* Force high impedance mode */ /* Configuration register 2 (read/write) */ #define REG_CNTL2 (11) #define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */ #define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */ #define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */ #define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */ #define CNTL2_TSDR (1 << 4) /* Tristate DREQ */ #define CNTL2_SBO (1 << 5) /* Select Byte Order */ #define CNTL2_ENF (1 << 6) /* Enable features */ #define CNTL2_DAE (1 << 7) /* Data Alignment Enable */ /* Configuration register 3 (read/write) */ #define REG_CNTL3 (12) #define CNTL3_BS8 (1 << 0) /* Burst size 8 */ #define CNTL3_MDM (1 << 1) /* Modify DMA mode */ #define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */ #define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */ #define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */ #define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */ #define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */ #define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */ /* High transfer count (read/write) */ #define REG_CTCH (14) #define REG_STCH (14) /* ID register (read only) */ #define REG_ID (14) /* Data alignment */ #define REG_DAL (15) typedef enum { PHASE_IDLE, /* we're not planning on doing anything */ PHASE_SELECTION, /* selecting a device */ PHASE_SELSTEPS, /* selection with command steps */ PHASE_COMMAND, /* command sent */ PHASE_MESSAGESENT, /* selected, and we're sending cmd */ PHASE_DATAOUT, /* data out to device */ PHASE_DATAIN, /* data in from device */ PHASE_MSGIN, /* message in from device */ PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */ PHASE_MSGOUT, /* after message out phase */ PHASE_MSGOUT_EXPECT, /* expecting message out */ PHASE_STATUS, /* status from device */ PHASE_DONE /* Command complete */ } phase_t; typedef enum { DMA_OUT, /* DMA from memory to chip */ DMA_IN /* DMA from chip to memory */ } fasdmadir_t; typedef enum { fasdma_none, /* No dma */ fasdma_pio, /* PIO mode */ fasdma_pseudo, /* Pseudo DMA */ fasdma_real_block, /* Real DMA, on block by block basis */ fasdma_real_all /* Real DMA, on request by request */ } fasdmatype_t; typedef enum { neg_wait, /* Negotiate with device */ neg_inprogress, /* Negotiation sent */ neg_complete, /* Negotiation complete */ neg_targcomplete, /* Target completed negotiation */ neg_invalid /* Negotiation not supported */ } neg_t; #define MAGIC 0x441296bdUL #define NR_MSGS 8 #define FASCAP_DMA (1 << 0) #define FASCAP_PSEUDODMA (1 << 1) typedef struct { unsigned long magic_start; spinlock_t host_lock; struct Scsi_Host *host; /* host */ struct scsi_cmnd *SCpnt; /* currently processing command */ struct scsi_cmnd *origSCpnt; /* original connecting command */ struct scsi_cmnd *reqSCpnt; /* request sense command */ struct scsi_cmnd *rstSCpnt; /* reset command */ struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */ int next_pending; /* next pending device */ /* * Error recovery */ wait_queue_head_t eh_wait; struct timer_list eh_timer; unsigned int rst_dev_status; unsigned int rst_bus_status; /* driver information */ struct { phase_t phase; /* current phase */ void __iomem *io_base; /* iomem base of FAS216 */ unsigned int io_shift; /* shift to adjust reg offsets by */ unsigned char cfg[4]; /* configuration registers */ const char *type; /* chip type */ unsigned int irq; /* interrupt */ int dma; /* dma channel */ struct scsi_pointer SCp; /* current commands data pointer */ MsgQueue_t msgs; /* message queue for connected device */ unsigned int async_stp; /* Async transfer STP value */ unsigned char msgin_fifo; /* bytes in fifo at time of message in */ unsigned char message[256]; /* last message received from device */ unsigned char disconnectable:1; /* this command can be disconnected */ unsigned char aborting:1; /* aborting command */ } scsi; /* statistics information */ struct { unsigned int queues; unsigned int removes; unsigned int fins; unsigned int reads; unsigned int writes; unsigned int miscs; unsigned int disconnects; unsigned int aborts; unsigned int bus_resets; unsigned int host_resets; } stats; /* configuration information */ struct { unsigned char clockrate; /* clock rate of FAS device (MHz) */ unsigned char select_timeout; /* timeout (R5) */ unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */ unsigned char