Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ganesan Ramalingam | 5445 | 97.21% | 4 | 14.29% |
Andrew Lunn | 48 | 0.86% | 3 | 10.71% |
Laura Garcia Liebana | 31 | 0.55% | 5 | 17.86% |
G Pooja Shamili | 24 | 0.43% | 1 | 3.57% |
Amitoj Kaur Chawla | 11 | 0.20% | 1 | 3.57% |
Philippe Reynes | 11 | 0.20% | 1 | 3.57% |
Wei Yongjun | 6 | 0.11% | 1 | 3.57% |
Archana kumari | 6 | 0.11% | 1 | 3.57% |
Tushar Behera | 5 | 0.09% | 1 | 3.57% |
Wilfried Klaebe | 3 | 0.05% | 1 | 3.57% |
Yuval Shaia | 3 | 0.05% | 1 | 3.57% |
Tolga Ceylan | 1 | 0.02% | 1 | 3.57% |
Julia Lawall | 1 | 0.02% | 1 | 3.57% |
Madhusudhanan Ravindran | 1 | 0.02% | 1 | 3.57% |
Masanari Iida | 1 | 0.02% | 1 | 3.57% |
Alexander Duyck | 1 | 0.02% | 1 | 3.57% |
Stephen Hemminger | 1 | 0.02% | 1 | 3.57% |
Mike Kofron | 1 | 0.02% | 1 | 3.57% |
Mihaela Muraru | 1 | 0.02% | 1 | 3.57% |
Total | 5601 | 28 |
/* * Copyright (c) 2003-2012 Broadcom Corporation * All Rights Reserved * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the Broadcom * license below: * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <linux/phy.h> #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/smp.h> #include <linux/ethtool.h> #include <linux/module.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/jiffies.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <asm/mipsregs.h> /* * fmn.h - For FMN credit configuration and registering fmn_handler. * FMN is communication mechanism that allows processing agents within * XLR/XLS to communicate each other. */ #include <asm/netlogic/xlr/fmn.h> #include "platform_net.h" #include "xlr_net.h" /* * The readl/writel implementation byteswaps on XLR/XLS, so * we need to use __raw_ IO to read the NAE registers * because they are in the big-endian MMIO area on the SoC. */ static inline void xlr_nae_wreg(u32 __iomem *base, unsigned int reg, u32 val) { __raw_writel(val, base + reg); } static inline u32 xlr_nae_rdreg(u32 __iomem *base, unsigned int reg) { return __raw_readl(base + reg); } static inline void xlr_reg_update(u32 *base_addr, u32 off, u32 val, u32 mask) { u32 tmp; tmp = xlr_nae_rdreg(base_addr, off); xlr_nae_wreg(base_addr, off, (tmp & ~mask) | (val & mask)); } #define MAC_SKB_BACK_PTR_SIZE SMP_CACHE_BYTES static int send_to_rfr_fifo(struct xlr_net_priv *priv, void *addr) { struct nlm_fmn_msg msg; int ret = 0, num_try = 0, stnid; unsigned long paddr, mflags; paddr = virt_to_bus(addr); msg.msg0 = (u64)paddr & 0xffffffffe0ULL; msg.msg1 = 0; msg.msg2 = 0; msg.msg3 = 0; stnid = priv->nd->rfr_station; do { mflags = nlm_cop2_enable_irqsave(); ret = nlm_fmn_send(1, 0, stnid, &msg); nlm_cop2_disable_irqrestore(mflags); if (ret == 0) return 0; } while (++num_try < 10000); netdev_err(priv->ndev, "Send to RFR failed in RX path\n"); return ret; } static inline unsigned char *xlr_alloc_skb(void) { struct sk_buff *skb; int buf_len = sizeof(struct sk_buff *); unsigned char *skb_data; /* skb->data is cache aligned */ skb = alloc_skb(XLR_RX_BUF_SIZE, GFP_ATOMIC); if (!skb) return NULL; skb_data = skb->data; skb_put(skb, MAC_SKB_BACK_PTR_SIZE); skb_pull(skb, MAC_SKB_BACK_PTR_SIZE); memcpy(skb_data, &skb, buf_len); return skb->data; } static void xlr_net_fmn_handler(int bkt, int src_stnid, int size, int code, struct nlm_fmn_msg *msg, void *arg) { struct sk_buff *skb; void *skb_data = NULL; struct net_device *ndev; struct xlr_net_priv *priv; u32 port, length; unsigned char *addr; struct xlr_adapter *adapter = arg; length = (msg->msg0 >> 40) & 0x3fff; if (length == 0) { addr = bus_to_virt(msg->msg0 & 0xffffffffffULL); addr = addr - MAC_SKB_BACK_PTR_SIZE; skb = (struct sk_buff *)(*(unsigned long *)addr); dev_kfree_skb_any((struct sk_buff *)addr); } else { addr = (unsigned char *) bus_to_virt(msg->msg0 & 0xffffffffe0ULL); length = length - BYTE_OFFSET - MAC_CRC_LEN; port = ((int)msg->msg0) & 0x0f; addr = addr - MAC_SKB_BACK_PTR_SIZE; skb = (struct sk_buff *)(*(unsigned long *)addr); skb->dev = adapter->netdev[port]; if (!skb->dev) return; ndev = skb->dev; priv = netdev_priv(ndev); /* 16 byte IP header align */ skb_reserve(skb, BYTE_OFFSET); skb_put(skb, length); skb->protocol = eth_type_trans(skb, skb->dev); netif_rx(skb); /* Fill rx ring */ skb_data = xlr_alloc_skb(); if (skb_data) send_to_rfr_fifo(priv, skb_data); } } static struct phy_device *xlr_get_phydev(struct xlr_net_priv *priv) { return mdiobus_get_phy(priv->mii_bus, priv->phy_addr); } /* * Ethtool operation */ static int xlr_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *ecmd) { struct xlr_net_priv *priv = netdev_priv(ndev); struct phy_device *phydev = xlr_get_phydev(priv); if (!phydev) return -ENODEV; phy_ethtool_ksettings_get(phydev, ecmd); return 0; } static int xlr_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *ecmd) { struct xlr_net_priv *priv = netdev_priv(ndev); struct phy_device *phydev = xlr_get_phydev(priv); if (!phydev) return -ENODEV; return phy_ethtool_ksettings_set(phydev, ecmd); } static const struct ethtool_ops xlr_ethtool_ops = { .get_link_ksettings = xlr_get_link_ksettings, .set_link_ksettings = xlr_set_link_ksettings, }; /* * Net operations */ static int xlr_net_fill_rx_ring(struct net_device *ndev) { void *skb_data; struct xlr_net_priv *priv = netdev_priv(ndev); int i; for (i = 0; i < MAX_FRIN_SPILL / 4; i++) { skb_data = xlr_alloc_skb(); if (!skb_data) { netdev_err(ndev, "SKB allocation failed\n"); return -ENOMEM; } send_to_rfr_fifo(priv, skb_data); } netdev_info(ndev, "Rx ring setup done\n"); return 0; } static int xlr_net_open(struct net_device *ndev) { u32 err; struct xlr_net_priv *priv = netdev_priv(ndev); struct phy_device *phydev = xlr_get_phydev(priv); /* schedule a link state check */ phy_start(phydev); err = phy_start_aneg(phydev); if (err) { pr_err("Autoneg failed\n"); return err; } /* Setup the speed from PHY to internal reg*/ xlr_set_gmac_speed(priv); netif_tx_start_all_queues(ndev); return 0; } static int xlr_net_stop(struct net_device *ndev) { struct xlr_net_priv *priv = netdev_priv(ndev); struct phy_device *phydev = xlr_get_phydev(priv); phy_stop(phydev); netif_tx_stop_all_queues(ndev); return 0; } static void xlr_make_tx_desc(struct nlm_fmn_msg *msg, unsigned long addr, struct sk_buff *skb) { unsigned long physkb = virt_to_phys(skb); int cpu_core = nlm_core_id(); int fr_stn_id = cpu_core * 8 + XLR_FB_STN; /* FB to 6th bucket */ msg->msg0 = (((u64)1 << 63) | /* End of packet descriptor */ ((u64)127 << 54) | /* No Free back */ (u64)skb->len << 40 | /* Length of data */ ((u64)addr)); msg->msg1 = (((u64)1 << 63) | ((u64)fr_stn_id << 54) | /* Free back id */ (u64)0 << 40 | /* Set len to 0 */ ((u64)physkb & 0xffffffff)); /* 32bit address */ msg->msg2 = 0; msg->msg3 = 0; } static netdev_tx_t xlr_net_start_xmit(struct sk_buff *skb, struct net_device *ndev) { struct nlm_fmn_msg msg; struct xlr_net_priv *priv = netdev_priv(ndev); int ret; u32 flags; xlr_make_tx_desc(&msg, virt_to_phys(skb->data), skb); flags = nlm_cop2_enable_irqsave(); ret = nlm_fmn_send(2, 0, priv->tx_stnid, &msg); nlm_cop2_disable_irqrestore(flags); if (ret) dev_kfree_skb_any(skb); return NETDEV_TX_OK; } static void xlr_hw_set_mac_addr(struct net_device *ndev) { struct xlr_net_priv *priv = netdev_priv(ndev); /* set mac station address */ xlr_nae_wreg(priv->base_addr, R_MAC_ADDR0, ((ndev->dev_addr[5] << 24) | (ndev->dev_addr[4] << 16) | (ndev->dev_addr[3] << 8) | (ndev->dev_addr[2]))); xlr_nae_wreg(priv->base_addr, R_MAC_ADDR0 + 1, ((ndev->dev_addr[1] << 24) | (ndev->dev_addr[0] << 16))); xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK2, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK2 + 1, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK3, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK3 + 1, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_MAC_FILTER_CONFIG, (1 << O_MAC_FILTER_CONFIG__BROADCAST_EN) | (1 << O_MAC_FILTER_CONFIG__ALL_MCAST_EN) | (1 << O_MAC_FILTER_CONFIG__MAC_ADDR0_VALID)); if (priv->nd->phy_interface == PHY_INTERFACE_MODE_RGMII || priv->nd->phy_interface == PHY_INTERFACE_MODE_SGMII) xlr_reg_update(priv->base_addr, R_IPG_IFG, MAC_B2B_IPG, 0x7f); } static int xlr_net_set_mac_addr(struct net_device *ndev, void *data) { int err; err = eth_mac_addr(ndev, data); if (err) return err; xlr_hw_set_mac_addr(ndev); return 0; } static void xlr_set_rx_mode(struct net_device *ndev) { struct xlr_net_priv *priv = netdev_priv(ndev); u32 regval; regval = xlr_nae_rdreg(priv->base_addr, R_MAC_FILTER_CONFIG); if (ndev->flags & IFF_PROMISC) { regval |= (1 << O_MAC_FILTER_CONFIG__BROADCAST_EN) | (1 << O_MAC_FILTER_CONFIG__PAUSE_FRAME_EN) | (1 << O_MAC_FILTER_CONFIG__ALL_MCAST_EN) | (1 << O_MAC_FILTER_CONFIG__ALL_UCAST_EN); } else { regval &= ~((1 << O_MAC_FILTER_CONFIG__PAUSE_FRAME_EN) | (1 << O_MAC_FILTER_CONFIG__ALL_UCAST_EN)); } xlr_nae_wreg(priv->base_addr, R_MAC_FILTER_CONFIG, regval); } static void xlr_stats(struct net_device *ndev, struct rtnl_link_stats64 *stats) { struct xlr_net_priv *priv = netdev_priv(ndev); stats->rx_packets = xlr_nae_rdreg(priv->base_addr, RX_PACKET_COUNTER); stats->tx_packets = xlr_nae_rdreg(priv->base_addr, TX_PACKET_COUNTER); stats->rx_bytes = xlr_nae_rdreg(priv->base_addr, RX_BYTE_COUNTER); stats->tx_bytes = xlr_nae_rdreg(priv->base_addr, TX_BYTE_COUNTER); stats->tx_errors = xlr_nae_rdreg(priv->base_addr, TX_FCS_ERROR_COUNTER); stats->rx_dropped = xlr_nae_rdreg(priv->base_addr, RX_DROP_PACKET_COUNTER); stats->tx_dropped = xlr_nae_rdreg(priv->base_addr, TX_DROP_FRAME_COUNTER); stats->multicast = xlr_nae_rdreg(priv->base_addr, RX_MULTICAST_PACKET_COUNTER); stats->collisions = xlr_nae_rdreg(priv->base_addr, TX_TOTAL_COLLISION_COUNTER); stats->rx_length_errors = xlr_nae_rdreg(priv->base_addr, RX_FRAME_LENGTH_ERROR_COUNTER); stats->rx_over_errors = xlr_nae_rdreg(priv->base_addr, RX_DROP_PACKET_COUNTER); stats->rx_crc_errors = xlr_nae_rdreg(priv->base_addr, RX_FCS_ERROR_COUNTER); stats->rx_frame_errors = xlr_nae_rdreg(priv->base_addr, RX_ALIGNMENT_ERROR_COUNTER); stats->rx_fifo_errors = xlr_nae_rdreg(priv->base_addr, RX_DROP_PACKET_COUNTER); stats->rx_missed_errors = xlr_nae_rdreg(priv->base_addr, RX_CARRIER_SENSE_ERROR_COUNTER); stats->rx_errors = (stats->rx_over_errors + stats->rx_crc_errors + stats->rx_frame_errors + stats->rx_fifo_errors + stats->rx_missed_errors); stats->tx_aborted_errors = xlr_nae_rdreg(priv->base_addr, TX_EXCESSIVE_COLLISION_PACKET_COUNTER); stats->tx_carrier_errors = xlr_nae_rdreg(priv->base_addr, TX_DROP_FRAME_COUNTER); stats->tx_fifo_errors = xlr_nae_rdreg(priv->base_addr, TX_DROP_FRAME_COUNTER); } static const struct net_device_ops xlr_netdev_ops = { .ndo_open = xlr_net_open, .ndo_stop = xlr_net_stop, .ndo_start_xmit = xlr_net_start_xmit, .ndo_select_queue = dev_pick_tx_cpu_id, .ndo_set_mac_address = xlr_net_set_mac_addr, .ndo_set_rx_mode = xlr_set_rx_mode, .ndo_get_stats64 = xlr_stats, }; /* * Gmac init */ static void *xlr_config_spill(struct xlr_net_priv *priv, int reg_start_0, int reg_start_1, int reg_size, int size) { void *spill; u32 *base; unsigned long phys_addr; u32 spill_size; base = priv->base_addr; spill_size = size; spill = kmalloc(spill_size + SMP_CACHE_BYTES, GFP_ATOMIC); if (!spill) { pr_err("Unable to allocate memory for spill area!