Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hans de Goede | 2452 | 99.51% | 1 | 25.00% |
Arnd Bergmann | 9 | 0.37% | 1 | 25.00% |
Nathan Chancellor | 2 | 0.08% | 1 | 25.00% |
Yangtao Li | 1 | 0.04% | 1 | 25.00% |
Total | 2464 | 4 |
/* SPDX-License-Identifier: GPL-2.0 */ /****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * ******************************************************************************/ #ifndef __RTW_CMD_H_ #define __RTW_CMD_H_ #include <linux/completion.h> #define C2H_MEM_SZ (16*1024) #define FREE_CMDOBJ_SZ 128 #define MAX_CMDSZ 1024 #define MAX_RSPSZ 512 #define MAX_EVTSZ 1024 #define CMDBUFF_ALIGN_SZ 512 struct cmd_obj { struct adapter *padapter; u16 cmdcode; u8 res; u8 *parmbuf; u32 cmdsz; u8 *rsp; u32 rspsz; struct submit_ctx *sctx; struct list_head list; }; /* cmd flags */ enum { RTW_CMDF_DIRECTLY = BIT0, RTW_CMDF_WAIT_ACK = BIT1, }; struct cmd_priv { struct completion cmd_queue_comp; struct completion terminate_cmdthread_comp; struct __queue cmd_queue; u8 cmd_seq; u8 *cmd_buf; /* shall be non-paged, and 4 bytes aligned */ u8 *cmd_allocated_buf; u8 *rsp_buf; /* shall be non-paged, and 4 bytes aligned */ u8 *rsp_allocated_buf; u32 cmd_issued_cnt; u32 cmd_done_cnt; u32 rsp_cnt; atomic_t cmdthd_running; /* u8 cmdthd_running; */ u8 stop_req; struct adapter *padapter; _mutex sctx_mutex; }; struct evt_priv { _workitem c2h_wk; bool c2h_wk_alive; struct rtw_cbuf *c2h_queue; #define C2H_QUEUE_MAX_LEN 10 atomic_t event_seq; u8 *evt_buf; /* shall be non-paged, and 4 bytes aligned */ u8 *evt_allocated_buf; u32 evt_done_cnt; u8 *c2h_mem; u8 *allocated_c2h_mem; }; #define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \ do {\ INIT_LIST_HEAD(&pcmd->list);\ pcmd->cmdcode = code;\ pcmd->parmbuf = (u8 *)(pparm);\ pcmd->cmdsz = sizeof (*pparm);\ pcmd->rsp = NULL;\ pcmd->rspsz = 0;\ } while (0) #define init_h2fwcmd_w_parm_no_parm_rsp(pcmd, code) \ do {\ INIT_LIST_HEAD(&pcmd->list);\ pcmd->cmdcode = code;\ pcmd->parmbuf = NULL;\ pcmd->cmdsz = 0;\ pcmd->rsp = NULL;\ pcmd->rspsz = 0;\ } while (0) struct c2h_evt_hdr { u8 id:4; u8 plen:4; u8 seq; u8 payload[0]; }; struct c2h_evt_hdr_88xx { u8 id; u8 seq; u8 payload[12]; u8 plen; u8 trigger; }; #define c2h_evt_valid(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen) struct P2P_PS_Offload_t { u8 Offload_En:1; u8 role:1; /* 1: Owner, 0: Client */ u8 CTWindow_En:1; u8 NoA0_En:1; u8 NoA1_En:1; u8 AllStaSleep:1; /* Only valid in Owner */ u8 discovery:1; u8 rsvd:1; }; struct P2P_PS_CTWPeriod_t { u8 CTWPeriod; /* TU */ }; extern u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); extern struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv); extern void rtw_free_cmd_obj(struct cmd_obj *pcmd); void rtw_stop_cmd_thread(struct adapter *adapter); int rtw_cmd_thread(void *context); extern u32 rtw_init_cmd_priv (struct cmd_priv *pcmdpriv); extern void rtw_free_cmd_priv (struct cmd_priv *pcmdpriv); extern u32 rtw_init_evt_priv (struct evt_priv *pevtpriv); extern void rtw_free_evt_priv (struct evt_priv *pevtpriv); extern void rtw_evt_notify_isr(struct evt_priv *pevtpriv); enum rtw_drvextra_cmd_id { NONE_WK_CID, DYNAMIC_CHK_WK_CID, DM_CTRL_WK_CID, PBC_POLLING_WK_CID, POWER_SAVING_CTRL_WK_CID,/* IPS, AUTOSuspend */ LPS_CTRL_WK_CID, ANT_SELECT_WK_CID, P2P_PS_WK_CID, P2P_PROTO_WK_CID, CHECK_HIQ_WK_CID,/* for softap mode, check hi queue if empty */ INTEl_WIDI_WK_CID, C2H_WK_CID, RTP_TIMER_CFG_WK_CID, RESET_SECURITYPRIV, /* add for CONFIG_IEEE80211W, none 11w also can use */ FREE_ASSOC_RESOURCES, /* add for CONFIG_IEEE80211W, none 11w also can use */ DM_IN_LPS_WK_CID, DM_RA_MSK_WK_CID, /* add for STA update RAMask when bandwith change. */ BEAMFORMING_WK_CID, LPS_CHANGE_DTIM_CID, BTINFO_WK_CID, MAX_WK_CID }; enum LPS_CTRL_TYPE { LPS_CTRL_SCAN = 0, LPS_CTRL_JOINBSS = 1, LPS_CTRL_CONNECT =2, LPS_CTRL_DISCONNECT =3, LPS_CTRL_SPECIAL_PACKET =4, LPS_CTRL_LEAVE =5, LPS_CTRL_TRAFFIC_BUSY = 6, }; enum RFINTFS { SWSI, HWSI, HWPI, }; /* Caller Mode: Infra, Ad-HoC(C) Notes: To enter USB suspend mode Command Mode */ struct usb_suspend_parm { u32 action;/* 1: sleep, 0:resume */ }; /* Caller Mode: Infra, Ad-HoC Notes: To join a known BSS. Command-Event Mode */ /* Caller Mode: Infra, Ad-Hoc Notes: To join the specified bss Command Event Mode */ struct joinbss_parm { struct wlan_bssid_ex network; }; /* Caller Mode: Infra, Ad-HoC(C) Notes: To disconnect the current associated BSS Command Mode */ struct disconnect_parm { u32 deauth_timeout_ms; }; /* Caller Mode: AP, Ad-HoC(M) Notes: To create a BSS Command Mode */ struct createbss_parm { struct wlan_bssid_ex network; }; /* Caller Mode: AP, Ad-HoC, Infra Notes: To set the NIC mode of RTL8711 Command Mode The definition of mode: #define IW_MODE_AUTO 0 Let the driver decides which AP to join #define IW_MODE_ADHOC 1 Single cell network (Ad-Hoc Clients) #define IW_MODE_INFRA 2 Multi cell network, roaming, .. #define IW_MODE_MASTER 3 Synchronisation master or Access Point #define IW_MODE_REPEAT 4 Wireless Repeater (forwarder) #define IW_MODE_SECOND 5 Secondary master/repeater (backup) #define IW_MODE_MONITOR 6 Passive monitor (listen only) */ struct setopmode_parm { u8 mode; u8 rsvd[3]; }; /* Caller Mode: AP, Ad-HoC, Infra Notes: To ask RTL8711 performing site-survey Command-Event Mode */ #define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */ #define RTW_CHANNEL_SCAN_AMOUNT (14+37) struct sitesurvey_parm { sint scan_mode; /* active: 1, passive: 0 */ u8 ssid_num; u8 ch_num; struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT]; struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT]; }; /* Caller Mode: Any Notes: To set the auth type of RTL8711. open/shared/802.1x Command Mode */ struct setauth_parm { u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */ u8 _1x; /* 0: PSK, 1: TLS */ u8 rsvd[2]; }; /* Caller Mode: Infra a. algorithm: wep40, wep104, tkip & aes b. keytype: grp key/unicast key c. key contents when shared key ==> keyid is the camid when 802.1x ==> keyid [0:1] ==> grp key when 802.1x ==> keyid > 2 ==> unicast key */ struct setkey_parm { u8 algorithm; /* encryption algorithm, could be none, wep40, TKIP, CCMP, wep104 */ u8 keyid; u8 grpkey; /* 1: this is the grpkey for 802.1x. 0: this is the unicast