Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Lennert Buytenhek | 3920 | 94.34% | 1 | 6.67% |
Haojian Zhuang | 179 | 4.31% | 2 | 13.33% |
Julia Lawall | 19 | 0.46% | 2 | 13.33% |
Jun Nie | 9 | 0.22% | 1 | 6.67% |
Vaishali Thakkar | 7 | 0.17% | 1 | 6.67% |
Jingoo Han | 7 | 0.17% | 1 | 6.67% |
Lubomir Rintel | 4 | 0.10% | 2 | 13.33% |
Dan Carpenter | 3 | 0.07% | 1 | 6.67% |
Joe Perches | 3 | 0.07% | 1 | 6.67% |
Luis R. Rodriguez | 2 | 0.05% | 1 | 6.67% |
Axel Lin | 2 | 0.05% | 2 | 13.33% |
Total | 4155 | 15 |
/* * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller * * Copyright (C) 2008 Marvell International Ltd. * All rights reserved. * * 2009-02-16 adapted from original version for PXA168/910 * Jun Nie <njun@marvell.com> * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/string.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/fb.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/uaccess.h> #include <video/pxa168fb.h> #include "pxa168fb.h" #define DEFAULT_REFRESH 60 /* Hz */ static int determine_best_pix_fmt(struct fb_var_screeninfo *var) { /* * Pseudocolor mode? */ if (var->bits_per_pixel == 8) return PIX_FMT_PSEUDOCOLOR; /* * Check for 565/1555. */ if (var->bits_per_pixel == 16 && var->red.length <= 5 && var->green.length <= 6 && var->blue.length <= 5) { if (var->transp.length == 0) { if (var->red.offset >= var->blue.offset) return PIX_FMT_RGB565; else return PIX_FMT_BGR565; } if (var->transp.length == 1 && var->green.length <= 5) { if (var->red.offset >= var->blue.offset) return PIX_FMT_RGB1555; else return PIX_FMT_BGR1555; } /* fall through */ } /* * Check for 888/A888. */ if (var->bits_per_pixel <= 32 && var->red.length <= 8 && var->green.length <= 8 && var->blue.length <= 8) { if (var->bits_per_pixel == 24 && var->transp.length == 0) { if (var->red.offset >= var->blue.offset) return PIX_FMT_RGB888PACK; else return PIX_FMT_BGR888PACK; } if (var->bits_per_pixel == 32 && var->transp.length == 8) { if (var->red.offset >= var->blue.offset) return PIX_FMT_RGBA888; else return PIX_FMT_BGRA888; } else { if (var->red.offset >= var->blue.offset) return PIX_FMT_RGB888UNPACK; else return PIX_FMT_BGR888UNPACK; } /* fall through */ } return -EINVAL; } static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt) { switch (pix_fmt) { case PIX_FMT_RGB565: var->bits_per_pixel = 16; var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; var->blue.offset = 0; var->blue.length = 5; var->transp.offset = 0; var->transp.length = 0; break; case PIX_FMT_BGR565: var->bits_per_pixel = 16; var->red.offset = 0; var->red.length = 5; var->green.offset = 5; var->green.length = 6; var->blue.offset = 11; var->blue.length = 5; var->transp.offset = 0; var->transp.length = 0; break; case PIX_FMT_RGB1555: var->bits_per_pixel = 16; var->red.offset = 10; var->red.length = 5; var->green.offset = 5; var->green.length = 5; var->blue.offset = 0; var->blue.length = 5; var->transp.offset = 15; var->transp.length = 1; break; case PIX_FMT_BGR1555: var->bits_per_pixel = 16; var->red.offset = 0; var->red.length = 5; var->green.offset = 5; var->green.length = 5; var->blue.offset = 10; var->blue.length = 5; var->transp.offset = 15; var->transp.length = 1; break; case PIX_FMT_RGB888PACK: var->bits_per_pixel = 24; var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 0; var->blue.length = 8; var->transp.offset = 0; var->transp.length = 0; break; case PIX_FMT_BGR888PACK: var->bits_per_pixel = 24; var->red.offset = 0; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 16; var->blue.length = 8; var->transp.offset = 0; var->transp.length = 0; break; case PIX_FMT_RGBA888: var->bits_per_pixel = 32; var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 0; var->blue.length = 8; var->transp.offset = 24; var->transp.length = 8; break; case PIX_FMT_BGRA888: var->bits_per_pixel = 32; var->red.offset = 0; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.offset = 16; var->blue.length = 8; var->transp.offset = 24; var->transp.length = 8; break; case PIX_FMT_PSEUDOCOLOR: var->bits_per_pixel = 8; var->red.offset = 0; var->red.length = 8; var->green.offset = 0; var->green.length = 8; var->blue.offset = 0; var->blue.length = 8; var->transp.offset = 0; var->transp.length = 0; break; } } static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var, struct fb_videomode *mode, int pix_fmt, int ystretch) { struct fb_info *info = fbi->info; set_pix_fmt(var, pix_fmt); var->xres = mode->xres; var->yres = mode->yres; var->xres_virtual = max(var->xres, var->xres_virtual); if (ystretch) var->yres_virtual = info->fix.smem_len / (var->xres_virtual * (var->bits_per_pixel >> 3)); else var->yres_virtual = max(var->yres, var->yres_virtual); var->grayscale = 0; var->accel_flags = FB_ACCEL_NONE; var->pixclock = mode->pixclock; var->left_margin = mode->left_margin; var->right_margin = mode->right_margin; var->upper_margin = mode->upper_margin; var->lower_margin = mode->lower_margin; var->hsync_len = mode->hsync_len; var->vsync_len = mode->vsync_len; var->sync = mode->sync; var->vmode = FB_VMODE_NONINTERLACED; var->rotate = FB_ROTATE_UR; } static int pxa168fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct pxa168fb_info *fbi = info->par; int pix_fmt; /* * Determine which pixel format we're going to use. */ pix_fmt = determine_best_pix_fmt(var); if (pix_fmt < 0) return pix_fmt; set_pix_fmt(var, pix_fmt); fbi->pix_fmt = pix_fmt; /* * Basic geometry sanity checks. */ if (var->xoffset + var->xres > var->xres_virtual) return -EINVAL; if (var->yoffset + var->yres > var->yres_virtual) return -EINVAL; if (var->xres + var->right_margin + var->hsync_len + var->left_margin > 2048) return -EINVAL; if (var->yres + var->lower_margin + var->vsync_len + var->upper_margin > 2048) return -EINVAL; /* * Check size of framebuffer. */ if (var->xres_virtual * var->yres_virtual * (var->bits_per_pixel >> 3) > info->fix.smem_len) return -EINVAL; return 0; } /* * The hardware clock divider has an integer and a fractional * stage: * * clk2 = clk_in / integer_divider * clk_out = clk2 * (1 - (fractional_divider >> 12)) * * Calculate integer and fractional divider for given clk_in * and clk_out. */ static void set_clock_divider(struct pxa168fb_info *fbi, const struct fb_videomode *m) { int divider_int; int needed_pixclk; u64 div_result; u32 x = 0; /* * Notice: The field pixclock is used by linux fb * is in pixel second. E.g. struct fb_videomode & * struct fb_var_screeninfo */ /* * Check input values. */ if (!m || !m->pixclock || !m->refresh) { dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n"); return; } /* * Using PLL/AXI clock. */ x = 0x80000000; /* * Calc divider according to refresh rate. */ div_result = 1000000000000ll; do_div(div_result, m->pixclock); needed_pixclk = (u32)div_result; divider_int = clk_get_rate(fbi->clk) / needed_pixclk; /* check whether divisor is too small. */ if (divider_int < 2) { dev_warn(fbi->dev, "Warning: clock source is too slow. " "Try smaller resolution\n"); divider_int = 2; } /* * Set setting to reg. */ x |= divider_int; writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV); } static void set_dma_control0(struct pxa168fb_info *fbi) { u32 x; /* * Set bit to enable graphics DMA. */ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); x &= ~CFG_GRA_ENA_MASK; x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0); /* * If we are in a pseudo-color mode, we need to enable * palette lookup. */ if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) x |= 0x10000000; /* * Configure hardware pixel format. */ x &= ~(0xF << 16); x |= (fbi->pix_fmt >> 1) << 16; /* * Check red and blue pixel swap. * 1. source data swap * 2. panel output data swap */ x &= ~(1 << 12); x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12; writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0); } static void set_dma_control1(struct pxa168fb_info *fbi, int sync) { u32 x; /* * Configure default bits: vsync triggers DMA, gated clock * enable, power save enable, configure alpha registers to * display 100% graphics, and set pixel command. */ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1); x |= 0x2032ff81; /* * We trigger DMA on the falling edge of vsync if vsync is * active low, or on the rising edge if vsync is active high. */ if (!(sync & FB_SYNC_VERT_HIGH_ACT)) x |= 0x08000000; writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1); } static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset) { struct pxa168fb_info *fbi = info->par; struct fb_var_screeninfo *var = &info->var; int pixel_offset; unsigned long addr; pixel_offset = (yoffset * var->xres_virtual) + xoffset; addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3)); writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0); } static void set_dumb_panel_control(struct fb_info *info) { struct pxa168fb_info *fbi = info->par; struct pxa168fb_mach_info *mi = dev_get_platdata(fbi->dev); u32 x; /* * Preserve enable flag. */ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001; x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28; x |= mi->gpio_output_data << 20; x |= mi->gpio_output_mask << 12; x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0; x |= mi->invert_composite_blank ? 0x00000040 : 0; x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0; x |= mi->invert_pix_val_ena ? 0x00000010 : 0; x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008; x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004; x |= mi->invert_pixclock ? 