\n"); return ZERO_SIZE_PTR; } spill = PTR_ALIGN(spill, SMP_CACHE_BYTES); phys_addr = virt_to_phys(spill); dev_dbg(&priv->ndev->dev, "Allocated spill %d bytes at %lx\n", size, phys_addr); xlr_nae_wreg(base, reg_start_0, (phys_addr >> 5) & 0xffffffff); xlr_nae_wreg(base, reg_start_1, ((u64)phys_addr >> 37) & 0x07); xlr_nae_wreg(base, reg_size, spill_size); return spill; } /* * Configure the 6 FIFO's that are used by the network accelarator to * communicate with the rest of the XLx device. 4 of the FIFO's are for * packets from NA --> cpu (called Class FIFO's) and 2 are for feeding * the NA with free descriptors. */ static void xlr_config_fifo_spill_area(struct xlr_net_priv *priv) { priv->frin_spill = xlr_config_spill(priv, R_REG_FRIN_SPILL_MEM_START_0, R_REG_FRIN_SPILL_MEM_START_1, R_REG_FRIN_SPILL_MEM_SIZE, MAX_FRIN_SPILL * sizeof(u64)); priv->frout_spill = xlr_config_spill(priv, R_FROUT_SPILL_MEM_START_0, R_FROUT_SPILL_MEM_START_1, R_FROUT_SPILL_MEM_SIZE, MAX_FROUT_SPILL * sizeof(u64)); priv->class_0_spill = xlr_config_spill(priv, R_CLASS0_SPILL_MEM_START_0, R_CLASS0_SPILL_MEM_START_1, R_CLASS0_SPILL_MEM_SIZE, MAX_CLASS_0_SPILL * sizeof(u64)); priv->class_1_spill = xlr_config_spill(priv, R_CLASS1_SPILL_MEM_START_0, R_CLASS1_SPILL_MEM_START_1, R_CLASS1_SPILL_MEM_SIZE, MAX_CLASS_1_SPILL * sizeof(u64)); priv->class_2_spill = xlr_config_spill(priv, R_CLASS2_SPILL_MEM_START_0, R_CLASS2_SPILL_MEM_START_1, R_CLASS2_SPILL_MEM_SIZE, MAX_CLASS_2_SPILL * sizeof(u64)); priv->class_3_spill = xlr_config_spill(priv, R_CLASS3_SPILL_MEM_START_0, R_CLASS3_SPILL_MEM_START_1, R_CLASS3_SPILL_MEM_SIZE, MAX_CLASS_3_SPILL * sizeof(u64)); } /* * Configure PDE to Round-Robin distribution of packets to the * available cpu */ static void xlr_config_pde(struct xlr_net_priv *priv) { int i = 0; u64 bkt_map = 0; /* Each core has 8 buckets(station) */ for (i = 0; i < hweight32(priv->nd->cpu_mask); i++) bkt_map |= (0xff << (i * 8)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_0, (bkt_map & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_0 + 1, ((bkt_map >> 32) & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_1, (bkt_map & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_1 + 1, ((bkt_map >> 32) & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_2, (bkt_map & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_2 + 1, ((bkt_map >> 32) & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_3, (bkt_map & 0xffffffff)); xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_3 + 1, ((bkt_map >> 32) & 0xffffffff)); } /* * Setup the Message ring credits, bucket size and other * common configuration */ static int xlr_config_common(struct xlr_net_priv *priv) { struct xlr_fmn_info *gmac = priv->nd->gmac_fmn_info; int start_stn_id = gmac->start_stn_id; int end_stn_id = gmac->end_stn_id; int *bucket_size = priv->nd->bucket_size; int i, j, err; /* Setting non-core MsgBktSize(0x321 - 0x325) */ for (i = start_stn_id; i <= end_stn_id; i++) { xlr_nae_wreg(priv->base_addr, R_GMAC_RFR0_BUCKET_SIZE + i - start_stn_id, bucket_size[i]); } /* * Setting non-core Credit counter register * Distributing Gmac's credit to CPU's */ for (i = 0; i < 8; i++) { for (j = 0; j < 8; j++) xlr_nae_wreg(priv->base_addr, (R_CC_CPU0_0 + (i * 8)) + j, gmac->credit_config[(i * 8) + j]); } xlr_nae_wreg(priv->base_addr, R_MSG_TX_THRESHOLD, 3); xlr_nae_wreg(priv->base_addr, R_DMACR0, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_DMACR1, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_DMACR2, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_DMACR3, 0xffffffff); xlr_nae_wreg(priv->base_addr, R_FREEQCARVE, 