key for 802.1x */ u8 set_tx; /* 1: main tx key for wep. 0: other key. */ u8 key[16]; /* this could be 40 or 104 */ }; /* When in AP or Ad-Hoc mode, this is used to allocate an sw/hw entry for a newly associated sta. Command when shared key ==> algorithm/keyid */ struct set_stakey_parm { u8 addr[ETH_ALEN]; u8 algorithm; u8 keyid; u8 key[16]; }; struct set_stakey_rsp { u8 addr[ETH_ALEN]; u8 keyid; u8 rsvd; }; /* Caller Ad-Hoc/AP Command -Rsp(AID == CAMID) mode This is to force fw to add an sta_data entry per driver's request. FW will write an cam entry associated with it. */ struct set_assocsta_parm { u8 addr[ETH_ALEN]; }; struct set_assocsta_rsp { u8 cam_id; u8 rsvd[3]; }; /* Caller Ad-Hoc/AP Command mode This is to force fw to del an sta_data entry per driver's request FW will invalidate the cam entry associated with it. */ struct del_assocsta_parm { u8 addr[ETH_ALEN]; }; /* Caller Mode: AP/Ad-HoC(M) Notes: To notify fw that given staid has changed its power state Command Mode */ struct setstapwrstate_parm { u8 staid; u8 status; u8 hwaddr[6]; }; /* Caller Mode: Any Notes: To setup the basic rate of RTL8711 Command Mode */ struct setbasicrate_parm { u8 basicrates[NumRates]; }; /* Caller Mode: Any Notes: To read the current basic rate Command-Rsp Mode */ struct getbasicrate_parm { u32 rsvd; }; struct getbasicrate_rsp { u8 basicrates[NumRates]; }; /* Caller Mode: Any Notes: To setup the data rate of RTL8711 Command Mode */ struct setdatarate_parm { u8 mac_id; u8 datarates[NumRates]; }; /* Caller Mode: Any Notes: To read the current data rate Command-Rsp Mode */ struct getdatarate_parm { u32 rsvd; }; struct getdatarate_rsp { u8 datarates[NumRates]; }; /* Caller Mode: Any AP: AP can use the info for the contents of beacon frame Infra: STA can use the info when sitesurveying Ad-HoC(M): Like AP Ad-HoC(C): Like STA Notes: To set the phy capability of the NIC Command Mode */ struct setphyinfo_parm { struct regulatory_class class_sets[NUM_REGULATORYS]; u8 status; }; struct getphyinfo_parm { u32 rsvd; }; struct getphyinfo_rsp { struct regulatory_class class_sets[NUM_REGULATORYS]; u8 status; }; /* Caller Mode: Any Notes: To set the channel/modem/band This command will be used when channel/modem/band is changed. Command Mode */ struct setphy_parm { u8 rfchannel; u8 modem; }; /* Caller Mode: Any Notes: To get the current setting of channel/modem/band Command-Rsp Mode */ struct getphy_parm { u32 rsvd; }; struct getphy_rsp { u8 rfchannel; u8 modem; }; struct readBB_parm { u8 offset; }; struct readBB_rsp { u8 value; }; struct readTSSI_parm { u8 offset; }; struct readTSSI_rsp { u8 value; }; struct writeBB_parm { u8 offset; u8 value; }; struct readRF_parm { u8 offset; }; struct readRF_rsp { u32 value; }; struct writeRF_parm { u32 offset; u32 value; }; struct getrfintfs_parm { u8 rfintfs; }; struct Tx_Beacon_param { struct wlan_bssid_ex network; }; /* Notes: This command is used for H2C/C2H loopback testing mac[0] == 0 ==> CMD mode, return H2C_SUCCESS. The following condition must be true under CMD mode mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; s2 == (b1 << 8 | b0); mac[0] == 1 ==> CMD_RSP mode, return H2C_SUCCESS_RSP The rsp layout shall be: rsp: parm: mac[0] = mac[5]; mac[1] = mac[4]; mac[2] = mac[3]; mac[3] = mac[2]; mac[4] = mac[1]; mac[5] = mac[0]; s0 = s1; s1 = swap16(s0); w0 = swap32(w1); b0 = b1 s2 = s0 + s1 b1 = b0 w1 = w0 mac[0] == 2 ==> CMD_EVENT mode, return H2C_SUCCESS The event layout shall be: event: parm: mac[0] = mac[5]; mac[1] = mac[4]; mac[2] = event's sequence number, starting from 1 to parm's marc[3] mac[3] = mac[2]; mac[4] = mac[1]; mac[5] = mac[0]; s0 = swap16(s0) - event.mac[2]; s1 = s1 + event.mac[2]; w0 = swap32(w0); b0 = b1 s2 = s0 + event.mac[2] b1 = b0 w1 = swap32(w1) - event.mac[2]; parm->mac[3] is the total event counts that host requested. event will be the same with the cmd's param. */ /* CMD param Formart for driver extra cmd handler */ struct drvextra_cmd_parm { int ec_id; /* extra cmd id */ int type; /* Can use this field as the type id or command size */ int size; /* buffer size */ unsigned char *pbuf; }; /*------------------- Below are used for RF/BB tunning ---------------------*/ struct setantenna_parm { u8 tx_antset; u8 rx_antset; u8 tx_antenna; u8 rx_antenna; }; struct enrateadaptive_parm { u32 en; }; struct settxagctbl_parm { u32 txagc[MAX_RATES_LENGTH]; }; struct gettxagctbl_parm { u32 rsvd; }; struct gettxagctbl_rsp { u32 txagc[MAX_RATES_LENGTH]; }; struct setagcctrl_parm { u32 agcctrl; /* 0: pure hw, 1: fw */ }; struct setssup_parm { u32 ss_ForceUp[MAX_RATES_LENGTH]; }; struct getssup_parm { u32 rsvd; }; struct getssup_rsp { u8 ss_ForceUp[MAX_RATES_LENGTH]; }; struct setssdlevel_parm { u8 ss_DLevel[MAX_RATES_LENGTH]; }; struct getssdlevel_parm { u32 rsvd; }; struct getssdlevel_rsp { u8 ss_DLevel[MAX_RATES_LENGTH]; }; struct setssulevel_parm { u8 ss_ULevel[MAX_RATES_LENGTH]; }; struct getssulevel_parm { u32 rsvd; }; struct getssulevel_rsp { u8 ss_ULevel[MAX_RATES_LENGTH]; }; struct setcountjudge_parm { u8 count_judge[MAX_RATES_LENGTH]; }; struct getcountjudge_parm { u32 rsvd; }; struct getcountjudge_rsp { u8 count_judge[MAX_RATES_LENGTH]; }; struct setratable_parm { u8 ss_ForceUp[NumRates]; u8 ss_ULevel[NumRates]; u8 ss_DLevel[NumRates]; u8 count_judge[NumRates]; }; struct getratable_parm { uint rsvd; }; struct getratable_rsp { u8 ss_ForceUp[NumRates]; u8 ss_ULevel[NumRates]; u8 ss_DLevel[NumRates]; u8 count_judge[NumRates]; }; /* to get TX, RX retry count */ struct gettxretrycnt_parm{ unsigned int rsvd; }; struct gettxretrycnt_rsp{ unsigned long tx_retrycnt; }; struct getrxretrycnt_parm{ unsigned int rsvd; }; struct getrxretrycnt_rsp{ unsigned long rx_retrycnt; }; /* to get BCNOK, BCNERR count */ struct getbcnokcnt_parm{ unsigned int rsvd; }; struct getbcnokcnt_rsp{ unsigned long bcnokcnt; }; struct getbcnerrcnt_parm{ unsigned int rsvd; }; struct getbcnerrcnt_rsp{ unsigned long bcnerrcnt; }; /* to get current TX power level */ struct getcurtxpwrlevel_parm{ unsigned int rsvd; }; struct getcurtxpwrlevel_rsp{ unsigned short tx_power; }; struct setprobereqextraie_parm { unsigned char e_id; unsigned char ie_len; unsigned char ie[0]; }; struct setassocreqextraie_parm { unsigned