Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Forest Bond | 1837 | 64.89% | 1 | 1.15% |
Malcolm Priestley | 928 | 32.78% | 70 | 80.46% |
Andres More | 45 | 1.59% | 6 | 6.90% |
Elise Lennion | 7 | 0.25% | 1 | 1.15% |
Gustavo A. R. Silva | 3 | 0.11% | 2 | 2.30% |
Rithvik Patibandla | 3 | 0.11% | 1 | 1.15% |
Amitoj Kaur Chawla | 3 | 0.11% | 1 | 1.15% |
Greg Kroah-Hartman | 2 | 0.07% | 2 | 2.30% |
Mikhail Golubev | 1 | 0.04% | 1 | 1.15% |
Marcos Paulo de Souza | 1 | 0.04% | 1 | 1.15% |
Valentina Manea | 1 | 0.04% | 1 | 1.15% |
Total | 2831 | 87 |
// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. * All rights reserved. * * File: card.c * Purpose: Provide functions to setup NIC operation mode * Functions: * vnt_set_rspinf - Set RSPINF * vnt_update_ifs - Update slotTime,SIFS,DIFS, and EIFS * vnt_update_top_rates - Update BasicTopRate * vnt_add_basic_rate - Add to BasicRateSet * vnt_ofdm_min_rate - Check if any OFDM rate is in BasicRateSet * vnt_get_tsf_offset - Calculate TSFOffset * vnt_get_current_tsf - Read Current NIC TSF counter * vnt_get_next_tbtt - Calculate Next Beacon TSF counter * vnt_reset_next_tbtt - Set NIC Beacon time * vnt_update_next_tbtt - Sync. NIC Beacon time * vnt_radio_power_off - Turn Off NIC Radio Power * vnt_radio_power_on - Turn On NIC Radio Power * * Revision History: * 06-10-2003 Bryan YC Fan: Re-write codes to support VT3253 spec. * 08-26-2003 Kyle Hsu: Modify the definition type of dwIoBase. * 09-01-2003 Bryan YC Fan: Add vnt_update_ifs(). * */ #include "device.h" #include "card.h" #include "baseband.h" #include "mac.h" #include "desc.h" #include "rf.h" #include "power.h" #include "key.h" #include "usbpipe.h" /* const u16 cw_rxbcntsf_off[MAX_RATE] = * {17, 34, 96, 192, 34, 23, 17, 11, 8, 5, 4, 3}; */ static const u16 cw_rxbcntsf_off[MAX_RATE] = { 192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3 }; /* * Description: Set NIC media channel * * Parameters: * In: * pDevice - The adapter to be set * connection_channel - Channel to be set * Out: * none */ void vnt_set_channel(struct vnt_private *priv, u32 connection_channel) { if (connection_channel > CB_MAX_CHANNEL || !connection_channel) return; /* clear NAV */ vnt_mac_reg_bits_on(priv, MAC_REG_MACCR, MACCR_CLRNAV); /* Set Channel[7] = 0 to tell H/W channel is changing now. */ vnt_mac_reg_bits_off(priv, MAC_REG_CHANNEL, 0xb0); vnt_control_out(priv, MESSAGE_TYPE_SELECT_CHANNEL, connection_channel, 0, 0, NULL); vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG, MAC_REG_CHANNEL, (u8)(connection_channel | 0x80)); } /* * Description: Get CCK mode basic rate * * Parameters: * In: * priv - The adapter to be set * rate_idx - Receiving data rate * Out: * none * * Return Value: response Control frame rate * */ static u16 vnt_get_cck_rate(struct vnt_private *priv, u16 rate_idx) { u16 ui = rate_idx; while (ui > RATE_1M) { if (priv->basic_rates & (1 << ui)) return ui; ui--; } return RATE_1M; } /* * Description: Get OFDM mode basic rate * * Parameters: * In: * priv - The adapter to be set * rate_idx - Receiving data rate * Out: * none * * Return Value: response Control frame rate * */ static u16 vnt_get_ofdm_rate(struct vnt_private *priv, u16 rate_idx) { u16 ui = rate_idx; dev_dbg(&priv->usb->dev, "%s basic rate: %d\n", __func__, priv->basic_rates); if (!vnt_ofdm_min_rate(priv)) { dev_dbg(&priv->usb->dev, "%s (NO OFDM) %d\n", __func__, rate_idx); if (rate_idx > RATE_24M) rate_idx = RATE_24M; return rate_idx; } while (ui > RATE_11M) { if (priv->basic_rates & (1 << ui)) { dev_dbg(&priv->usb->dev, "%s rate: %d\n", __func__, ui); return ui; } ui--; } dev_dbg(&priv->usb->dev, "%s basic rate: 24M\n", __func__); return RATE_24M; } /* * Description: Calculate TxRate and RsvTime fields for RSPINF in OFDM mode. * * Parameters: * In: * rate - Tx Rate * bb_type - Tx Packet type * Out: * tx_rate - pointer to RSPINF TxRate field * rsv_time- pointer to RSPINF RsvTime field * * Return Value: none * */ static void