0); err = xlr_net_fill_rx_ring(priv->ndev); if (err) return err; nlm_register_fmn_handler(start_stn_id, end_stn_id, xlr_net_fmn_handler, priv->adapter); return 0; } static void xlr_config_translate_table(struct xlr_net_priv *priv) { u32 cpu_mask; u32 val; int bkts[32]; /* one bucket is assumed for each cpu */ int b1, b2, c1, c2, i, j, k; int use_bkt; use_bkt = 0; cpu_mask = priv->nd->cpu_mask; pr_info("Using %s-based distribution\n", (use_bkt) ? "bucket" : "class"); j = 0; for (i = 0; i < 32; i++) { if ((1 << i) & cpu_mask) { /* for each cpu, mark the 4+threadid bucket */ bkts[j] = ((i / 4) * 8) + (i % 4); j++; } } /*configure the 128 * 9 Translation table to send to available buckets*/ k = 0; c1 = 3; c2 = 0; for (i = 0; i < 64; i++) { /* * On use_bkt set the b0, b1 are used, else * the 4 classes are used, here implemented * a logic to distribute the packets to the * buckets equally or based on the class */ c1 = (c1 + 1) & 3; c2 = (c1 + 1) & 3; b1 = bkts[k]; k = (k + 1) % j; b2 = bkts[k]; k = (k + 1) % j; val = ((c1 << 23) | (b1 << 17) | (use_bkt << 16) | (c2 << 7) | (b2 << 1) | (use_bkt << 0)); dev_dbg(&priv->ndev->dev, "Table[%d] b1=%d b2=%d c1=%d c2=%d\n", i, b1, b2, c1, c2); xlr_nae_wreg(priv->base_addr, R_TRANSLATETABLE + i, val); c1 = c2; } } static void xlr_config_parser(struct xlr_net_priv *priv) { u32 val; /* Mark it as ETHERNET type */ xlr_nae_wreg(priv->base_addr, R_L2TYPE_0, 0x01); /* Use 7bit CRChash for flow classification with 127 as CRC polynomial*/ xlr_nae_wreg(priv->base_addr, R_PARSERCONFIGREG, ((0x7f << 8) | (1 << 1))); /* configure the parser : L2 Type is configured in the bootloader */ /* extract IP: src, dest protocol */ xlr_nae_wreg(priv->base_addr, R_L3CTABLE, (9 << 20) | (1 << 19) | (1 << 18) | (0x01 << 16) | (0x0800 << 0)); xlr_nae_wreg(priv->base_addr, R_L3CTABLE + 1, (9 << 25) | (1 << 21) | (12 << 14) | (4 << 10) | (16 << 4) | 4); /* Configure to extract SRC port and Dest port for TCP and UDP pkts */ xlr_nae_wreg(priv->base_addr, R_L4CTABLE, 6); xlr_nae_wreg(priv->base_addr, R_L4CTABLE + 2, 17); val = ((0 << 21) | (2 << 17) | (2 << 11) | (2 << 7)); xlr_nae_wreg(priv->base_addr, R_L4CTABLE + 1, val); xlr_nae_wreg(priv->base_addr, R_L4CTABLE + 3, val); xlr_config_translate_table(priv); } static int xlr_phy_write(u32 *base_addr, int phy_addr, int regnum, u16 val) { unsigned long timeout, stoptime, checktime; int timedout; /* 100ms timeout*/ timeout = msecs_to_jiffies(100); stoptime = jiffies + timeout; timedout = 0; xlr_nae_wreg(base_addr, R_MII_MGMT_ADDRESS, (phy_addr << 8) | regnum); /* Write the data which starts the write cycle */ xlr_nae_wreg(base_addr, R_MII_MGMT_WRITE_DATA, (u32)val); /* poll for the read cycle to complete */ while (!timedout) { checktime = jiffies; if (xlr_nae_rdreg(base_addr, R_MII_MGMT_INDICATORS) == 0) break; timedout = time_after(checktime, stoptime); } if (timedout) { pr_info("Phy device write err: device busy"); return -EBUSY; } return 0; } static int xlr_phy_read(u32 *base_addr, int phy_addr, int regnum) { unsigned long timeout, stoptime, checktime; int timedout; /* 100ms timeout*/ timeout = msecs_to_jiffies(100); stoptime = jiffies + timeout; timedout = 0; /* setup the phy reg to be used */ xlr_nae_wreg(base_addr, R_MII_MGMT_ADDRESS, (phy_addr << 8) | (regnum << 0)); /* Issue the read command */ xlr_nae_wreg(base_addr, R_MII_MGMT_COMMAND, (1 << O_MII_MGMT_COMMAND__rstat)); /* poll for the read cycle to complete */ while (!timedout) { checktime = jiffies; if (xlr_nae_rdreg(base_addr, R_MII_MGMT_INDICATORS) == 0) break; timedout = time_after(checktime, stoptime); } if (timedout) { pr_info("Phy device read err: device busy"); return -EBUSY; } /* clear the read