char e_id; unsigned char ie_len; unsigned char ie[0]; }; struct setproberspextraie_parm { unsigned char e_id; unsigned char ie_len; unsigned char ie[0]; }; struct setassocrspextraie_parm { unsigned char e_id; unsigned char ie_len; unsigned char ie[0]; }; struct addBaReq_parm { unsigned int tid; u8 addr[ETH_ALEN]; }; /*H2C Handler index: 46 */ struct set_ch_parm { u8 ch; u8 bw; u8 ch_offset; }; /*H2C Handler index: 59 */ struct SetChannelPlan_param { u8 channel_plan; }; /*H2C Handler index: 60 */ struct LedBlink_param { void *pLed; }; /*H2C Handler index: 61 */ struct SetChannelSwitch_param { u8 new_ch_no; }; /*H2C Handler index: 62 */ struct TDLSoption_param { u8 addr[ETH_ALEN]; u8 option; }; /*H2C Handler index: 64 */ struct RunInThread_param { void (*func)(void*); void *context; }; #define GEN_CMD_CODE(cmd) cmd ## _CMD_ /* Result: 0x00: success 0x01: sucess, and check Response. 0x02: cmd ignored due to duplicated sequcne number 0x03: cmd dropped due to invalid cmd code 0x04: reserved. */ #define H2C_RSP_OFFSET 512 #define H2C_SUCCESS 0x00 #define H2C_SUCCESS_RSP 0x01 #define H2C_DUPLICATED 0x02 #define H2C_DROPPED 0x03 #define H2C_PARAMETERS_ERROR 0x04 #define H2C_REJECTED 0x05 #define H2C_CMD_OVERFLOW 0x06 #define H2C_RESERVED 0x07 u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid, int ssid_num, struct rtw_ieee80211_channel *ch, int ch_num); extern u8 rtw_createbss_cmd(struct adapter *padapter); u8 rtw_startbss_cmd(struct adapter *padapter, int flags); struct sta_info; extern u8 rtw_setstakey_cmd(struct adapter *padapter, struct sta_info *sta, u8 unicast_key, bool enqueue); extern u8 rtw_clearstakey_cmd(struct adapter *padapter, struct sta_info *sta, u8 enqueue); extern u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network* pnetwork); u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, bool enqueue); extern u8 rtw_setopmode_cmd(struct adapter *padapter, enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype, bool enqueue); extern u8 rtw_setdatarate_cmd(struct adapter *padapter, u8 *rateset); extern u8 rtw_setrfintfs_cmd(struct adapter *padapter, u8 mode); extern u8 rtw_gettssi_cmd(struct adapter *padapter, u8 offset, u8 *pval); extern u8 rtw_setfwdig_cmd(struct adapter *padapter, u8 type); extern u8 rtw_setfwra_cmd(struct adapter *padapter, u8 type); extern u8 rtw_addbareq_cmd(struct adapter *padapter, u8 tid, u8 *addr); /* add for CONFIG_IEEE80211W, none 11w also can use */ extern u8 rtw_reset_securitypriv_cmd(struct adapter *padapter); extern u8 rtw_free_assoc_resources_cmd(struct adapter *padapter); extern u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter); u8 rtw_lps_ctrl_wk_cmd(struct adapter *padapter, u8 lps_ctrl_type, u8 enqueue); u8 rtw_dm_in_lps_wk_cmd(struct adapter *padapter); u8 rtw_dm_ra_mask_wk_cmd(struct adapter *padapter, u8 *psta); extern u8 rtw_ps_cmd(struct adapter *padapter); u8 rtw_chk_hi_queue_cmd(struct adapter *padapter); extern u8 rtw_set_chplan_cmd(struct adapter *padapter, u8 chplan, u8 enqueue, u8 swconfig); extern u8 rtw_c2h_packet_wk_cmd(struct adapter *padapter, u8 *pbuf, u16 length); extern