vnt_calculate_ofdm_rate(u16 rate, u8 bb_type, u8 *tx_rate, u8 *rsv_time) { switch (rate) { case RATE_6M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x9b; *rsv_time = 24; } else { *tx_rate = 0x8b; *rsv_time = 30; } break; case RATE_9M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x9f; *rsv_time = 16; } else { *tx_rate = 0x8f; *rsv_time = 22; } break; case RATE_12M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x9a; *rsv_time = 12; } else { *tx_rate = 0x8a; *rsv_time = 18; } break; case RATE_18M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x9e; *rsv_time = 8; } else { *tx_rate = 0x8e; *rsv_time = 14; } break; case RATE_36M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x9d; *rsv_time = 4; } else { *tx_rate = 0x8d; *rsv_time = 10; } break; case RATE_48M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x98; *rsv_time = 4; } else { *tx_rate = 0x88; *rsv_time = 10; } break; case RATE_54M: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x9c; *rsv_time = 4; } else { *tx_rate = 0x8c; *rsv_time = 10; } break; case RATE_24M: default: if (bb_type == BB_TYPE_11A) { *tx_rate = 0x99; *rsv_time = 8; } else { *tx_rate = 0x89; *rsv_time = 14; } break; } } /* * Description: Set RSPINF * * Parameters: * In: * pDevice - The adapter to be set * Out: * none * * Return Value: None. * */ void vnt_set_rspinf(struct vnt_private *priv, u8 bb_type) { struct vnt_phy_field phy[4]; u8 tx_rate[9] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; /* For OFDM */ u8 rsv_time[9] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; u8 data[34]; int i; /*RSPINF_b_1*/ vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_1M), PK_TYPE_11B, &phy[0]); /*RSPINF_b_2*/ vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_2M), PK_TYPE_11B, &phy[1]); /*RSPINF_b_5*/ vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_5M), PK_TYPE_11B, &phy[2]); /*RSPINF_b_11*/ vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_11M), PK_TYPE_11B, &phy[3]); /*RSPINF_a_6*/ vnt_calculate_ofdm_rate(RATE_6M, bb_type, &tx_rate[0], &rsv_time[0]); /*RSPINF_a_9*/ vnt_calculate_ofdm_rate(RATE_9M, bb_type, &tx_rate[1], &rsv_time[1]); /*RSPINF_a_12*/ vnt_calculate_ofdm_rate(RATE_12M, bb_type, &tx_rate[2], &rsv_time[2]); /*RSPINF_a_18*/ vnt_calculate_ofdm_rate(RATE_18M, bb_type, &tx_rate[3], &rsv_time[3]); /*RSPINF_a_24*/ vnt_calculate_ofdm_rate(RATE_24M, bb_type, &tx_rate[4], &rsv_time[4]); /*RSPINF_a_36*/ vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_36M), bb_type, &tx_rate[5], &rsv_time[5]); /*RSPINF_a_48*/ vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_48M), bb_type, &tx_rate[6], &rsv_time[6]); /*RSPINF_a_54*/ vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M), bb_type, &tx_rate[7], &rsv_time[7]); /*RSPINF_a_72*/ vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M), bb_type, &tx_rate[8], &rsv_time[8]); put_unaligned(phy[0].len, (u16 *)&data[0]); data[2] = phy[0].signal; data[3] = phy[0].service; put_unaligned(phy[1].len, (u16 *)&data[4]); data[6] = phy[1].signal; data[7] = phy[1].service; put_unaligned(phy[2].len, (u16 *)&data[8]); data[10] = phy[2].signal; data[11] = phy[2].service; put_unaligned(phy[3].len, (u16 *)&data[12]); data[14] = phy[3].signal; data[15] = phy[3].service; for (i = 0; i < 9; i++) { data[16 + i * 2] = tx_rate[i]; data[16 + i * 2 + 1] = rsv_time[i]; } vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_B_1, MESSAGE_REQUEST_MACREG, 34, &data[0]); } /* * Description: Update IFS * * Parameters: * In: * priv - The adapter to be set * Out: * none * * Return Value: None. * */ void vnt_update_ifs(struct vnt_private *priv) { u8 max_min = 0; u8 data[4]; if (priv->packet_type == PK_TYPE_11A) { priv->slot = C_SLOT_SHORT; priv->sifs = C_SIFS_A; priv->difs = C_SIFS_A + 2 * C_SLOT_SHORT; max_min = 4; } else { priv->sifs = C_SIFS_BG; if (priv->short_slot_time) { priv->slot = C_SLOT_SHORT; max_min = 4; } else { priv->slot = C_SLOT_LONG; max_min = 5; } priv->difs = C_SIFS_BG + 2 * priv->slot; } priv->eifs = C_EIFS; switch (priv->rf_type) { case RF_VT3226D0: if (priv->bb_type != BB_TYPE_11B) { priv->sifs -= 1; priv->difs -= 1; break; } /* fall through */ case RF_AIROHA7230: case RF_AL2230: case RF_AL2230S: if (priv->bb_type != BB_TYPE_11B) break; /* fall through */ case RF_RFMD2959: case RF_VT3226: case RF_VT3342A0: priv->sifs -= 3; priv->difs -= 3; break; case RF_MAXIM2829: if (priv->bb_type == BB_TYPE_11A) { priv->sifs -= 5; priv->difs -= 5; } else { priv->sifs -= 2; priv->difs -= 2; } break; } data[0] = (u8)priv->sifs; data[1] = (u8)priv->difs; data[2] = (u8)priv->eifs; data[3] = (u8)priv->slot; vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_SIFS, MESSAGE_REQUEST_MACREG, 4, &data[0]); max_min |= 0xa0; vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_CWMAXMIN0, MESSAGE_REQUEST_MACREG, 1, &max_min); } void vnt_update_top_rates(struct vnt_private *priv) { u8 top_ofdm = RATE_24M, top_cck = RATE_1M; u8 i; /*Determines the highest basic rate.*/ for (i = RATE_54M; i >= RATE_6M; i--) { if (priv->basic_rates & (u16)(1 << i)) { top_ofdm = i; break; } } priv->top_ofdm_basic_rate = top_ofdm; for (i = RATE_11M;; i--) { if (priv->basic_rates & (u16)(1 << i)) { top_cck = i; break; } if (i == RATE_1M) break; } priv->top_cck_basic_rate = top_cck; } int vnt_ofdm_min_rate(struct vnt_private *priv) { int ii; for (ii = RATE_54M; ii >= RATE_6M; ii--) { if ((priv->basic_rates) & ((u16)BIT(ii))) return true; } return false; } u8 vnt_get_pkt_type(struct vnt_private *priv) { if (priv->bb_type == BB_TYPE_11A || priv->bb_type == BB_TYPE_11B) return (u8)priv->bb_type; else if (vnt_ofdm_min_rate(priv)) return PK_TYPE_11GA; return PK_TYPE_11GB; } /* * Description: Calculate TSF offset of two TSF input * Get TSF Offset from RxBCN's TSF and local TSF * * Parameters: * In: * rx_rate - rx rate. * tsf1 - Rx BCN's TSF * tsf2 - Local TSF * Out: * none * * Return Value: TSF Offset value * */ u64 vnt_get_tsf_offset(u8 rx_rate, u64 tsf1, u64 tsf2) { return tsf1 - tsf2 - (u64)cw_rxbcntsf_off[rx_rate % MAX_RATE]; } /* * Description: Sync. TSF counter to BSS * Get TSF offset and write to HW * * Parameters: * In: * priv - The adapter to be sync. * time_stamp - Rx BCN's TSF * local_tsf - Local TSF * Out: * none * * Return Value: none * */ void vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate, u64 time_stamp, u64 local_tsf) { u64 tsf_offset = 0; u8 data[8]; tsf_offset = vnt_get_tsf_offset(rx_rate, time_stamp, local_tsf); data[0] = (u8)tsf_offset; data[1] = (u8)(tsf_offset >> 8); data[2] = (u8)(tsf_offset >> 16); data[3] = (u8)(tsf_offset >> 24); data[4] = (u8)(tsf_offset >> 32); data[5] = (u8)(tsf_offset >> 40); data[6] = (u8)(tsf_offset >> 48); data[7] = (u8)(tsf_offset >> 56); vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT, MESSAGE_REQUEST_TSF, 0, 8, data); } /* * Description: Read NIC TSF counter * Get local TSF counter * * Parameters: * In: * priv - The adapter to be read * Out: * current_tsf - Current TSF counter * * Return Value: true if success; otherwise false * */ bool vnt_get_current_tsf(struct vnt_private *priv, u64 *current_tsf) { *current_tsf = priv->current_tsf; return true; } /* * Description: Clear NIC TSF counter * Clear local TSF counter * * Parameters: * In: * priv - The adapter to be read * * Return Value: true if success; otherwise false * */ bool vnt_clear_current_tsf(struct vnt_private *priv) { vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL, TFTCTL_TSFCNTRST); priv->current_tsf = 0; return true; } /* * Description: Read NIC TSF counter * Get NEXTTBTT from adjusted TSF and Beacon Interval * * Parameters: * In: * tsf - Current TSF counter * beacon_interval - Beacon Interval * Out: * tsf - Current TSF counter * * Return Value: TSF value of next Beacon * */ u64 vnt_get_next_tbtt(u64 tsf, u16 beacon_interval) { u32 beacon_int; beacon_int = beacon_interval * 1024; /* Next TBTT = * ((local_current_TSF / beacon_interval) + 1) * beacon_interval */ if (beacon_int) { do_div(tsf, beacon_int); tsf += 1; tsf *= beacon_int; } return tsf; } /* * Description: Set NIC TSF counter for first Beacon time * Get NEXTTBTT from adjusted TSF and Beacon Interval * * Parameters: * In: * dwIoBase - IO Base * beacon_interval - Beacon Interval * Out: * none * * Return Value: none * */ void vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval) { u64 next_tbtt = 0; u8 data[8]; vnt_clear_current_tsf(priv); next_tbtt = vnt_get_next_tbtt(next_tbtt, beacon_interval); data[0] = (u8)next_tbtt; data[1] = (u8)(next_tbtt >> 8); data[2] = (u8)(next_tbtt >> 16); data[3] = (u8)(next_tbtt >> 24); data[4] = (u8)(next_tbtt >> 32); data[5] = (u8)(next_tbtt >> 40); data[6] = (u8)(next_tbtt >> 48); data[7] = (u8)(next_tbtt >> 56); vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT, MESSAGE_REQUEST_TBTT, 0, 8, data); } /* * Description: Sync NIC TSF counter for Beacon time * Get NEXTTBTT and write to HW * * Parameters: * In: * priv - The adapter to be set * tsf - Current TSF counter * beacon_interval - Beacon Interval * Out: * none * * Return Value: none * */ void vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf, u16 beacon_interval) { u8 data[8]; tsf = vnt_get_next_tbtt(tsf, beacon_interval); data[0] = (u8)tsf; data[1] = (u8)(tsf >> 8); data[2] = (u8)(tsf >> 16); data[3] = (u8)(tsf >> 24); data[4] = (u8)(tsf >> 32); data[5] = (u8)(tsf >> 40); data[6] = (u8)(tsf >> 48); data[7] = (u8)(tsf >> 56); vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT, MESSAGE_REQUEST_TBTT, 0, 8, data); dev_dbg(&priv->usb->dev, "%s TBTT: %8llx\n", __func__, tsf); } /* * Description: Turn off Radio power * * Parameters: * In: * priv - The adapter to be turned off * Out: * none * * Return Value: true if success; otherwise false * */ int vnt_radio_power_off(struct vnt_private *priv) { int ret = true; switch (priv->rf_type) { case RF_AL2230: case RF_AL2230S: case RF_AIROHA7230: case RF_VT3226: case RF_VT3226D0: case RF_VT3342A0: vnt_mac_reg_bits_off(priv, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3)); break; } vnt_mac_reg_bits_off(priv, MAC_REG_HOSTCR, HOSTCR_RXON); vnt_set_deep_sleep(priv); vnt_mac_reg_bits_on(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD); return ret; } /* * Description: Turn on Radio power * * Parameters: * In: * priv - The adapter to be turned on * Out: * none * * Return Value: true if success; otherwise false * */ int vnt_radio_power_on(struct vnt_private *priv) { int ret = true; vnt_exit_deep_sleep(priv); vnt_mac_reg_bits_on(priv, MAC_REG_HOSTCR, HOSTCR_RXON); switch (priv->rf_type) { case RF_AL2230: case RF_AL2230S: case RF_AIROHA7230: case RF_VT3226: case RF_VT3226D0: case RF_VT3342A0: vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3)); break; } vnt_mac_reg_bits_off(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD); return ret; } void vnt_set_bss_mode(struct vnt_private *priv) { if (priv->rf_type == RF_AIROHA7230 && priv->bb_type == BB_TYPE_11A) vnt_mac_set_bb_type(priv, BB_TYPE_11G); else vnt_mac_set_bb_type(priv, priv->bb_type); priv->packet_type = vnt_get_pkt_type(priv); if (priv->bb_type == BB_TYPE_11A) vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x03); else if (priv->bb_type == BB_TYPE_11B) vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x02); else if (priv->bb_type == BB_TYPE_11G) vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x08); vnt_update_ifs(priv); vnt_set_rspinf(priv, (u8)priv->bb_type); if (priv->bb_type == BB_TYPE_11A) { if (priv->rf_type == RF_AIROHA7230) { priv->bb_vga[0] = 0x20; vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xe7, priv->bb_vga[0]); } priv->bb_vga[2] = 0x10; priv->bb_vga[3] = 0x10; } else { if (priv->rf_type == RF_AIROHA7230) { priv->bb_vga[0] = 0x1c; vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0xe7, priv->bb_vga[0]); } priv->bb_vga[2] = 0x0; priv->bb_vga[3] = 0x0; } vnt_set_vga_gain_offset(priv, priv->bb_vga[0]); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1