wide_max_size; /* Maximum wide transfer size */ unsigned char cntl3; /* Control Reg 3 */ unsigned int asyncperiod; /* Async transfer period (ns) */ unsigned int capabilities; /* driver capabilities */ unsigned int disconnect_ok:1; /* Disconnects allowed? */ } ifcfg; /* queue handling */ struct { Queue_t issue; /* issue queue */ Queue_t disconnected; /* disconnected command queue */ } queues; /* per-device info */ struct fas216_device { unsigned char disconnect_ok:1; /* device can disconnect */ unsigned char parity_enabled:1; /* parity checking enabled */ unsigned char parity_check:1; /* need to check parity checking */ unsigned char period; /* sync xfer period in (*4ns) */ unsigned char stp; /* synchronous transfer period */ unsigned char sof; /* synchronous offset register */ unsigned char wide_xfer; /* currently negociated wide transfer */ neg_t sync_state; /* synchronous transfer mode */ neg_t wide_state; /* wide transfer mode */ } device[8]; unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */ /* dma */ struct { fasdmatype_t transfer_type; /* current type of DMA transfer */ fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma); void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer); void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp); } dma; /* miscellaneous */ int internal_done; /* flag to indicate request done */ struct scsi_eh_save ses; /* holds request sense restore info */ unsigned long magic_end; } FAS216_Info; /* Function: int fas216_init (struct Scsi_Host *instance) * Purpose : initialise FAS/NCR/AMD SCSI structures. * Params : instance - a driver-specific filled-out structure * Returns : 0 on success */ extern int fas216_init (struct Scsi_Host *instance); /* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev) * Purpose : initialise FAS/NCR/AMD SCSI ic. * Params : instance - a driver-specific filled-out structure * Returns : 0 on success */ extern int fas216_add (struct Scsi_Host *instance, struct device *dev); /* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt) * Purpose : queue a command for adapter to process. * Params : h - host adapter * : SCpnt - Command to queue * Returns : 0 - success, else error */ extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); /* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt) * Purpose : queue a command for adapter to process, and process it to completion. * Params : h - host adapter * : SCpnt - Command to queue * Returns : 0 - success, else error */ extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *); /* Function: irqreturn_t fas216_intr (FAS216_Info *info) * Purpose : handle interrupts from the interface to progress a command * Params : info - interface to service */ extern irqreturn_t fas216_intr (FAS216_Info *info); extern void fas216_remove (struct Scsi_Host *instance); /* Function: void fas216_release (struct Scsi_Host *instance) * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic. * Params : instance - a driver-specific filled-out structure * Returns : 0 on success */ extern void fas216_release (struct Scsi_Host *instance); extern void fas216_print_host(FAS216_Info *info, struct seq_file *m); extern void fas216_print_stats(FAS216_Info *info, struct seq_file *m); extern void fas216_print_devices(FAS216_Info *info, struct seq_file *m); /* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt) * Purpose : abort this command * Params : SCpnt - command to abort * Returns : FAILED if unable to abort */ extern int fas216_eh_abort(struct scsi_cmnd *SCpnt); /* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt) * Purpose : Reset the device associated with this command * Params : SCpnt - command specifing device to reset * Returns : FAILED if unable to reset */ extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt); /* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt) * Purpose : Reset the complete bus associated with this command * Params : SCpnt - command specifing bus to reset * Returns : FAILED if unable to reset */ extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt); /* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt) * Purpose : Reset the host associated with this command * Params : SCpnt - command specifing host to reset * Returns : FAILED if unable to reset */ extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt); #endif /* FAS216_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1