Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Andrew Donnellan | 1904 | 86.08% | 1 | 25.00% |
Michael Ellerman | 307 | 13.88% | 2 | 50.00% |
Harish at linux.vnet.ibm | 1 | 0.05% | 1 | 25.00% |
Total | 2212 | 4 |
/* * Test the powerpc alignment handler on POWER8/POWER9 * * Copyright (C) 2017 IBM Corporation (Michael Neuling, Andrew Donnellan) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ /* * This selftest exercises the powerpc alignment fault handler. * * We create two sets of source and destination buffers, one in regular memory, * the other cache-inhibited (we use /dev/fb0 for this). * * We initialise the source buffers, then use whichever set of load/store * instructions is under test to copy bytes from the source buffers to the * destination buffers. For the regular buffers, these instructions will * execute normally. For the cache-inhibited buffers, these instructions * will trap and cause an alignment fault, and the alignment fault handler * will emulate the particular instruction under test. We then compare the * destination buffers to ensure that the native and emulated cases give the * same result. * * TODO: * - Any FIXMEs below * - Test VSX regs < 32 and > 32 * - Test all loads and stores * - Check update forms do update register * - Test alignment faults over page boundary * * Some old binutils may not support all the instructions. */ #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <assert.h> #include <getopt.h> #include <setjmp.h> #include <signal.h> #include <asm/cputable.h> #include "utils.h" int bufsize; int debug; int testing; volatile int gotsig; void sighandler(int sig, siginfo_t *info, void *ctx) { ucontext_t *ucp = ctx; if (!testing) { signal(sig, SIG_DFL); kill(0, sig); } gotsig = sig; #ifdef __powerpc64__ ucp->uc_mcontext.gp_regs[PT_NIP] += 4; #else ucp->uc_mcontext.uc_regs->gregs[PT_NIP] += 4; #endif } #define XFORM(reg, n) " " #reg " ,%"#n",%2 ;" #define DFORM(reg, n) " " #reg " ,0(%"#n") ;" #define TEST(name, ld_op, st_op, form, ld_reg, st_reg) \ void test_##name(char *s, char *d) \ { \ asm volatile( \ #ld_op form(ld_reg, 0) \ #st_op form(st_reg, 1) \ :: "r"(s), "r"(d), "r"(0) \ : "memory", "vs0", "vs32", "r31"); \ } \ rc |= do_test(#name, test_##name) #define LOAD_VSX_XFORM_TEST(op) TEST(op, op, stxvd2x, XFORM, 32, 32) #define STORE_VSX_XFORM_TEST(op) TEST(op, lxvd2x, op, XFORM, 32, 32) #define LOAD_VSX_DFORM_TEST(op) TEST(op, op, stxv, DFORM, 32, 32) #define STORE_VSX_DFORM_TEST(op) TEST(op, lxv, op, DFORM, 32, 32) #define LOAD_VMX_XFORM_TEST(op) TEST(op, op, stxvd2x, XFORM, 0, 32) #define STORE_VMX_XFORM_TEST(op) TEST(op, lxvd2x, op, XFORM, 32, 0) #define LOAD_VMX_DFORM_TEST(op) TEST(op, op, stxv, DFORM, 0, 32) #define STORE_VMX_DFORM_TEST(op) TEST(op, lxv, op, DFORM, 32, 0) #define LOAD_XFORM_TEST(op) TEST(op, op, stdx, XFORM, 31, 31) #define STORE_XFORM_TEST(op) TEST(op, ldx, op, XFORM, 31, 31) #define LOAD_DFORM_TEST(op) TEST(op, op, std, DFORM, 31, 31) #define STORE_DFORM_TEST(op) TEST(op, ld, op, DFORM, 31, 31) #define LOAD_FLOAT_DFORM_TEST(op) TEST(op, op, stfd, DFORM, 0, 0) #define