u8 rtw_c2h_wk_cmd(struct adapter *padapter, u8 *c2h_evt); u8 rtw_drvextra_cmd_hdl(struct adapter *padapter, unsigned char *pbuf); extern void rtw_survey_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_disassoc_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_joinbss_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_createbss_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_getbbrfreg_cmdrsp_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_setstaKey_cmdrsp_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_setassocsta_cmdrsp_callback(struct adapter *padapter, struct cmd_obj *pcmd); extern void rtw_getrttbl_cmdrsp_callback(struct adapter *padapter, struct cmd_obj *pcmd); struct _cmd_callback { u32 cmd_code; void (*callback)(struct adapter *padapter, struct cmd_obj *cmd); }; enum rtw_h2c_cmd { GEN_CMD_CODE(_Read_MACREG) , /*0*/ GEN_CMD_CODE(_Write_MACREG) , GEN_CMD_CODE(_Read_BBREG) , GEN_CMD_CODE(_Write_BBREG) , GEN_CMD_CODE(_Read_RFREG) , GEN_CMD_CODE(_Write_RFREG) , /*5*/ GEN_CMD_CODE(_Read_EEPROM) , GEN_CMD_CODE(_Write_EEPROM) , GEN_CMD_CODE(_Read_EFUSE) , GEN_CMD_CODE(_Write_EFUSE) , GEN_CMD_CODE(_Read_CAM) , /*10*/ GEN_CMD_CODE(_Write_CAM) , GEN_CMD_CODE(_setBCNITV), GEN_CMD_CODE(_setMBIDCFG), GEN_CMD_CODE(_JoinBss), /*14*/ GEN_CMD_CODE(_DisConnect) , /*15*/ GEN_CMD_CODE(_CreateBss) , GEN_CMD_CODE(_SetOpMode) , GEN_CMD_CODE(_SiteSurvey), /*18*/ GEN_CMD_CODE(_SetAuth) , GEN_CMD_CODE(_SetKey) , /*20*/ GEN_CMD_CODE(_SetStaKey) , GEN_CMD_CODE(_SetAssocSta) , GEN_CMD_CODE(_DelAssocSta) , GEN_CMD_CODE(_SetStaPwrState) , GEN_CMD_CODE(_SetBasicRate) , /*25*/ GEN_CMD_CODE(_GetBasicRate) , GEN_CMD_CODE(_SetDataRate) , GEN_CMD_CODE(_GetDataRate) , GEN_CMD_CODE(_SetPhyInfo) , GEN_CMD_CODE(_GetPhyInfo) , /*30*/ GEN_CMD_CODE(_SetPhy) , GEN_CMD_CODE(_GetPhy) , GEN_CMD_CODE(_readRssi) , GEN_CMD_CODE(_readGain) , GEN_CMD_CODE(_SetAtim) , /*35*/ GEN_CMD_CODE(_SetPwrMode) , GEN_CMD_CODE(_JoinbssRpt), GEN_CMD_CODE(_SetRaTable) , GEN_CMD_CODE(_GetRaTable) , GEN_CMD_CODE(_GetCCXReport), /*40*/ GEN_CMD_CODE(_GetDTMReport), GEN_CMD_CODE(_GetTXRateStatistics), GEN_CMD_CODE(_SetUsbSuspend), GEN_CMD_CODE(_SetH2cLbk), GEN_CMD_CODE(_AddBAReq) , /*45*/ GEN_CMD_CODE(_SetChannel), /*46*/ GEN_CMD_CODE(_SetTxPower), GEN_CMD_CODE(_SwitchAntenna), GEN_CMD_CODE(_SetCrystalCap), GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/ GEN_CMD_CODE(_SetSingleToneTx),/*51*/ GEN_CMD_CODE(_SetCarrierSuppressionTx), GEN_CMD_CODE(_SetContinuousTx), GEN_CMD_CODE(_SwitchBandwidth), /*54*/ GEN_CMD_CODE(_TX_Beacon), /*55*/ GEN_CMD_CODE(_Set_MLME_EVT), /*56*/ GEN_CMD_CODE(_Set_Drv_Extra), /*57*/ GEN_CMD_CODE(_Set_H2C_MSG), /*58*/ GEN_CMD_CODE(_SetChannelPlan), /*59*/ GEN_CMD_CODE(_LedBlink), /*60*/ GEN_CMD_CODE(_SetChannelSwitch), /*61*/ GEN_CMD_CODE(_TDLS), /*62*/ GEN_CMD_CODE(_ChkBMCSleepq), /*63*/ GEN_CMD_CODE(_RunInThreadCMD), /*64*/ MAX_H2CCMD }; #define _GetBBReg_CMD_ _Read_BBREG_CMD_ #define _SetBBReg_CMD_ _Write_BBREG_CMD_ #define _GetRFReg_CMD_ _Read_RFREG_CMD_ #define _SetRFReg_CMD_ _Write_RFREG_CMD_ #endif /* _CMD_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1