0x00000002 : 0; writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL); } static void set_dumb_screen_dimensions(struct fb_info *info) { struct pxa168fb_info *fbi = info->par; struct fb_var_screeninfo *v = &info->var; int x; int y; x = v->xres + v->right_margin + v->hsync_len + v->left_margin; y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin; writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL); } static int pxa168fb_set_par(struct fb_info *info) { struct pxa168fb_info *fbi = info->par; struct fb_var_screeninfo *var = &info->var; struct fb_videomode mode; u32 x; /* * Set additional mode info. */ if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) info->fix.visual = FB_VISUAL_PSEUDOCOLOR; else info->fix.visual = FB_VISUAL_TRUECOLOR; info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; info->fix.ypanstep = var->yres; /* * Disable panel output while we setup the display. */ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL); /* * Configure global panel parameters. */ writel((var->yres << 16) | var->xres, fbi->reg_base + LCD_SPU_V_H_ACTIVE); /* * convet var to video mode */ fb_var_to_videomode(&mode, &info->var); /* Calculate clock divisor. */ set_clock_divider(fbi, &mode); /* Configure dma ctrl regs. */ set_dma_control0(fbi); set_dma_control1(fbi, info->var.sync); /* * Configure graphics DMA parameters. */ x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH); x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3); writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH); writel((var->yres << 16) | var->xres, fbi->reg_base + LCD_SPU_GRA_HPXL_VLN); writel((var->yres << 16) | var->xres, fbi->reg_base + LCD_SPU_GZM_HPXL_VLN); /* * Configure dumb panel ctrl regs & timings. */ set_dumb_panel_control(info); set_dumb_screen_dimensions(info); writel((var->left_margin << 16) | var->right_margin, fbi->reg_base + LCD_SPU_H_PORCH); writel((var->upper_margin << 16) | var->lower_margin, fbi->reg_base + LCD_SPU_V_PORCH); /* * Re-enable panel output. */ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL); return 0; } static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) { return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset; } static u32 to_rgb(u16 red, u16 green, u16 blue) { red >>= 8; green >>= 8; blue >>= 8; return (red << 16) | (green << 8) | blue; } static int pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, unsigned int trans, struct fb_info *info) { struct pxa168fb_info *fbi = info->par; u32 val; if (info->var.grayscale) red = green = blue = (19595 * red + 38470 * green + 7471 * blue) >> 16; if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) { val = chan_to_field(red, &info->var.red); val |= chan_to_field(green, &info->var.green); val |= chan_to_field(blue , &info->var.blue); fbi->pseudo_palette[regno] = val; } if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) { val = to_rgb(red, green, blue); writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT); writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL); } return 0; } static int pxa168fb_blank(int blank, struct fb_info *info) { struct pxa168fb_info *fbi = info->par; fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1; set_dumb_panel_control(info); return 0; } static int pxa168fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { set_graphics_start(info, var->xoffset, var->yoffset); return 0; } static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id) { struct pxa168fb_info *fbi = dev_id; u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR); if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) { writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK), fbi->reg_base + SPU_IRQ_ISR); return IRQ_HANDLED; } return IRQ_NONE; } static struct fb_ops pxa168fb_ops = { .owner = THIS_MODULE, .fb_check_var = pxa168fb_check_var, .fb_set_par = pxa168fb_set_par, .fb_setcolreg = pxa168fb_setcolreg, .fb_blank = pxa168fb_blank, .fb_pan_display = pxa168fb_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; static int pxa168fb_init_mode(struct fb_info *info, struct pxa168fb_mach_info *mi) { struct pxa168fb_info *fbi = info->par; struct fb_var_screeninfo *var = &info->var; int ret = 0; u32 total_w, total_h, refresh; u64 div_result; const struct fb_videomode *m; /* * Set default value */ refresh = DEFAULT_REFRESH; /* try to find best video mode. */ m = fb_find_best_mode(&info->var, &info->modelist); if (m) fb_videomode_to_var(&info->var, m); /* Init settings. */ var->xres_virtual = var->xres; var->yres_virtual = info->fix.smem_len / (var->xres_virtual * (var->bits_per_pixel >> 3)); dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n", var->xres, var->yres); /* correct pixclock. */ total_w = var->xres + var->left_margin + var->right_margin + var->hsync_len; total_h = var->yres + var->upper_margin + var->lower_margin + var->vsync_len; div_result = 1000000000000ll; do_div(div_result, total_w * total_h * refresh); var->pixclock = (u32)div_result; return ret; } static int pxa168fb_probe(struct platform_device *pdev) { struct