STORE_FLOAT_DFORM_TEST(op) TEST(op, lfd, op, DFORM, 0, 0) #define LOAD_FLOAT_XFORM_TEST(op) TEST(op, op, stfdx, XFORM, 0, 0) #define STORE_FLOAT_XFORM_TEST(op) TEST(op, lfdx, op, XFORM, 0, 0) /* FIXME: Unimplemented tests: */ // STORE_DFORM_TEST(stq) /* FIXME: need two registers for quad */ // STORE_DFORM_TEST(stswi) /* FIXME: string instruction */ // STORE_XFORM_TEST(stwat) /* AMO can't emulate or run on CI */ // STORE_XFORM_TEST(stdat) /* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ /* preload byte by byte */ void preload_data(void *dst, int offset, int width) { char *c = dst; int i; c += offset; for (i = 0 ; i < width ; i++) c[i] = i; } int test_memcpy(void *dst, void *src, int size, int offset, void (*test_func)(char *, char *)) { char *s, *d; s = src; s += offset; d = dst; d += offset; assert(size == 16); gotsig = 0; testing = 1; test_func(s, d); /* run the actual test */ testing = 0; if (gotsig) { if (debug) printf(" Got signal %i\n", gotsig); return 1; } return 0; } void dumpdata(char *s1, char *s2, int n, char *test_name) { int i; printf(" %s: unexpected result:\n", test_name); printf(" mem:"); for (i = 0; i < n; i++) printf(" %02x", s1[i]); printf("\n"); printf(" ci: "); for (i = 0; i < n; i++) printf(" %02x", s2[i]); printf("\n"); } int test_memcmp(void *s1, void *s2, int n, int offset, char *test_name) { char *s1c, *s2c; s1c = s1; s1c += offset; s2c = s2; s2c += offset; if (memcmp(s1c, s2c, n)) { if (debug) { printf("\n Compare failed. Offset:%i length:%i\n", offset, n); dumpdata(s1c, s2c, n, test_name); } return 1; } return 0; } /* * Do two memcpy tests using the same instructions. One cachable * memory and the other doesn't. */ int do_test(char *test_name, void (*test_func)(char *, char *)) { int offset, width, fd, rc, r; void *mem0, *mem1, *ci0, *ci1; printf("\tDoing %s:\t", test_name); fd = open("/dev/fb0", O_RDWR); if (fd < 0) { printf("\n"); perror("Can't open /dev/fb0 now?"); return 1; } ci0 = mmap(NULL, bufsize, PROT_WRITE, MAP_SHARED, fd, 0x0); ci1 = mmap(NULL, bufsize, PROT_WRITE, MAP_SHARED, fd, bufsize); if ((ci0 == MAP_FAILED) || (ci1 == MAP_FAILED)) { printf("\n"); perror("mmap failed"); SKIP_IF(1); } rc = posix_memalign(&mem0, bufsize, bufsize); if (rc) { printf("\n"); return rc; } rc = posix_memalign(&mem1, bufsize, bufsize); if (rc) { printf("\n"); free(mem0); return rc; } rc = 0; /* offset = 0 no alignment fault, so skip */ for (offset = 1; offset < 16; offset++) { width = 16; /* vsx == 16 bytes */ r = 0; /* load pattern into memory byte by byte */ preload_data(ci0, offset, width); preload_data(mem0, offset, width); // FIXME: remove?? memcpy(ci0, mem0, bufsize); memcpy(ci1, mem1, bufsize); /* initialise output to the same */ /* sanity check */ test_memcmp(mem0, ci0, width, offset, test_name); r |= test_memcpy(ci1, ci0, width, offset, test_func); r |= test_memcpy(mem1, mem0, width, offset, test_func); if (r && !debug) { printf("FAILED: Got signal"); rc = 1; break; } r |= test_memcmp(mem1, ci1, width, offset, test_name); if (r && !debug) { printf("FAILED: Wrong Data"); rc = 1; break; } } if (rc == 