Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dan J Williams | 523 | 84.90% | 17 | 58.62% |
Jeff Skirvin | 30 | 4.87% | 3 | 10.34% |
Piotr Sawicki | 21 | 3.41% | 4 | 13.79% |
Bartek Nowakowski | 15 | 2.44% | 1 | 3.45% |
Marcin Tomczak | 12 | 1.95% | 1 | 3.45% |
Dave Jiang | 11 | 1.79% | 1 | 3.45% |
Edmund Nadolski | 4 | 0.65% | 2 | 6.90% |
Total | 616 | 29 |
/* * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _ISCI_PORT_H_ #define _ISCI_PORT_H_ #include <scsi/libsas.h> #include "isci.h" #include "sas.h" #include "phy.h" #define SCIC_SDS_DUMMY_PORT 0xFF #define PF_NOTIFY (1 << 0) #define PF_RESUME (1 << 1) struct isci_phy; struct isci_host; enum isci_status { isci_freed = 0x00, isci_starting = 0x01, isci_ready = 0x02, isci_ready_for_io = 0x03, isci_stopping = 0x04, isci_stopped = 0x05, }; /** * struct isci_port - isci direct attached sas port object * @ready_exit: several states constitute 'ready'. When exiting ready we * need to take extra port-teardown actions that are * skipped when exiting to another 'ready' state. * @logical_port_index: software port index * @physical_port_index: hardware port index * @active_phy_mask: identifies phy members * @enabled_phy_mask: phy mask for the port * that are already part of the port * @reserved_tag: * @reserved_rni: reserver for port task scheduler workaround * @started_request_count: reference count for outstanding commands * @not_ready_reason: set during state transitions and notified * @timer: timeout start/stop operations */ struct isci_port { struct isci_host *isci_host; struct list_head remote_dev_list; #define IPORT_RESET_PENDING 0 unsigned long state; enum sci_status hard_reset_status; struct sci_base_state_machine sm; bool ready_exit; u8 logical_port_index; u8 physical_port_index; u8 active_phy_mask; u8 enabled_phy_mask; u8 last_active_phy; u16 reserved_rni; u16 reserved_tag; u32 started_request_count; u32 assigned_device_count; u32 hang_detect_users; u32 not_ready_reason; struct isci_phy *phy_table[SCI_MAX_PHYS]; struct isci_host *owning_controller; struct sci_timer timer; struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; /* XXX rework: only one register, no need to replicate per-port */ u32 __iomem *port_pe_configuration_register; struct scu_viit_entry __iomem *viit_registers; }; enum sci_port_not_ready_reason_code { SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, SCIC_PORT_NOT_READY_RECONFIGURING, SCIC_PORT_NOT_READY_REASON_CODE_MAX }; struct sci_port_end_point_properties { struct sci_sas_address sas_address; struct sci_phy_proto protocols; }; struct sci_port_properties { u32 index; struct sci_port_end_point_properties local; struct sci_port_end_point_properties remote; u32 phy_mask; }; /** * enum sci_port_states - port state machine states * @SCI_PORT_STOPPED: port has successfully been stopped. In this state * no new IO operations are permitted. This state is * entered from the STOPPING state. * @SCI_PORT_STOPPING: port is in the process of stopping. In this * state no new IO operations are permitted, but * existing IO operations are allowed to complete. * This state is entered from the READY state. * @SCI_PORT_READY: port is now ready. Thus, the user is able to * perform IO operations on this port. This state is * entered from the STARTING state. * @SCI_PORT_SUB_WAITING: port is started and ready but has no active * phys. * @SCI_PORT_SUB_OPERATIONAL: port is started and ready and there is at * least one phy operational. * @SCI_PORT_SUB_CONFIGURING: port is started and there was an * add/remove phy event. This state is only * used in Automatic Port Configuration Mode * (APC) * @SCI_PORT_RESETTING: port is in the process of performing a hard * reset. Thus, the user is unable to perform IO * operations on this port. This state is entered * from the READY state. * @SCI_PORT_FAILED: port has failed a reset request. This state is * entered when a port reset request times out. This * state is entered from the RESETTING state. */ #define PORT_STATES {\ C(PORT_STOPPED),\ C(PORT_STOPPING),\ C(PORT_READY),\ C(PORT_SUB_WAITING),\ C(PORT_SUB_OPERATIONAL),\ C(PORT_SUB_CONFIGURING),\ C(PORT_RESETTING),\ C(PORT_FAILED),\ } #undef C #define C(a) SCI_##a enum sci_port_states PORT_STATES; #undef C static inline void sci_port_decrement_request_count(struct isci_port *iport) { if (WARN_ONCE(iport->started_request_count == 0, "%s: tried to decrement started_request_count past 0!?", __func__)) /* pass */; else iport->started_request_count--; } #define sci_port_active_phy(port, phy) \ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) void sci_port_construct( struct isci_port *iport, u8 port_index, struct isci_host *ihost); enum sci_status sci_port_start(struct isci_port *iport); enum sci_status sci_port_stop(struct isci_port *iport); enum sci_status sci_port_add_phy( struct isci_port *iport, struct isci_phy *iphy); enum sci_status sci_port_remove_phy( struct isci_port *iport, struct isci_phy *iphy); void sci_port_setup_transports( struct isci_port *iport, u32 device_id); void isci_port_bcn_enable(struct isci_host *, struct isci_port *); void sci_port_deactivate_phy( struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user); bool sci_port_link_detected( struct isci_port *iport, struct isci_phy *iphy); enum sci_status sci_port_get_properties( struct isci_port *iport, struct sci_port_properties *prop); enum sci_status sci_port_link_up(struct isci_port *iport, struct isci_phy *iphy); enum sci_status sci_port_link_down(struct isci_port *iport, struct isci_phy *iphy); struct isci_request; struct isci_remote_device; enum sci_status sci_port_start_io( struct isci_port *iport, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status sci_port_complete_io( struct isci_port *iport, struct isci_remote_device *idev, struct isci_request *ireq); enum sas_linkrate sci_port_get_max_allowed_speed( struct isci_port *iport); void sci_port_broadcast_change_received( struct isci_port *iport, struct isci_phy *iphy); bool sci_port_is_valid_phy_assignment( struct isci_port *iport, u32 phy_index); void sci_port_get_sas_address( struct isci_port *iport, struct sci_sas_address *sas_address); void sci_port_get_attached_sas_address( struct isci_port *iport, struct sci_sas_address *sas_address); void sci_port_set_hang_detection_timeout( struct isci_port *isci_port, u32 timeout); void isci_port_formed(struct asd_sas_phy *); void isci_port_deformed(struct asd_sas_phy *); int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); int isci_ata_check_ready(struct domain_device *dev); #endif /* !defined(_ISCI_PORT_H_) */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1