pxa168fb_mach_info *mi; struct fb_info *info = 0; struct pxa168fb_info *fbi = 0; struct resource *res; struct clk *clk; int irq, ret; mi = dev_get_platdata(&pdev->dev); if (mi == NULL) { dev_err(&pdev->dev, "no platform data defined\n"); return -EINVAL; } clk = devm_clk_get(&pdev->dev, "LCDCLK"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "unable to get LCDCLK"); return PTR_ERR(clk); } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no IO memory defined\n"); return -ENOENT; } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "no IRQ defined\n"); return -ENOENT; } info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev); if (info == NULL) { return -ENOMEM; } /* Initialize private data */ fbi = info->par; fbi->info = info; fbi->clk = clk; fbi->dev = info->dev = &pdev->dev; fbi->panel_rbswap = mi->panel_rbswap; fbi->is_blanked = 0; fbi->active = mi->active; /* * Initialise static fb parameters. */ info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN; info->node = -1; strlcpy(info->fix.id, mi->id, 16); info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.type_aux = 0; info->fix.xpanstep = 0; info->fix.ypanstep = 0; info->fix.ywrapstep = 0; info->fix.mmio_start = res->start; info->fix.mmio_len = resource_size(res); info->fix.accel = FB_ACCEL_NONE; info->fbops = &pxa168fb_ops; info->pseudo_palette = fbi->pseudo_palette; /* * Map LCD controller registers. */ fbi->reg_base = devm_ioremap_nocache(&pdev->dev, res->start, resource_size(res)); if (fbi->reg_base == NULL) { ret = -ENOMEM; goto failed_free_info; } /* * Allocate framebuffer memory. */ info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE); info->screen_base = dma_alloc_wc(fbi->dev, info->fix.smem_len, &fbi->fb_start_dma, GFP_KERNEL); if (info->screen_base == NULL) { ret = -ENOMEM; goto failed_free_info; } info->fix.smem_start = (unsigned long)fbi->fb_start_dma; set_graphics_start(info, 0, 0); /* * Set video mode according to platform data. */ set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1); fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist); /* * init video mode data. */ pxa168fb_init_mode(info, mi); /* * Fill in sane defaults. */ ret = pxa168fb_check_var(&info->var, info); if (ret) goto failed_free_fbmem; /* * enable controller clock */ clk_prepare_enable(fbi->clk); pxa168fb_set_par(info); /* * Configure default register values. */ writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR); writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL); writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1); writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN); writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0); writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1), fbi->reg_base + LCD_SPU_SRAM_PARA1); /* * Allocate color map. */ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { ret = -ENOMEM; goto failed_free_clk; } /* * Register irq handler. */ ret = devm_request_irq(&pdev->dev, irq, pxa168fb_handle_irq, IRQF_SHARED, info->fix.id, fbi); if (ret < 0) { dev_err(&pdev->dev, "unable to request IRQ\n"); ret = -ENXIO; goto failed_free_cmap; } /* * Enable GFX interrupt */ writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA); /* * Register framebuffer. */ ret = register_framebuffer(info); if (ret < 0) { dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret); ret = -ENXIO; goto failed_free_cmap; } platform_set_drvdata(pdev, fbi); return 0; failed_free_cmap: fb_dealloc_cmap(&info->cmap); failed_free_clk: clk_disable_unprepare(fbi->clk); failed_free_fbmem: dma_free_coherent(fbi->dev, info->fix.smem_len, info->screen_base, fbi->fb_start_dma); failed_free_info: kfree(info); dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret); return ret; } static int pxa168fb_remove(struct platform_device *pdev) { struct pxa168fb_info *fbi = platform_get_drvdata(pdev); struct fb_info *info; int irq; unsigned int data; if (!fbi) return 0; /* disable DMA transfer */ data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); data &= ~CFG_GRA_ENA_MASK; writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0); info = fbi->info; unregister_framebuffer(info); writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA); if (info->cmap.len) fb_dealloc_cmap(&info->cmap); irq = platform_get_irq(pdev, 0); dma_free_wc(fbi->dev, PAGE_ALIGN(info->fix.smem_len), info->screen_base, info->fix.smem_start); clk_disable_unprepare(fbi->clk); framebuffer_release(info); return 0; } static struct platform_driver pxa168fb_driver = { .driver = { .name = "pxa168-fb", }, .probe = pxa168fb_probe, .remove = pxa168fb_remove, }; module_platform_driver(pxa168fb_driver); MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> " "Green Wan <gwan@marvell.com>"); MODULE_DESCRIPTION("Framebuffer driver for PXA168/910"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1