0) printf("PASSED"); printf("\n"); munmap(ci0, bufsize); munmap(ci1, bufsize); free(mem0); free(mem1); close(fd); return rc; } static bool can_open_fb0(void) { int fd; fd = open("/dev/fb0", O_RDWR); if (fd < 0) return false; close(fd); return true; } int test_alignment_handler_vsx_206(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); printf("VSX: 2.06B\n"); LOAD_VSX_XFORM_TEST(lxvd2x); LOAD_VSX_XFORM_TEST(lxvw4x); LOAD_VSX_XFORM_TEST(lxsdx); LOAD_VSX_XFORM_TEST(lxvdsx); STORE_VSX_XFORM_TEST(stxvd2x); STORE_VSX_XFORM_TEST(stxvw4x); STORE_VSX_XFORM_TEST(stxsdx); return rc; } int test_alignment_handler_vsx_207(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_2_07)); printf("VSX: 2.07B\n"); LOAD_VSX_XFORM_TEST(lxsspx); LOAD_VSX_XFORM_TEST(lxsiwax); LOAD_VSX_XFORM_TEST(lxsiwzx); STORE_VSX_XFORM_TEST(stxsspx); STORE_VSX_XFORM_TEST(stxsiwx); return rc; } int test_alignment_handler_vsx_300(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_00)); printf("VSX: 3.00B\n"); LOAD_VMX_DFORM_TEST(lxsd); LOAD_VSX_XFORM_TEST(lxsibzx); LOAD_VSX_XFORM_TEST(lxsihzx); LOAD_VMX_DFORM_TEST(lxssp); LOAD_VSX_DFORM_TEST(lxv); LOAD_VSX_XFORM_TEST(lxvb16x); LOAD_VSX_XFORM_TEST(lxvh8x); LOAD_VSX_XFORM_TEST(lxvx); LOAD_VSX_XFORM_TEST(lxvwsx); LOAD_VSX_XFORM_TEST(lxvl); LOAD_VSX_XFORM_TEST(lxvll); STORE_VMX_DFORM_TEST(stxsd); STORE_VSX_XFORM_TEST(stxsibx); STORE_VSX_XFORM_TEST(stxsihx); STORE_VMX_DFORM_TEST(stxssp); STORE_VSX_DFORM_TEST(stxv); STORE_VSX_XFORM_TEST(stxvb16x); STORE_VSX_XFORM_TEST(stxvh8x); STORE_VSX_XFORM_TEST(stxvx); STORE_VSX_XFORM_TEST(stxvl); STORE_VSX_XFORM_TEST(stxvll); return rc; } int test_alignment_handler_integer(void) { int rc = 0; SKIP_IF(!can_open_fb0()); printf("Integer\n"); LOAD_DFORM_TEST(lbz); LOAD_DFORM_TEST(lbzu); LOAD_XFORM_TEST(lbzx); LOAD_XFORM_TEST(lbzux); LOAD_DFORM_TEST(lhz); LOAD_DFORM_TEST(lhzu); LOAD_XFORM_TEST(lhzx); LOAD_XFORM_TEST(lhzux); LOAD_DFORM_TEST(lha); LOAD_DFORM_TEST(lhau); LOAD_XFORM_TEST(lhax); LOAD_XFORM_TEST(lhaux); LOAD_XFORM_TEST(lhbrx); LOAD_DFORM_TEST(lwz); LOAD_DFORM_TEST(lwzu); LOAD_XFORM_TEST(lwzx); LOAD_XFORM_TEST(lwzux); LOAD_DFORM_TEST(lwa); LOAD_XFORM_TEST(lwax); LOAD_XFORM_TEST(lwaux); LOAD_XFORM_TEST(lwbrx); LOAD_DFORM_TEST(ld); LOAD_DFORM_TEST(ldu); LOAD_XFORM_TEST(ldx); LOAD_XFORM_TEST(ldux); LOAD_DFORM_TEST(lmw); STORE_DFORM_TEST(stb); STORE_XFORM_TEST(stbx); STORE_DFORM_TEST(stbu); STORE_XFORM_TEST(stbux); STORE_DFORM_TEST(sth); STORE_XFORM_TEST(sthx); STORE_DFORM_TEST(sthu); STORE_XFORM_TEST(sthux); STORE_XFORM_TEST(sthbrx); STORE_DFORM_TEST(stw); STORE_XFORM_TEST(stwx); STORE_DFORM_TEST(stwu); STORE_XFORM_TEST(stwux); STORE_XFORM_TEST(stwbrx); STORE_DFORM_TEST(std); STORE_XFORM_TEST(stdx); STORE_DFORM_TEST(stdu); STORE_XFORM_TEST(stdux); STORE_DFORM_TEST(stmw); return rc; } int test_alignment_handler_integer_206(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); printf("Integer: 2.06\n"); LOAD_XFORM_TEST(ldbrx); STORE_XFORM_TEST(stdbrx); return rc; } int test_alignment_handler_vmx(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap(PPC_FEATURE_HAS_ALTIVEC)); printf("VMX\n"); LOAD_VMX_XFORM_TEST(lvx); /* * FIXME: These loads only load part of the register, so our * testing method doesn't work. Also they don't take alignment * faults, so it's kinda pointless anyway * LOAD_VMX_XFORM_TEST(lvebx) LOAD_VMX_XFORM_TEST(lvehx) LOAD_VMX_XFORM_TEST(lvewx) LOAD_VMX_XFORM_TEST(lvxl) */ STORE_VMX_XFORM_TEST(stvx); STORE_VMX_XFORM_TEST(stvebx); STORE_VMX_XFORM_TEST(stvehx); STORE_VMX_XFORM_TEST(stvewx); STORE_VMX_XFORM_TEST(stvxl); return rc; } int test_alignment_handler_fp(void) { int rc = 0; SKIP_IF(!can_open_fb0()); printf("Floating point\n"); LOAD_FLOAT_DFORM_TEST(lfd); LOAD_FLOAT_XFORM_TEST(lfdx); LOAD_FLOAT_DFORM_TEST(lfdu); LOAD_FLOAT_XFORM_TEST(lfdux); LOAD_FLOAT_DFORM_TEST(lfs); LOAD_FLOAT_XFORM_TEST(lfsx); LOAD_FLOAT_DFORM_TEST(lfsu); LOAD_FLOAT_XFORM_TEST(lfsux); STORE_FLOAT_DFORM_TEST(stfd); STORE_FLOAT_XFORM_TEST(stfdx); STORE_FLOAT_DFORM_TEST(stfdu); STORE_FLOAT_XFORM_TEST(stfdux); STORE_FLOAT_DFORM_TEST(stfs); STORE_FLOAT_XFORM_TEST(stfsx); STORE_FLOAT_DFORM_TEST(stfsu); STORE_FLOAT_XFORM_TEST(stfsux); STORE_FLOAT_XFORM_TEST(stfiwx); return rc; } int test_alignment_handler_fp_205(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_05)); printf("Floating point: 2.05\n"); LOAD_FLOAT_DFORM_TEST(lfdp); LOAD_FLOAT_XFORM_TEST(lfdpx); LOAD_FLOAT_XFORM_TEST(lfiwax); STORE_FLOAT_DFORM_TEST(stfdp); STORE_FLOAT_XFORM_TEST(stfdpx); return rc; } int test_alignment_handler_fp_206(void) { int rc = 0; SKIP_IF(!can_open_fb0()); SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); printf("Floating point: 2.06\n"); LOAD_FLOAT_XFORM_TEST(lfiwzx); return rc; } void usage(char *prog) { printf("Usage: %s [options]\n", prog); printf(" -d Enable debug error output\n"); printf("\n"); printf("This test requires a POWER8 or POWER9 CPU and a usable "); printf("framebuffer at /dev/fb0.\n"); } int main(int argc, char *argv[]) { struct sigaction sa; int rc = 0; int option = 0; while ((option = getopt(argc, argv, "d")) != -1) { switch (option) { case 'd': debug++; break; default: usage(argv[0]); exit(1); } } bufsize = getpagesize(); sa.sa_sigaction = sighandler; sigemptyset(&sa.sa_mask); sa.sa_flags = SA_SIGINFO; if (sigaction(SIGSEGV, &sa, NULL) == -1 || sigaction(SIGBUS, &sa, NULL) == -1 || sigaction(SIGILL, &sa, NULL) == -1) { perror("sigaction"); exit(1); } rc |= test_harness(test_alignment_handler_vsx_206, "test_alignment_handler_vsx_206"); rc |= test_harness(test_alignment_handler_vsx_207, "test_alignment_handler_vsx_207"); rc |= test_harness(test_alignment_handler_vsx_300, "test_alignment_handler_vsx_300"); rc |= test_harness(test_alignment_handler_integer, "test_alignment_handler_integer"); rc |= test_harness(test_alignment_handler_integer_206, "test_alignment_handler_integer_206"); rc |= test_harness(test_alignment_handler_vmx, "test_alignment_handler_vmx"); rc |= test_harness(test_alignment_handler_fp, "test_alignment_handler_fp"); rc |= test_harness(test_alignment_handler_fp_205, "test_alignment_handler_fp_205"); rc |= test_harness(test_alignment_handler_fp_206, "test_alignment_handler_fp_206"); return rc; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1