cycle */ xlr_nae_wreg(base_addr, R_MII_MGMT_COMMAND, 0); /* Read the data */ return xlr_nae_rdreg(base_addr, R_MII_MGMT_STATUS); } static int xlr_mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 val) { struct xlr_net_priv *priv = bus->priv; int ret; ret = xlr_phy_write(priv->mii_addr, phy_addr, regnum, val); dev_dbg(&priv->ndev->dev, "mii_write phy %d : %d <- %x [%x]\n", phy_addr, regnum, val, ret); return ret; } static int xlr_mii_read(struct mii_bus *bus, int phy_addr, int regnum) { struct xlr_net_priv *priv = bus->priv; int ret; ret = xlr_phy_read(priv->mii_addr, phy_addr, regnum); dev_dbg(&priv->ndev->dev, "mii_read phy %d : %d [%x]\n", phy_addr, regnum, ret); return ret; } /* * XLR ports are RGMII. XLS ports are SGMII mostly except the port0, * which can be configured either SGMII or RGMII, considered SGMII * by default, if board setup to RGMII the port_type need to set * accordingly.Serdes and PCS layer need to configured for SGMII */ static void xlr_sgmii_init(struct xlr_net_priv *priv) { int phy; xlr_phy_write(priv->serdes_addr, 26, 0, 0x6DB0); xlr_phy_write(priv->serdes_addr, 26, 1, 0xFFFF); xlr_phy_write(priv->serdes_addr, 26, 2, 0xB6D0); xlr_phy_write(priv->serdes_addr, 26, 3, 0x00FF); xlr_phy_write(priv->serdes_addr, 26, 4, 0x0000); xlr_phy_write(priv->serdes_addr, 26, 5, 0x0000); xlr_phy_write(priv->serdes_addr, 26, 6, 0x0005); xlr_phy_write(priv->serdes_addr, 26, 7, 0x0001); xlr_phy_write(priv->serdes_addr, 26, 8, 0x0000); xlr_phy_write(priv->serdes_addr, 26, 9, 0x0000); xlr_phy_write(priv->serdes_addr, 26, 10, 0x0000); /* program GPIO values for serdes init parameters */ xlr_nae_wreg(priv->gpio_addr, 0x20, 0x7e6802); xlr_nae_wreg(priv->gpio_addr, 0x10, 0x7104); xlr_nae_wreg(priv->gpio_addr, 0x22, 0x7e6802); xlr_nae_wreg(priv->gpio_addr, 0x21, 0x7104); /* enable autoneg - more magic */ phy = priv->phy_addr % 4 + 27; xlr_phy_write(priv->pcs_addr, phy, 0, 0x1000); xlr_phy_write(priv->pcs_addr, phy, 0, 0x0200); } void xlr_set_gmac_speed(struct xlr_net_priv *priv) { struct phy_device *phydev = xlr_get_phydev(priv); int speed; if (phydev->interface == PHY_INTERFACE_MODE_SGMII) xlr_sgmii_init(priv); if (phydev->speed != priv->phy_speed) { speed = phydev->speed; if (speed == SPEED_1000) { /* Set interface to Byte mode */ xlr_nae_wreg(priv->base_addr, R_MAC_CONFIG_2, 0x7217); priv->phy_speed = speed; } else if (speed == SPEED_100 || speed == SPEED_10) { /* Set interface to Nibble mode */ xlr_nae_wreg(priv->base_addr, R_MAC_CONFIG_2, 0x7117); priv->phy_speed = speed; } /* Set SGMII speed in Interface control reg */ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { if (speed == SPEED_10) xlr_nae_wreg(priv->base_addr, R_INTERFACE_CONTROL, SGMII_SPEED_10); if (speed == SPEED_100) xlr_nae_wreg(priv->base_addr, R_INTERFACE_CONTROL, SGMII_SPEED_100); if (speed == SPEED_1000) xlr_nae_wreg(priv->base_addr, R_INTERFACE_CONTROL, SGMII_SPEED_1000); } if (speed == SPEED_10) xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x2); if (speed == SPEED_100) xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x1); if (speed == SPEED_1000) xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x0); } pr_info("gmac%d : %dMbps\n", priv->port_id, priv->phy_speed); } static void xlr_gmac_link_adjust(struct net_device *ndev) { struct xlr_net_priv *priv = netdev_priv(ndev); struct phy_device *phydev = xlr_get_phydev(priv); u32 intreg; intreg = xlr_nae_rdreg(priv->base_addr, R_INTREG); if (phydev->link) { if (phydev->speed != priv->phy_speed) { xlr_set_gmac_speed(priv); pr_info("gmac%d : Link up\n", priv->port_id); } } else { xlr_set_gmac_speed(priv); pr_info("gmac%d : Link down\n", priv->port_id); } } static int xlr_mii_probe(struct xlr_net_priv *priv) { struct phy_device *phydev = xlr_get_phydev(priv); if (!phydev) { pr_err("no PHY found on phy_addr %d\n", priv->phy_addr); return -ENODEV; } /* Attach MAC to PHY */ phydev = phy_connect(priv->ndev, phydev_name(phydev), xlr_gmac_link_adjust, priv->nd->phy_interface); if (IS_ERR(phydev)) { pr_err("could not attach PHY\n"); return PTR_ERR(phydev); } phydev->supported &= (ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half | ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg | ADVERTISED_MII); phydev->advertising = phydev->supported; phy_attached_info(phydev); return 0; } static int xlr_setup_mdio(struct xlr_net_priv *priv, struct platform_device *pdev) { int err; priv->mii_bus = mdiobus_alloc(); if (!priv->mii_bus) { pr_err("mdiobus alloc failed\n"); return -ENOMEM; } priv->mii_bus->priv = priv; priv->mii_bus->name = "xlr-mdio"; snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d", priv->mii_bus->name, priv->port_id); priv->mii_bus->read = xlr_mii_read; priv->mii_bus->write = xlr_mii_write; priv->mii_bus->parent = &pdev->dev; /* Scan only the enabled address */ priv->mii_bus->phy_mask = ~(1 << priv->phy_addr); /* setting clock divisor to 54 */ xlr_nae_wreg(priv->base_addr, R_MII_MGMT_CONFIG, 0x7); err = mdiobus_register(priv->mii_bus); if (err) { mdiobus_free(priv->mii_bus); pr_err("mdio bus registration failed\n"); return err; } pr_info("Registered mdio bus id : %s\n", priv->mii_bus->id); err = xlr_mii_probe(priv); if (err) { mdiobus_free(priv->mii_bus); return err; } return 0; } static void xlr_port_enable(struct xlr_net_priv *priv) { u32 prid = (read_c0_prid() & 0xf000); /* Setup MAC_CONFIG reg if (xls & rgmii) */ if ((prid == 0x8000 || prid == 0x4000 || prid == 0xc000) && priv->nd->phy_interface == PHY_INTERFACE_MODE_RGMII) xlr_reg_update(priv->base_addr, R_RX_CONTROL, (1 << O_RX_CONTROL__RGMII), (1 << O_RX_CONTROL__RGMII)); /* Rx Tx enable */ xlr_reg_update(priv->base_addr, R_MAC_CONFIG_1, ((1 << O_MAC_CONFIG_1__rxen) | (1 << O_MAC_CONFIG_1__txen) | (1 << O_MAC_CONFIG_1__rxfc) | (1 << O_MAC_CONFIG_1__txfc)), ((1 << O_MAC_CONFIG_1__rxen) | (1 << O_MAC_CONFIG_1__txen) | (1 << O_MAC_CONFIG_1__rxfc) | (1 << O_MAC_CONFIG_1__txfc))); /* Setup tx control reg */ xlr_reg_update(priv->base_addr, R_TX_CONTROL, ((1 << O_TX_CONTROL__TXENABLE) | (512 << O_TX_CONTROL__TXTHRESHOLD)), 0x3fff); /* Setup rx control reg */ xlr_reg_update(priv->base_addr, R_RX_CONTROL, 1 << O_RX_CONTROL__RXENABLE, 1 << O_RX_CONTROL__RXENABLE); } static void xlr_port_disable(struct xlr_net_priv *priv) { /* Setup MAC_CONFIG reg */ /* Rx Tx disable*/ xlr_reg_update(priv->base_addr, R_MAC_CONFIG_1, ((1 << O_MAC_CONFIG_1__rxen) | (1 << O_MAC_CONFIG_1__txen) | (1 << O_MAC_CONFIG_1__rxfc) | (1 << O_MAC_CONFIG_1__txfc)), 0x0); /* Setup tx control reg */ xlr_reg_update(priv->base_addr, R_TX_CONTROL, ((1 << O_TX_CONTROL__TXENABLE) | (512 << O_TX_CONTROL__TXTHRESHOLD)), 0); /* Setup rx control reg */ xlr_reg_update(priv->base_addr, R_RX_CONTROL, 1 << O_RX_CONTROL__RXENABLE, 0); } /* * Initialization of gmac */ static int xlr_gmac_init(struct xlr_net_priv *priv, struct platform_device *pdev) { int ret; pr_info("Initializing the gmac%d\n", priv->port_id); xlr_port_disable(priv); xlr_nae_wreg(priv->base_addr, R_DESC_PACK_CTRL, (1 << O_DESC_PACK_CTRL__MAXENTRY) | (BYTE_OFFSET << O_DESC_PACK_CTRL__BYTEOFFSET) | (1600 << O_DESC_PACK_CTRL__REGULARSIZE)); ret = xlr_setup_mdio(priv, pdev); if (ret) return ret; xlr_port_enable(priv); /* Enable Full-duplex/1000Mbps/CRC */ xlr_nae_wreg(priv->base_addr, R_MAC_CONFIG_2, 0x7217); /* speed 2.5Mhz */ xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x02); /* Setup Interrupt mask reg */ xlr_nae_wreg(priv->base_addr, R_INTMASK, (1 << O_INTMASK__TXILLEGAL) | (1 << O_INTMASK__MDINT) | (1 << O_INTMASK__TXFETCHERROR) | (1 << O_INTMASK__P2PSPILLECC) | (1 << O_INTMASK__TAGFULL) | (1 << O_INTMASK__UNDERRUN) | (1 << O_INTMASK__ABORT)); /* Clear all stats */ xlr_reg_update(priv->base_addr, R_STATCTRL, 0, 1 << O_STATCTRL__CLRCNT); xlr_reg_update(priv->base_addr, R_STATCTRL, 1 << 2, 1 << 2); return 0; } static int xlr_net_probe(struct platform_device *pdev) { struct xlr_net_priv *priv = NULL; struct net_device *ndev; struct resource *res; struct xlr_adapter *adapter; int err, port; pr_info("XLR/XLS Ethernet Driver controller %d\n", pdev->id); /* * Allocate our adapter data structure and attach it to the device. */ adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL); if (!adapter) return -ENOMEM; /* * XLR and XLS have 1 and 2 NAE controller respectively * Each controller has 4 gmac ports, mapping each controller * under one parent device, 4 gmac ports under one device. */ for (port = 0; port < pdev->num_resources / 2; port++) { ndev = alloc_etherdev_mq(sizeof(struct xlr_net_priv), 32); if (!ndev) { dev_err(&pdev->dev, "Allocation of Ethernet device failed\n"); return -ENOMEM; } priv = netdev_priv(ndev); priv->pdev = pdev; priv->ndev = ndev; priv->port_id = (pdev->id * 4) + port; priv->nd = (struct xlr_net_data *)pdev->dev.platform_data; res = platform_get_resource(pdev, IORESOURCE_MEM, port); priv->base_addr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->base_addr)) { err = PTR_ERR(priv->base_addr); goto err_gmac; } priv->adapter = adapter; adapter->netdev[port] = ndev; res = platform_get_resource(pdev, IORESOURCE_IRQ, port); if (!res) { dev_err(&pdev->dev, "No irq resource for MAC %d\n", priv->port_id); err = -ENODEV; goto err_gmac; } ndev->irq = res->start; priv->phy_addr = priv->nd->phy_addr[port]; priv->tx_stnid = priv->nd->tx_stnid[port]; priv->mii_addr = priv->nd->mii_addr; priv->serdes_addr = priv->nd->serdes_addr; priv->pcs_addr = priv->nd->pcs_addr; priv->gpio_addr = priv->nd->gpio_addr; ndev->netdev_ops = &xlr_netdev_ops; ndev->watchdog_timeo = HZ; /* Setup Mac address and Rx mode */ eth_hw_addr_random(ndev); xlr_hw_set_mac_addr(ndev); xlr_set_rx_mode(ndev); priv->num_rx_desc += MAX_NUM_DESC_SPILL; ndev->ethtool_ops = &xlr_ethtool_ops; SET_NETDEV_DEV(ndev, &pdev->dev); xlr_config_fifo_spill_area(priv); /* Configure PDE to Round-Robin pkt distribution */ xlr_config_pde(priv); xlr_config_parser(priv); /* Call init with respect to port */ if (strcmp(res->name, "gmac") == 0) { err = xlr_gmac_init(priv, pdev); if (err) { dev_err(&pdev->dev, "gmac%d init failed\n", priv->port_id); goto err_gmac; } } if (priv->port_id == 0 || priv->port_id == 4) { err = xlr_config_common(priv); if (err) goto err_netdev; } err = register_netdev(ndev); if (err) { dev_err(&pdev->dev, "Registering netdev failed for gmac%d\n", priv->port_id); goto err_netdev; } platform_set_drvdata(pdev, priv); } return 0; err_netdev: mdiobus_free(priv->mii_bus); err_gmac: free_netdev(ndev); return err; } static int xlr_net_remove(struct platform_device *pdev) { struct xlr_net_priv *priv = platform_get_drvdata(pdev); unregister_netdev(priv->ndev); mdiobus_unregister(priv->mii_bus); mdiobus_free(priv->mii_bus); free_netdev(priv->ndev); return 0; } static struct platform_driver xlr_net_driver = { .probe = xlr_net_probe, .remove = xlr_net_remove, .driver = { .name = "xlr-net", }, }; module_platform_driver(xlr_net_driver); MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>"); MODULE_DESCRIPTION("Ethernet driver for Netlogic XLR/XLS"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_ALIAS("platform:xlr-net");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1